Adding Views/Folders thru command line

Hi --
I am just wondering whether i can add views and create folders on those views from command line for a business area.
Any ideas?
Thanks
Anil Chada

Have you checked the Java Command line utility. It has lot of administration commands.
regards
http://www.infocaptor.com <--- Create your own intelligence

Similar Messages

Web Application Status thru Command Line!

Hi,
How do i find the status of web application thru command line?
I dont find a direct and easy way to get to know the status of a web application. In websphere it was straight forward. Any help from BEA team would be really appreciated
Regards,
C R baradwaj

Hi Satya Ghattu,
We have a requirement wherein we wanted to manage the start and stop of web application without using the weblogic server console.
If I stop the web application from the console it shows the web application status as unavailable. I want to retrieve the status of the web application that is shown in the console from a command line utility or thru a java program.
Any sample program or a command line utility will be very very helpful.
Waiting for your earlier response. I understand from other source of information that WLST is the way to go. If I can get some source code for the same will be REALLY appreciated.
Many Thanks in Advance,
C R Baradwaj

ERR file produced thru command line compile

I'm trying to compile Oracle6 and Oracle9i forms thru the command line. Fmx files are created but so are err files. Upon inspection of the err files, it just states that there are no compilation errors. So this means that the fmx files are created correctly.
Is there a way for the Oracle6 form compiler (ifcmp60.exe) and the Oracle9i form compiler (ifcmp90.exe) to suppress the creation of err files if there are no compilation errors ?
thanks.

No they will always be created. To check if there is a error with the compile you should check the DOS %ERRORLEVEL% value and if that indicates a non zero value then look at the .err file.

Passing user defined parameters in oracle reports thru command line

Hi All
We are currently using Reports 6i with Oracle 10g 10.2.0.4.0
I would like to know that is it possible to pass user defined parameters values while calling report from command line.
For Example: I am using following coding to call report from command line.
for /f "tokens=1-3 delims=/ " %%a in ('date /t mm/dd/yyyy -1') do (
set mm=%%b
set dd=%%a
set yyyy=%%c)
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%.pdf desformat=PDF BACKGROUND=NO BATCH=YES
The report contains some user defined parameter which is using in where condition of reqport query.
Select * from banks
where id = :Bank_ID
Now I want to Pass value for :Bank_Id from command line (like we pass parameter list while calling report with run_product), how it is possible?
Thanks
Hassan

Hi guys
Fortunately I am able to perform the required task as I just added the report parameter field as follows:
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%%h%%mi%%ss%%ts%.pdf desformat=PDF BACKGROUND=NO BATCH=YES ERRFILE=c:\reports\error.log LOGFILE=c:\reports\joblog.log bank_id='MCB'
bank_id is the report parameter using in where clause.
Regards,
Hassan

Schedule workbooks thru command line

hi,
how do we schedule workbooks thru unix command line?
Thanks

Hi,
Well you can use windows task manager or another third party scheduler to run Discoverer exports on a windows workstation. You can search this site for information on how to do this.
You can then use a unix command to send the details of the workbook to the workstation. One way to do this would be for the script running on the windows workstation to obtain the list of workbooks, worksheets, parameters etc that need to be scheduled from a custom database table. A unix command could then be used to add rows to the table which the workstation would then read and run the exports.
How you do this depends on what output you want to generate and how you want to deliver that output to the users. You can find an article on my web site (www.cabotconsulting.co.uk) that describes how to schedule Discoverer reports using the Applications concurrent manager. This method also uses a custom table to hold the reports to be scheduled.
Rod West

MS Access to oracle 10g Migration thru command line/script?

Hi,
Is there a command line for executing OWMB?..One of the customers currently using multiple databases of Access DB are interested in migrating to Oracle but they want the migration process to be very simple...For ex: On the click of a button or if there is something like silent mode migration through some command..
Any help is greatly appreciated.
Thanks,
Veena

Hi Veena,
There's no command line or silent mode migration facility to run the workbench.
However, the workbench does that have capability of migrating multiple MDB files in the one operation. Using the Exporter Tool for MS Access, which is shipped as part of the OMWB install, the user can select multiple MDB files to export. For each exported MDB file, an associated XML file is generated by the Exporter tool, which contains the database schema information for the MS Access database. The user can then load up all of these XML files, via a wizard, into the workbench, and carry out their migration. The ability to export & migrate multiple database in the one operation should greatly reduce the customer's migration time.
I hope this helps.
Regards,
Hilary

Deploy an EAR file thru command line?

I have been able to deploy the Petstore.ear file from
the 10G AS Deploy EAR file option in the Server admin console.
Now how do I to run this ear via the command line ?
Any suggestions please?

In ias9041 enterprise, I do
$IAS_HOME/dcm/bin/dcmctl deployapplication -a myapp -f /root/myapp.ear -co home
$IAS_HOME/dcm/bin/dcmctl redeployapplication -a myapp -f /root/myapp.ear -co home
$IAS_HOME/dcm/bin/dcmctl undeployapplication -a myapp -co home
I don't use the OEM at all. I do everything in command line with dcmctl and opmnctl. Read oracle's doc for more info.
Ken

Adding rights to forms programmically or thru command line

We have the reader extension 7.0 and it comes with the web interface to add rights one file at a time. I checked the API and still not sure where to start. If somebody can shed more light I'll appreciate it. Also do I need other components to develop API.. we host our reader extension in Solaris 10. Many thanks.

You can use the Java API to do it. See the developer_guide.pdf and api_reference.pdf that comes with the product.
Chris
Adobe Enterprise Developer Support

Executing system command thru command line by passing it to a server

Hello,
I would like to know if there is any way by which I can call a system command through a java program . This system command takes parameters. If yes then how do i pass these paramaeters. This program will be called thru a sheel scripts and the parameters may vary...

If I just look at the question in your post, I would say the answer is to call Runtime.getRuntime().exec("the system command"). But the title of the post mentioned passing it to a server; I won't attempt to answer that without knowing what it's all about.

Registering sunone5.2 instance on dscc7 console thru command line

Hi,
We migrated our existing sunone 5.2 server to new ODSEE11g servers,
I was successfully able to register all the 11g -Instances in DSCC using the "./dsccreg add-server" command, the reason I used ./dsccreg command was because some how our console wasn't able to take the credential for registering,
Is there any way/command (apart from console) by which I can register my 5.2 Instance on DSCC, we have set up the replication, apart from 5.2-Instance all other 11g Instances are registered under DSCC.
Thanks,
Kiran.

I don't believe it's possible to fully register 5.2 on DSCC because DSCC relies heavily on Cacao to communicate from the DSCC to the DS & DS 5.2 does not have support for Cacao.
The best I've seen it do is to show the 5.2 server in the console when you have a replication agreement, but I haven't been able to get it to register due to Cacao not being installed.
Also we are in the same boat as you with having 5.2 & 11g running simultaneously. I'm curious if you could share any or your setup.
So far I've been able to get 11g & 5.2 replicating (multi-master) to each other both ways. Things seem to be working fine, but I have thus far not been able to work out a way to get "passwordretrycount" to replicate. I'm currently looking at writing a script to do this, but haven't decided on the best way to do it.
Are there any issues you have run across? or anything you've been able to tackle that you can share?

Changing security option of admin server thru command line

Dear All,
As you can understand , we have accidently turned on SSL security =on on the admin server and we need help to turn it off through command. I will really appreciate if someone can help on this....

Hi All,
Thanks for your replies. I have managed to start the server without token. Now whenever I click or try to configure through GUI e.. "Secuirty: Request new certificate" or "Edit listen socket from preferences" . I am getting HTTP: 500 error.
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the vus304:8888 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
And on ERROR log files says
[15/Aug/2005:14:57:19] failure (14809): for host xxxx trying to GET /https-admserv/bin/security, cgi_scan_headers reports: the CGI program /opt/iplanet/servers/bin/https/admin/bin/security did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
[15/Aug/2005:15:11:03] failure (14809): Internal error: Unexpected error condition thrown (java.lang.StackOverflowError,no description), stack: java.lang.StackOverflowError
Thanks in Advance
Regards

Starting the nzrView in listen mode from the command line...

I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?

Originally Posted by mcdonalj
I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?
There has been some updates in the documentation for 10.2.2 about remote control from cmd line.
Check it out, maybe there is a solution to your problem.
http://www.novell.com/documentation/...a/bcfqcen.html
http://www.novell.com/documentation/...a/bn8ptx7.html
Thomas

How to Install IHAT10.1.3 for both command line and web

Hi,
I am trying to install iHAT10.1.3 onto my linux x86 machine. However the instruction I am following in the README is not working for me. Can anyone give me an example of how to install and view iHat for command line and the web
Cheers
Jat

What stage during the instructions are you encountering problems. Can you provide the error details if any?
The 10.1.3 iHAT is only Web based using Flash at the client for displaying compopnents. Unlike the old iHAT, there is not thick client provided to invoke from the command line.
null

BlueJ command line problem

Hi i am new to java practicing since 3 weeks now. i am using blueJ iam liking it but the problem i am facing is i can't pass command line parametres to String args through BlueJ .After right clicking on Main program (in Insert Sort) it asks for arguments when i pass the arguments that is
4 3 2 0 1 it says :- "}" expected or ";" expected and same program if i run thru command line passing parametres it works fine. The thing is i want to use debug features of Bluej which i can't using command prompt
please help me out

thanks for your quick response.
i am new to this stuff. are u telling me that
java VectorTest one two
will return as 0 even though there are 2
arguments for the args array.
if so what do i do.create a new class to accept the
arguments and add them to the vector?
No, if you put the command line as you describe, you should get args.length = 2, as you would expect.
BTW - the reason your square brackets are disappearing is because the forum uses square brackets for special formatting - which is a real pain. I think the following should work:
String nString = args;
[ / code]
But it doesn't exactly - the square brackets end up as angle brackets, as you can see - anyone help, please? Also, at the end of the code section, there shouldn't be spaces around the / - I just put them in to stop it acting like a real end of code section.
Also, notice that there's no need to putnString = new String(args);
you can use args directly.
Robin

How can "multiple folders/files" be deleted in ONE PSEXEC COMMAND LINE

I can delete remote folders/files via bat command with psexec (below) but;
It takes a little time because of the 9 different folders. Maybe, looping of txt file can be used for different folders.
So how we can delete multiple folders in ONE PSEXEC COMMAND LINE?
Here my working code but it does its job in 9 steps :(
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\1*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\2*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\3*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\4*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\5*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\6*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\7*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\8*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\9*.*") do rd /s /q "%%a""
\_(ツ)_/ twitter.com/serdaruzun

I think it is:psexec \\%PC% cmd /c "for /l %%n in (1;1;9) do for /d %%a in ("c:\Users\%%n*.*") do rd /s /q "%%a""
\_(ツ)_/ twitter.com/serdaruzun

Adding Views/Folders thru command line

Similar Messages

Maybe you are looking for