Adding to the template sidebar

I want to create quick access to categories of my own templates in the sidebar panel of Template Chooser.
This is because I have a large number of documents in 'My Templates' - more than Apple supplies in its selection, and I would like to be able to access these quickly by category. To clarify - I would like to add folders that are as easy to find (and label) as the folders that can be dragged into the left hand side bar of Finder.
I have tried adding folders in the iWork template folder in Application Support, but that doesn't seem to work.
Is there any way to do this?
Thanks.

You can add folders which names you'll see in the Template chooser! You add folders within the Template folder. Your name > Library > Application support > iWork > Templates
!http://img153.imageshack.us/img153/9466/templateinlibrary.png! !http://img811.imageshack.us/img811/558/templatechooser.png!
Message was edited by: fruhulda

Similar Messages

  • Error while adding a second template to the same data definition

    Hi,
    I am quite new to XML Publisher. I am developing a report using XML Publisher.
    I have added one template to the Data Definition. When I tried to add another Template(with different name as previous, to the same concurrent program and application) to the same Data Definition I am getting the following error.
    Error: You entered a duplicate template entry. Please change the Name, Code and/or Application and reapply.
    Can anyone help me out solving this problem. I am reaching my deadline. Please suggest me what can be done.
    Regards,
    Sita

    Hi
    Try to change the Template code name also and then check it.
    Thanks
    Sudheer

  • Is there a way to permanently set items you have added to the sidebar?

    Every time I log out or restart my computer, the items I've added to the sidebar disappear. Is there any way to edit a .plist file or something to make these items a permanent part of my sidebar? Thanks for any help with this.

    Same question.
    I recently left Snow Leopard to Mountain Lion.
    Previously, in the side bar of Mail, (the one you make visible using "Show" in a previous post here), I was able to drag and drop any of the Reception mailboxes to the place I wanted to select, to put them in the order I wished, and this order remained until I decide to change it.
    This seems not possible any more, or... just for the current session. If I close Mail and reopen, Reception boxes are re-ordered in alphabetic way.
    Any way to make my choice permanent as before ???
    To make it more clear, ordering my way is possible by drag and dropping for private mailboxes, but not for reception mailboxes associated to different mail accounts, the order is lost once Mail is closed.

  • Adding parameters in the Template

    Hi,
    How can i add the parameters in Template.
    Regards

    Put this line in the beginning of the template:
    <?param@begin:P_PARAMETER?>
    Then refer the parameter any place you need:
    <? $P_PARAMETER?>

  • Two questions - adding pages once the template is done and searching this site for already answered

    I have my template in .dwt and am ready to add new pages.  I forgot where to begin.  I know it is something super easy (the whole point of making the template), but I scrubbed my brain over Christmas and now have no idea.  Thanks.
    Is there an easy way to search this blog?  Maybe folks have asked my questions in the past and I can find their answers.  Couldn't find how to search.  Thanks, O Patient People.  -the newbie

    To search this web forum, go to "Ask a Question" on top of the Discussions page.  Simply type your question and hit Enter.
    Or use Google to search forums.adobe topic.
    Nancy O.

  • Nothing added to the table of contents

    I'm using the "Biography" template (portrait only) in iBooks Author. According to Help,
    "By default, the table of contents includes all paragraphs in the book that use the Heading 1 and Heading 2 style, but you can include whichever styles you like."
    So I paste some text into the first two pages of my new book. I select a line of text, show the Styles drawer, and click Heading 1 or Heading 2.
    I choose Table of Contents from the sidebar, and there's nothing added to the table of contents. I preview it on my iPad. Same problem.
    Am I doing something wrong?

    Hello Nick,
    Jquery may be help you to create own TOC and add custom links into it. Here is some ref for you:
    http://tommdaly.wordpress.com/2013/06/27/customize-table-of-contents-remove-libraries-navigation-headers/
    http://sharepointsharpener.wordpress.com/2011/09/27/quick-fix-remove-libraries-lists-from-toc/
    You may also create one custom list and add link to this list. Then get link from this list and place in webpart wherever you want.
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How do I stop the firefox sidebar from flipping open and shut non-stop and driving me to almost smash my keyboard through the screen???

    I love firefox but the sidebar is a massive turn-off. It flips open and shut when your pointer inadvertently goes near the thing. If I had just started with firefox and had no history of it being brilliant (apart from insanely slow to open) I would never give it a second look. Dump the dumb sidebar thing or make it so you at least have to click it. As it is it's the single most annoying thing I've encountered in computers since I had windows Vista as an operating system - and we know how that story ended...yes in tears.
    Don't let that happen to firefox - it is too fantastic for a pathetic feature like this to unwind all the hard work of countless people around the world.
    If you cant piss it off for good at least make controlling it a primary informative guidline in Help.
    Seriously, it is worse than Vista and Millenium put together on the irritation index!! Only a true masochist (*ok, your average geek) would put up with it.
    There, that's better it's now off my chest. I need to take up Yoga.

    Sounds that you have installed an extension that has added that feature because Firefox doesn't do that by default.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • About the template FSCM9.1 FP2 Peopletools 8.52.03 (v4 - July 2012)

    Hello,
    Just tested quickly this new template delivered 2 months ago (July 2012).
    As far as I undestand, it is just a recut of the one delivered in April 2012. At least it solves the main issue I reported in that other About the template FSCM9.1 FP2 Peopletools 8.52.03 (v3) about the network prompt missing.
    But I still have remarks/issues on the template FSCM9.1 FP2 Peopletools 8.52.03 (v4) released earlier in July 2012.
    _1. First of all, there a lot of errors reported in /var/log/messages_
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.883:3): avc:  denied  { read } for  pid=92 comm="restorecon" name="libc.so.6" dev=xvda2 ino=21 scontext=system_u:sys
    tem_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.910:4): avc:  denied  { execute } for  pid=92 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
    system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:5): avc:  denied  { read } for  pid=296 comm="pam_console_app" name="ld.so.cache" dev=xvda2 ino=94143 scontext=s
    ystem_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:6): avc:  denied  { getattr } for  pid=290 comm="pam_console_app" path="/etc/ld.so.cache" dev=xvda2 ino=94143 sc
    ontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:7): avc:  denied  { read } for  pid=293 comm="pam_console_app" name="libc.so.6" dev=xvda2 ino=21 scontext=system
    _u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:8): avc:  denied  { execute } for  pid=293 comm="pam_console_app" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 sco
    ntext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
    Sep 13 05:02:55 localhost kernel: input: PC Speaker as /class/input/input3
    Sep 13 05:02:55 localhost kernel: Initialising Xen virtual ethernet driver.
    Sep 13 05:02:55 localhost kernel: Error: Driver 'pcspkr' is already registered, aborting...
    Sep 13 05:02:55 localhost kernel: Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
    Sep 13 05:02:55 localhost kernel: floppy0: Unable to grab IRQ6 for the floppy driver
    Sep 13 05:02:55 localhost kernel: lp: driver loaded but no devices found
    Sep 13 05:02:55 localhost kernel: md: Autodetecting RAID arrays.
    Sep 13 05:02:55 localhost kernel: md: Scanned 0 and added 0 devices.
    Sep 13 05:02:55 localhost kernel: md: autorun ...
    Sep 13 05:02:55 localhost kernel: md: ... autorun DONE.
    Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda2, internal journal
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526929.896:9): avc:  denied  { execute } for  pid=965 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext
    =system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
    Sep 13 05:02:55 localhost kernel: kjournald starting.  Commit interval 5 seconds
    Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda1, internal journal
    Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Sep 13 05:02:55 localhost kernel: kjournald starting.  Commit interval 5 seconds
    Sep 13 05:02:55 localhost kernel: EXT3 FS on xvdb1, internal journal
    Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526930.647:10): avc:  denied  { execute } for  pid=989 comm="setfiles" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
    system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526942.398:11): avc:  denied  { net_admin } for  pid=990 comm="setfiles" capability=12  scontext=system_u:system_r:setfiles
    _t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=capability
    Sep 13 05:02:55 localhost kernel: hrtimer: interrupt took 35229469 ns
    Sep 13 05:02:55 localhost kernel: Adding 2104504k swap on /dev/xvda3.  Priority:-1 extents:1 across:2104504k SS
    Sep 13 05:02:55 localhost kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23.
    Sep 13 05:02:55 localhost kernel: Loading iSCSI transport class v2.0-870.
    Sep 13 05:02:55 localhost kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
    Sep 13 05:02:55 localhost kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
    Sep 13 05:02:55 localhost kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
    Sep 13 05:02:55 localhost kernel: iscsi: registered transport (cxgb3i)
    Sep 13 05:02:55 localhost kernel: NET: Registered protocol family 10
    Sep 13 05:02:55 localhost kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
    Sep 13 05:02:55 localhost kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Jan 06, 2010)
    Sep 13 05:02:55 localhost kernel: iscsi: registered transport (bnx2i)
    Sep 13 05:02:55 localhost kernel: iscsi: registered transport (tcp)
    Sep 13 05:02:55 localhost kernel: iscsi: registered transport (iser)
    Sep 13 05:02:55 localhost kernel: iscsi: registered transport (be2iscsi)
    Sep 13 05:02:55 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
    Sep 13 05:02:55 localhost kernel: warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
    Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526970.336:12): avc:  denied  { sys_tty_config } for  pid=1374 comm="consoletype" capability=26  scontext=system_u:system_r
    :consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
    Sep 13 05:02:55 localhost kernel: RPC: Registered udp transport module.
    Sep 13 05:02:55 localhost kernel: RPC: Registered tcp transport module.
    Sep 13 05:02:55 localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Sep 13 05:03:00 localhost automount[1769]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
    Sep 13 05:03:59 localhost kernel: type=1400 audit(1347527039.771:13): avc:  denied  { sys_tty_config } for  pid=2029 comm="consoletype" capability=26  scontext=system_u:system_r
    :consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
    Sep 13 05:04:00 localhost NET[2061]: /sbin/dhclient-script : updated /etc/resolv.conf
    Sep 13 05:04:01 localhost kernel: IPv6 over IPv4 tunneling driver
    Sep 13 05:04:01 localhost NET[2219]: /opt/oracle/psft/vm/oraclevm-template.sh : updated /etc/resolv.conf
    Sep 13 05:04:08 localhost NET[2472]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
    Sep 13 05:06:08 localhost restorecond: Reset file context /etc/resolv.conf: system_u:object_r:etc_runtime_t:s0->system_u:object_r:net_conf_t:s0
    Sep 13 05:08:19 localhost kernel: Slow work thread pool: Starting up
    Sep 13 05:08:19 localhost kernel: Slow work thread pool: Ready
    Sep 13 05:08:19 localhost kernel: FS-Cache: Loaded
    Sep 13 05:08:19 localhost kernel: FS-Cache: Netfs 'nfs' registered for caching
    Sep 13 05:08:19 localhost kernel: svc: failed to register lockdv1 RPC service (errno 97).
    ...Well, I don't know if it triggers others problems yet, but the last line could reveale an error within the /etc/hosts file which has not been properly modified during deployment (especially IPV6, it probably should be removed) :
    [root@psovmfscmfp2 /]# more /etc/hosts
    127.0.0.1       localhost.localdomain   localhost
    ::1     localhost6.localdomain6 localhost6
    192.168.1.150   psovmfscmfp2.phoenix.nga psovmfscmfp2
    [root@psovmfscmfp2 /]#_2. Now about the COBOL_
    Despite I choosed to install Microfocus, COBOL does not work. Sample COBOL processes such as PTPDBTST and PTPDTTST finished in error.
    The log is empty, here below the output from the file $PS_CFG_HOME/psft/pt/8.52/appserv/prcs/PRCSDOM/LOGS/stdout (psadm2) :
    =================================Error===============================
    Message:     Process 10899 is marked 'Initiated' or 'Processing' but can not detect status of PID
            Process Name: PTPDBTST
            Process Type: COBOL SQL
            Session Id:   9313
    =====================================================================
    OprId = VP1Note that I successfully tested AEs and SQRs.
    Here is the command line fired that I can see from the process monitor > parameter (nga is being my run control id) :
    PSRUN PTPDBTST ORACLE/F91TMPLT/VP1/OPRPSWD/nga/10899//0 I used the following trace setting on the PTPDBTST's process parameter (override) to see what happens :
    %%DBTYPE%%/%%DBNAME%%/%%OPRID%%/%%OPRPSWD%%/%%RUNCNTLID%%/%%INSTANCE%%//%%DBFLAG%%But it does not generate more logs...
    I also use "RCCBL Redirect =1" in psappsrv.cfg (reconfigure and restart appdom), then start the COBOL through menu PeopleTools > Utilities > Debug > PeopleTools Test Utilities, and run a "Remote Call Test".
    I received "COBOL Program PTPNTEST aborted (2,-1) FUNCLIB_UTIL.RC_TEST_PB.FieldChange PCPC:2143 Statement:26", but it generated two empty files (PTPNTEST_VP1_0913064910.out and PTPNTEST_VP1_0913064910.err).
    Next step, checking the folder $PS_HOME/cblbin, it is...er... empty... does this mean COBOL have not been compiled ? Hmmm, I'm pretty sure I replied 'yes' when it was prompted though (still have the screenshots)...
    And we can see several folders dated from today and license seems ok from Microfocus directories :
    [psadm1@psovmfscmfp2 tools]$ cd /opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
    [psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ ls -lrt
    total 264
    -r--r--r--  1 root root 10455 Nov 19  2009 ADISCTRL
    dr-xr-xr-x 10 root root  4096 Nov 19  2009 terminfo
    dr-xr-xr-x  2 root root  4096 Nov 19  2009 xdb
    -r--r--r--  1 root root 11949 Nov 19  2009 eslmf-mess
    dr-xr-xr-x  2 root root  4096 Nov 19  2009 include
    dr-xr-xr-x 17 root root  4096 Nov 19  2009 lang
    dr-xr-xr-x  4 root root  4096 Nov 19  2009 es
    dr-xr-xr-x  2 root root  4096 Nov 19  2009 dynload
    drwxrwxrwx  2 root root  4096 Nov 19  2009 deploy
    dr-xr-xr-x  2 root root  4096 Nov 19  2009 dynload64
    dr-xr-xr-x  2 root root  4096 Nov 19  2009 dialog
    dr-xr-xr-x  2 root root  4096 Nov 19  2009 cpylib
    dr-xr-xr-x  8 root root 28672 Nov 19  2009 lib
    dr-xr-xr-x  3 root root  4096 Nov 19  2009 snmp
    dr-xr-xr-x  8 root root  4096 Nov 19  2009 src
    dr-xr-xr-x 28 root root  4096 Nov 19  2009 demo
    dr-xr-xr-x  6 root root  4096 Nov 19  2009 docs
    -rw-r--r--  1 root root    49 Sep 13 05:13 license.txt
    -r-xr-xr-x  1 root root 12719 Sep 13 05:13 install.orig
    -r-xr-xr-x  1 root root 13006 Sep 13 05:13 install
    dr-xr-xr-x  6 root root  4096 Sep 13 05:13 lmf
    dr-xr-xr-x  2 root root  4096 Sep 13 05:13 aslmf
    dr-xr-xr-x  6 root root  4096 Sep 13 05:15 etc
    dr-xr-xr-x  4 root root 12288 Sep 13 05:15 bin
    [psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ more license.txt
    I
    ORACLE-30DAYDEV64
    01030 A0780 014A6 7980B A17CSo let's assume it has been properly installed and let's compile the COBOLs. Here we go :
    [psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ cd $PS_HOME/setup
    [psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
    Conversion Summary for Source Codes in  :
         Source: /opt/oracle/psft/pt/tools/src/cbl/
         Target: /opt/oracle/psft/pt/tools/src/cblunicode/
          Number of Copy Libraries Read: 71
                         Modified:       71
                     Not Modified:       0
          Number of Programs Read:       44
                         Modified:       44
                     Not Modified:       0
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak: line 249: cob: command not found
    cp: cannot stat `PTPCBLAE.gnt': No such file or directory
    cp: cannot stat `PTPCBLAE.int': No such file or directory
    cp: cannot stat `PTPCBLAE.lst': No such file or directory
    ...What about env. variables ? COBDIR, COBPATH and COBOL do not appears anywhere in PATH...
    [psadm1@psovmfscmfp2 setup]$ env|grep -i cobol
    [psadm1@psovmfscmfp2 setup]$Let's set the env variables as we could expect to be (page 27, step 17 of the given doc), and retry to compile the COBOL :
    [psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
    [psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
    [psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
    [psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
    Conversion Summary for Source Codes in  :
         Source: /opt/oracle/psft/pt/tools/src/cbl/
         Target: /opt/oracle/psft/pt/tools/src/cblunicode/
          Number of Copy Libraries Read: 71
                         Modified:       71
                     Not Modified:       0
          Number of Programs Read:       44
                         Modified:       44
                     Not Modified:       0
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
    Micro Focus LMF - 010: Unable to contact license manager.                                                                                                                              This product has been unable to contact the                                     License Manager.                                                                                                                                                Execution of this product has been terminated.                                                                                                                  This product cannot execute without the License                                 Manager. Contact your license administrator                                     or refer to the 'Information Messages' chapter                                  of the License Management Facility                                              Administrator's Guide.
    cob64: error(s) in compilation: PTPCBLAE.cbl
    cp: cannot stat `PTPCBLAE.gnt': No such file or directory
    cp: cannot stat `PTPCBLAE.int': No such file or directory
    cp: cannot stat `PTPCBLAE.lst': No such file or directory
    ...Ok, maybe a bit better, at least it is trying to contact LMF. Probably the LMF is not started. Let's try to start it :
    [root@psovmfscmfp2 microfocus]# ./mflmman
    MF-LMF:Thu Sep 13 07:19:37 2012: LMF Starting
    [root@psovmfscmfp2 microfocus]#Good, it is starting, it means it wasn't (sic). Now retry to compile :
    [psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
    [psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
    [psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
    [psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
    Conversion Summary for Source Codes in  :
         Source: /opt/oracle/psft/pt/tools/src/cbl/
         Target: /opt/oracle/psft/pt/tools/src/cblunicode/
          Number of Copy Libraries Read: 71
                         Modified:       71
                     Not Modified:       0
          Number of Programs Read:       44
                         Modified:       44
                     Not Modified:       0
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCURND.cbl ...
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPDBTST.cbl ...
    <snipped>
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPWLGEN.cbl ...
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL programs have been successfully compiled.
    /opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : The COBOL executables were copied to /opt/oracle/psft/pt/tools/cblbin
    rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLP1.cbl': Permission denied
    rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLUP.cbl': Permission deniedIt looks better, I think the last lines marked with "Permission denied" can be safely be ignored.
    Those files are owned by psadm3 with a read only for other users (sic). But more concern, I'm wondering why it looks into apptools (???) whereas I'm using psadm1 (tools only, COBPATH=/opt/oracle/psft/pt/tools/cblbin).
    Anyway, seems the *.gnt files required to run the COBOLs programs are now in bin :
    [psadm1@psovmfscmfp2 setup]$ ls /opt/oracle/psft/pt/tools/cblbin
    PTPCBLAE.gnt  PTPDTTST.gnt  PTPECOBL.gnt  PTPLOGMS.gnt  PTPRATES.gnt  PTPSQLGS.gnt  PTPTESTU.gnt  PTPTSCNT.gnt  PTPTSLOG.gnt  PTPTSTBL.gnt  PTPTSWHR.gnt
    PTPCURND.gnt  PTPDTWRK.gnt  PTPEFCNV.gnt  PTPMETAS.gnt  PTPRUNID.gnt  PTPSQLRT.gnt  PTPTESTV.gnt  PTPTSEDS.gnt  PTPTSREQ.gnt  PTPTSUPD.gnt  PTPUPPER.gnt
    PTPDBTST.gnt  PTPDYSQL.gnt  PTPERCUR.gnt  PTPNETRT.gnt  PTPSETAD.gnt  PTPSTRFN.gnt  PTPTFLDW.gnt  PTPTSEDT.gnt  PTPTSSET.gnt  PTPTSUSE.gnt  PTPUSTAT.gnt
    PTPDEC31.gnt  PTPECACH.gnt  PTPESLCT.gnt  PTPNTEST.gnt  PTPSHARE.gnt  PTPTEDIT.gnt  PTPTLREC.gnt  PTPTSFLD.gnt  PTPTSTAE.gnt  PTPTSWHE.gnt  PTPWLGEN.gnt
    [psadm1@psovmfscmfp2 setup]$Have a try to link COBOLs :
    [psadm1@psovmfscmfp2 setup]$ ./psrun.mak
    ./psrun.mak - linking PSRUN for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
    ./psrun.mak - Successfully created PSRUN in directory: /opt/oracle/psft/pt/tools/bin
    ./psrun.mak - linking PSRUNRMT for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
    ./psrun.mak - Successfully created PSRUNRMT in directory: /opt/oracle/psft/pt/tools/bin
    [psadm1@psovmfscmfp2 setup]$The err files are empty :
    -rw-r--r-- 1 psadm1 oracle     0 Sep 13 07:26 psrun.err
    -rw-r--r-- 1 psadm1 oracle     0 Sep 13 07:26 psrunrmt.errSo far, so good now. We are able to test again the sample COBOL... until next failure.
    Yes, unfortunately, it fails again. But good thing, the log is not empty now :
    PSRUN: error while loading shared libraries: libcobrts64.so: cannot open shared object file: No such file or directoryThat's probably coming from some missing libraries during the psprcs.cfg configuration. Let's use the same env. variables settings as for psadm1 when compiling COBOLs.
    [psadm2@psovmfscmfp2 appserv]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
    [psadm2@psovmfscmfp2 appserv]$ export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
    [psadm2@psovmfscmfp2 appserv]$ export PATH=$COBDIR/bin:$PATH
    [psadm2@psovmfscmfp2 appserv]$ ./psadminReconfigure, restart prcs and re-test... SUCCESSFULLY !!!!!!!!!!!!!!!!!!!!!!!!!
    Log from PTPDBTST process shows :
    SUCCESSFUL DATABASE CONNECTION
    SUCCESSFUL DATABASE DISCONNECTWhat a pain !
    I did not go further, but we could expect the same issue within the Application COBOLs, since the cblbin directory is also empty out there.
    According to psprcs.env, there're two values for COBDIR and the one for the applications cobol is empty :
    [psadm2@psovmfscmfp2 PRCSDOM]$ more psprcsrv.env
    INFORMIXSERVER=192.168.1.149
    COBPATH=/opt/oracle/psft/pt/apptools/cblbin:/opt/oracle/psft/pt/tools/cblbin
    PATH=/opt/oracle/psft/pt/apptools/bin:/opt/oracle/psft/pt/apptools/bin/interfacedrivers::/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:/opt/oracle/psft/pt/tools/appserv:/opt
    /oracle/psft/pt/tools/setup:/opt/oracle/psft/pt/tools/jre/bin:/opt/oracle/psft/pt/bea/tuxedo/bin:.:/opt/oracle/psft/pt/oracle-client/11.2.0.x/bin:/opt/oracle/psft/pt/oracle-clie
    nt/11.2.0.x/perl/bin:/usr/local/bin:/bin:/usr/bin:/opt/oracle/psft/pt/tools/bin:/opt/oracle/psft/pt/tools/bin/sqr/ORA/bin:/opt/oracle/psft/pt/tools/verity/linux/_ilnx21/bin:/hom
    e/psadm2/bin:.
    [psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/apptools/cblbin
    [psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/tools/cblbin
    PTPCBLAE.gnt  PTPDTTST.gnt  PTPECOBL.gnt  PTPLOGMS.gnt  PTPRATES.gnt  PTPSQLGS.gnt  PTPTESTU.gnt  PTPTSCNT.gnt  PTPTSLOG.gnt  PTPTSTBL.gnt  PTPTSWHR.gnt
    PTPCURND.gnt  PTPDTWRK.gnt  PTPEFCNV.gnt  PTPMETAS.gnt  PTPRUNID.gnt  PTPSQLRT.gnt  PTPTESTV.gnt  PTPTSEDS.gnt  PTPTSREQ.gnt  PTPTSUPD.gnt  PTPUPPER.gnt
    PTPDBTST.gnt  PTPDYSQL.gnt  PTPERCUR.gnt  PTPNETRT.gnt  PTPSETAD.gnt  PTPSTRFN.gnt  PTPTFLDW.gnt  PTPTSEDT.gnt  PTPTSSET.gnt  PTPTSUSE.gnt  PTPUSTAT.gnt
    PTPDEC31.gnt  PTPECACH.gnt  PTPESLCT.gnt  PTPNTEST.gnt  PTPSHARE.gnt  PTPTEDIT.gnt  PTPTLREC.gnt  PTPTSFLD.gnt  PTPTSTAE.gnt  PTPTSWHE.gnt  PTPWLGEN.gnt
    [psadm2@psovmfscmfp2 PRCSDOM]$The directory "/opt/oracle/psft/pt/apptools/cblbin" is owned by psadm3 and hosted on the database server (nfs mounted), so I assume we also need to set proper values for env variables, and compile the COBOLs before being able to use them.
    To resume what I did to make the COBOLs working on this PSOVM :
    1. As root, start LMF (this has to be done only once)
    cd /opt/oracle/psft/pt/cobol/microfocus
    ./mflmman
    2. As psadm1, set proper env. variable and compile (setting env variable has to be done each time you want to compile COBOLs)
    export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
    export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
    export PATH=$COBDIR/bin:$PATH
    cd $PS_HOME/setup
    ./pscbl.mak
    ./psrun.mak
    3. As psadm2, set proper env. variable and reconfigure psprcs.cfg, restart, restart (setting env variable has to be done each time you want to start the process scheduler, so probably better to append these in the .bash_profile)
    export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
    export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
    export PATH=$COBDIR/bin:$PATH
    cd $PS_HOME/appserv
    ./psadmin
    4. Same as step 2, but with user psadm3.
    HTH,
    Nicolas.
    PS: will it be the same issue on the HCM template delivered at the same time ? To be tested as well.
    PS2: and yes, I tested it twice before posting, result is same.
    Edited by: N Gasparotto on Sep 13, 2012 5:17 PM

    Fortunately, the COBOL issue does not exist on PSOVM HCM9.1 FP2 PT8.52.06 delivered in July 2012 (v3). COBOL are properly compiled (tools and app COBOLs), cblbin is not empty and they run successfully on the first shot.
    Nicolas.

  • How can I remove icons from the Finder sidebar?  Were transferred when I set up laptop from my desktop computer.  Tried dragging off but that didn't work.

    How can I remove icons from the Finder sidebar?  Transferred info from my Mac Pro desktop computer (using target mode) and there were folder icons on the Mac Pro Finder sidebar that are now on the MacBook Finder sidebar, even though these folders do not exist on the MacBook.  Tried to drag them off, which is the usual way to get rid of folders that the user adds to the sidebar (as opposed to those that can be added via the Customize Toolbar dropdown menu) but was unsuccessful.  I then unchecked all of the Customize Toolbar menu items and the folder icons still remained.  What else can I do?

    Did you hold the Command (Apple) key while dragging them off the sidebar? That usually makes them go *poof*.

  • Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

    Hello all,
    I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
    My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
    The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
    But in this case, when I run it, it shows the error that I have indicated in the subject line.
    If you need more details about my project to identify the problem, please let me know.
    Thanks in advance.
    Solved!
    Go to Solution.

    -Please go through pattern matching example which comes along with labview fiirst
    Go to labview Help>>Find Examples and you can search for example.
    -You have create template with angle range and what type of pattern matching you want use.
    -For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
    Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • What are the dependent SCs to be added to the Track, to develop NW CE BPM

    Hello Gurus:
    We are creating a track in a NW 70 SP17 system to be used for NW CE 7.1 Ehp1 SP03 applications, like Business Process
    Management applications (Process Composer, Rules Composer). While creating the track, I chose the track template to be "Composite Application 7.1 (with Business Process Management)". And I added the following 14 dependent SCs to the development SC I added to the track.
    CAF01_0.SCA
    CAFMF01_0.SCA
    ENGFACADE01_0.SCA
    ENGINEAPI01_0.SCA
    EPBASIS01_0.SCA
    EPBASISAPI01_0.SCA
    EPBUILDT01_0.SCA
    ESF01_0.SCA
    FRAMEWORK01_0.SCA
    GPCORE01_0.SCA
    MMRSERVER01_0.SCA
    SAPBUILDT01_0.SCA
    VCFRAMEWORK01_0.SCA
    WDRUNTIME01_0.SCA
    But when as a Developer when I try to create a DC of type Process Composer, that project type is dummied or disabled ???
    Other project types like Composite Application, Web Dynpro etc are enabled and working fine.
    Question:
    Is it enough to add corresponding dependent SCs related to Business Process Management ? If so what are those SCs ?
    (ii) If I need to choose another track template like " Business Process Management Application for NetWeaver 7.1" which is also available, then how could I have DC project of type Composite Application ?
    Appreciate your help,
    Prasad Nutalapati

    Satish:
    I am talking about creating DC projects of type 'Process Composer' for NW CE BPM applications, with in a track I created using a certain template I mentioned. How would that relate to NW Dev Studio ?
    To answer your point, when I try to create a local DC project of type 'Process Composer', yes I was able to, no problem. Because the NWDS is from the same CE Server installation files (7.1 Ehp 1 SP00).
    Thanks,
    -Prasad

  • Can't create Project from the Template or access project template

    Dear Experts,
    We are facing a issue while trying to access the project template/create the project from project template.
    we have 4 project template in place and of these two are working perfectly fine but
    From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
    Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
    And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
    Any Help Will be Highly Appreciated.
    Regards,
    Rakesh Daiya

    Dear Experts,
    We were able to find out the issue,
    We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
    When we changed the type to "Template and Document" from "Document Only" and  system started allowing us to create projects from the template.
    Can anyone please help me with one query,
    Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
    Does this really be a reason behind projects are not getting created from template?
    Any help will be appreciated
    Regards,
    Rakesh Daiya

  • Using dotx files opens the template file instead of instantiating a new docx file

    When I save Word documents as templates (dotx) in a SharePoint document library I noticed that they always open up as the template file (dotx) and not as a new Word document (docx). I expect that this happens because SharePoint simply opens up
    the document "as-is" - disregarding the logic which would normally create a docx document in offline mode. But strangely this works fine when opening the file in explorer view.
    Does anyone know if it is possible to use dotx files as intended in SharePoint? Was this behavior introduced when SharePoint 2007 was launched or was it perhaps included with a CU or SP?

    You can create a central hub containing content types (called the Content Type Hub).  Timer jobs run throughout the day to copy content types from the Hub to other site collections. Once the content types have been replicated to your site collection
    you would change your library settings to allow management of Content Types (Advanced in Library Settings).  Now you can select "Add from Existing content types" (Library settings) and add the content types to your library.  When you are
    done you can train your users to create new documents from your standard templates by selecting the content type by clicking the tiny triangle under the New Document button.
    Reference
    About Content Types:
    https://support.office.com/en-us/article/Introduction-to-content-types-and-content-type-publishing-e1277a2e-a1e8-4473-9126-91a0647766e5
    I did this on an Intranet I setup. When I created a new Project Site (not on Project Server), I added the content types to the document library (e.g. Charter, Plan, Status Reports, Project Document). I then took an additional step and I deleted the default
    "Document" content type. and moved "Project Document" to the  top of the list.  I then set the column "project name" (which I added to the project document content type) default value to the name of the project.  This
    way when people upload new docs to the library they are "Project Documents" and the Project Name column is populated with the name of the project by default.  - I hope this is helpful - Greg
    Gregory Frick

  • Why do links in the template change location to 'file:///'...on the pages created from the template?

    Im not sure what I am doing wrong but I am building a portfolio site from a template that I downloaded online.
    The site is working and I am slowly converting it from the template content to the content that I want.
    As I will be editing the site and adding more pages I decided to try and add the Header, footer and main navigation bar as a template with another gallery container and navigation as an option on the template.
    I thought that it was working fine untill I noticed that the links on the pages created using the template are showing as follows,
    instead of the links that were in the template that show as,
    Is this something that will change when I upload the site with the template or have I done something wrong making the links?

    Usually this happens when you don't use a proper Site Definition, or if you have files outside your defined site folder.
    Have you defined your site properly?
    http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/

  • How do I modify the template used in the Photo Gallery module

    I notice the Photo Galleries are rendered as an HTML table and I would like to make a small modification to the way the gallery is rendered on the page.
    Basically I just want to wrap a DIV around the <img> tag so I can control the look of the image via my own CSS.
    I see there is the ability to modify Module Templates, but the photo gallery module is not listed there.
    Where can I access the template used for a photo gallery?
    Alternatively I will need to display the images myself using an XML feed and jQuery, but I would rather use BC's own modules when I can.

    Hi David,
    There is no template for the photo Galleries. But if you are using Firebug you can find out the css values and add your own modification by adding CSS by the same selector as the current gallery to your own page and use the !Important value to over write the gallery css.

Maybe you are looking for