Adding to Existing Collections?

I can select a bunch of images displayed in the Library, click on the "+" in the Collections tab and save the selected images to a new collection.
Now, I get some different images selected in the Library, and want to add them to the above collection. How do I do this? I can drag and drop individual files but not, it seems, groups of files. I see that a "Control + Click" allows me to DELETE the selected files from the collection, but I cannot find a command to ADD the files to a collection.
Sorry to be so lame, I am hoping there is an obvious answer I have overlooked while pulling my hair out looking through all the menus.
Ralf-Finn Hestoft
www.hestoft.com

Either drag them to the collection, or select them, right click the collection, and choose "Add selected photo(s) to the collection".

Similar Messages

Adding photos to an existing collection

I'm having such a hard time adding several photos at once to an existing collection. Not sure what I'm doing wrong as I am following the insturctions. First I select all the photos by clicking shift and the 1st photo, then I select the last photo. All photos I want to add are highlighted. But I can't drag all the photos at once. When I try to drag, the 1st photo is only selected. What is are the correct click, drag and drop key strokes to get it right? Dragging and dropping one photo at the time is just not feasible.

Monia,
I think what you're being caught with is that you have to drag and drop the image from the center of the thumbnail, and not from the gray border.
Beat Gossweiler
Switzerland

Adding a field to existing collective search help

we tried to add a custom field to already existing collective search help
for this we tried to copy the search help exit "F4IF_SHLP_EXIT_VENDOR_EXP",
but we are unable to activate the copied function module since it's throwing a error that
a statement in one of the includes that was created by the system is inactive.
Thanks in advance,
Raj

Hi Venkata,
Datasource Enhacement:
Please check : [Enhancing LO DataSource u2013 Step by Step|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46]
after adding new field to datasource, need to populate using ABAP code in User Exit.
Adjust update and transfer rules of 0Customer and load data.
how can I add that field in 0SD_C03 cube.
--> In 0Customer infoobject, make Sales District as Navigational attribute and also activate as navigational in CUBE: 0SD_C03. Then it will be available for reporting for navigation, filtering.
Hope it Helps
Srini

Adding images to an existing collection

Using a PC how can you add selected images to an existing collection. Dragging, as per LR help, would appear to be for Mac users only.
Many thanks
Tom

Canon EOS 400D (aka. XTi) • 20" iMac Intel • 12" PowerBook G4 • OS X 10.4 • LR 1 • PSE 4

Error adding RDSH to existing collections: Unable to retrieve the session collection properties

I've randomly experienced a problem on our production server. I can no longer add RDSH servers to existing collections but I can create a new collection. The error message from add-rdsessionhost:
Unable to retrieve the session collection properties.
+ CategoryInfo : InvalidResult: (:) [], RDManagementException
+ FullyQualifiedErrorId : JobStateFailed
+ PSComputerName : localhost
I can amend the rds.RoleRdsh table to add the server to the collection but more gtables need to be edited manually to get it working. There appears to be some kind of permissions issue editing exisitng collections but not new ones? I'm not aware of anything
that has changed since I last amended a collection, the day before.
Any help would be appreciated. I can provide more information if necessary.

Hi,
Based on my research, there was a similar case where an empty collection existed in Connection Broker SQL database, deleting the empty collection resolved the issue.
Please run PowerShell cmdlet Get-RDSessionCollection
to list all collections in the RDS deployment.
Get-RDSessionCollection
https://technet.microsoft.com/en-us/library/jj215456.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

I have and existing collection. How can I merge images in a Quick Collection into the existing one?

I wish to add images to an existing collection. Currently I want to add images in a Quick Collection into an already named collection. I am using LR3. How do I do that?

Select and then right-click the collection that you want the images added into. Select <Set as Target Collection>. A "+" sign appears besides this collection.
Then select your Quick Collection (or whatever images you want to add to this collection) in the Grid Mode. Click Ctrl/Cmd + A to select all images in this collection. Then press letter "B" on your keyboard. That will add all these images to your target selection.
WW

After adding seperate performance collections to MAP 9.1 database, the database has become corrupted

Hi,
I have installed MAP 9.1(9.1.265.0) on my notebook, with Windows 7 Enterprise. The inventory of our environment was successfull and I have successfully added some performance collections to the database.
First I ran the performance collection for one hour, then added a performance collection of one week. this was okay.
Then I waited one week and added another collection of about five days. That collection would not stop: It was scheduled to run between 2014-07-28 12:49:31 until 2014-08-01 05:00:04. But it was still running at 2014-08-01 05:30:25. I waited for a little
bit longer, but the collection kept on running according to the status screen.
So I cancelled out of the collection at 2014-08-01 05:45. In the performance data it said that the colection ran from Jul 14 2014 08:04 AM until Aug 1 2014 4:57AM. So that looked okay.
But now, when I try to Get the performance metrics data from MAP, it states that I have to do a "Refressh Assessment", because I problably have cancelled out of a collection. This "Refresh Assessment" wil run for about an hour and than
completes with a message "Failed"
I get these errors in the MapToolkit.log
<2014-08-05 05:14:51.09
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[ClearPerfdata]] : 125 ms
<2014-08-05 05:14:56.13
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateTimeIntervals]] : 5039 ms
<2014-08-05 05:22:47.76
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateMetricsPerTimeInterval]] : 471591 ms
<2014-08-05 05:52:54.66
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught InvalidOperationException trying to roll back the transaction: This SqlTransaction has completed; it is no longer usable.
<2014-08-05 05:52:54.79
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:15.86
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:20.99
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 05:53:45.00
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 06:24:03.69
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 06:54:13.91
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 07:24:28.99 AssessInventoryWorker@Analyzer,E> RunAssessments() - Assessment threw an exception:
<2014-08-05 07:24:29.03
AssessInventoryWorker@AssessInventoryWorker,I> AssessmentCompletedEventHandler: Assessment completed event.
<2014-08-05 07:24:29.09
AssessInventoryWorker@TaskProcessor,I> WorkerCompleted: Worker: 'AssessInventoryWorker'
<2014-08-05 07:24:29.15 TID-16@TaskProcessor,I> Run: Completed. Status: Failed
Is there maybe a restriction to the intervalls of adding performance collection data, or is there something else I am doing wrong?
(I made a backup of the database after the first week of performance data, that database is still usable, so I can try to add more performance collections to that version of the database)
I hope someone has an idea what is going on.
Thanks!

Time between isn't the problem. If you look in the log file, SQL is timing out. I think the problem is machine resources and time related. After the performance data collection has run for the predefined amount of time, MAP has SQL execute various assessments
on the data to aggregate the raw data into something MAP can use. The more raw data that exists, the longer SQL will take and the more CPU and memory resources SQL will need.
I would recommend that you have at least 4 cores or vCPU's and 6-8 GB of memory dedicated to the machine on which MAP is running. I would also follow the directions in this Wiki article to increase the timeout in MAP so that MAP will give SQL the time it
needs to complete the job.
http://social.technet.microsoft.com/wiki/contents/articles/10397.map-toolkit-increasing-the-sql-database-timeout-value.aspx
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Cannot add images to existing collection

I cannot add images to an existing collection. When I am in the Library/navigator modus, and I grab one or more images, I can not drag them to an existing library. I do can however, drag an entire collection to a collection set, but that is not what I want.
Anyone any idea?
Lightroom 3.4.1 & windows 7
gr,
René

René,
I can think of three possibilities:
--You can't drag images to smart collections. Only regular collections.
--You can't drag an image to a collection set.
--You have to drag by the image, not the border.
Hal

No scroll bar for Existing Collections in App Data View?

Looks like there is a limit to how many collections you can view because a scroll bar isn't provided. Probably depends on screen size?

Hi Thor/Peter,
You are correct about the "Existing collections" view. This something we are aware of and will work to add more flexibility in our future updates.
The backstage was designed as a location to preview your data to get an idea of what is available/stored. This is why it is marked as "Preview" in your screenshot. This also helps with performance and therefore only five items are visible at a
time.
Many thanks for the feedback.

"Your script uses objects from a non-existent collection"

I have a multiple page form with a barcode on each form. I created a separate collection for each barcode. The auto generated code looks fine and has the correct collection created, however I still get the error, Paper Forms Barcode error "Your script uses objects from a non-existent collection".
I'm not sure what is wrong and I don't know how to fix it. Anyone else run into this?

You will need to create a shared folder in Dropbox, then populate that with what ever folders you need to organize the files. It appears the DropBox app,will not handle this, but you can do, it by logging in to you account via Safari. Once the folders are created, they will show up in the app. Likewise with designating the folders as shared. Anyone you wish to share with will need a Dropbox account. (using the public folder will not work since links out it are for files only, not folders. An odd restriction, but it is what it is).
IF you have copies of the files on a PC, you will find that will be the easiest place to upload them from. If they are only in iBooks on the iPad, you will need to synch and use the file management function to copy them off. not sure if you can synch them back over to DropCopy within iTunes (never tried it).
DEpending on your needs, a couple of apps to look into are iCab Mobile (a browser), and GoodReader (doc viewing and management app). Both integrate well with DropBox.

HT201303 I have a new ipod added to existing laptop itunes account it is now asking a security question i have not answered help

I have a new ipod added to existing laptop itunes account it is now asking me a security question I have not answered - can anyone help please ?

Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(88450)

Error Adding object to collection

Hi all... I'm using Toplink + ADF Faces...
We have the following problem: There are 2 tables involved, table A and table B
Table B has a FK to table A, therefore a one-to-one mapping from B to A and a one to many mapping (collection) from A to B.
What I want to do is to add an object of type B to the collection of an A object. I'm showing an input form for the constructor of type B, a submit button, and a read only table bellow to show the items of the collection. I have done this several times and worked fine, now I have NO clue why this is not working.
What I used to do to achieve this is to call the method of the type A "addB(B)" (to add the object) and then the "Execute" operation (to refresh the table shown) of the collection in which the addB method is adding objects.
What I get is just:
2006-11-17 13:53:30.421 WARNING JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
2006-11-17 13:53:30.421 WARNING java.lang.NullPointerException
and no more details.... :-S
Does anyone know why this could be happening???
or
Is there some other way of adding objects to a collection using ADF and toplink?? Any suggestion is more than welcome!! I've been trying for too long to solve this... :-(
Thanks in advance

Here is another symptom:
a few days ago, I developed a search page of objects of type "C". This type, has a collection of objects of type "B". This page is working fine, now... I do exactly the same steps to create a new page with the same search functionallity, and I get the same NullPointerException described above (with no extra information).
Since the development of that working page until now, I manually added the mapping of table "A", which was not mapped by the time we developed the working search page. So I guess something is wrong with this new mapping.
Here are the steps i did to map the new table "A" and define the relationship with table B (through a foreing key defined in DB):
- created Java objects from tables for table "A".
- added a FK from "B"->"A" in table "B" in the Offline Database Sources (just like the FK in the real DB)
- added a ValueHolder attribute to class "B" (with the appropiate get and set, and initializing it in the constructor of class "B")
- added a List attribute in class "A" of objects of type "B" (with the appropiates add, remove, get and set methods), and initializing the List as a new ArrayList in the constructor.
- in the toplink map, mapped the new attributes:
one-to-one for the Valueholder in class "B" (using the appropiate FK)
one-to-many for the List attributes in class "A" (using the appropiate FK)
- refreshed all possible datacontrol
And thats it... am I doing something wrong or missing something??
Is there any other way to map a new table into an existing toplink mapping? I'm using Jdev 10.1.3 Integrated workbench...
I will really appreciate any suggestion or comment, I really have no clue why this is happening.... Thanks in advance

New MovieClips added to existing SWC library not available in Flash Builder

To be as brief as possible with this...
I have 2 swc libraries in my Flash Builder Project. One is in a "Common" project and the other one is in a MobilePlayer project. Obviously the "common" project contains UI assets that apply across the board, while the MobilePlayer version contains assets specific to that version of the application.
Both swc files are in the respective libraries for each project we are referencing. Up until yesterday I could add new MovieClips to the "common.swc" and they would be available across the board instantly.
Sometime yesterday I could not get new MCs added to my "common.swc" to show up in the intellisense, or become avaialble whatsoever.
For troubleshooting I am creating a Square, turning it into a MC symbol, exported for AS with a classname of "Fubar"
whenever I try and create a new instance of :Fubar() to anything anywhere in my applicatioin I get the Call to possibly undefined method Fubar error message. It does not show up in intellisense menus and it is NON EXISTENT.
HOWEVER — Named movieclips within my .swc library I have already been using such as "CompanyLogo()" etc etc are STILL fully available and can be referenced from anywhere in my application. I can add a new CompanyLogo() anywhere I want with no problem.
As ANOTHER test, I REMOVED the movieclips CompanyLogo (and others) from my Library and re-saved the SWC.
All of a sudden Flash Buider generates a compiler error (undefined method) for each missing referenced MC in the swc file (obviously, because they are no longer there).
However, those named MCs still show up in intellisense menus etc etc.
Basically what I can determine is that Flash Builder is not updating and picking up any changes to this SWC library whenever anything is added or removed from it. At some point it became "locked" in memory (for lack of a better term) and it refuses to recognize that the file has been changed.
When I extract the catalog.xml from the SWC and read through it, I can find nodes for every single NEW mc I've created yet I cannot get them to show up in Flash Builder. I refresh, close and restart Flash Builder and have done everything I can possibly think of to get my updates to register and they refuse.
On the other hand my "mobile.swc" updates just fine as I make changes to it. If I add a new MC to it, it is instantly available. If I take away a MC it FB instantly recognizes that it is gone.
Am I doing something wrong here or am I correct in my assumption that for some reason FB refuses to update the contents of my "common.swc" library into memory?
Any insight would be appreciated as I cannot find a single relevant answer in 3 hours of Google searching.

OK,
Now I see what is really going on. I am trying to reference MCs from my "common.swc" lib which is in a different project, and the reason they are showing up and available is because I used them in MXML files within the "common" project that are called upon and loaded before the mobile specific login screen MXML is loaded.
I just did a quick test to see if the new button I created would be available within the "common" project and it is there, and shows up with intellisense etc etc as expected.
When I add an instance of my new button to a MXML file being loaded before the mobile specific stuff I can then drop it into my mobile specific screens and it shows up.
I either need to figure out how to reference MCs within a swc inside of a different project directly, or just declare them when the application first loads.

Root element added in existing mapping PI 7.1

Hi Experts,
I got existing mapping with around 500 fields, the source structure is external defination, they added the root element to existing xsd, when i try to import the external definition into the mapping it is giving following error.
Function model undefined (FUNCMODEL_UNDEF)
MESSAGE ID: com.sap.aii.mappingtool.mf.mapping.rb_Mapping.FUNCMODEL_UNDEF
Parameter AMappingTool has the invalid value null
Is anyone faced this problem before, i am working on PI 7.1, but when i create the new mapping then i can successfully imported the external definition into mapping, but how can i get my existing mapping into new mapping??
Thanks

> Is anyone faced this problem before, i am working on PI 7.1,
Yes, indeed. Report this to SAP.

SCCM 2012 PowerShell script gets progressively slower with each machine added to a collection

Firstly, I hope this question firs in this forum.
I have a PowerShell script that I created the imports a CSV file and adds the machine names to a collection as a direct membership. There are 5000 machines total in the list. When the script first starts, the average per machine is just a few tenths of a
second. Once it reaches about 10% the average is up to almost 4 seconds and that time is getting larger with each machine. I tried using the CMDLets for SCCM but they were even slower than the WMI seemed to be.
What is the reason for this increase?
Is there anything I can do to not have this happen?
My script:
$ErrorActionPreference= 'continue'
$FilesInFolder = Get-ChildItem $PSScriptRoot
$CSVFiles = $FilesInFolder | where {$_.extension -eq ".csv"}
$SiteCode = "US1"
Function AddToCollection-WithWMI
ForEach ($File in $CSVFiles)
$CollectionStart = Get-Date
$CollectionName = $File.Name.TrimEnd(".csv")
$PClist = Import-CSV $File.FullName
Write-Host "Populating Collection: " $CollectionName
$i = 1
$PCRollingTime = New-Object System.TimeSpan
ForEach($PC in $PClist)
$PCStart = Get-Date
$ResourceName = $PC.SerialNumber
Write-Host $i "of" $PClist.Count
$ResourceQuery = Get-WmiObject -Namespace "Root\SMS\Site_US1" -Class SMS_R_SYSTEM -Filter "Name = '$ResourceName'"
$CollectionQuery = Get-WmiObject -Namespace "Root\SMS\Site_US1" -Class SMS_Collection -Filter "Name = '$CollectionName' and CollectionType='2'"
$CollectionQuery.Get()
IF($ResourceQuery -ne $null)
#Create new direct membership rule
$NewRule = ([WMIClass]"\\Localhost\root\SMS\Site_US1:SMS_CollectionRuleDirect").CreateInstance()
$NewRule.ResourceClassName = "SMS_R_System"
$NewRule.ResourceID = $ResourceQuery.ResourceID
$NewRule.Rulename = $ResourceQuery.Name
#Commit changes
$CollectionQuery.CollectionRules += $NewRule.psobject.baseobject
$CollectionQuery.Put() | Out-Null
$NewRule = $null
ELSE
Write-Host "No Device ID found for: " $PC.SerialNumber
$CollectionQuery = $null
$ResourceQuery = $null
$PCFinish = Get-Date
$TimeSpan = New-TimeSpan -Start $PCStart -End $PCFinish
$PCRollingTime = $TimeSpan + $PCRollingTime
If(($i % 25) -eq 0)
$CurrentAvgPerPC = $PCRollingTime.TotalSeconds / $i
Write-Host "The current average is" $CurrentAvgPerPC "seconds."
$SecondsToETA = ($CurrentAvgPerPC * ($PClist.Count - $i))
$ETA = Get-Date
$ETA = $ETA.AddSeconds($SecondsToETA)
Write-Host "The Estimated time of complete is" $ETA
If(($i % 250) -eq 0)
$PCRollingTime
$i++
$CollectionQuery = Get-WmiObject -Namespace "Root\SMS\Site_US1" -Class SMS_Collection -Filter "Name = '$CollectionName' and CollectionType='2'"
$CollectionQuery.Get()
#Initiate the collection evaluator
$CollectionQuery.RequestRefresh()
$CollectionFinish = Get-Date
AddToCollection-WithWMI

I haven't checked the complete code, but it doesn't look very efficient. For example I would take the collection query out the loop for all the pcs, simply because it's always the same and would save you about 4999 queries.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
^^ This
Additionally, you could likely replace most of the WMI calls you do with the built in SCCM PowerShell cmdlets. The two lines below will check to see if a Device Object for a specific PC exists and if it does, adds it to your collection
$PCID = Get-CMDevice -Name $PC.SerialNumber
if ($PCID -ne $null) {
Add-CMDeviceCollectionDirectMembershipRule -CollectionName $CollectionName -ResourceId $PCID
If you want to check to see if the collection exists before trying to add devices to it, you can use the Get-CMDeviceCollection cmdlet.
Get-CMDeviceCollection -Name $CollectionName
Moo.

Adding to Existing Collections?

Similar Messages

Maybe you are looking for