Adding the values fed in the table

Hi
i want to add the values of one column in the table that are given by the user. I set the "calculated" property of the corresponding context element in the controller as true and then writing the code for it. But when i run my application, then even if i give valid data in the corresponding column, it still shows the message errors i have set for the validations and clears the field.
is there any way in which this can be calculated without setting the "calculated" property as true?
If yes, then how to access the values of the column?
Thanks & regards,
Anupreet

Hi,
Without using the Calculated property you can proceed the following way suppose you have a Node A with attribute a,b,c.
then you can get each of these values using
wdContext.current<name of node>element().get<attribute>();
The above code gives the value for currently selected row.
Similarly you can get all attributes and perform the required operations.
To get values for particular row you can use
wdContext.node<name of node>().get<name of node>ElementAt(i).get<attribute name>();
Here i is the index of the particular row.
Hope this helps.
Revert back for further clarification.
Regards,
Leena

Similar Messages

How to retrieve the values from PL/SQL table types.

Hi Every one,
I have the following procedure:
DECLARE
TYPE t1 IS TABLE OF emp%ROWTYPE
INDEX BY BINARY_INTEGER;
t t1;
BEGIN
SELECT *
BULK COLLECT INTO t
FROM emp;
END;
This procedure works perfectly fine to store the rows of employee in a table type. I am not able to retrieve the values from Pl/SQL table and display it using dbms_output.put_line command.
Can anybody help me please!!!!!
Thanks
Ahmed.

You mean, you can't add this
for i in t.first..t.last loop
dbms_output.put_line(t(i).empno||' '||t(i).ename||' '||t(i).job);
end loop;or you can't add this
set serveroutput onor maybe, you are working in third party application where dbms_output is not applicable at all?
You see, not able like very similar it is not working - both are too vague...
Best regards
Maxim

Pre-populating a date/time column with the value entered in the last added item

I have a list with a column called "expected finish date". Whenever the user adds the very first item in a list, he/she should have to enter a value for this column.
I want to make all new item entries to pre-poplate this field with the value entered in the previously added item. This way, he/she wont have to re-enter the date every time (which rarely changes). How can this be done?

could create a second list ("state") with column ("default finish date")...
create a workflow on main list... if column is blank/empty, pull from second list... otherwise, update second list with the value that was entered.
Or, customize the form (InfoPath or JavaScript)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Needs Query to get the cycle time automatically based on the value provided in the UDF on OWOR table

Dear all,
Need a query to get the Cycle time in hr based on the value provide in the udf on OWOR table.
Details of UDF:-
1.Start date =10/07/14 (Field Name U_EA_REST)
2.Start time =10:00        (Field Name U_EA_REASTARTTIME)
3.End date =11/07/14    (Field Name U_EA_REET)
4.End Time=14:00          (Field Name U_EA_REAENDTIME
Cycle Time=_______      (Field Name U_EA_REACYCLETIME)
Regards,
BanugopanRajendran

Dear all,
Need a query to get the Cycle time in hr based on the value provide in the udf on OWOR table.
Details of UDF:-
1.Start date =10/07/14 (Field Name U_EA_REST)   - Date Type
2.Start time =10:00        (Field Name U_EA_REASTARTTIME) - Hour Type
3.End date =11/07/14    (Field Name U_EA_REET) - Date Type
4.End Time=14:00          (Field Name U_EA_REAENDTIME - Hour Type
Cycle Time=_______      (Field Name U_EA_REACYCLETIME) - Hour Type
Regards,
BanugopanRajendran

I need to add the values stored in the session object into the html textbox

Dear Sir,
i have been trying to create an edit employee details page
What i have done till now is as follow:
1. Got employee id from HTML page.
2. Compared it with the id stored in the database.
3. If the id is correct then pulled the record of the corresponding employee and stored it in the session object.
4. Dispatched the session values to another servlet EditEmpDetails2.java
what i need to do now
5. Now i need to set the session values in the text field of the html form
6. I also need to be able to edit those vales and store the edited values in the database.
Please help me as i have tried doing it for 1 week without any clues
i have tried to create a html page which is something like this:
<html>
<head>
<title>Edit Employee Details Page</title>
<body BGCOLOR="red" text="black">
<h1 ><font color="black">Edit Employee Details Page</font></h1>
<form action = "EditEmpDetails" method="Get">
<table width="50% align="center"
<tr><td>Employee ID: </td>
<td><INPUT TYPE="TEXT" name="employeeid"<br></td></tr>
<tr><td><center><input type="submit" value="submit"></center></td></tr>
<tr><td><center><input type="reset" value="reset" ></center></td></tr>
</table>
</form>
</body>
</html>
design of my servlet EditEmpDetails.java
public void EditEmpDetails1 extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException
PrintWriter out = response.getWriter();
response.setContentType("text/html");
HttpSession session = request.getSession();
String employeeid;
String X = request.getParameter("employeeid");
System.out.println("Employee iD:" + X);
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:murphy");
String query = "Select * from users where employeeid=?";
PreparedStatement stat = con.prepareStatement(query);
System.out.println(stat);
stat.setString(1,X);
ResultSet rs = stat.executeQuery();
while(rs.next())
String Z = rs.getString(password);
if(Z.equals(X))
String A = rs.getString(1);
session.setAttribute("employeeid", A);
String B = rs.getString(2);
session.setAttribute("firstname", B);
String C = rs.getString(3);
session.setAttribute("lastname", C);
String D = rs.getString(4);
session.setAttribute("gender", D);
String E = rs.getString(5);
session.setAttribute("dateofbirth", E);
String F = rs.getString(6);
session.setAttribute("address", F);
String G = rs.getString(7);
session.setAttribute("postalcode", G);
String H = rs.getString(8);
session.setAttribute("phone", H);
String I = rs.getString(9);
session.setAttribute("mobile", I);
String J = rs.getString(10);
String url = "/EditEmpDetao;s.java";
RequestDispatcher dispatcher = getServletContext().getRequestDispatcher(url)
dispatcher.forward(request,response);
catch (Exception e)
system.out.println(e)
I do not know how to put the values stored in the session object into the html text box

3. If the id is correct then pulled the record of the corresponding employee and stored it in the session object.do you really need to store this in session object?
5. Now i need to set the session values in the text field of the html form which form? in a new html/jsp page? i suggest go for a JSP
In your JSP page use JSP expression tags to put the session attributes.
it's something like : <input type='text' name='employeeid' value='<%= session.getAttribute("employeeid") %>' >and you need to generateanother servlet for saving the details/modifications to the database.
I think i m clear enough.
if you need more clarifications. just try it and then post your problem.
Diablo

How to capture the value selected in the drop down box

Hi all,
I am populating values in drop down box by using FM vrm_set_values in module pool.
like below
01 ABC
02 ACB
03 BCA
04 CAB
in module pool drop down box element name is RQGM-VALUE.
Problem is what ever the value is select in the drop down box from above element RQGM-VALUE is not filling any value.
i need to capture the value selected in the drop down box and pass it to another variable.

Hi,
Refer this standard code. Your issue will be resolve.
REPORT demo_dynpro_dropdown_listbox.
TYPE-POOLS vrm.
DATA: name TYPE vrm_id,
      list TYPE vrm_values,
      value LIKE LINE OF list.
DATA: wa_spfli TYPE spfli,
      ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
TABLES demof4help.
name = 'DEMOF4HELP-CONNID'.
CALL SCREEN 100.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE init_listbox OUTPUT.
CLEAR demof4help-connid.
SELECT connid cityfrom cityto deptime
    FROM spfli
    INTO CORRESPONDING FIELDS OF wa_spfli
   WHERE carrid = demof4help-carrier2.
    value-key = wa_spfli-connid.
    WRITE wa_spfli-deptime TO value-text USING EDIT MASK '__:__:__'.
    CONCATENATE value-text
                wa_spfli-cityfrom
                wa_spfli-cityto
                INTO value-text SEPARATED BY space.
    APPEND value TO list.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            id     = name
            values = list.
ENDMODULE.
MODULE user_command_100.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'CARRIER' AND NOT demof4help-carrier2 IS INITIAL.
    LEAVE TO SCREEN 200.
ELSE.
    SET SCREEN 100.
ENDIF.
ENDMODULE.
MODULE user_command_200.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'SELECTED'.
    MESSAGE i888(sabapdocu) WITH text-001 demof4help-carrier2
                                        demof4help-connid.
ENDIF.
ENDMODULE.

How to monitor the values transferred to the jump query in a debug mode?

Dear experts,
There is a problem in the interface of two qeuries. In the first query, the infoobject is defined as a global filter with a constant. I added this infoobject in the interface via RSBBS.
Nevertheless, if i run the jump query, the value in this InfoObject is not taken into account by the jump query.
Does anybody know whether there is a method to debug (monitor) the values tranferred to the jump query? For example, in the transaction RSRT or others.
Thanks in advance!

in RSRT- EXECUTE+DEBUG => breakpoint in RRI transpormations
also see the note 1053310
Regards, Ragz

There are fewer columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.

I have been looking at my code for hours now and cant figure out what is wrong. The error has kept popping up even when i thought i had fixed everything. maybe a second set of eyes could help me out here. If you could help me out it would be much appreciated.
USE [ConorsSetKits]
GO
CREATE TABLE Customers (
CustomerID Int NOT NULL IDENTITY(1000,1),
LastName NChar(30) NOT NULL,
FirstName NChar(30) NOT NULL,
Address NChar(50) NOT NULL,
City NChar(30) NOT NULL,
State NChar(2) NOT NULL,
Zip Numeric(5) NOT NULL,
Email NVarChar(50) NOT NULL,
DateOfBirth Numeric (4) NOT NULL,
CONSTRAINT CustomersPK PRIMARY KEY(CustomerID),
CONSTRAINT ValidZip
CHECK ( [Zip] LIKE '[0-9][0-9][0-9][0-9][0-9]' ),
CONSTRAINT ValidState
CHECK( LEN([State]) = 2),
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
CREATE TABLE Sets (
SetID Int NOT NULL IDENTITY(1000,1) Primary Key,
SetName NChar(20) NOT NULL,
SetType NChar (20) NOT NULL,
Price Numeric (20) NOT NULL,
Quantity Numeric (50) NOT NULL,
CONSTRAINT SetTypeCheck
CHECK (SetType IN ('Planes','Tanks','Robots','Cars','Helicopters','Boats','Trains','Motorcycles','Jets')),
CONSTRAINT ValidQuantity
CHECK (Quantity >= 0)
CREATE TABLE Orders (
OrderID Int NOT NULL IDENTITY(1000,1),
CustomerID Int NOT NULL,
OrderDate Date NOT NULL,
CONSTRAINT CAIntPK PRIMARY KEY(OrderID, CustomerID),
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders OFF
SET IDENTITY_INSERT dbo.CUSTOMER ON
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1000, 'Janes', 'Jeffrey', '123 W. Elm St', 'Renton', 'WA', '98055',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1001, 'Smith', 'David', '813 Tumbleweed Lane', 'Loveland', 'CO', '81201',
'[email protected]',1992);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1015, 'Twilight', 'Tiffany', '88 1st Avenue', 'Langley', 'WA', '98260',
'[email protected]',1972);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1033, 'Smathers', 'Fred', '10899 88th Ave', 'Bainbridge Island', 'WA', '98110',
'[email protected]',1980);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1034, 'Frederickson', 'Mary Beth', '25 South Lafayette', 'Denver', 'CO', '80201',
'[email protected]',1970);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1036, 'Warning', 'Selma', '205 Burnaby', 'Vancouver', 'BC', '80201',
'[email protected]',1981);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1037, 'Wu', 'Susan', '105 Locust Ave', 'Atlanta', 'GA', '30322',
'404', '653-3465', '[email protected]',1971);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1040, 'Gray', 'Donald','55 Bodega Ave', 'Bodega Bay', 'CA', '94923',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1041, 'Johnson', 'Lynda', '117 C Street', 'Washington', 'DC', '20003',
'[email protected]',1969);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1051, 'Wilkens', 'Chris', '87 Highland Drive', 'Olympia', 'WA', '98508',
'[email protected]',1994);
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets ON
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1000, 'MysterySet1','Planes',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1001, 'MysterySet2','Planes',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1002, 'MysterySet4','Tanks',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1003, 'MysterySet3','Robots',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1004, 'MysterySet5','Cars',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1005, 'MysterySet6','Boats',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1006, 'MysterySet7','Trains',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1007, 'MysterySet8','Motorcycles',$9.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1008, 'MysterySet9','Helicopters',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1009, 'MysterySet10','Jets',$29.99,10);
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders ON
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2012-12-12');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1005, '2013-08-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-08-31');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2014-03-25');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1002, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2013-01-05');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1006, '2012-06-22');
SET IDENTITY_INSERT dbo.Orders OFF

Price Numeric (20) NOT NULL,
I do not think you understand this datatype? Go look at the values you are attempting to insert into this column. For example, "$29.99". After the insert, what value is actually stored in that column?
DateOfBirth Numeric (4) NOT NULL,
No. Just No. Either change the column name to faithfully represent what values you intend to store (and apply the appropriate constraints) or change the datatype and the values that you intend to store to match the column name. And the constraint
that you do have:
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
is both logically suspect and syntactically wrong. First, the upper boundary will be computed as 1999-04-29 15:50:21.670. But, of course, your column is a whole number of no more than 4 digits. The same issue applies to your lower boundary.
A simple select statement will show you those errors
select cast('1920-01-01' as numeric(4)), getdate() - 5844, cast(getdate() - 5844 as numeric(4));
An insert statement fails with the same error. Because, of course, your boundary values must actually be converted to numeric(4) in order to compare them against the value contained in the column. Generally, you can convert from
string to numeric - IF the content of the string actually contains a value that is numeric and can be converted into the specific type needed. Not so in this case. Is this 16 year period (5844 days) significant for some reason? You should
document it here in your DDL with a comment, because it is unlikely to be documented (and kept current) anywhere else.
And lastly, your script has:
SET IDENTITY_INSERT dbo.CUSTOMER OFF
That is not the name of your table, and therefore that statement also fails. The table name you used is plural.

Check the values while saving the values in SM30

Hi all,
I have created a Table maintennace for a ztable in SM30.
I want to check the values while saving the values in the SM30.
Can aynbody please give any idea how can i acieve this.
Thanks,
Tarangini

Hi Tarangini,
Go to the Table Maintenence Generator screen in Change mode. from this Screen go to the
Enviorment->Modifications->Events.
New screen will open and click on the New Entries button.
then from the F4 Help of the first column, select ur appropriate Event and in the second column give the name of the Subroutine.
and from the Third column u can do the coding for the subroutine as shown below.
FORM BEFORE_DATA_SAVE.
IF SY-UNAME EQ 'USER1' OR SY-UNAME EQ 'USER2'.
ELSE.
message 'No Authorization for Change...' type 'E'.
ENDIF.
ENDFORM.
Regards
Jagesh

Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
<input type="file" name="file" accept="image/*" id="file" />
mimeTypes.rdf does not seem to allow this.

''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
<pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
For details, see
* [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

The value returned from the load function is not of type numeric errors after migration to Coldfusion 11

I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?

This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">

<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>


<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>

<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>

<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
   this.sCountryName = "";
   this.sISOCode = "";
   this.sDHLCode = "";
   this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>


<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     if(isDefined("session.afr")){
      whichOne = "#session.afr.getsAFRNumber()#";
     } else {
      whichOne = "";
     iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
    </cfscript>
   <cfset this.iErrorID = iErrorID>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="get" datasource="#sDatasource#">
    SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: get: #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>

<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>

<cfif not checkID.recordCount>
   <cfreturn this.add()>
<cfelse>
   <cfreturn this.update()>
</cfif>
</cffunction>

<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>
<cftry>
   <cfquery name="add" datasource="#sDatasource#">
    SET nocount on
    INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
    VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
    SELECT @@identity as autoID
    SET nocount off
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: add: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>

<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
    AND idCountryID <> #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="update" datasource="#sDatasource#">
    UPDATE tblCountry
    SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
    sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
    sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: update: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>

<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="checkDependancies" datasource="#sDatasource#">
    SELECT idCountry
    FROM tblAddress
    WHERE idCountry = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("That Country is being used by an address, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="delete" datasource="#sDatasource#">
    DELETE FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent>

How can i get the value stored in the session object using its sessionid

how can i get the value stored in the session object using its sessionid by running stand alone java application

myforum wrote:
how can i get the value stored in the session object using its sessionid by running stand alone java applicationThis does not seem to make sense! You need at least to give a lot more detail of what you are doing.

How to compare the values stored in the list

Hi,
I am having the requirement that i want to compare the values stored in the list.How to store the values in the list and compare the list values stored inside it.
Regards,
Ahamad

http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List)
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List,%20java.util.Comparator)
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Comparator.html
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Comparable.html

Doubt in the value return by the function based on given condition

Hi,
Below function should return the value based on the value of in_row_number_high variable.
I have used CASE but it does't return proper value.
How could I give that condition?
Please help.
FUNCTION gen_total_lane_count_pct
    in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
    in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
    in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
    in_interval_end_date_time   edr_rpt_by_ranges_output.interval_end_date_time%TYPE,
    in_row_number               edr_rpt_by_ranges_output.range_low%TYPE,
    in_row_number_high          edr_rpt_by_ranges_output.range_high%TYPE,
    in_lane_min                    edr_lane_by_class_report_data.v_lane%TYPE,
    in_lane_max                    edr_lane_by_class_report_data.v_lane%TYPE
RETURN NUMBER
IS
     my_total             NUMBER(18);
     my_count_pct         NUMBER(18);
     my_total_pct         NUMBER(18);
     my_each_count_result NUMBER(18);
     my_count_result            NUMBER(18);
     my_total_count            NUMBER(18);
lane_start           edr_rpt_tmp_report_lanes.site_lane_id%TYPE;
lane_end             edr_rpt_tmp_report_lanes.site_lane_id%TYPE;
row_start            NUMBER(12);
row_end              NUMBER(12);
BEGIN
     my_count_pct       := 0 ;
       SELECT MIN(site_lane_id)
         INTO lane_start
      FROM edr_rpt_tmp_report_lanes
     WHERE edr_rpt_tmp_report_lanes.output_lane_id        = in_lane_id
       AND edr_rpt_tmp_report_lanes.output_direction_id   = in_direction_id;
     SELECT MAX(site_lane_id)
          INTO lane_end
       FROM edr_rpt_tmp_report_lanes
      WHERE edr_rpt_tmp_report_lanes.output_lane_id        = in_lane_id
        AND edr_rpt_tmp_report_lanes.output_direction_id   = in_direction_id;
     SELECT MIN(range_low)
       INTO row_start
       FROM edr_rpt_by_ranges_output;
     SELECT MAX(range_low)
       INTO row_end
       FROM edr_rpt_by_ranges_output;
           my_each_count_result := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    in_row_number,
                                    in_row_number_high,
                                    in_lane_min,
                                    in_lane_max
    my_count_result := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    row_start,
                                    row_end,
                                    in_lane_min,
                                    in_lane_max
     my_total_count := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    in_row_number,
                                    in_row_number_high,
                                    lane_start,
                                    lane_end
         IF (my_each_count_result > 0)   THEN
               my_total := edr_rpt_lane_by_class_package.gen_total_lane_count (
                                    in_lane_id,
                                    in_direction_id,
                                    in_interval_start_date_time,
                                    in_interval_end_date_time,
                                    row_start,
                                    row_end,
                                    lane_start,
                                    lane_end
            CASE
            WHEN in_row_number_high = row_end THEN
                 my_count_pct := ROUND((my_each_count_result / my_count_result ) * 100 );
            WHEN in_row_number_high < row_end THEN
                    my_count_pct := ROUND((my_each_count_result / my_total ) * 100 ) ;
            ELSE
     RAISE_APPLICATION_ERROR(-20101, 'The row number specified is not recognized.');
            END CASE;
         END IF;
         return my_count_pct;
END gen_total_lane_count_pct;          Edited by: Indhu Ram on Jan 5, 2010 11:43 AM

Hi,
I have to find out the % value for each column value( For rx if there is only 2 columns).To calculate the % , each column value should get divided by the total of that column value.
To calculate the % for the total row , each column total should get divide by the sum of column ( sum of column 1 + sum of column 2)values.
ROUND((my_each_count_result / my_count_result ) * 100 ) ---- This calculaton gives me the % for the total row.
ROUND((my_each_count_result / my_total ) * 100 ) ------- This calculation gives the % for the data row.
The condition that I have tried is, if it reaches end of data row (to achieve that condition I have given this condition in_row_number_high < row_end )
Now my result returns only values based on this condition -- in_row_number_high < row_end .
It does't look for the first condition.
CASE
WHEN in_row_number_high = row_end THEN
my_count_pct := ROUND((my_each_count_result / my_count_result ) * 100 );
WHEN in_row_number_high < row_end THEN
     my_count_pct := ROUND((my_each_count_result / my_total ) * 100 ) ;
ELSE
RAISE_APPLICATION_ERROR(-20101, 'The row number specified is not recognized.');
END CASE;
Hope , you have some good understanding now. Please help me how could I do this?

Adding the values fed in the table

Similar Messages

Maybe you are looking for