Adding time capsule to existing airport extreme base station

I have an AEBS (1st generation) connected to my internet modem at the WAN port (PPPoE) and a wireless network set up and running fine.
I've bought a Time Capsule (4th generation) to boost the signal of the wireless network at my bedroom and have a wireless backup.
But I can't seem to make it work!!!
Can someone point me out some precise steps I should follow or list of settings?
(Maybe I need to reset the TC so to erase the mistakes I made. If is that so, how can I do it?)
Thanks!
Edgar
PS: this is a Mac-only enviroment, running Snow Leopard.

Here you go ...
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

Similar Messages

Time capsule to extend airport extreme base station

I have an airport extreme base station dual band that I use to create a wireless network. I use a first generation time capsule single band to extend the wireless network. In the area of my home where the time capsule is my ipad and macbook the signal strength of the wifi is great and works great however my iphone 4 works horribly on wifi in the same room where the time capsule is located. Why is this? And is there a better configuration that would work better?

The AirPorts are all designed to try to extend the 5 GHz signal because that is the fastest connection. But, because 5 GHz signals are not as strong as 2.4 GHz signals, it's usually the 2.4 GHz network actually that winds up being extended because it's the stronger signal of the two bands and the extending device is usually located at some distance from the main router.
If your Time Capsule is extending the 5 GHz band, that's impressive. The AirPort Express would also probably extend the 5 GHz band if you placed it in the same area. Unfortunately, the iPhone cannot connect to that signal and must get it's connection from the main router. If you set things up so that the Time Capsule extends 2.4 GHz, then the iPad and your Mac will be running at significantly lower speeds.
It can be done by assigning a different name to the 5 GHz network and I can give you the steps. Is that what you want to do?
If you reversed the Time Capsule and AirPort Extreme, you'll have to set the Time Capsule up at 2.4 GHz and the AirPort Extreme will only extend 2.4 GHz. It cannot extend both 2.4 GHz and 5 GHz since it won't "see" that signal from the Time Capsule. No reason to do this really.

How to add NAS to existing Airport Extreme Base Station Network...

Hi! I have a Airport Express network (DSL provided via a DSL modem) that is connected to the PC via ethernet, iMac 333 via Wireless adapter, and Powerbook via wireless card. I am bursting at the seams with components!!
I have the printer set up via the AE.
I would like to add a NAS to the works. (Just to see if it can frustrate me even more! )
How exactly would I hook this up? Any suggestions? Has anyone done this? Have a favorite NAS device you can recommend? We are looking to install this for a centralized place to store all our music, photos, movies, etc. We have TONS of digital media to store and it is clogging up our respective hard drives!
Thanks in advance for the help!!
Minder
Ti Powerbook 15 inch Mac OS X (10.4.6) iMac Grape 333MHz, Custom built PC and a Flower Power iMac soon coming home with me too...
Ti Powerbook 15 inch Mac OS X (10.4.6) iMac Grape 333MHz also

It is unclear... Do you have an AirPort Extreme base station (AEBS) or AirPort Express (AX)?
If you have an AEBS then you should have this configuration:
DSL modem<->[WAN] AEBS [LAN]<->PC
If that is your current setup, you would need to modify it by adding an Ethernet switch (or hub) so that it looks like this:
DSL modem<->[WAN] AEBS [LAN]<->switch<-+->PC
.......................................|->NAS

Time Capsule with existing Airport Extreme--Help

I just bought a new 20 inch iMac with a Time Capsule for home. I have an existing Airport Extreme and there are a number of peripherals (2 iBooks, Playstation 3) which feed off of this airport. What I want to do is make the Time Capsule accessible only to my new iMac and keep the other network intact. I disconnected my DSL from my Extreme and connected it to the Time Capsule. It works fine. My thought was then to run an ethernet line from the back of the TC to the Extreme. I did this, got a green reception signal on the ethernet from the TC, but am unable to make the Extreme work as it did before. I know I'm doing something wrong--possibly the config on the Extreme--but I'm clueless as to making this work. Any help would be appreciated.
Thanks

Do exactly what you describe but place the secondary router in bridge mode then configure its wireless.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

TIme Capsule 2TB and Airport Express Base Station

Hi,
just received a new mac book pro, time capsule and airport express. I already had a older imac (Early 2008).
my goal is to connect everything in a wifi at the highest possible speed. The airport express servers also as a itunes connection to my stereo.
I followed basic instruction, all is working except that I can't have the speed a 5GHz (I verify the speed by holding the alt key and clicking on the wireless icon in the menubar) I have n but at 2.4GHz.
what are the correct settings for this. I noticed that if I do not have the possibility to set radio modus to n 5GHz only. the version of airport configuration program that came with the time capsule is 5.5 and the time capsule is on 7.5 the airport express on 7.4.2.
thanks for helping on this.
Message was edited by: dannykite
Message was edited by: dannykite

This looks like you held down the "option" key while you clicked on the Airport icon at the top of your screen.
You were asking about different Radio Modes for the Time Capsule
Open AirPort Utility - Click Manual Setup
Click the Wireless tab located just below the row of icons
Now you will see the wireless settings.
Hold down the option key when you click on the Radio Mode selection box to see more choices.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

Airport Extreme Base Station as an wireless Extender to new Airport time capsule

After many months of time machine back up problems. (verify back up failing) I am considering biting the bullet and getting a new 2TB Airport extreme time capsule. Can I use the old (late 2013 801.11ac) airport extreme to extend wifi network?
A few other questions.
1.Does extending reduce wifi performance?
2. If using extreme as extender can I still plug in hard drive or hard drive to it?
3.
currently using imac 21.5 (late 2013) 1TB backing up to 6TB WD mybook live duo (connected to Extreme using ethernet), via airport extreme base station (ac wireless band to mac)
Any guidance appreciated.

Is it possible to quantify how much faster USB back up is compared to 802.11ac between mac and AirPort time capsule?
600GB should take 10 hours by ethernet. And it will be somewhat faster by USB3.. exactly how fast is difficult to predict as the first TM backup itself is slow due to many small files. In terms of raw speed maybe twice but it will depend on the disk used. USB you can use an SSD and get super huge speed. (not that I think you will be buying a 1TB SSD anytime soon).
In terms of raw speed it is cheese and chalk. The max speed of real world file transfer on AC wireless is around 430Mbps and that is using ideal world.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c?see=MAX
This has nothing to do with link speed.. this is how fast a file actually transfers. And that is assuming the iMac and the TC are in the same room. And everything is perfect with nothing else using connection.
The real world speed of USB3 is around 100MB/s to a spinning hard disk..
http://www.macworld.com/article/2039427/how-fast-is-usb-3-0-really-.html
which may indicate the limit is the actual disk speed. In bits per second you x 8.. so the USB3 is 800Mbps. The advantage of USB direct connection is that speed is available at all time. Not when your close or the load on wireless is low.
Further to your comments when extending. Is it only the area covered by extending that has reduced performance or all the wifi signal?
The speed will depend on hops..
So if the computer is using resources on a local router.. and only one wireless hop then it is fast.
If it is using resources via a second router so wireless goes.. computer--- router2----router1-- resource.
Your speed drops 50% at best.. at worst it is really bad.
For example.. computer 1 on router 1 accesses computer 2 hard disk on router2 with everything wireless.
Count the hops. C1-R1, R1-R2, R2-C2
That gives 3 hops. So each packet is transmitted.. along that chain.. each transmission can only begin after it is received in full. Now add some other computers using resources.. say C3 is using internet via R1.. that has to be time sliced. So you get 50% of 50% of 50% of 50%. It is obvious that wireless networks have a huge handicap.. they cannot transmit and receive at the same time.. nor can they talk to more than one client at a time.. so add time slicing to wireless hopping.
Now ethernet is entirely different. It can transmit and receive at the same time.. ie is duplex. And in a switch it can talk to several computers at the same time. That is why we say.. as much as you can ethernet.. and use wireless as the last single hop to a client that needs it.. ie iphone or ipad.. or laptop if you cannot plug in ethernet.
Can the ac wifi format be extended using AirPort Extreme and time capsule.
Over very short range yes. AC wireless is only on 5ghz and is poor penetration of solids.. so this will work but maybe only to the next room.

Older airport extreme base station as a network extender with new time capsule

I just bought a new time capsule (802.11ac). Can my older airport extreme base station (model A1143) be used as a network extender with it?

Yes, although it maybe disappointing..
There are two kinds of extending.. wireless repeater type which is poorest as it has to transfer all packets in two steps instead of one.. hence will halve the speed.
Or using ethernet to the old extreme and set it in bridge.. You can then setup roaming network... this is much better.. but getting ethernet to the right place could be messy or expensive or both.
http://support.apple.com/kb/HT4260
wireless extend doco.. mind all of this is out of date.. the basics are correct.. the methods via the airport utility may be obsolete.
http://support.apple.com/kb/HT4145
Documentation has rather lagged lately.

Time Capsule vs. Airport Extreme & external HDD

Hullo all. For time capsule backups, i am either going to purchase a 1tb time capsule unit or an external usb drive to use with an airport extreme base station's usb port. Wondering if someone more knowledgeable than i knows if either choice offers a transfer speed advantage over the other.
Also, if i go with the external usb drive option then i'd like to employ a usb hub so that when necessary i can also run my printer off of the same airport's usb port. Would anybody know if this would work okay, without compromising backup speed and quality?
Thanks!

artdlr007 wrote:
Of course - that is the essence of my question: what's faster, time capsule or an AEBS and fast usb external drive. And is the speed difference significant.
One big problem not being addressed by that choice is that Time Capsule itself is slow. Even if you connect a computer over Gigabit Ethernet directly to a Time Capsule with its internal interface hard drive, you will not get throughput anywhere close to Gigabit Ethernet speeds.
From the Macworld review of Time Capsule:
Depending on the size and number of files being backed up, throughput ranged from 45 to 60 Mbps over gigabit Ethernet. This would put an initial 100GB backup at 4 to 6 hours.
That's right. Real transfer times are lower than 100Mbps Ethernet, on a par with 802.11g wireless, and well below USB 2.0.
The speeds in the review and in my experience mean that with Time Capsule, neither USB nor the hard drive is the real bottleneck because both have higher throughput than Time Capsule's networking chipset. I don't know if the AEBS would be faster.

Airport Extreme Base Station as Extender to Airport Extreme Time Machine

I have tried this a few times, but to no avail: Tonight I purchased an Airport Extreme Base Station (AE) to set up as an extender to my Airport Extreme Time Capsule (AETC). The Airport Utility finds the router and goes through set-up seemingly fine, with green lights on both. Then shortly after (within a minute) the AE reboots on it's own, followed by the AETC rebooting (again, on it's own) and this occurs repeatedly. I reset the AE completely and run through the set-up and the same thing occurs. I've also done soft resets to the AETC. Long and short of it - the restarting discontinues once I unplug the power cord from the AE. Then the AETC resumes as it has - providing fine wifi and speed. It appears the AE rebooting on its own makes the AETC reboot. Any ideas? Thanks!

howto - extending airport 802.11n networks
Pre-Requistites
1) Ensure all have most recent firmware - 7.7.3 for AC devices, 7.6.4 for 802.11n devices
2) Have most recent Airport Utility (OS X 10.7 thru 10.9, use 6.3.2, IOS6/7 use 1.3.3)
3) Only have the Primary Airport/TimeCapsule powered on for now
Set up the Primary/Anchor Airport Base Station
1) Do this over ethernet - ensure that the Modem and TimeCapsule/Airport is connected on the WAN port
2) You'll be prompted by Airport Utility to name the Network and the Base Station
Network is the SSID of the Wireless LAN
BaseStation is the name of the Airport/TimeCapsule
3) You'll be prompted for a password - this will be for both the WLAN and the Base Station on initial setup
Note here - there are at least three passwords to worry about post setup
a) BaseStation Management - in this how-to, this will be carried thru to the extended basestations
b) WLAN Access
c) Disk Access for TimeCapsule and AirDisk
They can be same or unique, up to you...
Configure the Airport/TimeCapsule for WiFi/Network
4) Select the named BS in Airport Utility - click the 'edit' button
5) Review 'Base Station' Tab
5a) BaseStation Name
5b) BaseStation Password - you can change this now if desired, this does not affect WLAN password
6) Review Internet Tab
6a) set as appropriate for your network - e.g DHCP or other depending on needs
6aa) focus here is getting the primary BS set up first
6b) Click Internet Options - this is IPV6 setup - for now...
6ba) Set to Link-Local Only, click save, you can go back and change this later if needed
7) Go to Wireless Tab
7a) Set Network Mode to "Create a wireless network"
7b) Check Wireless Network Name
7c) Wireless Security - recommend WPA2 Personal - this is important as you'll need this later
7d) Wireless Password - the password entered in step 5b above is what is used here, feel free to modify or not - if so, note this
7e) disregard Enable Guest Network for now
7f) Click Wireless Options
7g) ensure 5Ghz network name is unselected
7h) Country as appropriate - since I'm in California, I choose United States
7i) Leave 2.4Ghz and 5Ghz Channels as "Automatic" for now, click save if needed
8) Click Network Tab
8a) if this is your primary router - use DHCP and NAT
8b) Click Network Options
8c) DHCP Lease - I use 12 hours
8d) IPv4 DHCP Range - every here is a bit different, but my recommendation for most folks
192.168.1.100 to 150
Use what works for you, keeping in mind that the AP Extreme, TimeCapsule, and 2012 Airport Express can handle 50 clients, max
8e) Ensure that Enable NAT Port Mapping Protocol is selected
8f) can worry about Enable default host at: [] later, this is the DMZ'ed host
8g) can choose to enable IGMP Snooping or not - doesn't affect the primary setup
8h) click save
TimeCapsule Only - for Airport Extreme, worry about AirDisk later
This is TimeMachine support, along with FileShares
9) Select Disks - you should see a partitiion named "Data"
9a) ensure that Enable file sharing is selected
9b) ensure that Share disks over WAN is unchecked for now
9c) Secure Shared Disks:
Choices here -
device password - noted in step 5b above
disk password - this will be for all LAN clients that can see the Data Partitiion
accounts - you can set up separate users and passwords - this is beyond scope of this how-to
Recommendation if using as TimeMachine only, use a disk password - note this as you'll need it for timemachine on the clients
Save Settings to the Airport/TimeCapsule
10) Click the "update' button
The Airport/TimeCapsule will restart
Everything now should show green and shiny - open a web browser and attempt to go to Apple/Google/Yahoo, to ensure that you've got network connectivity
Reviewing things in the Airport 6.3 utility, you should see your base station and the Internet - both with green status
Once done here, let's extend the Wireless Network
Note - again, it helps to be connected to the primary base station on ethernet, wireless makes things, erm, challenging
11) with another decive - Mac/iPad/iPhone/iPod Touch or PC, ensure that Wireless LAN is working on the primary AP/Basestation
Once this is done, then proceed to the next step
Enable the "Extended" Airport - can be another TimeCapsule, Airport Express or Airport Extreme
For purposes of this discussion - assume all ore 802.11n capable at a minimum, so this applies towards more recent gear
a) Airport Extreme AC (2013)
b) Airport TimeCapsule AC (2013)
c) Airport Express 2012 Dual-Band (Looks like AppleTV)
d) Airport Extreme 802.11n 5th Gen, TimeCapsule 4th Gen
e) Airport Express 802.11n - similar to the 802.11g variant, looks like a MacBook Pro power adapter
Assumptions here is that the extended airport is factory defaults - see link below for more info:
http://support.apple.com/kb/HT3728
Once this is done, plug in the Airport that is intended for extending the wireless network
after about a minute or so, you should see a blinking orange light, this is normal...
In Airport Utility, you should see in the upper left hand, "Other Wi-Fi Devices (1)" - click this, if you don't see this, exit and restart Airport Utility
12) clicking on the button, you should see an entry menu as "Airport Extreme xxxxxx", select this
13) Once selected, you'll see "This Airport Extreme/Express/TimeCapsule will be set up to extend "Primary Base Station"
14) Enter the name for this base station - it should be unique from the name of the Primary noted in step 5a
15) Click "next"
16) Should see "setting up this base station to wirelessly extend..."
you'll see some progress messages.. this is the two basestations handshaking....
If successful, you'll see the BaseStation named in step 14 as "is now wireless extending "base station named in (step 5a)"
STOP - the Airport is now extended, repeat steps 11 thru 16 for each addtional Airport
For advanced features - such as port forwarding, DMZ, IPv6 Tunnels, Back to my Mac, etc - perform this only on the Primary Base station outlined in steps 1 thru 8h
Good Luck!

Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
Thanks

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

Airport Extreme Base Station N adjusts time, then drops WDS

I have a WDS network with a +Time Capsule+ (TC = WDS Main) and an +Airport Extreme Base Station with 802.11n+ (AEBSn = WDS Remote). Everything works great - except when it doesn't. The AEBSn will suddenly drop the connection, and instead of a normal IP address (10.0.1.11) it will get a self-assigned one (e.g. 169.254.130.58). I have pawed through a number of log files, and I see that at the point that things go south, I get a whacky net-time update; for example:
Jul 31 20:25:21 Severity:5 Internet Configuration leased -- host <10.0.1.11/255.255.255.0> gateway <10.0.1.1> dns <10.0.1.1> wins lease <14400> domain <dclient.lsne.ch>
Jul 31 19:54:15 Severity:5 Clock synchronized to network time server time.euro.apple.com (adjusted -3606 seconds).
Jul 31 20:55:35 Severity:3 No Address for NTP server time.euro.apple.com.
Note the 1-hour backwards time adjustment; after that, the AEBSn has dropped the connection. Note that there was no user traffic on the network at the time - no one was home.
Sometimes the status light on the AEBSn will go yellow, sometimes it stays green - I haven't been able to detect a pattern to that. The TC is zen: he's green no matter what happens. I thought he was supposed to be a caring master?
I thought this was perhaps related to interference from other wireless networks - I live in the city and there are a bunch around me - so I moved to the least-used primary frequency band: no change.
Help!!! This is driving me bananas. Thanks in advance.

Bob,
Thanks for the response, and sorry for taking so long to get back. I think I found how to fix the problem of the dropped WDS connections, and I wanted to give it a while to make sure the problem was really fixed.
The drops got to be more and more frequent, until finally the WDS connection would drop pretty much immediately. At that point, the TC (the master in my setup) for the first time started showing signs of being unhappy: the status light would briefly flash orange at irregular intervals (I could see nothing relevant in the log file, though). I had always assumed the problem was at the AEBS end, and had always restarted him, but this time I tried restarting the TC - and bingo presto, everything started working, and has been working for over a month now, without ever restarting the AEBS.
I would guess that there's something in the WDS implementation (at least on the TC) that gradually degrades over the period of many months - memory leak or fragmentation or similar.
Thanks for the suggestion about the "extend a wireless network" option. When I read the manual, I got the impression that was just an automated way of setting up WDS; I didn't realize that it affects the band used. I now realize that the title of the section, "Extending the Range *of an 802.11n Network*," is not totally anodyne. Anyway, I just now set it up as you suggested, and so far, so good.
Thanks again,
-- Philip

What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

Use an Airport Express. Configure the AEBS to allow it's wireless network to be extended. This is a dropdown menu option under the Wireless tab. Configure the Airport Express to Extend an Existing Network also under it's Wireless tab. You will need to provide the name of your network used in the AEBS as well as the network's access password.

Adding time capsule to existing airport extreme base station

Similar Messages

Maybe you are looking for