Adding titles after exporting large movie

Is there any way to add titles to an exported file simply? I just want to add on title to a section that I forgot to put in. I really don't want to wait another 4 and a half hours for imovie to export a new large movie. Any suggestions?

I suppose you could use QuickTime Pro to cut out just the portion of your movie needing titles and import that back to iMovie.
When you're done, export and copy and paste it back in again using QuickTime Pro.
http://www.apple.com/quicktime/pro/
It costs a few bucks, but QuickTime Pro is a handy tool to have around.
Matt

Similar Messages

I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

You can't. You can't export part of a sequence. Duplicate it and remove the bits you don't want to export from the duplicate.

After exporting finished movie project, one clip is gone but all others are visabel

I hope someone can help me out. After importaing my movie project from iMovie into FCPX I made some changes to the project and was able to exported it. After exporting, all clips we visable with the expection of one. How can I fix this? The original event is in my list so I have no clue what is going on.

File>Relink Event Files.

Poor audio quality after exporting to .MOV.

Voiceover in my video sounds crystal clear in the timeline but then thin and "rattley" after export when playing back with Quicktime player. Background music on other tracks always seems to be unaffected. Audio export set to AAC, 48 kHZ, Stereo. I must export to a Quicktime .mov format because it's the only file type that I can upload to YouTube without the color quality being distorted after upload. Adobe Updater says all of my programs are updated.
Any help would be greatly appreciated. Thanks!

How did you record the VO? is it a mono or stereo track, how are you viewing the export. Sometimes when just one section of the audio is wrong it is due to audio phase problems, I have not seen this with a vo before but it might be the issue. See:
Re: 1 of 2 audio tracks missing on certain browsers (h.264)

No sound after exporting to .mov

When I export to a .mov using QT the sound from my project is gone. I tried to exporting to movie and get sound on a .m4v file but would prefer a .mov Any suggestions?

I think the iPhone can only record in mono..... I haven't found a way to capture stereo yet.

Adding title after part of blog content.

On this blog example: http://www.untye.com/Home
The large image is part of the blog content. I want the blog title to go AFTER the image. Is there any way to make this happen?
Thanks,
Rick

Hi Rick,
Two options.
1. Move the image with javascript
2. If the image will always be a fixed height you can space the heading with margin and relative position the containing element and absolute position the first image of every blog post.

Can't export large movies

I'm having a problem in iMovie where the larger the movie is, the lower quality I can export it in. iMovie either always quits unexpectedly, or the export just stops and iMovie keeps running. I never had this problem on my old MacBook (late 2009) running Snow Leopard, but now I'm on a MacBook Pro Retina running 10.8.2. I have about 78 GB free on the hard drive, so that's not a problem. And I can't export it to an external drive, either. This is really frustrating: I could always export to full 1080p on the old MacBook, but can't do it on this brand new computer, and as the videos get larger, the lower quality it lets me export in.

Ok, I deleted Perian now. But the crash still occurs..
Process: iMovie [418]
Path: /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier: com.apple.iMovieApp
Version: 9.0 (1073)
Build Info: iMovieApp-10730000~3
Code Type: X86 (Native)
Parent Process: launchd [132]
Date/Time: 2010-11-14 20:52:38.903 +0100
OS Version: Mac OS X 10.6.5 (10H574)
Report Version: 6
Interval Since Last Report: 25712 sec
Crashes Since Last Report: 32
Per-App Interval Since Last Report: 12760 sec
Per-App Crashes Since Last Report: 32
Anonymous UUID: 24717918-4A36-47A5-950C-2095A6575DAF
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
building project tree
...built
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 com.apple.CoreFoundation 0x97ca3a95 CFUniCharDecompose + 1413
1 com.apple.CoreFoundation 0x97c98189 CFStringGetFileSystemRepresentation + 505
2 com.apple.CoreFoundation 0x97c97f7f _CFStringGetFileSystemRepresentation + 31
3 com.apple.Foundation 0x929c5c49 -[NSFileManager getFileSystemRepresentation:maxLength:withPath:] + 81
4 com.apple.Foundation 0x929cfcc8 -[NSFileManager fileSystemRepresentationWithPath:] + 207
5 com.apple.Foundation 0x929cfbf3 -[NSString(NSPathUtilities) fileSystemRepresentation] + 62
6 com.apple.Foundation 0x92a12017 -[NSFilesystemItemRemoveOperation main] + 54
7 com.apple.Foundation 0x929fe222 -[__NSOperationInternal start] + 808
8 com.apple.Foundation 0x92a11ea2 -[NSFileManager removeItemAtPath:error:] + 104

Jumpy video after Exporting Quicktime Movie from PS CS4 Extended

I am trying to produce a short training video for work. I created my entire movie in iMovie '09, and decided that it desperately needed some arrows and text to clarify some of the more technical aspects. I exported it as a Quicktime file from iMovie and imported into Ps CS4 extended.
After I finished the editing, I chose to export my video, again as a Quicktime movie.
The export completed, and when I went to review my movie, it was extremely jumpy. Watching the time line on the bottom of the Quicktime screen, I noticed that it was jumping in multiple second intervals. The audio portion seemed normal, but the video kept freezing and scrambling.
I attempted re-exporting the video with the Quicktime settings of Animation, and Frames Per Second set at current.
No difference.
Any ideas what I am doing wrong????

Marian -
Thank you for your response. I am only an amateur video editor, and up until now, I hadn't bumped up against the limitations of iMovie too often. You are definitely correct, it would FAR easier to do these effects in FCE, FCPro, AE, Premiere, etc., except for one thing . . . I don't own any of those programs! (I've already ordered a copy of Final Cut Express, but it stinks to have to spend $200 to get $7 worth of personal functionality.)
I do, however, own the extended Ps CS4. And, to paraphrase the guy on Lynda.com, "You already have it, and you know how to use it . . . It should work for you . . ."
This is the information on the file, it was exported this way automatically by iMovie (They don't give you much control over these functions.)
Unfortunately, I trashed my output from PS as well as the .psd in a fit of rage! It wouldn't take me more than 30 minutes to recreate it . . .
Would it be worth attempting to export it using H.264 instead of the animation Codec?
Message was edited by: dmisita

Audio is not synced with video after Exporting QuickTime Movie

I have Canon DSLR footage shot 24p/1080p on the timeline. Timeline settings are the same as the Canon footage settings.
When I Export a QuickTime Movie, the audio is out of sync...
Can someone please help with this issue...
Thanks,

Don't tell me...you edited the files the camera shoots without converting, right? The camera shoots H.264...FCP doesn't like to work with H.264. The problem is that it SEEMS like it will work, but really is rife with issues when trying to work with it. You have encountered one...loss of sync.
The proper workflow is to convert the footage first...
#51 - Canon 5D MkII / Canon 7D footage into FCP
Shane's Stock Answer #51 - how do you bring in footage from the Canon 5D and 7D cameras into FCP to edit?
You need to convert all of the Canon 5D MkII footage from the H.264 format that it records, to ProRes 422 (ProRes HQ is unnecessary...no quality difference) Yes, the file sizes get drastically larger. H.264 is an acquisition and delivery format, not an editing one.
You can use the Canon EOS Log and Transfer plugin that works with the 1D, 5D and 7D cameras. This plugin is great because it brings in the camera's TIME OF DAY as timecode, instead of starting each clip at 00:00:00:00 like Compressor or other conversion software will do.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mo delid=17662#DownloadDetailAct
Here is a tutorial on how to use it:
http://provideocoalition.com/index.php/ssimmons/story/canon_releases_a_dslr_plug _in_for_final_cut_pros_log_and_transfer_tool/
And the workflow for tapeless ingest into FCP:
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
But for a quick fix...change your SEQUENCE SETTINGS to ProRes...render, and then export.

Exporting larger .mov files

I've read that using standard (4:3) or widescreen (16:9) projects, iDVD can only handle 15 mins or 7.5 mins of video respectively in drop zones. I know that this is probably a dumb question but how else can I get a larger video onto a disk?
Thanks

Thank you. That's very helpful. I have a couple of follow-up questions if I may. A 2 hour video would obviously be a very large file. Would this have to be exported from FCE in a compressed form to burn a DVD? If so, which format? Also, when I export from FCE using "Quicktime movie" fully contained, I end up with two .mov files: one wiht the Quicktime logo and another with a clip from the film on the thumbnail. The latter is what I have been using. Thanks again!

Jagged images after export to .mov format

Hi everyone reading,
In a project I'm working on in FlashCS3 Pro, I have a problem
with export > Quicktime film > ect.
When the encoding to the .mov format is finished and I play
my new created movie in QuickTime
a lot of images are jagged, not complete or the previous
frame remains in the vieuw.
How can I get a real clean and proper encoding from a .fla to
QuickTime H.264 or QT Animation?

Welcome to the discussions, evorot69.
If your original file is an MPEG file, you'll need to use MPEG Streamclip in order to convert it to an iPhone format WITH the audio.
http://www.squared5.com/svideo/mpeg-streamclip-win.html

Why does "Â" show up in image title after export?

This drives me nuts. When exporting files, the title changes on my images. The character "Â" appears within the title of my image. It's doesn't appear when I look under Library>Metadata. So everytime I use the exported files on my blog, I need to go in and change the name to a whole gallery of images.
Please help.

portergraph wrote:
LR/Mogrify - been using it since LR came out for years without issue and now lately using LR3, I get that character.
I would try disabling LR/Mogrify just to see if it's in the game. Are you aware of the fact you need LR/Mogrify 2 on LR3?
Beat

Misalign animated titles after exporting videos in PE7- help needed

Hello, I'm a new user in PE7, I'm facing this problem on the animated texts titles where the positioning of the tiles will be out of alignment and somehow shifted say few cm away from the original position. The preview windows shows the texts effects alignment correctly but not when I exported the video.
The titles alignment will not be WYSIWYG (What you see is what you get.) Please advise. Thank you very much.

As ATR points out, this is not directly possible in PrE. PrPro CS4 allows one to just do a new Sequence (think of a mini-Project inside a Project), but that is the best.
I have not tried Paul_LS's method, though I have done other editing of the .PREL and PRPROJ (same type of file for PrPro) files in WordPad.
I'd do a Save_As (maybe increment the filename by 1, or "test") and work with that file, in case something goes horribly wrong. It should work, but you do not want to run the risk of loosing everything, even if you are likely to have to start from zero.
Because PrE does not allow for two, or more Projects to be Open at the same time, and will not run multiple instances of itself, the simple Copy/Paste does not do us any good. PrPro, with its Sequences, does allow for Copy/Paste between the Sequences. However, there is a program Clipmate, that allows for the Copy/Paste between one Project and another. I have not used it, as I use PrPro and have not needed it. Robert Johnson did several articles on Clipmate and it seemed to work well for many folk. I do not know if it's freeware, or shareware, but Google will track it down for you.
Good luck, and glad that it was just the Project Preset and nothing else.
Hunt

All audio disappears after exporting to .mov file

I'm creating a short 'montage' piece, and all audio is muted except for a song which I added into the timeline. I've tried exporting it several times, even replacing the source file for the song, but nothing seems to work. The audio is visible and playing in the timeline, but as soon as I export it, it magically disappears.
Any suggestions?

Adding to Russ's comments and questions: if you are exporting a file, you get to choose to export only audio, only video or both. Check your setttings in that regard; to complicate matters, this setting sometimes does not stick (a known bug in 10.0.8). If that is the case, the usual workaround is to change some other parameter, make an export (which you can cancel), then go back to the export panel and change it back.

Adding titles after exporting large movie

Similar Messages

Maybe you are looking for