Adding transition or effect distorts sound......

Hello all,
I've tried everything I can think of and I can't seem to add any transitions or effects (video or audio) without the audio becoming the snow/static video sound. The video I'm working on is from a DVD ripped and exported in toast to DV files and then imported into iMovie. The sound sounds fine until I add anything on top of the video track. I've tried to extract the audio with no success, unless I'm not doing it correctly.
Any suggestions would be appreciated.
Thanks
Dave
Intel iMac Core Dou/1GIG Mac OS X (10.4.8)

I don't know if this will help but if you don't want any sound maybe try right clicking on the video track and click on something towards the bottom that says track volume or sound and finally drag the sound all the way down.

Similar Messages

How can I add transition or effect sound?

Hi,
I know how to make a sound effect on a slide, but it is for the whole slide.
How can I add a transition or effect sould only during the transition period when I click my mouse?
Powerpoint can do it easily, can you send the answer to my email please?
Like (0

just think about the voice setting when you go to the record you should find mono and stereo. I have only mic volume -cd volume and line volume i should have mono mixer and stereo mixer also.
So can i add them to the list ?? For example when you use paltalk program you can play music from your computer in the room so all in this room can hear it eaven if you adjust your volume to mute,this is using mixer mono or stereo.
I hope i explane it for you. Thanx

Final Cut Pro X crashes when adding transitions, throughout the entire program.

I've had FCP X installed for a few weeks now, and I decided to hold back asking my question and see if anybody else is experiencing the same problems.
I did find one matching problem on the discussions forum, but the user found a solution which I tried, and did it did not work.
Everytime I try to add a very simple transition to my video in Final Cut Pro X, it gives me the spinning colorwheel, hesitates for a few seconds and then crashes.
It only does it with transitions, I can add effects, adjust color, etc. but only when adding transitions does it crash.
I've tried deleting events and original media, I've reimported using optimized media, I've tried both ways of keeping files in original locations and also copying to final cut events folder.
The video I'm using is full 1080p mov files from a Canon 5D Mark II.
It does it in the timeline as well as the secondary timeline.
I've tried the solution that the previous asker did, which was copying the content to another FCP event, and it didn't work for me. Still crashes whether I try to drag the transition to my timeline, use the keyboard shortcut, or double click.
I have a Early 2010 15 inch MBP i5 with 8gb of RAM running newest version of Snow Leopard.
Hope I've provided enough information
Thanks,
-Jon

Same Issue: Added a transition and then beach ball from **** and crash. Also lost two hours of work when it restarted and reverted to the last planned quit.
FCPX is benched until Lion and updates. Don't have time to be a beta tester on what might end up being a hobbyists toy.
MacPro Quad 3.0, 10G RAM.
Mark

NB520-108: Distorted sound on full screen video

Hi there,
I have a harman / kardon nb520-108 (I hope i have the right forum!) and when I maximise the screen on say youtube or iplayer I get a distorted sound.
I have read somewhere that the bios needs an update but i'd need confirmation of that if it is as the secondary effect is that it means an install of the sound system.
Any ideas what this could be?
thanks in advance,
alex

The Toshiba software that came pre-installed should warn you if you have all your drivers up-to-date. In any case, you should always update them. Also make sure Windows Updates hasn't installed a different sound driver for you, if it did, just uninstall that one and install the one provided by Toshiba.
If that doesn't solve it, tell me what browser you are using and what version of Flash you have currently installed. Update both.

My volume button became sound effects, no sound at all

Can anyone help me with my ipad2, my button volume became Sound Effects label, and my iPad has no sound at all.

Hello Skeetercove,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot the issue of having no audio output from your iPad's speakers. Please note that even though the steps state it's for iPhone, the same applies to your iPad.
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

Saving Transitions and Effects as favorites in PPro CS 6

I am working with Premiere Pro CS 6
I have added transition and changed it parameters a little bit. I want to save this as a favorite so I can use it again and again without having to change the parameters every time.
How can I do this? Can I also do it for filters as well?
Thanks in advance

You can't manipulate the preset transitions and save that manipulation as far as I know. This is how you do it. - You take a clip and either put a filter on it (lens flare for instance) or manually build the effect you want on it (opacity for a fade in for instance). Then you select/highlight that effect title in the Effects Controls panel - click on the panel menu icon to the upper right of the Effect Controls panel - choose preset - name it - save it.

Pictures "snap" after adding transitions

I'm very frustrated with IDVD. In every movie I make there are a few pictures that, after adding the transition they "flash", it happens usually at the begining of the movie, but not necessarily. It is a random flaw and it comes with a sound that is similar to the sound we hear when the monitor goes to sleep.
I've tried deleting, clearing the transition and the picture, but whatever stays in its place acquires the same defect. I don't know what else to do, I've tried everything. If someone knows what I should do, please write back, I have loads of clips to make, but I won't until I know how to fix this.
I've read similar complaints but with video after adding transitions, but mine only happens with pictures.
thank you,
Paula

Hello, Paula,
I noticed that you posted to the iDVD discussions, but your problem sounds as if it occurs with your iMovie, not iDVD.
Having a 'flash' with certain transitions has been noted in iMovie postings before. I have had that happen on occasion. The solution for many of us has been to delete the offending transition, and then play the end of the clip preceding the removed transition. You have to play it frame-by-frame, and you may see one frame of all white. Delete this one frame, redo the transition and you should be ok.
If the video is ok, but there is still a pop/snap/buzz noise, that is also a known problem and has occurred since iMovie 4. This 'popping' noise usually occurs between a silent photo and a video clip.There is no good solution yet, but if you zoom out the timeline until you see the cross-shape of the transition, you can select 'Show volume levels' and manually adjust the volume of the transition. Sometimes I have just lowered and then raised back the volume level bar and the noise has markedly reduced.
Hope this is helpful to you!

IPod Classic 6th Gen - Distorted sound :-(

Hey folks, my friends iPod Classic 80gb 6th Generation iPod has a crappy distorted sound when tunes are played from it.
He sent it away to get fixed thinking it would be the headphone jack that was the problem - they got back to him and said that it was the Logic board at fault, and charged over £79.99 +VAT for this repair.
When it came back, all seemed to work okay, except a very short battery life.
A week later, the iPod froze with no backlight (the menu was still visible but not reacting to any button presses)
Nothing happened when the charger was plugged in, so we held the Menu Button + the Select button, and it rebooted successfully however the orginal problem came back of distorted sound....:-(
Very unhappy as £79.99 was a lot to pay for it be broken again so soon.
Can anyone shed any light onto why this may of happened?
Was he right by saying it was the logic board at fault?
Cheers
James

I haD the same issue, and was thoroughly ticked off until doing some research and then trying couple things.
I was able to change the volume limit, that WAS set at half. I adjusted it to max volume, set a lock passcode, and away I drove.
Then, upon hitting "play", I began to get a little ticked off. I realized after a few minutes, I couldn't hear anything playing.
It was so quiet- and I-95 is noisy, with me regretting buying another Apple product, after is wrote not to.
So- after reading through a couple of these threads, I just adjusted the volume limit, and VOILA!
It reverted to 50%.
So, I did a total wipe, factory-reset it as new iPod. I checked setting=>volume limit and it was at the 50% point again. First thing that I did was go to the last selection under settings menu, "reset settings" and noted it doesn't delete sync days, solely sys settings.
I adjusted the volume limit to 100% immediately afterwards, set a new passcode and then.....
Hit play.
It worked. Plays just as loud as my original 3rd Gen iTouch.
So Dylan1219, maybe try that? It's so simple, I am shocked that's how I fixed it. It had been set- and always snapped back to the 50% mark.
So, MAYBE that could solve the problem..? I have hearing loss from rock & roll and concerts, etc...so, thankfully this isn't a bunk product. Just had a bunk setting.
It has stayed at Max level for hours now, and can state it solved it for me.
I would hypothesize, all iPod classics are made the same, except for the "options" of storage and color. Maybe a small "governor" or a piece of extra firmware is added after the fact, or only "every 9th iPod" who knows for sure...?

Flashing after adding transitions

Has anyone experienced flashing after adding transitions especially using cross fades. It does not matter what length the effect is. It is frustrating and unacceptable. I have not received one answer in the past. Ever since I added ILife 06 this is is started. Maybe I should get rid of the Ilife update?

I have had the same thing happen. I dont know why but I have solved it two ways - save, quit and reopen. If that doesnt work delete the transition and replace it.
15 MBP, 17 iMac, iBook 14, PM7600 G3266, IIvx Mac OS X (10.4.7)

Volume button says sound effects, no sound.

I Can not get the sound to come through on my ipad. It works with head phones. It was working a few days ago. My volume buttons say sound effects. It used to say volume?

Hello Skeetercove,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot the issue of having no audio output from your iPad's speakers. Please note that even though the steps state it's for iPhone, the same applies to your iPad.
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

Distorted sounds in Windows 7 32 bit

Hi...
I re-installed my system with (Dutch) Windows 7 32 bit and used the "Vista" driver CD for my SB X-fi Music card.
When I play MP3 or WAV files, the quality is reasonable, however, some sounds, specially vocals, are damped by the bass-tones.
When I play a CD in my Plextor 80SA dvd drive, I get a very distorted sound.
Doesn't matter if it is a burned CD or a original CD from the music store.
I think that the output from my DVD dri've is to high, but I don't know where I can change the output level.
Also tried the latest updated drivers for the X-fi card, but that has no change in the sounds, cd's are still distorted and basstones in MP3 and WAV damp the vocals and other instruments.
Don't know what to do...please, someone with advise?
Grtz.
Zipper04
Johan Lemmers

Using earphones, the same thing happens, the bass tones dampen other sounds.
I tested the speakers with the Creative Diagnostics application and there seems to be nothing wrong with them, even when I pump up the volume to 80 or 90% of the max volume there is no distortion at all in the speaker system.
I have ripped a CD and played the saved MP3 or WAV?files, they do the same as downloaded MP3 WAV files, bass tones dampen the other sounds. Sometimes the first two or three songs played, are all fine but then it slowly starts to happen... In other occasions, it happens immedaitely.
I have two identical dvd drives in my system (running on Windows 7 Ultimate) and used the second (hardly used) spare drive, also a Plextor 80SA, to play a legal bought CD and this one gives distorted sounds too! Volume doen't matter, by the way, distortion is also present on low volumes.
I must add to this that, when I was running Windows XP Professional with SP3 on my system, none of the above happened... It all started after re-installing my system with Windows 7 Ultimate.
Grtz.
Johan Lemmers.
the Netherlands

TS5249 After reverting back to Garageband 6.0, I find that I still lack all the Garageband Effects (Distortion, Vocal Transformer, etc.). The Garageband 10 "AU" plug ins are there instead. I need help getting the old effects back.

After reverting back to Garageband 6.0, I find that I still lack all the Garageband Effects (Distortion, Vocal Transformer, etc.). The Garageband 10 "AU" plug ins are there instead.
For background: I lost my v6 because I had to reformat my whole hard drive. When I reformatted I lost GB and everything else I had. I downloaded GB (unaware of the awfulness that is v10) from the App Store. The fact that v10 does not have all my favorite and most used effects from v6, I uninstalled v10 and redownloaded v6 from my App Store Purchases. I load up v6 only to find that all the default effects are there for each instrument, but when I go to add an effect (i.e. Distortion, Vocal Transformer, Flanger, etc.), instead of the list of classic effects, there's the list of awful AU effects from v10. What gives?!

I don’t have this issue, but I am looking to learn about which parts of the old GarageBand can safely migrate to the new GarageBand 10.
(Personally, I like most of what changed in the new version. I sorely miss a few features, and I submitted some detailed feedback. If you think similarly—or if you hate the new version like babygotbackup—do the GarageBand community a favor, and send in your own feedback! From the menu, select GarageBand ▶︎ Provide GarageBand Feedback.)

Distorted sound on iMac with Windows 7

Hi,
I've just upgraded from Windows Vista Ultimate to Windows 7 Home Premium.
Before the sound worked perfect, but now it is very distorted.
When I mute windows I can still hear sound - it is just a bit more distorted and at a bit lower volume.
I tried to upgrade the sound card driver from Realtek, but lost sound completely. I reinstalled the Apple driver and now I have distorted sound again.
I'm running Boot Camp 3.1 drivers.
Does any one know how to solve this problem?
/Tejs

Can you find out which drivers you currently have for me please.
go to Start >> right click Computer >> System Properties >> System >> Device Manager
Now open up the sound, video and game controllers section and there should be something correlating to your sound driver here, if you could give me the name or the driver name if possible.
also what iMac model are you running.

Apple TV distorted sound for 1 to 2 minuntes

RE: Apple TV
Wondering if anyone gets distorted sound for 1 to 2 minuntes, then it completely goes away? If happens randomly 45 mins or an hour and a half into a movie. Doesn't matter which app ...... Hulu Plus, NetFlix, movie rental, running video from home share etc etc.
Thanks
Scott

Hi Hamid118,
Thanks for visiting Apple Support Communities.
If your Apple TV does not start up and the status light is flashing quickly, these steps can help:
Apple TV: About the status light
http://support.apple.com/kb/ht4380
Flashes quickly
Having issues. Try restarting or waking your Apple TV. If your Apple TV does not start up properly, you might need to reset the Apple TV or restore it to factory settings. See Apple TV (2nd and 3rd generation): Restoring your Apple TV. If this does not resolve the issue, refer to the Service FAQ for additional assistance.
All the best,
Jeremy

[TV@Master] Distorted sound despite clean install of XPPro

Hi, an old problem popped up, reinstalled my MEGA651 installed the latest drivers for my 8086 card and MSIPVS. just like when the early betas were out i had distorted sound, but that was corrected with a later beta, now i have it with the official version. all settings are as low as possible but it does not help. recorded video just "screams". anyone had this problem? how can i fix it?

yeah i know what you are going thru i've got the same problem,
i use my pc to record tv-shows and watcht them on my tv
but because it's so quit i've got to turn the volume high,
so if i forget that and watch tv its very loud
anybody got an idea how to boost the volume ?

Adding transition or effect distorts sound......

Similar Messages

Maybe you are looking for