Adding Tab in VL02n in Header Level

HI all,
I have to add a tab in header level with two fields in VL02n..
HOw to do this?

Hi - Yes it should be available to VL01N and VL03N. Please provide the ef_position in the method ACTIVATE_TAB_PAGE
   CONSTANTS: lc_caption TYPE char40 VALUE 'Gate Entry Detail',
             lc_position TYPE int4 VALUE 13,
             lc_program TYPE syrepid VALUE 'SAPLZVL02N_CUST',
             lc_dynpro   TYPE sydynnr VALUE '9100'.
* Pass the values of the subscreen for Additional Header Tab.
ef_caption = lc_caption.
ef_position = lc_position.
ef_program = lc_program.
ef_dynpro   = lc_dynpro.

Similar Messages

How to Configure Invoice Address tab on Purchase Order - Header Level

Hi Gurus
Please assist
My client want to add the Invoice address on the Purchase Order level Tab, it must be automatically pull through to all the Purchase Orders as they have one Invoicing address.
Currently the suppliers send invoices to plants instead of HEAD OFFICE for payment
Regards
Susan

Hi,
Tax condtions shd be given by functional consultants.ABAPers cant decide the tax condtions.
you can have these condtions in KONV table.
In item level vbrp-posnr = konv-kposn.
ekpo-ebelp = konv-kposn
at header level as said in the below thread
Just see this and get back if any concerns
Regards
Edited by: Rasheed salman on Dec 2, 2008 6:20 AM
Edited by: Rasheed salman on Dec 2, 2008 6:22 AM

How to add a new tab to sales order header level

Hello Experts,
I have to add a new tab 'Billing Plan' at sales order header level.
As per my functional person, If I modify TVAK-FPART field with some value than tab will be come.
I tried to modify TVAK-FPART field in debug mode and was able to see the tab, BUT when I again came back to
VA03/VA03 transaction then that tab was not there.
Pls help me to resolve this problem..
Rocks!!

Hello Rock,
I have the similar requirement, to add a new tab at the sales order item level. there are already two customer tabs but i dont want to use them, instead i want to use a new tab to be created. i searched BADIs but the BADI BADI_SD_TAB_CUST_I is for SAP Internal use only.
Kindly suggest whay way you used to create a new tab. thanks in advance.
Reagrds
Sachin

Adding TAB to purchase order header

I need to add a tab with additional fields to a purchase order header.
I know that I need to use a BAdI to do it but i do not know the procedure I need to follow.
Hope you can help me

sorry, I'm talking about the screen painter where you have changed SAPMV45A screen 4002.
Actually, I have had a look at screen 4002 and see that the tabstrip alrady exists so the wizard is no use to you here.
The error you are getting is because TAXI_TABSTRIP_CAPTIONS is a dictionary declared structure which has 32 fields. You cannot use a 'data' declaration of something which already exists. I don't know why you are trying to add the 33rd one but it doesn't look right to me to be trying.
If you really do have a need to change it then you will have to change the TAXI_TABSTRIP_CAPTIONS structure in the dictionary itself via SE11.

Adding Tab to VL02N Transaction Using BDT

Hi All,
Can any one tell me how to add TAB to the transaction VL02N using BDT.
Let me know the steps to add tab.
Function guys knows very well about BDT if any one can tell me this it will be appreciated.
Thanks in Advance

Hello ,
i think u need to check in the config to find out custom tabs for BP transaction and also check tcode BUPT by using BDT u can insert ur custom screen tab in BP.
regards
Prabhu

Adding new field in ME21N items level NO ADDITIONAL TAB or SUBSCREEN

Hello Gurus!!
I have a requirement where I am just trying to add a new field ZZ*** at Item level in ME21N (and no new tabs please)
I got the modification key and now wat i see is that in screen 1211 SAP has some field mappings with metadata.
Refer to Include LMEMFSF0T.
Can you please help me how sud i proceed or wat can be an alternate way out to solve.
regards,
Prasenjit Singh Bist

Hi,
     Another way of doing the same is to use screen-exits for the transaction. You can use the standard enhancement MM06E005 in SMOD for the Purchasing related custom fields. You can add the fields in the screens 0101, 0111 of program SAPLXM06 to get the fields in the tab 'Customer Data' at header level and item level for ME* transactions.
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
                    are the function modules where u need to do the coding.
and the fields u have added need to be included in the includes
CI_EKKODB
CI_EKPODB
of EKKO and EKPO for header level and item level respectively.
Regards,
Vishnu Priya
Message was edited by:
        Vishnu priya
Message was edited by:
        Vishnu priya

Adding field in ME21N po header

Hi All,
I have added field on ME21N on header level.
I used below screen exit
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
and added fields to structure CI_EKKODB. Field is created on ME21N but table is not updating.
can you please let me know what and where should I write the code to update the table.

Hi Atul,
I have added below code as adviced by you.
EXIT_SAPMM06E_008 ( include ZXM06U37)
e_ci_ekko = ekko_ci.
EXIT_SAPMM06E_006 ( INCLUDE ZXM06U36)
ekko_ci = i_ci_ekko.
it still not updating ekko table for these fields.
How can I put logic in PBO even of screen 101 for enabling this.
Please help.

Adding a new tab in the header level of me51n

Hi gurus
I want to add a new tab in the header level of purchase requisation (me51n/me52n) , where i want to add some new customer fileds and i will update those in a z table.
how can i do it . please give the complete code if possible .
thnks in advance.
regards
amarendra

you can try the enhancement MM06E005, based on the Document category you can show the fields on the screen.

Issue in adding new tab in PO Header Level on ME21N

Hello,
As there are many thread where it has mention how to implement badi to get the required output.
Similarly, i had used the badi ME_GUI_PO_CUST and the method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
My Doubt :
From the below sample code, from where i have to create the subscreen, Program name.
For ME21N the program name in status is showing SAPLMEGUI.
Sample Code from other thread and my doubts are next to it..
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscribe-name = 'SAPLZPONEWTAB'.   "This is the name of subscreen but it shows the standard one (shall i create a program and then add a subscreen and use here?)
ls_subscribe-dynpro = '9000'.
ls_subscribe-program = 'SAPLZPONEWTAB'. "Shall i use the program name SAPLMEGUI here
ls_subscribe-struct_name = 'ZPONEWTAB'.    "Why this is required, as in my case i want to show some fields from EKKO table
ls_subscribe-label = text-001.
ls_subscribe-position = 15.
ls_subscribe-height = 7.
append ls_subscribe to re_subscribers.
Please advice...

Hi,
Thanks for the reply.
I have done the things..but, i can't see the tab in the header level.
Below is my code with my comment.
Note :
I created a Function Group by name SAPLZPOHEADER.
In se80 by giving the name ZPOHEADER i created a subscreen. Also created a structure as ZPOHEADER using it displayed the fields in the screen.
Code under IF_EX_ME_GUI_PO_CUST~SUBSCRIBE :
DATA: ls_subscriber LIKE LINE OF re_subscribers.
      CLEAR: re_subscribers.
      REFRESH: re_subscribers.
IF im_application = 'PO' AND im_element = 'HEADER'.
    CLEAR re_subscribers[].
   ls_subscriber-name = subscreen1. "As per the sample code i double click and set the attributes of it as same as sample code.
   ls_subscriber-dynpro = '9000'. "This is the screen no
   ls_subscriber-program = 'SAPLZPOHEADER'.   "Name of the FM Group/Program
   ls_subscriber-struct_name = 'ZPOHEADER'.     "Structure Name
   ls_subscriber-label = text-001. "Created label as 'doc header'
   ls_subscriber-position = 11.    "Given the position as i want after 'status' in ME21N
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
Is anything remaining as in debug mode it fills the re_subscribers and go the 'Create Object' but, can see it in display.
Pls help...

TO ADD TAB AT HEADER LEVEL IN ME21N

Hi guys
I have to add a tab at header level of ME21N using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST
can someone guide me how to do this?
Thanks

Hi,
Try with SMOD enhancement MM06E005. I know this works well for adding a tab in PO header or item level . Read OSS 407975 for implementing this screen exit
here i am pasting OSS Notes and if you need clearly then login into service.sap.com
Symptom
You are using SAP customer enhancement MM06E005. There is no sample source code for this enhancement.
Other terms
User exit, customer enhancement, MM06E005, example, sample
Reason and Prerequisites
You want to activate user exit MM06E005. Note that this is a consulting note and not a correction of the user exit.
Solution
You can use the sample source code attached here to recognize the basic functions of the exit. This example is, however, only one of many options that are offered by the customer enhancement.
The sample source code includes the following functions:
Supply of an additional field on header level
Supply of an additional field on item level
Derivation of a field on item level from the copied reference document
Now, in order to be able to use the sample source code, you must create field ZZFLAG on the header level of the document and field ZZFIELD on the item level.
Double-click on Include table CI_EKKODB
Enter the following values:
Name    Component type DType Length DecPlace Short text
ZZFLAG CHAR1          CHAR 1      0        1-digit indicator
Save and activate the include table.
Double-click on Include table CI_EKPODB
Enter the following values:
Name    Component type DType Length DecPlace Short Text
ZZFIELD CHAR1          CHAR 1      0        1-digit indicator
Save and activate the include table.
In order to activate the sample source code, you additionally have to carry out the following changes on screens 0101 and 0111.
1. Screen 0101: Create the following fields:
              "Checkbox"            Name: EKKO_CI-ZZFLAG
2. Screen 0111: Create the following fields:
              "Input/output field" Name: EKPO_CI-ZZFIELD
              "Pushbutton"          Name: BUTTON
                                    FctCode: ZZDETERMINE
The following assignments apply to the sample source code:
EXIT_SAPMM06E_006 --> LXM06F36
EXIT_SAPMM06E_007 --> LXM06F38
EXIT_SAPMM06E_008 --> LXM06F37
EXIT_SAPMM06E_009 --> LXM06F39
EXIT_SAPMM06E_016 --> LXM06F41
EXIT_SAPMM06E_017 --> LXM06F42
EXIT_SAPMM06E_018 --> LXM06F40
Copy the source code from the attachment and insert it into the corresponding function modules. Save and activate the function modules.
Create the following variables in the corresponding TOP include in order not to get any syntax errors:
INCLUDE ZXM06TOP
data: gl_aktyp type c,
      gl_no_screen type c,
      gl_rekko like ekko,
      gl_ekko_ci like ekko_ci,
      gl_ekpo_ci like ekpo_ci,
      gl_ekpo like ekpo,
      gl_ucomm like sy-ucomm.
types: begin of ekpo_tab,
          ebeln like ekpo-ebeln,
          ebelp like ekpo-ebelp,
          ekpo like ekpo,
       end of ekpo_tab.
data: gt_ref_ekpo_tab type table of ekpo_tab.
Save and activate the TOP include.
On header level, you can now store a character, X or space, via field ZZFLAG on the database with the document and read it also again.
On item level, you can fill field ZZFIELD with a one-digit value and save it with the document. If you copy this document, the system displays an additional function button on tab page "Customer data". If you press this button, the value of the reference document is copied to field ZZFIELD.
If you want to store the source code as sample source code in your system, start Transaction SMOD. Enter MM06E005 as an enhancement. Select "Components". Press "Change". Position the cursor on the corresponding module and choose "Sample code". Create the corresponding include and copy the source code from the note. Save the include. Note that, of course, syntax errors may occur when you check components. This is because the includes of the sample code are not integrated into a program but rather are completely independent and, therefore, do not have any relationship to each other either. For this reason, only save the include and do not activate or check it. The sample code has to be copied into the corresponding function modules in order to become active.
If you use the user exit in the new purchase order, it is not guaranteed that the customer screen is always processed. To make sure that possible required fields are checked, include a corresponding message into the EXIT_SAPMM06E_012. This screen is always processed.
Header Data
Release Status: Released for Customer
Released on: 07.09.2006 13:07:34
Priority: Recommendations/additional info
Category: Consulting
Primary Component: MM-PUR-PO Purchase Orders
Secondary Components: MM-PUR-GF-CE Customer Enhancements
I have not done BADI for PO,so i am not sure that whether BADI will work for Screen exit or not
Thanks
Seshu

New Tab on header level for me21n/me22n/me23n

Hi Friends
i have created a new tab on the me21n/me22n/me23n header level using the exit
MM06E005 , The tab is displayed but i am not unable to udate the records into the
EKKO Table whereas i have added my field in the include of EKKO CL_EKKODB
Kindly somebody help me with elaborated steps .
Thanks & Regards
Digvijay Rai

Hi Digvijay,
Once the data is entered on the screen ..code is written to update the table ie...
flow of data from custom screen for header is OK..but for display and change we need to
import the data in a similar manner to the customer subscreen or the tab added in header level
As you can see the following 3...code must be done in EXIT_SAPMM06E_006/007 to fetch data to customer subscreen for display/change actions..use 006/007 for PBO/PAI actions..
EXIT_SAPMM06E_006   Export data to customer subscreen for header(PBO)....INCLUDE ZXM06U36
EXIT_SAPMM06E_007   Export data to customer subscreen for header(PAI)....INCLUDE ZXM06U38 .
EXIT_SAPMM06E_008   Import data from customer subscreen for header
Pls check and revert..in addition
go to smod->MM06E005-> "documentation" -> Display to read more on documentation about data flows and exits used for it
Hope it helps
Regards
Byju

Additional tab at header level in ME21N through BADI ME_GUI_PO_CUST

Hi,
I want to have additional tab at header level in ME21n through BADI ME_GUI_PO_CUST. But after all effort I am not getting display of tab. Let me explain what i did till now
1. Appended table EKKO with field
2. Create one function Group -under that
A. Created one Include u2013Paste the code given
DATA: call_subscreen   TYPE sy-dynnr,
      call_prog        TYPE sy-repid,
      call_view        TYPE REF TO cl_screen_view_mm,
      call_view_stack TYPE REF TO cl_screen_view_mm OCCURS 0,
      global_framework TYPE REF TO cl_framework_mm,
      global_help_view TYPE REF TO cl_screen_view_mm,
      global_help_prog TYPE sy-repid.
FORM SET_SUBSCREEN_AND_PROG *
--> DYNNR *
--> PROG *
--> VIEW *
--> TO *
--> CL_SCREEN_VIEW_MM *
FORM set_subscreen_and_prog USING dynnr TYPE sy-dynnr
prog TYPE sy-repid
view TYPE REF TO cl_screen_view_mm.
call_subscreen = dynnr.
call_prog = prog.
call_view = view.
ENDFORM. "set_subscreen_and_prog
B. Created one screen (9000)
3. Implemented BADI ME_GUI_PO_CUST and paste the code.
data: ls_subscribe like line of re_subscribers.
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscribe-name = ' ZMMSCR1'.
ls_subscribe-dynpro = '9000'.
ls_subscribe-program = ' ZMMSCR1'.
ls_subscribe-struct_name = 'EKKO'.
ls_subscribe-label = text-001..
ls_subscribe-position = 15.
ls_subscribe-height = 7.
append ls_subscribe to re_subscribers.
Please help me what s going wrong .and what else I will do to get success.
Edited by: Vishal A Vijaywargia on Jul 29, 2009 2:24 AM

Hi Prosengit,
I am not aure about u r BADI,
BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
IN thi senhancement u have thrre screen exits.In this enhancement
SAPMM06E        0111 CUSTSCR1 SAPLXM06        0111 Subscreen: PO item
u can add subscreen and u can add u r own fields here .
and u can write u r code in 'EXIT_SAPMM06E_006'.
if u want to change the title of the program.
Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
I hope this solves u r problem.

BADI ME_GUI_PO_CUST-- Data not getting saved after adding tab at Header

Hi,
My requirement is to add an additional tab at header level and a field in that tab. I used the BADI ME_GUI_PO_CUST and implemented it. I can see the tab and the field in it at header level.But when i try to save it , its popping up message 'Data is not changed' and when i check in ME22N, changes are not reflected. I went through the example and copied this example into BADI and accordingly made changes for header. When i keep break-point in TRANSPORT_FROM_MODEL and other methods except SUBSCRIBE and MAP_DYNPRO_FIELDS,its not stopping. Please guide where i am going wrong.
Regards
K Srinivas

HI,
Use the perform
perform set_header_data(saplmepo) using ekko.
Thanks,
Shailaja Ainala.

Adding Variant in Header Level in the Sales Order

Field "Card Verification Value" (CVV) is part of the Standard from Support Package SAPKH47028 onwards. But if you like you can use a variant for screen SAPMV45A4440 and set
field "Card Verif.Code" to invisible in this variant.
This is the reply from SAP after implementing the new support pack. Now there is an additional field in VA01 that I am trying to remove.
I can add the variant in Table Settings but that is on Item Level in the Sales Order (VA01). How do I do it in Header Level?

Hi,
Go to SHD0 ,write down the Transaction code , transaction variant then go to Tab " With Processing'.
Now you will be in T Code VA01 ,press enter and you will get all the variants maintained in Header Level.
Now you can activate / deactivate as per your requirement.
Best Regards,
Ankur

Custom field at Header level in Additional Data B tab of VA01/VA02

Kindly help me out , I have a requirement to add a custom field at Header level in Additional Data B tab of VA01/VA02.
Program: SAPMV45A
screen 8459
This can be done only through access key or not. Can any body tell me procedure to do that.
Appreciate your response.Thanks in advance

Please help me out this

Adding Tab in VL02n in Header Level

Similar Messages

Maybe you are looking for