Adding Tab to VL02N Transaction Using BDT

Hi All,
Can any one tell me how to add TAB to the transaction VL02N using BDT.
Let me know the steps to add tab.
Function guys knows very well about BDT if any one can tell me this it will be appreciated.
Thanks in Advance

Hello ,
i think u need to check in the config to find out custom tabs for BP transaction and also check tcode BUPT by using BDT u can insert ur custom screen tab in BP.
regards
Prabhu

Similar Messages

  • Hiding a field in Address tab of Business Partner Using BDT

    Hi,
    I want to Hide the title field in the Business Partner transaction, which exists in the Address Tab using BDT.
    Could you please let me know whether i need to create a custom screen for this or is there any other way where we can modify the predefined screen directly?
      Kindly help me regarding.
    Thanks and Regards,
    Gopi.

    Hi Gopinath,
    Please go through this link..,
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/696d360856e808e10000009b38f839/frameset.htm
    This is the introduction regarding BDT ( Business Data Toolset)
    Here you will find some information, I think it may help you.
    Cheers,
    Swamy Kunche

  • Adding Tab in VL02n in Header Level

    HI all,
    I have to add a tab in header level with two fields in VL02n..
    HOw to do this?

    Hi - Yes it should be available to VL01N and VL03N. Please provide the ef_position in the method ACTIVATE_TAB_PAGE
       CONSTANTS: lc_caption  TYPE char40 VALUE 'Gate Entry Detail',
                 lc_position TYPE int4 VALUE 13,
                 lc_program  TYPE syrepid VALUE 'SAPLZVL02N_CUST',
                 lc_dynpro   TYPE sydynnr VALUE '9100'.
    * Pass the values of the subscreen for Additional Header Tab.
      ef_caption  = lc_caption.
      ef_position = lc_position.
      ef_program  = lc_program.
      ef_dynpro   = lc_dynpro.

  • Adding custom field in sales tab of BP transaction

    Hi Experts,
    There is a requirement to add a custom field in sales tab of BP transaction in 'Sales area data', above the field 'Customer group 1'.
    Is it possible with BDT,else any other method to handle the procedure.
    I think it is not possible with EEWB to add field in this screen of BP. Please correct me if am wrong.
    Thanking you in anticipation.
    Regards,
    Santosh

    Hi Santosh,
    Refer the link **************** - Step by step procedure to enhance the BP using BDT.
    Thanks,
    Ritu

  • How to Use EEWB in adding custom fields in transactions

    I have seen some tutorials on the net on how to customized transactions using EEWB. But it seems that CRM related transactions were the only examples I have seen. Is it possible to use EEWB in ANY transaction we wish to customize? We are planning to add custom fields in a Solution Manager transaction.

    Hi,
    I guess it depends on what transaction you want to add the field to. If for example you want to use transaction CRMD_ORDER (for processing issues, messages etc.) then EEWB fields created for table CRMD_ORDERADM_H will automatically be added in this transaction in a special tab called "Customer fields" (or something like that anyway).
    /Anders

  • Adding a field in tab screen of transaction FPCJ

    Hi All,
    I have a requirement wherein i have to add a field called authorization number (AUNUM) of tableDFKKOPC at the CREDIT CARD PAYMENT  tab in the transaction FPCJ. is there any screen enhancement or BADI or any other method to achieve this requirement. Attached file shows where exactly i need the enhancement.
    Thanks and Regards,
    Mohammed Farooq

    There is no event of which I am aware.  Please also read How to use FQEVENTS to undersatnd how to search for events on your own.

  • How 'Assignment' is updated using VL02N transaction ?

    Hi Experts,
    I want to know how and where in the program SAPMV50A, the 'assignment' field is updated when  I post a GI document using VL02N transaction.
    The filed for assignment is ZUONR of BSEG table. I want to know how the ZUONR field is updated while VL02N transaction is used to post a GI document.
    Please help me asap.
    Thanks & regards
    Sanglap Ghosh
    Edited by: sanglap_ghosh581 on Mar 10, 2010 10:18 AM
    Edited by: sanglap_ghosh581 on Mar 10, 2010 10:20 AM

    Did you find a solution for this? I have the same requirement.

  • Adding Custom fields in ECC Business partner BP - (BUT000) using BDT or EEW

    Hello BDT / EWWB Gurus,
    We have a requirement to add custom fields to ECC Business partner, which interns create custom fields in But000 table.
    I would be great if anyone could let us know how to add Custom fields using BDT or EEWB.
    Please also elaborate the step by step process.
    thanks.
    Regards,
    Preethi.

    Hi Clemens,
    Thanks for the reply.
    I had read the document and it has given lot of information.
    Actuall my requirement is to add custom fields in But000 table and the data will be controlled through BRFPlus application in TRM. Lot of forum thread suggesting to use EEWB to enhance the Business partner but000 table.
    I would be great if you could let us know which methodalogy should I use to enhance the But000 table and what are all the impacts and also please let us know the process steps to enhance the but000.
    Thanks.
    Regards,
    Preethi.

  • Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

    Hi Friends,
    I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
    Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
    For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
    But i want how to add custom tab in which item details were to be attached.
    i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
    And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
    can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
    Thanks a lot in advance.
    Thanks
    Ravi.
    can any one give the solution regarding to the above one.
    Edited by: ravikanth on Jul 23, 2008 8:13 AM

    Hello Priyanka,
    I have the same problem by using Service Ticket in SAP CRM 5.0.
    Did you already solved this issue? If so, can you please provide the solution!?
    How can I activate and check the transfer log?
    Thanks and regards
    Alex

  • Custom field in Contract Account ( CAA3 ) using BDT

    Hi,
    I need help on BDT Configuration.
    I have been trying to add custom fields in the Contract Account, under Payment/Taxes Tab using BDT.
    I have followed all the basic steps required for the configuration but still the fields donu2019t seem to appear.
    I did refer to BDT Developers Manual from SAP.
    Can anyone help?
    Thanks & Regards,
    Rahul.

    By Using CAWM area menu t-code you can do the screen enhancements.
    After adding fields to field group
    Create a view and add this to field group, Create  a screen and add ur fields and write code to update those fields in database..
    Add your view to the corresponding section.
    After this you have to call BUSP t-code , Application object as FICA and activate all screens.
    Let me know if you need any more help..
    Regards,
    Shiva Kumar

  • Function module for updating amount in VL02N transaction

    Hi All,
         I have a requirement , to update Amount in Conditions tab of the header (VL02N transaction) beside parcel tracking .
    I have to update condition type 'ZF01' & the amount here ..
    I will get  file from a third party system to update the amount & tracking no..
    i have successfully updated tracking no.. by using FM XSI_TRACKING_DATA_SAVE.., unable to find FM for amount & condition type update..
    I have tried searching in FM 'WS_DELIVERY_UPDATE', didnt find anything related.
    If anyone has done any similar update in VL02N transaction, can you please suggest me appropriate FM?
    Regards
    Chaithanya

    fm SPELL_AMOUNT

  • Uploading texts in vl02n transaction

    Hi all,
    can anyone tell me how to upload texts(in vlo2n transaction->goto->header->texts)
    in vl02n transaction. plz send me some coding for this scenario.
    Thanks,
    Satish.

    This is Routing long text upload - CA22 Transaction example code :
    Report     : ZMPPC016
    Type       : Data upload
    Author     : Seshu Maramreddy
    Date       : 05/27/2005
    Transport  : DV3K920205
    Transaction: ??
    Description: This ABAP/4 Program Upload the long text into CA22
                 Transaction It accepts tab-delimited spreadsheet input
                 and it will run Call Transaction
    report ZMPPC016
           no standard page heading
           line-size 120.
    Constants
    constants : c_r type c value 'R', " PLNTY Value
                C_X TYPE C VALUE 'X', " Value for dynbegin.
                c_tcode like tstc-tcode value 'CA22', " Transaction code
                c_mode(1) type c value 'A', " BDC Mode
                c_tdformat type tline-tdformat value '*',"Tag column
                c_tdid type thead-tdid value 'PLPO', " Text ID
                c_tdform type thead-tdform value 'SYSTEM'." Form name
    Variables
    data : v_date like sy-datum, " date
           v_date1(4) type c,
           v_date2(2) type c,
           v_date3(2) type c,
           TNAME LIKE THEAD-TDNAME,
           v_mandt(3) type c,
           v_matnr(18) type c,
           flag type c.
    Internal table for file
    data : begin of t_file occurs 0,
           matnr(18) type c, " Material Number
           werks(4) type c,  " Plant
           vornr(4) type c,  " Operation Number
           tseq(3) type n,   " Line number in the long text
           text1(70) type c, " Long text
           plnal(2) type n,  " Group counter
           end of t_file.
    data : begin of t_text occurs 0,
           matnr(18) type c, " Material Number
           werks(4) type c,  " Plant
           plnal(2) type n,  " Group counter
           vornr(4) type c,  " Operation Number
           tseq(3) type n,   " Line number in the long text
           text1(70) type c, " Long text
           end of t_text.
    Internal table for MAPl
    data : begin of t_mapl occurs 0,
           plnnr like mapl-plnnr,
           end of t_mapl.
      Internal Table for PLAS and PLPO Table
    data : begin of t_plpo occurs 0,
           mandt like plpo-mandt,
           plnty like plpo-plnty,
           plnnr like plpo-plnnr,
           plnkn like plpo-plnkn,
           zaehl like plpo-zaehl,
           end of t_plpo.
    data t_long like tline occurs 0 with header line.
    Work area for t_text Internal table
    data : wa_text like t_text.
    data:  t_header like thead.         " long text
    Internal table for BDCDATA Structure
    data : begin of itab_bdc_tab occurs 0.
            include structure bdcdata.
    data : end of itab_bdc_tab.
    Selection-screen
    selection-screen : begin of block blk with frame .
    parameter : P_file like rlgrap-filename obligatory.
    selection-screen : end of block blk.
    initialization.
      p_file = 'C:\My Documents\InputFile.txt'.
    at selection-screen on value-request for p_file.
    F4 value for file
      perform file_get.
    start-of-selection.
    Get file data into Internal Table.
      perform get_data.
      sort t_text by matnr werks  vornr  plnal tseq.
    Save the long text into CA22 Transaction
      perform load_data.
    top-of-page.
      CALL FUNCTION 'Z_HEADER'
    EXPORTING
       FLEX_TEXT1       =
       FLEX_TEXT2       =
       FLEX_TEXT3       =
      skip 1.
    *&      Form  file_get
          F4 Value for file
    FORM file_get.
      CALL FUNCTION 'WS_FILENAME_GET'
           EXPORTING
                DEF_PATH         = 'C:\Temp\'
                MASK             = ',.,..'
                MODE             = 'O'
                TITLE            = 'Select File'(007)
           IMPORTING
                FILENAME         = P_file
           EXCEPTIONS
                INV_WINSYS       = 1
                NO_BATCH         = 2
                SELECTION_CANCEL = 3
                SELECTION_ERROR  = 4
                OTHERS           = 5.
    ENDFORM.                    " file_get
    *&      Form  get_data
          Get file data into Internal Table.
    FORM get_data.
      CALL FUNCTION 'WS_UPLOAD'
           EXPORTING
                FILENAME                = p_file
                FILETYPE                = 'DAT'
           TABLES
                DATA_TAB                = t_file
           EXCEPTIONS
                CONVERSION_ERROR        = 1
                FILE_OPEN_ERROR         = 2
                FILE_READ_ERROR         = 3
                INVALID_TYPE            = 4
                NO_BATCH                = 5
                UNKNOWN_ERROR           = 6
                INVALID_TABLE_WIDTH     = 7
                GUI_REFUSE_FILETRANSFER = 8
                CUSTOMER_ERROR          = 9
                OTHERS                  = 10.
      if sy-subrc eq 0.
        sort t_file by matnr werks plnal vornr tseq.
        delete t_file where matnr = ''.
        loop at t_file.
       Get the material number from tables ZMSMI_FERR_RAW,
       ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
          perform get_matnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
               EXPORTING
                    INPUT  = t_file-vornr
               IMPORTING
                    OUTPUT = t_file-vornr.
          move : t_file-matnr to t_text-matnr,
                 t_file-werks to t_text-werks,
                 t_file-vornr to t_text-vornr,
                 t_file-tseq  to t_text-tseq,
                 t_file-text1 to t_text-text1,
                 t_file-plnal to t_text-plnal.
          append t_text.
          clear t_text.
        endloop.
      else.
        WRITE: / 'Error reading input file'.
        stop.
      endif.
    ENDFORM.                    " get_data
    *&      Form  call_bdc
          BDC Script for CA22 Transaction
    FORM call_bdc.
    Screen 1010
      perform bdc_screen using  'SAPLCPDI'     '1010'.
      perform bdc_field  using  'BDC_OKCODE'   '=VOUE'.
      perform bdc_field  using  'RC27M-MATNR'   SPACE.
      perform bdc_field  using  'RC27M-WERKS'   SPACE.
      perform bdc_field  using  'RC271-VBELN'   SPACE.
      perform bdc_field  using  'RC271-POSNR'   SPACE.
      perform bdc_field  using  'RC271-PLNNR'   T_PLPO-PLNNR.
      perform bdc_field  using  'RC271-AENNR'   SPACE.
      clear :  v_date,
               v_date1,
               v_date2,
               v_date3.
      v_date1 = sy-datum+0(4).
      v_date2 = sy-datum+4(2).
      v_date3 = sy-datum+6(2).
      concatenate v_date2 v_date3 v_date1 into v_date.
      perform bdc_field  using  'RC271-STTAG'  v_date .
      perform bdc_field  using  'RC271-REVLV'   SPACE.
      perform bdc_field  using  'RC271-WERKS'   SPACE.
      perform bdc_field  using  'RC271-PLNAL'   WA_TEXT-PLNAL.
      perform bdc_field  using  'RC271-STATU'   SPACE.
      perform bdc_field  using  'RC271-VAGRP'   SPACE.
      perform bdc_field  using  'RC271-PROFIDNETZ'   SPACE.
    Screen 5400
      perform bdc_screen using  'SAPLCPDI'     '5400'.
      perform bdc_field  using  'BDC_OKCODE'   '=OSEA'.
    Screen 1010
      perform bdc_screen using  'SAPLCP02'     '1010'.
      perform bdc_field  using  'BDC_OKCODE'   '=ENT1'.
      perform bdc_field  using  'RC27H-VORNR'  WA_TEXT-VORNR.
    Screen 5400
      perform bdc_screen using  'SAPLCPDI'     '5400'.
      perform bdc_field  using  'BDC_OKCODE'   '=LTXT'.
      perform bdc_field  using  'RC27X-FLG_SEL(01)'  C_X.
    Screen 1100
      perform bdc_screen using  'SAPLSTXX'     '1100'.
      perform bdc_field  using  'BDC_OKCODE'   '=XEIN'.
    Screen 0999
      perform bdc_screen using  'SAPLWB_CUSTOMIZING'     '0999'.
      perform bdc_field  using  'BDC_OKCODE'   '=CONT'.
      PERFORM BDC_FIELD  USING  'RSEUMOD-GRA_EDITOR' SPACE.
    Screen 1100
      perform bdc_screen using  'SAPLSTXX'     '1100'.
      perform bdc_field  using  'BDC_CURSOR'   'RSTXT-TXPARGRAPH'.
      perform bdc_field  using  'BDC_OKCODE'   '=TXBA'.
      perform bdc_field  using  'RSTXT-TXPARGRAPH(03)'   '*'.
      perform bdc_field  using  'RSTXT-TXLINE(03)'
    Screen 5400
      perform bdc_screen using  'SAPLCPDI'     '5400'.
      perform bdc_field  using  'BDC_OKCODE'   '=BU'.
      call transaction c_tcode
           using itab_bdc_tab mode 'N'
           update 'S'.
      refresh itab_bdc_tab.
      if sy-subrc eq 0 and sy-msgty ne 'E'.
        v_mandt = t_plpo-mandt.
        CONCATENATE v_mandt
                    t_plpo-plnty
                    t_plpo-plnnr
                    t_plpo-plnkn
                    t_plpo-zaehl into tname.
        commit work.
        CALL FUNCTION 'DELETE_TEXT'
          EXPORTING
          CLIENT                  = SY-MANDT
            ID                    = c_tdid
            LANGUAGE              = 'E'
            NAME                  =  TNAME
            OBJECT                = 'ROUTING'
            SAVEMODE_DIRECT       = 'X'
         TEXTMEMORY_ONLY       = ' '
         LOCAL_CAT             = ' '
         EXCEPTIONS
           NOT_FOUND             = 1
           OTHERS                = 2
        if sy-subrc ne 0.
          write:/3  wa_text-matnr,24 wa_text-werks,
                    30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
                    60 ' -',
                    67 'Error Deleting Existing Long Text'.
        endif.
      else.
        write:/3  wa_text-matnr,24 wa_text-werks,
                       30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
                       60 ' -',
                       67 'Error Executing BDC'.
      endif.
    ENDFORM.                    " call_bdc
    *&      Form  bdc_screen
          BDC Script for Screen fields
         -->P_PROG   Program name
         -->P_SCRN   Screen Number
    FORM bdc_screen USING    p_prog
                             p_scrn.
      clear itab_bdc_tab.
      itab_bdc_tab-program = p_prog.
      itab_bdc_tab-dynpro = p_scrn.
      itab_bdc_tab-dynbegin = c_x.
      append itab_bdc_tab.
    ENDFORM.                    " bdc_screen
    *&      Form  bdc_field
          BDC Script for Screen fileds
         -->P_NAM   Field name
         -->P_VAL   Field value
    FORM bdc_field USING    p_nam
                            p_val.
      clear itab_bdc_tab.
      itab_bdc_tab-fnam = p_nam.
      itab_bdc_tab-fval = p_val.
      append itab_bdc_tab.
    ENDFORM.                    " bdc_screen
    *&      Form  load_data
          Save the long text into CA22 Transaction
    FORM load_data.
      loop at t_text.
        move t_text to wa_text.
        at new vornr.
    Read the data in MAPL Table
          select single plnnr from mapl into t_mapl-plnnr
                                 where matnr  = wa_text-matnr
                                 and   werks  = wa_text-werks
                                 and   plnty  = c_r
                                 and   loekz  = space.
          if sy-subrc eq 0.
    Read the data from PLAS and PLPO Table
            select SINGLE  a~mandt
                    a~plnty
                    a~plnnr
                    a~plnkn
                    a~zaehl into  t_plpo
                   from plpo as a inner join plas as b on aplnty = bplnty
                                                      and aplnnr = bplnnr
                                                      and aplnkn = bplnkn
                    where b~plnty = c_r
                    and   b~plnnr = t_mapl-plnnr
                    and   b~plnal = wa_text-plnal
                    and   b~loekz = space
                    and   a~vornr = wa_text-vornr
                    and   a~loekz = space.
            if sy-subrc eq 0.
              perform call_bdc.
            else.
            flag = 'X'.
              write:/3  wa_text-matnr,24 wa_text-werks,
                     30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
                     60 ' -',
                     67 'Matching routing group\Operation not found'.
              continue.
            endif.
          else.
            flag = 'X'.
            write:/3 wa_text-matnr,24 wa_text-werks,
                     40 ' -',
                     45 'Material Does not Exists or Material',
                     82 'not Available in MAPL Table'.
            continue.
          endif.
        endat.
        if flag ne 'X'.
          t_long-tdline = wa_text-text1.
          t_long-tdformat = c_tdformat.
          append t_long.
        endif.
        at end of vornr.
          if flag ne 'X'.
            v_mandt = t_plpo-mandt.
            CONCATENATE v_mandt
                      t_plpo-plnty
                      t_plpo-plnnr
                      t_plpo-plnkn
                      t_plpo-zaehl into tname.
            T_HEADer-TDOBJECT = 'ROUTING'.
            t_HEADer-TDNAME   = tname.
            T_HEADer-TDID     = c_tdid.
            t_header-tdform   = c_tdform.
            T_HEADer-TDSPRAS  = 'E'.
    Save the text
            CALL FUNCTION 'SAVE_TEXT'
              EXPORTING
                CLIENT                = SY-MANDT
                HEADER                = t_header
                SAVEMODE_DIRECT       = 'X'
         OWNER_SPECIFIED       = ' '
         LOCAL_CAT             = ' '
       IMPORTING
         FUNCTION              =
         NEWHEADER             =
              TABLES
                LINES                 = t_long
             EXCEPTIONS
               ID                    = 1
               LANGUAGE              = 2
               NAME                  = 3
               OBJECT                = 4
               OTHERS                = 5
            if sy-subrc eq 0.
              CALL FUNCTION 'COMMIT_TEXT'
                   EXPORTING
                        OBJECT   = t_header-TDOBJECT
                        NAME     = t_header-TDNAME
                        ID       = t_header-TDID
                        LANGUAGE = t_header-TDSPRAS.
              write:/3   wa_text-matnr,24 wa_text-werks,
                         30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
                         60 ' -',
                         67 'Long Text Loaded Successfully'.
            else.
              write:/3   wa_text-matnr,24 wa_text-werks,
                         30 t_mapl-plnnr,44 wa_text-plnal,48 wa_text-vornr,
                         60 ' -',
                         67 'Error Uploading Long Text'.
            endif.
            refresh t_long.
            else.
            write:/3 wa_text-matnr, 24 wa_text-werks,
                   45 'Long text not uploaded'.
            clear flag.
           endif.
          endat.
        endloop.
      ENDFORM.                    " load_data
    *&      Form  get_matnr
          Get the material number from tables ZMSMI_FERR_RAW,
    FORM get_matnr.
      clear v_matnr.
      case t_file-werks.
        when '0101'.
          select single cmatnr from zmsmi_simp_raw
                 into v_matnr  where matnr = t_file-matnr.
         if sy-subrc eq 0.
          if not v_matnr is initial.
            clear t_file-matnr.
            t_file-matnr = v_matnr.
          endif.
        when '0103'.
          select single cmatnr from zmsmi_ferr_raw
                 into v_matnr  where matnr = t_file-matnr.
         if sy-subrc eq 0.
          if not v_matnr is initial.
            clear t_file-matnr.
            t_file-matnr = v_matnr.
          endif.
        when '0102' or '0110' or '0111' or '0112' or '0113'
             or '0114' or '0115' or '0116' or '0117'.
          select single cmatnr from zmsmi_snap_raw
                 into v_matnr  where matnr = t_file-matnr.
         if sy-subrc eq 0.
          if not v_matnr is initial.
            clear t_file-matnr.
            t_file-matnr = v_matnr.
          endif.
      endcase.
    ENDFORM.                    " get_matnr
    Reward points if it is useful
    Thanks
    Seshu

  • Add new tab for sales transaction

    Hi,
    I want to add a new tab in sales transaction for bank detail, the data of this tab should be get from BP master data, and save to crmd_order transaction table.
    what method should I implement?
    thanks
    Gang

    Hi Gang,
    Use EEWB to enhance the order. The fields shall be added to CRMD_CUSTOMER_H table.
    <a href="http://help.sap.com/saphelp_crm50/helpdata/en/43/04bede807721ece10000000a155369/frameset.htm">EEWB</a>
    for populating these fields based on BP master data, use BADI COM_PARTNER_BADI method COM_PARTNER_MERGE.
    This BADI gets called when you enter partners (sold-to-party). In the mentioned badi method, read bank details from BP master and set this to your Z-fiedlss using FM CRM_CUSTOMER_H_MAINTAIN_OW.
    Hope this helps.
    Regards
    Kaushal

  • Enhancement of Business Partner (Relationships) using BDT -Bus Data Toolset

    Dear Experts,
    I have a requirement from my customer enhancing the Business Partner Relationships using BDT.
    I should add 2 fields namely salary, employer start date in the Business partner Relationships, it must be added in the characteristics of relationships as one employee can have multiple employers and vice versa.
    If I would like to add the fields in Business Relationships using BDT, are the steps same as adding fields in business partner? or do we need to perform any other steps? Did someone already did this type of modification, please provide your suggestions.
    After adding the fields is it possible to cusomize the fields for history of the changes? e.g. if salary field has been newly added and after creating a BP after some days I want to change the salary and for the changed salary I want to have a history.
    I would appreciate if you can help me with your suggestions.
    Many thanks and best regards,
    Afroz

    Solved the problem Using EEWB.

  • Data is not saving using BDT

    Hi All,
    I have enhanced BP screen using BDT  .
    I have created fields in already exisitng role and tab and the data is not getting saved in ztable .
    there is one tcode called BUS7 where I need to give FM for dsave  and few other events. I have defined all the events and Executed but unfortunately none of the events are getting called.  I have put a break-point no use no event is getting called,
    Kindly let me know any one got the same kind of issue.
    Thanks & Regards
    Sas

    Hello ,
    y dont you use existing BADI  to capture these details into Z table .im  not sure y its not triggering your events,but using BADI you can  save data into Ztable .
    i have done same thing , if user didnt goto my customer Tab..then my Customer Events and FM to capture data , so i have coded in both BADI and FMs .
    useful Tcodes : BUPT
    regards
    Prabhu

Maybe you are looking for