Adding the Philippines to a map

When I try to add the Philippines to a map in iPhoto, it only highlights one island. I'm entering other countries in the map, and it doesn't seem to have a problem with e.g. Vietnam or Cambodia (when I enter those it highlights the entire country).
Any tips on how to deal with this would be appreciated.

Hi Luc,
As per my understanding, I think this issue can be caused by the size of shapefile is too big. We can try to add another shapefile with small size as a layer to the map report to check the issue again. If it is actually caused by file size, I suggest
that we can try to use some tools to simplify and reduce the size. For more details, we can refer to the following link:
http://www.statsilk.com/maps/useful-free-gis-shapefile-map-tools
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Adding the line items in mapping

Hi Experts,
I got the structure like this.
Item    (0 to unbounded)
    amount   (1 to 1).
I am getting more than one amounts, I need to add all the amounts and map it to target field "sum".
For this how can i do the mapping can anybody please help me.
Kind Regards,
Kumar

hi
                 for Amount field ---(set the context to message type node)
            then Map directly amount field to sum (statistic functions)
            then connect the sum function to target field....
hope this helpful....
Message was edited by:
        sasitharan

After adding seperate performance collections to MAP 9.1 database, the database has become corrupted

Hi,
I have installed MAP 9.1(9.1.265.0) on my notebook, with Windows 7 Enterprise. The inventory of our environment was successfull and I have successfully added some performance collections to the database.
First I ran the performance collection for one hour, then added a performance collection of one week. this was okay.
Then I waited one week and added another collection of about five days. That collection would not stop: It was scheduled to run between 2014-07-28 12:49:31 until 2014-08-01 05:00:04. But it was still running at 2014-08-01 05:30:25. I waited for a little
bit longer, but the collection kept on running according to the status screen.
So I cancelled out of the collection at 2014-08-01 05:45. In the performance data it said that the colection ran from Jul 14 2014 08:04 AM until Aug 1 2014 4:57AM. So that looked okay.
But now, when I try to Get the performance metrics data from MAP, it states that I have to do a "Refressh Assessment", because I problably have cancelled out of a collection. This "Refresh Assessment" wil run for about an hour and than
completes with a message "Failed"
I get these errors in the MapToolkit.log
<2014-08-05 05:14:51.09
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[ClearPerfdata]] : 125 ms
<2014-08-05 05:14:56.13
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateTimeIntervals]] : 5039 ms
<2014-08-05 05:22:47.76
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateMetricsPerTimeInterval]] : 471591 ms
<2014-08-05 05:52:54.66
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught InvalidOperationException trying to roll back the transaction: This SqlTransaction has completed; it is no longer usable.
<2014-08-05 05:52:54.79
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:15.86
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:20.99
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 05:53:45.00
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 06:24:03.69
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 06:54:13.91
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 07:24:28.99 AssessInventoryWorker@Analyzer,E> RunAssessments() - Assessment threw an exception:
<2014-08-05 07:24:29.03
AssessInventoryWorker@AssessInventoryWorker,I> AssessmentCompletedEventHandler: Assessment completed event.
<2014-08-05 07:24:29.09
AssessInventoryWorker@TaskProcessor,I> WorkerCompleted: Worker: 'AssessInventoryWorker'
<2014-08-05 07:24:29.15 TID-16@TaskProcessor,I> Run: Completed. Status: Failed
Is there maybe a restriction to the intervalls of adding performance collection data, or is there something else I am doing wrong?
(I made a backup of the database after the first week of performance data, that database is still usable, so I can try to add more performance collections to that version of the database)
I hope someone has an idea what is going on.
Thanks!

Time between isn't the problem. If you look in the log file, SQL is timing out. I think the problem is machine resources and time related. After the performance data collection has run for the predefined amount of time, MAP has SQL execute various assessments
on the data to aggregate the raw data into something MAP can use. The more raw data that exists, the longer SQL will take and the more CPU and memory resources SQL will need.
I would recommend that you have at least 4 cores or vCPU's and 6-8 GB of memory dedicated to the machine on which MAP is running. I would also follow the directions in this Wiki article to increase the timeout in MAP so that MAP will give SQL the time it
needs to complete the job.
http://social.technet.microsoft.com/wiki/contents/articles/10397.map-toolkit-increasing-the-sql-database-timeout-value.aspx
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

No google maps in the philippine store. Is philippines the only one?

I understand when you upgrade your iphone to IOS 6, google maps will be gone from your phone. I also understand that said app was rereleased last december 2012. Thinking this was a worldwide event, I checked the app store and it was not available. I surfed around learning that it's available in the US, HK, Singapore and many more countries. I was wondering if the philippines is the only store without google maps?

Doubtful

When is Google Maps going to be available in the Philippine?

google maps is still not available here in the philippines!

Whenever Google decides to release it there. You could try asking them if they have a date. However, most companies don't give out that information ahead of time.

ADOBE CONVERTER NOT AVAILABLE IN THE PHILIPPINES

I would like to purchase adobe converters, that is from pdf files to words and excel, but it is not available in the Philippines. Can I request for a permission to purchase said software?

Hi Rodrigo.reapor,
Thank you for your interest in Adobe ExportPDF however this service is not available in Philippines at this moment(See Article Below). We are working in direction to provide this facility across the globe and Philippines would be added soon into the list however there is no estimated time.
http://forums.adobe.com/docs/DOC-2596
Let me know if you have any other question.
Regards,
~Pranav

[svn:osmf:] 13042: Fix for FM-287, reinstating the main sample ( that uses serial and parallel composition), and making another pass at getting all the changed trait methods mapped correctly back- and forth between JS and Flash .

Revision: 13042
Revision: 13042
Author:   [email protected]
Date:     2009-12-17 03:45:27 -0800 (Thu, 17 Dec 2009)
Log Message:
Fix for FM-287, reinstating the main sample (that uses serial and parallel composition), and making another pass at getting all the changed trait methods mapped correctly back- and forth between JS and Flash.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-287
Modified Paths:
    osmf/trunk/apps/samples/framework/HTMLGatewaySample/HTMLGatewaySample.as
    osmf/trunk/apps/samples/framework/HTMLGatewaySample/html-template/index.template.html
    osmf/trunk/framework/MediaFramework/org/osmf/external/HTMLElement.as
    osmf/trunk/framework/MediaFramework/org/osmf/gateways/HTMLGateway.as

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

Is Location services available in the Philippines?

Hi guys... ive been trying to use my Map app in my iPod touch 4th gen but it keeps saying "Cannot Determine Location" but all the Location Services are turned on and my wifi signal is excellent. Is there a restriction of this service in the Philippines that's why I can't use it? Thanks.

Location services use the router location of the connected or nearby routers. The router and its location has to be in Apple's database of routers and their location. As of yet nobody here knows how to add or correct Apple's database.

How can i used the "face time" is facetime is available here in the philippines?

how can i used the "facetime",is facetime is available here in the philippines?

Googling shows that FT is avaialbe in the Phillippines. FT s prohibited in some middle eastern countries and iDevices officially purchased in thos countries eill not have FT and it can't be added back even if the iDevice is moved to a country that allows FT.

I have added the Documents folder to the Dock, however when I save a document it doesn't appear in the Documents folder on the Dock, only the Documents folder in the Finder. Is this a quirk, so am I doing something wrong?

I like having my Documents folder on the Dock so I added the Documents folder from the Finder to the Dock. When I save a document to the Documents folder, the saved document appears in the Documents folder from the Finder and not in the Documents folder on the Dock. Why is this happening? And how can I change this?

newbieAK wrote:
I opened the Finder, selected Documents, then right clicked and selected Add to Dock.
Oooh. I never new that was there.

HELP! I want to know whether my hand-me-down iPhone 4 is SIM/carrier-locked or not. I was given an iPhone 4 which I think was purchased outside the Philippines.

I was given an iPhone 4 which I believed was purchased outside the Philippines. The previous owner had it jailbroken but something went wrong so it was stuck on DFU mode. So when it was given to me, I had it restored and updated via iTunes to iOS 5.1. I bought a micro-sim and inserted it on the sim tray. iTunes was able to detect the SIM card number and there was NO MESSAGE like the sim card is not supported whatsoever which can be usually seen in unsupported simcard. I thought everything went smoothly. But when I tried to set-up the phone, the SLIDE TO UNLOCK button is unresponsive. It doesn't work so I was stuck there and my iPhone cannot be accessed because of that. What shall I do? I have tried doing the hard reset several times, it still didn't work. I have tried restoring my iPhone three times but the slide to unlock is still unresponsive. I think the iPhone was able to detect my carrier simcard since it shows on the top corner the name of my carrier, mobile signal and 3g network. Now I am wondering as to why the slide to unlock button is unresponsive? Was it because of my iPhone LCD or was it because the iPhone is locked? Please help.

according to some blogs, if the sim card you are using is unsupported, iTunes will show you a message that the sim card you are using is unsupported. But when i opened itunes, I didn't see that message. Instead, it was able to detect my sim card number. So I guess, the simcard is supported. It isn't the original sim, though. Then the phone was able to detect the mobile carrier, mobile and 3g signals. So iam wondering whether my phone is locked or was it a hardware problem?

Getting an error while adding the user in Sharepoint foundation 2010 environment.

Hi,
I am having full control access to SharePoint site. Then i tried add user for that site.
But i am getting following error while adding the user to the site.
An unexpected error has occurred.
Troubleshoot issues with microsoft SharePoint Foundation.
Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
Can you please help me anyone on this.
Thanks,
Ashok

This could be any one of a number of things. You need to lookup the Correlation ID in the ULS logs on the SharePoint server. That should provide the additional information necessary to diagnose and solve the problem. Here's a blog post
on how to find the error.
http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

I have 2 email addresses set up on my iphone 5, 1 can send mail and the other can't... have tried deleting and adding the account, no luck, have tried all suggestions... anyone help?

I have recently purchased the iphone 5S and have two AOL email accounts set up on it. They could both receive and send mail on the first day, but from the second day only 1 can send mail (both still receive). I get an message saying "Unable to send mail. A copy has been placed in your Outbox. Sending the message content to the server failed." This has been the response now for 3 days and suddenly this morning, I was able to send an email from this account, but only the one and now it's back to that same message. I have deleted and added the account again, using various methods. I even reset my phone and set it all up again from beginning with no luck. It is very frustrating and I am unsure why I can't send from both accounts, especially being that they are the same provider. I have read forums and it appears many have this same problem and I wondered if anyone has had it recently on this phone and how they fixed it. Someone said just use the AOL app to send from this account, yes that can be done, but it's inconvenient having to sign in all the time when i have a mail app that should work automatically. Any suggestions would be welcomed!!

I am not sure if this issue is going to help you but lets give it a try.
I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using.

Adding the Checkbox for each row in classic report

Hello,
I have created classic report with checkboxes in each row and added the On-Submit process, BUTTON CONDITIONAL, to determine the behavior of the checkboxes. The PL/SQL process is suppose to delete the selected row from database.
I am getting the Success message, but When I check the database, the row still persist in the database.
PLSQL CODE:
FOR i IN 1..apex_application.g_f01.count LOOP
DELETE
FROM
registry
WHERE
reg_id = apex_application.g_f01(i);END LOOP;
ORACLE APEX: 4.2
Thank you

Hi ApexNewLearner,
Try this
DECLARE
j number;
BEGIN
FOR i IN 1..apex_application.g_f01.count LOOP
j := apex_application.g_f01(i);
DELETE FROM registry
WHERE reg_id = apex_application.g_f01(j);
END LOOP;
END;
or better try to replicate your issue on apex.oracle.com , that is easy for users to investigate the issue and give you appropriate solution.
Hope this helps you,
Regards,
Jitendra

Problem showing the crystal report viewer in form after added the component on it

Greetings
I have a problem running a program. I created a form which I added the component Crystal Report Viewer perfecty but during program execution when I call that form my VS 2012 Ultimate show the following error:
Translated:
Failed to create the form. See Exception.InnerException for details. Error: An exception occurred in the type initializer for 'CrystalDecisions.Shared.SharedUtils'.
Note: If I remove the component from the form. the applications runs fine when calling the form without the component CrystalReportViewer
It is something related to my VS? o just that the actual version 13.0.9 is not yet compatible?

Report.Show?
How about you try:
CrystalReportViewer1.ReportSource = <path to your report>
Or:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
crReportDocument.Load(<path to your report>)
CrystalReportViewer1.ReportSource = crReportDocument
Or, if the report is added to the project:
crReportDocument = New test
CrystalReportViewer1.ReportSource = crReportDocument
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Message was edited by: Ludek Uher

Adding the Philippines to a map

Similar Messages

Maybe you are looking for