Adding vimeo to sharing group

How do I add vimeo as a favorite to upload to in the sharing groups on the dock?  Are my only choices youtube, flicker, picaasa and facebook?  I'd rather use vimeo.
Thanks.

What is the model number of the docking system? It is required to know the model number of the unit so that we can check the different apps supported by the system.

Similar Messages

  • How do you add an iTunes Gift Card so that all purchases of any members of a Family Sharing Group can use the credit?

    How can all family members of a Family Sharing Group use a gift card that has been been applied to the iTunes master account? I added a gift card to our master iTunes account for my grandson, and even though he's a family sharing group member, none of the purchases I have approved from his requests have used the gift card credit. A search of the iTunes support site failed to turn up anything that even remotely addresses this topic. It would seem reasonable to assume that any purchase made by any family member should be able to use the gift card credit since all purchases go through the master account, but this does not appear to be the case.

    Regarding your statement about the gift card balance being used if redeemed to the organizers account - http://www.apple.com/feedback.
    Regarding redeeming the gift card to the child's account, it is the same as redeeming to yours.  You have to be signed in to the iTunes store using the child's apple ID, then redeem the gift card there.  If you already redeemed the card on your ID, you won't be able to redeem it again.
    Redeem and use iTunes Gift Cards and content codes - Apple Support

  • Do all the people in family sharing group have to have same last name?

    do all the people in family sharing group have to have same last name?

    Hi ant_barry,
    Happy New Year!  The Family Sharing program does not require members of the family to share the same name.  Here is some general information for you:
    OS X Yosemite: What is Family Sharing?
    http://support.apple.com/kb/PH19007
    Family Sharing lets up to six members of your family share their iTunes Store, App Store, and iBooks Store purchases, a family calendar, family reminders list, and family photos, all without sharing accounts.
    One adult—the family organizer—sets up Family Sharing, invites up to five people to join the family group, and agrees to pay for any iTunes Store, App Store, and iBooks Store purchases those family members initiate while part of the family group. Once set up, family members get immediate access to each other’s music, movies, TV shows, books, and eligible apps. In addition, family members can easily share photos in a shared family album, add events to a family calendar, share their location with other family members, and even help locate another family member’s missing device.
    Each family member needs to have an Apple ID he or she uses for iCloud. For a child too young to create his or her own Apple ID, the family organizer can provide parental consent for a child to have his or her own Apple ID and create it on the child’s behalf while adding the child to the family.
    To join a family, you must sign in to iCloud with your Apple ID. You will also be asked to confirm the Apple ID you use for the iTunes Store, App Store, and iBooks Store. You can be part of only one family group at a time, and you can switch families at most once per year.
    Family Sharing is available on iOS devices with iOS 8 or later, Mac computers with OS X Yosemite (v10.10) or later, and Windows computers with iCloud for Windows 4.0 or later.
    Join a family
    Set up Family Sharing
    Last Modified: Nov 19, 2014
    Cheers!
    - Judy

  • I'm part of a family sharing group. How do I use my iTunes balance to purchase apps?

    I'm part of a family sharing group, but I have a balance on my iTunes account. How do I use that balance to pay for apps, instead of using the organizers shared payment method?

    808LakerFan wrote:
    I'm part of a family sharing group, but I have a balance on my iTunes account. How do I use that balance to pay for apps, instead of using the organizers shared payment method?
    Laker Fan,
    It should be doing it that way.  See below for the official Apple description.  If it is not working as stated, contact iTunes Customer Service.
    Family purchases and payments
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

  • Can one apple ID belong to multiple family sharing groups?

    I'm interested in starting a family sharing group with my siblings (surprise).  They have children of their own, however, so if I invite them to my new group, will they also be able to create a different group for themselves with their children?
    My thought is that my siblings can more easily share information and photos.  I wasn't interested in approving app purchases for their children however so I thought they could create a separate group with their same parent ID for themselves with their children.  If I'm thinking of this right, and ID needs the capability of belonging to multiple groups.  Is that possible?
    Thanks kindly.
    Bill

    Hi Mdbarnharts, 
    Thanks for visiting Apple Support Communities. 
    It sounds like your family members are using the same Apple ID to share purchases, and now you're receiving messages sent and received by your kids. 
    You can set up and manage Apple IDs for your children through the Family Sharing feature. 
    You can find more information about Family Sharing and setting up an Apple ID for your kids at these resources:
    Start or join a family group using Family Sharing - Apple Support
    Family Sharing and Apple IDs for kids - Apple Support
    All the best,
    Jeremy 

  • My wife's Apple ID is shown as belonging to a family sharing group, but we can't determine what is the id of the owner.  How can she remove herself from the group?

    my wife's apple ID is shown as belonging to another family sharing group. We can' t figure out the  Apple ID of the 'owner' of the group.  Is there any way to remove oneself from a family sharing group when you are not the owner?  Or how can we find the log in id (Apple ID) of the owner?

    i partially solved the problem, however still need some help.  My wife has made purchases under two different Apple ids.  I tried t re-set her iPad with her main ID but it is apparently part of a family.  I re-set  her iPad iCloud using her secondary ID.  The sharing of iTunes shows her main apple ID.  The settings iTunes is also set to her main Apple id.  I sent an invite from her iPad icloud family sharing to her main Apple ID, but when I attempted to consent to join it says she is already a member.  So I am guessing this is because in the family set up under her secondary ID that her main id is the iTunes account that is shared.  My question is could I change the iTunes shared under her name as owner to her secondary account, then invite her main account to join as a distinct member?  I am nervous about doing this for two reasons 1.  There is a warning when changing the shared iTunes account that says you can't join another group for 90 days. 2. I may still get the message that her main account is still a member of the group even though it doesn't show up, and then not able to revert back.
    if you follow this can someone offer some help,
    thanks
    note. This whole problem when we had to change a Apple id when we changed Internet service providers.

  • Sharing contacts using AirDrop, both users are members of the same Family Sharing group.

    I'm asking this question for a friend of mine. He contacted me to help troubleshoot a problem where he was trying to share a contact with his wife using AirDrop. They both have new iPhone 5Ss running iOS 8.1. He can send a contact to his wife's iPhone but she can't send to him. While troubleshooting we noticed we could change the behavoir by changing the settings of who was a Parent/GardIan and who was an Adult in Family Sharing. For example we could change the behaviour so that she could share a contact with him but he could not share with her. We were never able to get it to work where they could share with each other both ways. It was one way only.
    Anyone else who is part of a Family Sharing group having trouble using AirDrop to share between iPhones, particularly contacts?

    Hi,
    The way to do this would be to first have a Lookup on the dimension based on the properties you want. You can then use this retrieved value in the REC statement.
    This is an example for it:
    *DIM CATEGORY=CATEGORY
    *DIM TIME=TIME
    *LOOKUP RATE
    *DIM ENTITY2="DEFAULT"
    *DIM RATE=ACCOUNT.RATETYPE
    *DIM SOURCECURR:INPUTCURRENCY=ENTITY.CURR
    *DIM DESTCURR1: INPUTCURRENCY="USD"
    *DIM DESTCURR2: INPUTCURRENCY="EURO"
    *ENDLOOKUP
    *WHEN ACCOUNT.RATETYPE
    *IS "AVG","END"
    *REC(FACTOR=LOOKUP(DESTCURR1)/LOOKUP(SOURCECURR),CURRENCY=u201DUSDu201D)
    *ENDWHEN
    *COMMIT
    Hope this helps.
    Santosh

  • Time Machine for shared group folders

    Hi,
    I would like to set up time machine for a shared group folder on the server. I would like users to be able to use time machine from clients to see backup history of files in the group folder. Is this possible? How?
    Gregor

    +...would like users to be able to use time machine from clients to see backup history of files in the group folder. Is this possible? How?+
    Yes. This is possible, but it isn't touted as one of the features that sells Mac OS X Server. The advertised Time Machine server solution is to host an AFP share point on the Mac OS X Server system which clients then use as a Time Machine backup destination, similar to Time Capsule.
    But, what I think you're going for is something like this: You have a share point where multiple users can read and write, and you'd like the server to be able to backup that share point via Time Machine, but also allow its clients to connect and see those backups. This is kind of like "Time Machine for a sharepoint." Again, this isn't really touted, but it's possible. Here is an example which shows you how.
    For starters, let's say that your server's disks are well-organized. You have one volume for the server's operating system (Boot), one volume for the share points (Data), and one volume for backup (Backup). Other scenarios could work, but this configuration will make this how-to easier to understand. Let's also agree that your server's hostname is junglecat.amazon.private.
    Let's say that the share point (group folder) that we want backed-up is at /Volumes/Data/Group-Folder on the server. Let's also agree that your group members already have access to this folder - e.g. it is already a share point with an ACL entry that grants the group members read and write access.
    You'll need to configure Time Machine on the server itself first, just as if it were a client. Open System Preferences, and use the Time Machine pane to choose the Backup volume as the server's backup destination. You'll want to make sure that only the contents of the Data disk (the disk housing the Group-Folder) are backed up. Skip anything on your boot disk, as you're using Time Machine to back up just the share points. Let the server at least start its first backup, which will create the following directory:
    /Volumes/Backup/Backups.backupdb/junglecat.amazon.private
    ...where the server's Time Machine backups will be stored.
    Now use Server Admin's File Sharing section to make the /Volumes/Backup disk a share point, with these properties: Share the folder via AFP, and enable it as a Time Machine backup destination. (Your clients will not really be backing up to the folder, but they will be needing to see it as a place that Time Machine can keep a backup. This creates the .com.apple.timemachine.supported file on the share point.)
    It's also a good idea to disable guest access and add an ACL deny rule to the share point (/Volumes/Backup) which denies delete and delete_child for everyone:
    chmod +a "everyone deny delete,delete_child" /Volumes/Backup.
    This prevents people from storing other data next to the Backups.backupdb folder. The Backups.backupdb folder already contains an ACL deny rule that limits its access to read-only.
    Back on a client, mount the newly-shared Backup share point. The client's Time Machine may ask permission to use this as a backup location (because it was defined as such), but don't let it. The important thing is that the client recognized it as a backup location.
    To browse the server's Time Machine history, the client must right-click on the Time Machine icon in the Dock (or use the Time Machine menu extra) and choose "Browse Other Time Machine Disk," where the user can choose the server's backup volume. Now the client can go back in time on the server, star-field and all. If the user needs to restore a file, Time Machine will ask him/her where to save the restored copy; it will not overwrite the copy on the Group-Folder share point.
    Hope this helps!
    --Gerrit

  • Wmi script to find out the time when the user was added to local administration group

    Hi Friends,
    i need a script/query based on wmi/wql that find out the time when the user was added to local administration group on this computer
    Regards
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

    WMI does not keep security information.
    Unless you have enabled auditing, this information is not retained in any way.
    If auditing is enabled, you can write a powershell script to look for the specific event in the eventlog. More specifically, you should look for all security events with id 4732 containing the group.
    this one command does the trick
    get-eventlog -logname security -instanceid 4732 -message *administrators*
    https://technet.microsoft.com/en-us/library/dd772663(v=ws.10).aspx
    MCP/MCSA/MCTS/MCITP

  • [svn] 3891: Adding a DataGroup and Group Flex Explorer example for Steve S.

    Revision: 3891
    Author: [email protected]
    Date: 2008-10-24 16:32:40 -0700 (Fri, 24 Oct 2008)
    Log Message:
    Adding a DataGroup and Group Flex Explorer example for Steve S.
    Linked these examples to the ASDoc.
    Modified Paths:
    flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/DataGroup.as
    flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/src/mx/components/Group.as
    flex/sdk/branches/gumbo_alpha/samples/explorer/explorer.xml
    Added Paths:
    flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/asdoc/en_US/mx/components/example s/DataGroupExample.mxml
    flex/sdk/branches/gumbo_alpha/frameworks/projects/flex4/asdoc/en_US/mx/components/example s/GroupExample.mxml

    Is this the webpage you're referring to: http://www.ngeneng.com/services/default.html
    If so, consider using <h2> <h3> <h4> tags for headings and use <p> only for paragraphs.
    Something like this:
    <h2>Services</h2>
                <h4>
                Watershed Planning and water rights</h4>
                <p>
                NextGen staff have worked on watershed assessments and management
                plans from data collection to reporting and implementing
                recommendations, as watermaster staff in adjudicated basins (San
                Gabriel River, and Central Basin), and participated in the court
                process to determine water rights (Santa Maria groundwater rights).
                This understanding can be helpful in any water conflict negotiation
                or planning process.</p>
                <h4>Creek Restoration, Levees, Embankments and
                Bio-Engineering</h4>
                <p>
                Planning and design of creek restoration and flood protection
                facilities including river embankments, open channels, underground conduits, levees, debris and
                detention basins, use of bio engineering methods to retain and
                enhance environmental values of project sites. Designs include use
                of spurs, dikes, large wood debris (LWD),
                vegetation and natural
                materials.</p>
    Your markup has lot of redundant spaces in form of   tags. Clean your markup first. Then style the page with CSS.
    Define your CSS properly and call them as classes or IDs within your html constructs. Do not ever use inline styling.

  • Exchange 2013 OWA - Open Shared Group

    We have users who create personal distribution groups by using their Outlook clients (2007/2010/2013), and when the groups are shared and opened with Outlook clients the users are able to view the shared group.  Everything works fine when its client
    to client.
    Now, we have thousands of users who only use OWA 2013 as their primary source for email.  When a client user sends a sharing invitation to an OWA user, the OWA  user is not able to open/view the invite and they receive the following error:
    The action couldn't be completed.
    An error occurred and your request couldn't be completed.  If the problem continues, contact your helpdesk with this HTTP status code: 500.
    Now, what's strange is that the user sending the shared distribution group is sending it out as a shared group, but in OWA it is received as a Shared Calendar. 
    Is there any way that a user in OWA 2013 can open a shared distribution group that was created by a user who was using an Outlook Client?

    Hi,
    The main limiting factor here is OWA. OWA is limited in that it can't open two mailboxes in the same session the same way Outlook can.
    It’s recommended to use sever side DL instead of personal DL.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • HT204053 If I am joined into a family sharing group and I share my purchases does this mean they see all my apps that I have downloaded and the ones that had at once but deleted?R

    If I am joined into a family sharing group and I share my purchases does this mean they see all my apps that I have downloaded and the ones that had at once but deleted?

    Hi apples-consecutive-buyer-for-life,
    Family Sharing makes all of your past purchases available to other family group members, including most apps. See this article on what content can be shared -
    Which purchased content can I share using Family Sharing
    Note also that content can be hidden. See this article - 
    Hide and unhide purchases in the Mac App Store
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • In IOS8.1, Reminders App, is there a way to set an alert to notify you that something has been added to a shared Reminders List?

    In IOS8.1, Reminders App, is there a way to set an alert to notify you that something has been added to a shared Reminders List?

    This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
    The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
    Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
    I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
    http://apple.com/feedback/macosx.html
    Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

  • ESSO-LM sharing group and multiple credential

    Hy,
    I use ESSO-LM (1.4.1.1.0 fix 2).
    I configured sharing group for 4 applications whitch use the same credential. I have some people witch have multiple credential for this group of application.
    My problem is that the ESSO-LM not permit to log with 2 different set of cedential when i use the sharing group for this application.
    Have you an idea to correct this?
    Best regard
    Xavier

    two options...
    1 - go to global agent settings ->live->enduser exeperience->response
    Select Display "Add another logon" checkbox
    This will enable a checkbox for when the user 1st enrolls the u/p to fill in a 2nd or 3rd credential
    OR
    2 go to logon manager (the wallet or whatever you call it ) copy the existing credential then change the 2nd credential to what you want.
    when you go to that site you will get a chooser on which one to use
    tomatolord

  • ITunes voucher & family sharing group

    hi my child is 11 and in my family sharing group. she received an iTUNES voucher for christmas and has redeemed it on her own id but she cannot use it?
    can you advise us how to get around this problem?

    gmanthefirst wrote:
    hi my child is 11 and in my family sharing group. she received an iTUNES voucher for christmas and has redeemed it on her own id but she cannot use it?
    can you advise us how to get around this problem?
    G Man,
    If she redeemed the card on her account, and it correctly reflects her credit balance, then she should be able to buy  items with it.  Here is the explanation of how it is supposed to work:
    Family purchases and payments
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.
    Try again and see if it works that way.  If not, contact Customer Service for assistance.

Maybe you are looking for