Adding time char to infocube

Hi,
What precautions i need to take to replace a time char with another time chat into a infocube and infocube is in production.
Thanks in advance
krish
Edited by: kris202729 on Dec 19, 2011 3:45 PM

It's depend upon which Time Char. you are adding.
1) I assume that 0CALDAY already in the flow and you are including 0CALMONTH which is mapped to 0CALDAY then there is no impact on production data.
2) If 0CALMONTH already in the flow and you are including 0CALDAY then new data of 0CALDAY will come on date when you are included 0CALDAY production data.
Regards,
Sushant

Similar Messages

How to add new time char of IC to multiprovider

Hi Experts,
Could any pne help in how to include the newly added time char in two infocubes out of 5 infocubes of multiprovider
Thanks In Advance
Nitya

Hi Nitya,
Right click on Multiprovider--changedrag and drop time char in to dimensionnext click on Identify characteristic--here you need to select the info providers from which you to get data for time char. ie you need to selet the required two cubes out of five.
Regards
Surendra
Edited by: vaade surendra on Mar 27, 2010 5:20 AM

Time Char-remodelling an Infocube

Hi,
My Requirment is to include a New Time Chars (0CALMONTH2) into the Exisisting Cube with Historical Data by performing Remodelling.
Can we include a Time Char by Remodelling and fill the Data
Thanks

did you activate the cube after adding the new time chars? After activation, the new chars would append to the transformations at the bottom( last) of source fields

Adding a Time Char in a cube

Hi All,
What will be the best and the fastest way to add a time char in a standard cube... i need to add 0 calweek, 0calmonth, 0calquarter and 0fiscal year in the standard cube... I am not worry about the data i just need the fastest way to add theses time char in my cube.... Your help is appreciated
Thank you
SAP BI

Hi,
You can use either of the below methods.
Double click on the cube>Go to edit mode>Add the info objects in the time dimension.
OR
Use Remodelling to add these info objects.
-Vikram

Append two files with added time stamp

Hi experts,'
MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp.
How to achive this as with append we do not get option of adding time stamp.
Other thing is I want all the appended files should be there in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they shoud be appended as a separate file in Receiver Folder.
How to achive this??
Regards,
Nidhi

Hi Nidhi,
>>MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp
Use BPM and pick the two files
>>Other thing is I want all the appended files should be there in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they should be appended as a separate file in Receiver Folder.
Use variable substitution and create the directory and filename dynamically...
Use Dynamic configuration module in receiver adapter and do as specified in this blog:
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot
Regards
Suraj

Types of time char

hi,
           how many types of time char do we have and which are they??

here we go with 13 time charecterstics
Tech Name      Description                                   type          i/plength    o/p length
0CALDAY     Calender Day                                    DATS     8     10
0CALYEAR     Calender Year                             NUMC     4     4
0CALMONTH     Calendar Year/Month                    NUMC     6     7
0CALQUARTER     Calendar Year/Quarter           NUMC     5     5
0CALWEEK     Calendar Year/Week                    NUMC     6     7
0CALMONTH2     Calender Month                            NUMC     2     2
0FISCYEAR     Fiscal Year                                    NUMC     4     4
0FISCPER     Fiscal year / period                                    NUMC     7     8
0FISCVARNT     Fiscal year variant                            CHAR     2     2
0HALFYEAR1     Half Year                                       NUMC     1     1
0FISCPER3     Posting Period                                    NUMC     3     3
0CALQUART1     Quarter                                            NUMC     1     1
0WEEKDAY1     Weekday                                      NUMC     1     1

Error when reading chars values when restricting time chars in Query

Hi all,
since a few days I am not able to restrict time characteristics in queries on a particular Multiporvider. I can restrict the time chars with variables but not with fixed values.
I am getting the following error:
Reading Characteristic Values -> Programm Error in class SAPMSSY1 -> Uncaught exception.
The problem exists only on one particular multi provider, but when checking the MP it indicates no errors.
Anyone experienced something similiar? I am appreciating your help.
Thomas

actually it is a problem associated with SAP GUI 7.0.
A solution to this problem is
Just replace the file wdbspres.dll with in the following location
C:\Program Files\SAP\FrontEnd\SapGui.
You can search for this file on google and download it.
we also had faced this problem earlier...but after replacing the wdbspres.dll...it worked..
i hope this helps you.
pls assign points if this answer is of some help

Business Content TIME Char on Cal Week

Hi Experts,
With regards to my requirment is there any time char avaliable in business content
similar to
0CALMONTH     Calendar Year/Month
0CALMONTH2     Calendar month
is there any time char avaliable on Calendar week
0CALWEEK     Calendar Year/Week
Thanks
Krishna

Hi there,
there aren't any other similar time characteristics and you cannot create other custom time characteristics. Nevertheless, you can create a custom characteristic and use as a reference the appropriate time characteristic (e.g., 0CALMONTH, 0CALWEEK, etc.)
Regards,
Theodoros

Time Char issues

Dear BPS Experts,
I choose the Time char (eg Calendar year/Month) for the "Selection in Package"
and choose this as lead column, when i execute the layout , it prompt me
"Time characteristic cannot be used as an attribute". I am using the UPX_MNTN for my Planning Layout.
Does anybody know how to resolve this?
Thanks

Hi,
Please elaborate on the other characteristics that you have taken in the layout.
Regards,
Manoj

Time Conversion - DataSource to User Defined Time Char w/Ref

Hi, I have a Transformation into a DSO and i have created User Defined Time Char w/Ref.
ZSSDCALW     0CALWEEK     Sched Ship Yr / Week
ZSSDCALM     0CALMONTH     Sched Ship Yr / Mon
ZSSDCALM2     0CALMONTH2     Sched Ship Month
ZSSDCALY     0CALYEAR     Sched Ship Year
ZSSDCALQ     0CALQUARTER     Sched Ship Yr / Qtr
ZSSDCALQ1     0CALQUART1     Sched Ship Quarter
The source of these fields is not an InfoObject for an InfoObject to InfoObject assignment. The source of these fields is a date field zzschedate from 2LIS_11_VAITM and are currently set to direct assignment.
In the Transformation assignment only the 1st 2 new fields (ZSSDCALW and ZSSDCALM) show up with the Conversion Exit PERI6. The others do not show a conversion exit being assigned. Note: I read something about Function RST_TOBJ_TO_DERIVED_TOBJ, but not sure if this comes into the equation automatically.
Questions:
Can I directly assign the date field into all of these user-defined characteristics and conversion will automatically take place?
Or will it do it incorrectly because they are user defined date fields with reference?

I just wrote the routines in ABAP to finalize this question

[Forum FAQ] How do I have Invoke-SqlCmd return a date value without adding time

Introduction
A select statement executed from Invoke-SqlCmd returns a value from a Date column, the value has "12:00:00 AM" appended. The same select statement executed within SQL Server Management Studio displays the date properly without any time formatting.
Sample data is as follows:
How to have Invoke-SqlCmd return Date values without adding time for multiple Date type columns and pipe the output into CSV file?
Solution
In SQL Server 2012 or onwards, use the FORMAT() function to convert datetime values to date format when executing query from Invoke-SqlCmd. In earlier versions such as SQL Server 2008 R2, use the traditional CONVERT() function to format datetime values to
different date formats(yyyy.mm.dd, mm/dd/yyyy, etc) when executing query from Invoke-SqlCmd. Then pipe the output of SQL query result into CSV file by specifying export-csv parameter. An example is as follows.
Create a table named “Test_invokesqlcmd” that contains Date type columns in SQL Server.
USE Test
Go
CREATE TABLE [dbo].[Test_invokesqlcmd](
   [id] [int] NOT NULL,
   [name] [varchar](20) NULL,
   [test1] [date] NULL,
   [test2] [date] NULL
) ON [PRIMARY]
GO
insert into [dbo].[Test_invokesqlcmd]
values(1,'David','2014-10-15','2015-01-07'),(2,'Jane','2011-08-05','2012-11-7'),(3,'Crystal','2013-09-15','2010-02-24')
Define a query string, execute it from Invoke-SqlCmd and save the query result to a CSV file.
Scripts for SQL Server 2012:
$query1 = @"
    use Test;
    SELECT FORMAT(test1,'d') as newtest1, FORMAT(test2,'d') as newtest2 from dbo.Test_invokesqlcmd
write-host $query1
Invoke-Sqlcmd -Query $query1 -ServerInstance localhost | export-csv -notypeinformation -path c:\Files\test.csv
Scripts for SQL Server 2008 R2:
$query2 = @"
    Use Test;
    SELECT CONVERT(varchar, test1, 102) as newtest1,CONVERT(varchar, test2, 102) as newtest2
    FROM dbo. Test_invokesqlcmd
write-host $query2
Invoke-Sqlcmd -Query $query2 -ServerInstance localhost | export-csv -notypeinformation -path c:\Files\test.csv
Check the results in SQL Server PowerShell window and csv file.
SQL Server 2012:
SQL Server 2008 R2:
Reference
Using the Invoke-Sqlcmd cmdlet
SQL Server Functions that helps to convert date and time values to and from string literals and other date and time formats
Applies to
SQL Server 2014
SQL Server 2012
SQL Server 2008 R2
SQL Server 2008
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Cross posted. More appropriate in JSF forum so continue conversation there.
http://forum.java.sun.com/thread.jspa?threadID=717292&messageID=4142615#4142615

Airport Express for Itunes Invisible After Adding Time Capsule to AX Networ

One step forward, one step back.
I have an airport express linked to my airport extreme network for itunes streaming. It's worked fine forever. I recently added a time capsule to the extreme network for backup purposes using Time Machine. The extreme and TC form a single network are both connected via ethernet. The TC and express are in the same room. Time machine now is working fine. However, the airport extreme is no longer visible in itunes or airport utility. The light is green on the express and I was able to verify the settings when connecting it directly with an ethernet cable.
In setting up the AX/TC network, it called for the setting 'extend this network' not to be checked. Could that be it? As I recall, it wasn't anyway.
Any thoughts would be much appreciated.
JB

Got this working by directly connecting the Express and TC with and ethernet cable. I don't know if this is the right way for this to work since the two devices just happen to be near enough to do that. That said... I'm happy it's working.
JB

Laptop internet connection no longer works after adding Time Capsule to network

The other day I was setting up my Time Capsule for the first time at my new apartment (after having it in a box for months). I've got internet access through my apartment, so I haven't needed to use it as a router like I did the last time I used it. Also, the router is in another tenant's room. So I opened Airport Utility and adjusted the settings to add the Time Capsule to the network. After doing this, my laptop has lost its Internet connection. I can still connect to the network and my iPad has had no issues connecting to the same network and using the Internet, but the Internet won't work on my MacBook Pro (2006 model).
Since then, I've plugged an ethernet cable between my laptop and Time Capsule so I could find it on Airport Utility and change its settings to connect to the laptop via Ethernet. Also, I called my landlord and got the router reset.
I know the Time Capsule/Airport Utility is involved because the Internet connection died as soon as I tried adding my Time Capsule to the network.
Any suggestions?

I am having the same problem. It worked fine (connecting my iOS devices to my macbook pro using internet sharing) until Lion. Then it all went to ****.

Adding time stamp to table/array

Hi,
In my posted VI I am displaying some collected temperature data on a table. What I am having trouble with is getting the time data to work properly on the table. When I set the include time data to true, it reads out the time as 1904 etc. I'm not sure if it's possible for me to include a time stamp in my array because when I try to convert a time stamp to a double precision float, the output is still a cluster, and thus cannot be added to the array. I've also tried to convert the array to a string and concatenate the time stamp on, but the signals input for the table does not accept strings, and because I would eventually like to export this table to a spreadsheet in a file, I don't really want to link the strings to the indicator directly. I've tried to work with the instrument as well, but when I read time data from it it gives it back in the form of multiple numbers, such as 2008, 8, 28, 13, 30, 31.12 and I can't consolidate it to one number. Needless to say, I'm a little stumped and am open to suggestions on how to fix this problem, whether its a quick fix or a change in the way I'm trying to record the data.
Thanks in advance,
Mike
Message Edited by mbeenen on 08-28-2007 03:59 PM
Attachments:
Automated Thermal Testing Table.vi ‏75 KB

Here are the sub VI's that I'm using. The inner while loop is designed so that the loop will halt immediately when stopped, and not have to finish its current iteration, as the iteration period is intended to be rather long. I may modify the program to have a programmable start/stop time later, but this is at least my temporary solution. The purpose of the decimate array function is to seperate out the channel label from the actual data so they can be placed as headers in the Excel function. The intent was likely not clear with the lack of the SubVI's. Overall, the display table on the front panel is no longer necessary, it was just for me to see how the table was working in the early stages of development.
The one issue I had with your suggestion is the fact that I the build waveform function only accepts a 1-D array for the waveform input, and with multiple and variable number of channels being used I'm not sure how I could easily manipulate the data I gather into multiple 1-d arrays.
As always the help is appreciated,
Mike
Attachments:
Write_Table_To_XL_Mod.vi ‏39 KB
Conf Temp 2.vi ‏37 KB
EZ Temperature.vi ‏20 KB

"added time cap to existing network" and can't get Ethernet cable connection to Time cap to work...

I added a new time capsule to my existing wifi network. Everything initialized well and time machine could see the TC. I tried to connect a cable directly to the TC for the first backup... But the cable connection doesn't see the TC. Ideas?

If you used join a network then the TC turns off its ethernet ports.

Adding time char to infocube

Similar Messages

Maybe you are looking for