Adding text to a database
hello
i hope someone can help?
i have to read a text file and then send it to a database i know how to select from a database but do not know how to add my file to a database could anyone suggest any good ideas please
i will be most grateful
thanks ben
Try "insert into" or "update"
Similar Messages
-
Hi,
My question is in 2 parts really:
1) Once the photos are uploaded into iphoto, is there anyway of adding text to the photo? Say a title, or details of something about the picture that I wouldn't want to forget? If so, how can I do this?
2)My camera has the ability to add text to pictures. If I did this, when I came to uploading them into iphoto, would the text come with the pictures, and if so, where would it be displayed?
3)When exporting the photographs, to share with others or print, would I be able to disable the text, so it doesn't show on the photograph?
Thanks very much.in iPhoto there are several ways to add information about a photo - a title - a decscription - keywords - putting it in an album = these are all metadata and local to your computer - you can choose to include or not include them when you export a photo
if you want to actually put text on a photo then you must use a thir party program (Preview can do this - Annotate) or external editor - one you add text to a photo it is there and the old information behind the text is gone
as to what you camera does - read the camera manual - if it puts text in the EXIF ro IPTC fields and if iPhoto reads thos fields then that information will be part of the iPhoto database - it it puts text directly on a photo then it is part of the photo
LN -
Help needed in reading text file to database table
Hello experts,
i have to insert the values from the column of this text file and insert them in my database table.
I have done a few file to table insertions but i'm having some trouble with this one.
Any suggestions plz
thanks
liab_report 1.00 Page: 1
CDC:00537 / Mon Jun-21-2010 LIABILITY REPORT Mon Jun-21-2010 22:06:26
DRAW 1; SET 1; November 7, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 701040.00 0.00 660146.00 0.00 40894.00 0.00 0.00
Div3 1444128.00 0.00 1330056.00 0.00 114072.00 0.00 0.00
Div4 4711900.00 0.00 3889700.00 0.00 822200.00 0.00 0.00
6857068.00 0.00 5879902.00 0.00 977166.00 0.00 0.00
DRAW 2; SET 1; November 14, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 817817.00 0.00 817817.00 0.00 0.00 0.00 0.00
Div3 1687405.00 0.00 1611742.00 0.00 75663.00 0.00 0.00
Div4 3402100.00 0.00 3034200.00 0.00 367900.00 0.00 0.00
5907322.00 0.00 5463759.00 0.00 443563.00 0.00 0.00
DRAW 3; SET 1; November 21, 2009
TOTAL PAID ON TOTAL EXPIRED ON TOTAL FRAC OUTSTANDING
WINNERS 06/21/10 PAID 06/21/10 EXPIRED ROUND
DIVISION AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT
Div1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Div2 779933.00 0.00 769804.00 0.00 10129.00 0.00 0.00
Div3 1605548.00 0.00 1525104.00 0.00 80444.00 0.00 0.00
Div4 4891700.00 0.00 4256800.00 0.00 634000.00 0.00 900.00
7277181.00 0.00 6551708.00 0.00 724573.00 0.00 900.00Plz clarify whether u want to load text file as a file into database or value of this text file into database. If values are to be loaded from this text file, U can better format the text file and use SQL loader to load the file into database. By formatting the database, i mean remove the unnecessary headings and characters, kee only the values to be loaded idelimited by ' '(space) or ','(comma). Create a control file and load it into the target table.
-
We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
iled unexpectedly.\r
: error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
dentials in the SSO database are more recent.\r
error MSB4018: \r
error MSB4018: at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
ring applicationName, String identifier, IPropertyBag properties)\r
error MSB4
018: at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
me, String propName, String propValue)\r
error MSB4018: at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
()\r
error MSB4018: at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
askExecutionHost.Execute()\r
error MSB4018: at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
sult)
Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010Hi,
This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
2. If this does not works, have a look at this
link
Hope this will help.
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question -
I recently bought Photoshop CC (2 Days Ago) and shortly after installing I jumped onto Photoshop CC and started to set up the prefferences for my personal use and started to just do some basic stuff and see whats new in CC. when inserting Guides & adding Text the workspace started to flash/stay BLACK. I don't know whats going on but my specs are better than the minimum requirements? Any idea whats going on? Operating System : Windows 8.1
Have a look through this step by step guide.
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
It's coming up 1am here, so I am calling it a night. -
I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only sends the original form without text. Once I've changed a doc in Adobe, how can I save it so that I'm able to use it with added text and notes? Also, I'm using a new iPad.
If you are using those apps or websites, they are likely viewing the PDF using iOS' built in PDF previewing, which will not show annotations and markup to the PDF. We have informed Apple of this issue, but do not have any insight into whether or when they will fix it.
Regarding the qustion about importing pictures, Adobe Reader does not provide any capabilities to import pictures into a PDF. To do this, you'll need to use Acrobat, available on your desktop computer. -
How can I remove the underline from added text for tracing edits
We have a lot of content that includes underscores and when we use the track text edit feature added text is green and underlined. How can I change the properties of the added text to not be underlined?
Starting with FM11, you could specify a custom colour to be used for track changes, but the styles (underline, strikethrough) are still hardwired.
Even if you try to make the changes to the rack text edit conditions in a MIF file, they will get overwritten as the MIF is interpreted when opened by FM.
Please use the new Bugs & Features form to submit an enhancement request: https://bugbase.adobe.com/index.cfm -
Reading Text file or Database efficiently
Hi.
I have an option to read EMP names randomly from either text file or database . Can anyone tell me which one will be fast. I have to read more than 5000 names dynamically for my application and pick one name randomly.
Many thanks, RaviHi quitte ,
Thanks for replying. I just want to pick names randomly from file or database to name each and every customer in my application dynamically.
For this, I created one table with Unique names and would like to design a code such that each customers will be named dynamically.
Any Suggestions or Advise?
Ravi -
How to extract data from text file to database table
Hi ,
I am trying to upload data in text file to database table using GUI_UPLOAD function .what would be the program for that.
thanks in advance.Hi,
I don't think you have a standard sap program to upload data from file to database table...
Instead you can create a custom program like this..
DATA: T_FILEDATA(1000) OCCURS 0 WITH HEADER LINE.
DATA: T_ZTABLE LIKE ZTABLE OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\TEST.TXT'
tables
data_tab = T_FILEDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FILEDATA.
T_ZTABLE = T_FILEDATA.
APPEND T_ZTABLE.
ENDLOOP.
MODIFY ZTABLE FROM TABLE T_ZTABLE.
COMMIT WORK..
Thanks,
Naren -
Adding Text to a photo...Need help
I'm new to Adobe Photoshop Elements 7. I'm following the instructions for adding text to a photo, but I can't see what I'm typing. I can see the cursur, but nothing else. I can see the text in the Layer, but not on the photo. Please help.
Check the font size in the options bar. If it's really small you won't see it.
Look in your layer's palette and insure your text is in a layer located above the photo in the stack.
You might also check your image's resolution in the Image Size dialog. I've seen a couple of posts where someone changes the resolution to 1 with resample turned off...then can't see the text because it's too small even when they have large numbers inserted in the font size box. -
Acrobat crashes whenever adding text
This occurs whether there is a text box to be filled in or using the add text function. There may be other things also crashing it but this is the biggest issue for me on my Mac host system. If I open the same documents in a Windows VM using Reader, I can enter text without difficulty.
Mac 10.8.4
Acrobat XI Version 11.0.03
Here's some of the error message displayed:
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
terminate called throwing an exception
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x929d3a6a __pthread_kill + 10
1 libsystem_c.dylib 0x96905b2f pthread_kill + 101
2 libsystem_c.dylib 0x9693c4ec abort + 168
3 libc++abi.dylib 0x94e1a7e0 abort_message + 151
4 libc++abi.dylib 0x94e18249 default_terminate() + 34
5 libc++abi.dylib 0x94e18289 safe_handler_caller(void (*)()) + 13
6 libc++abi.dylib 0x94e182f1 std::terminate() + 23
7 libc++abi.dylib 0x94e193e6 __cxa_throw + 110
8 com.adobe.linguistic.LinguisticManager 0x14054a46 0x1404e000 + 27206
9 com.adobe.linguistic.LinguisticManager 0x1405dabb devtech::LM_FileSpec::LM_FileSpec(FSRef const&) + 43
10 com.adobe.AcrobatPlugin.Spelling 0x1340b733 0x133d0000 + 243507
11 com.adobe.AcrobatPlugin.Spelling 0x1340b05e 0x133d0000 + 241758
12 com.adobe.AcrobatPlugin.Spelling 0x1340affb 0x133d0000 + 241659
13 com.adobe.AcrobatPlugin.Spelling 0x13400acb 0x133d0000 + 199371
14 com.adobe.Acrobat.framework 0x00286b29 0xda000 + 1755945
15 com.adobe.Acrobat.framework 0x0028666a 0xda000 + 1754730
16 com.apple.CoreFoundation 0x9743c406 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 22
17 com.apple.CoreFoundation 0x9743bda5 __CFRunLoopDoTimer + 709
18 com.apple.CoreFoundation 0x97420bb2 __CFRunLoopRun + 1842
19 com.apple.CoreFoundation 0x9742001a CFRunLoopRunSpecific + 378
20 com.apple.CoreFoundation 0x9741fe8b CFRunLoopRunInMode + 123
21 com.apple.HIToolbox 0x9017ff5a RunCurrentEventLoopInMode + 242
22 com.apple.HIToolbox 0x9017fbf5 ReceiveNextEventCommon + 162
23 com.apple.HIToolbox 0x9017fb44 BlockUntilNextEventMatchingListInMode + 88
24 com.apple.AppKit 0x9070f93a _DPSNextEvent + 724
25 com.apple.AppKit 0x9070f16c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
26 com.apple.AppKit 0x907055cc -[NSApplication run] + 855
27 com.adobe.Acrobat.framework 0x000e38b0 0xda000 + 39088
28 com.adobe.Acrobat.framework 0x000e1ff3 RunAcrobat + 307
29 com.adobe.Acrobat.Pro 0x000d3ed5 main + 91
30 com.adobe.Acrobat.Pro 0x000d3e71 start + 53I'm having a similar issue. Every third or fourth time I save after adding text Acrobat crashes with no meaningful reason (at least none in the crash message)...even though the added text is saved. I'm working through trying different text settings to see if there is a problem there. I'll post what I find.
-
Unable to print added text only in Acrobat Pro XI
User is trying to print added text that's been added to an existing PDF page. In Acrobat X she chose "Form fields only" under Comments & Forms from the Print menu. In XI it produces a blank page. The added text only shows up if she chooses Document or Document and Markups, but then she gets the entire document. She only wants the added text to print.
Thanks to all who commented here. I found that adding text using Tools>Content Editing>Add Text will not allow the user to print solely the added text. As everyone responded here, that's as designed. However, using Comment>Annotations>Add Text does allow the user to print solely the added text as she was used to doing in Acrobat X. I thought it was the same tool under two different headings, but obviously they interact differently in the print menu. Choosing Form fields only from the Print Menu's Comments & Forms panel will produce solely the text added under the Comment panel's Add Text tool without printing the rest of the document page. And the user doesn't have to turn the document into a form to do so.
-
Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?
I use the Tools > Annotate > Add Text feature, and when I click away after adding text, it automatically changes the text box size such that the last letter -- or last word -- gets bumped off into an invisible line below it, forcing me to manually adjust every single text box. It is highly annoying when trying to complete PDF forms (e.g. job applications).
It appears to be a glitch, quite honestly, an error resulting from Apple's product design. Has it been fixed in the new operating system (for which they want $30)?
I would very much appreciate any help you can provide! Thank you for your time.* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Why does added text disappear when I move the cursor
After adding text to an unprotected .pdf file the text disappears when I move the cursor and want to add a second box of text. The text in the first box reappears when I double click on the space where the box was. How do I set the text so that it remains visible and printable?
Hi,
I think the data in the PDF file was filled-in using MAC preview.
One option is to ask the user to fill the file again using Adobe Reader or Acrobat.
Or else refer to following link:
http://acrobatusers.com/actions-exchange/pdf2fdf_auto-save
Regards,
Anoop -
Adding text to a photo in iphoto
How do you add text to a smart album photo? Also, when syncing to my iphone, I want the text to appear. I am building a tropical plant field guide.
iPhoto has no capability of adding text onto an image. For that you'll need a 3rd party image editor setup as the external editor in iPhoto.
Some Image Editors that support layers:
Photoshop Elements 11 for Mac - $79
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
Portraits and Prints - Free
GIMP for Mac - Free
OT
Maybe you are looking for
-
[SOLVED] Logitech Marble Mouse: can't enable custom mapping
I followed the wiki page: Logitech_Marble_Mouse My mouse works, but I can't get custom mappings to work. Here's my /etc/X11/xorg.conf.d/10-evdev.conf, to me it looks like it does ignore the Marble settings. What am I missing? Section "InputClass" Ide
-
I have a 2010 MacBook and I need to wipe the hard drive and restore to factory settings. The problem is that even though I have the original disc, the CD drive has stopped functioning and will reject any disc put into it. Therefore, is there another
-
I I tried to sync all the songs in the library of the music folder, when I did my usual sync , I got a message saying Some of the items in the Itunes libery. Including "彩虹的微笑". Were not copied to the Iphone. "User's Iphone" because they could not be
-
Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7.
HI ALL, i need documents on Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7. Thanks in advance.
-
Trigger creation - Help Required
Hi, New to pl/sql and would like some help in trying to achieve the following. I have 2 tables with one being a history table. When someone insert into the first table not the history table. I'd like to create a trigger that will retrieve the last en