Adding virtual paths with the web listener....
Hi ,
I have installed the Forms6i Server on RedHat 4. After its installation the installer notifies that some entries should be added(some virtual paths with the web listener).
For example :
/forms60java for physical dir ocldev/forms60/java
/jinitiator for physical dir /orcldev/jinit/doc
e.t.c.
Can you please specify this file which should the above be added...????
Thanks...a lot
Sim
Because of some relink errors ... i've tried to install it (Forms Server) on a WinXp machine....
Since i have not installed any other web server , i used the IIS and at least - i have not tested with a simple form- i have seen the test form provided by Oracle....(You know one form which notes: "Forms server successfully installed").
As regards, the doc ... it points out what you've written :
Apache and any other web server assuming that some specific virtual paths to be added.....
Note: I think that those 'relink errors' occur because some of the RedHat packages are missing...
Thanks...
Sim
Similar Messages
-
How to configure the virtual path with our web listener
Oracle Apps Version: 11.5.10.2
Oracle database: 10.2
platform: Windows server 2003
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Hi,
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Do you mean (Patch 6194129)? How do you get this error? Is it at the beginning or the end of the installation?
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Please make sure you source the application env file before applying this patch, and select 8.0.6 ORACLE_HOME.
Thanks,
Hussein -
[ACTION] Please configure the following virtual path with your web listener: /jinitia
Hi Guys,
Would kindly suggest me. How to solve this following setting? From the documentation, I could not understand, which file or where should I do the following configuration.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory C:\ORACLE\iSuites\tools\web60\temp.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory C:\ORACLE\iSuites\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory C:\ORACLE\iSuites\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory C:\ORACLE\iSuites\tools\web60\cgi.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory C:\ORACLE\iSuites\JINIT
I appreciate your information and help.
Thanks,
AmitHi,
while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener
following is the output of forms6iconfig.txt file which oracale suggest to check
Do you mean (Patch 6194129)? How do you get this error? Is it at the beginning or the end of the installation?
Configuration Steps for Oracle Forms installation of 06:21:33 2010/12/01
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory D:\CLONE\cloneora\8.0.6\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory D:\CLONE\cloneora\8.0.6\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory D:\CLONE\cloneora\8.0.6\JINIT.Please make sure you source the application env file before applying this patch, and select 8.0.6 ORACLE_HOME.
Thanks,
Hussein -
After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.
I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
Problems Stroking Path with the pencil cs6
I´ve been making pixel art for a while now and recently I upgraded to cs6.
all was fine till I tried to stroke a circular path with the pencil tool.
The Circles it makes are completely uneven. I cant figure out a way to fix this. Help please.
These are the paths i traced in different sizes
this is the stroked path with a 1 x 1 pixel pencil
as you can see the the bottom and right part of the circles is different from the top left. it is more noticeable on smaller circles.
it also happens with bigger stroke sizes.
this diddn´t happen in cs5.
I would appreciate any input.If a path is in precisely the same location in CS5 and CS6 then strokes made with the Pencil will be almost (or possibly actually) identical in both versions. However, CS6 has an added preference to restrict the positioning of paths with respect to the pixel grid and I think that the positioning of your paths is not as you intended. You'd have got reasonably symmetrical Pencil-stroked circles if the N, E, S and W points of the circular paths lay mid-pixel. These points in your example are lying on pixel boundaries, hence the asymmetrical strokes.
To get CS5's free positioning of paths in CS6, disable Preferences > General > Snap Vector Tools and Transforms to Pixel Grid. Then it'll be possible to get in CS6 the result that you got in CS5. -
How to get the path of the web-archive on the local filesystem?? [Apache]
Hello all,
Im running a webapplication on a tomcat server.
I need to find out the path of the web-archive on the local filesystem to access several files.
How can I do that with out having an instance of HttpRequest or whatever??Hello Bruce.
Please take a look at the following KBase article. It has a sample that will retrieve the folder structure for a specified Crystal Report template based on the instance name in the file store. The sample there can be easily modified so that it is based on a specific infoObject id.
1549728 - How to find the folder structure in the CMC of a report template based on the instance file name in the output file store.
The KBase can be retrieve from the following link:
https://bosap-support.wdf.sap.corp/sap/support/notes/1549728
Please note that the KBase article is retrieved through the Service MarketPlace.
I hope this helps.
Regards.
- Robert -
How do I constrain anchor angle when I tug on a path with the direct select tool?
How do I constrain anchor angle when I tug on a path with the direct select tool like it did in every version of Illustrator since 1988? New behavior is costing me time.
That solves it!
I was not able to find this in the online materials about the pen tool. In fact, Illustrator Help | Adjust path segments does not show the new functionality at all. They need to update that article.
Better way to implement the new functionality
It would have been nice if Adobe added to the chording controls for the direct select tool the ability to toggle this setting temporarily by holding down the space bar after mouse down to drag a segment.
Before mouse down this would give the user the hand tool.
If, after mouse down, I could hold space bar and have the behavior switch from the historical capability where dragging a segment cannot change adjacent segments to the new behavior where dragging the segment cannot move anchors but can rotate them, I am sure I would find times when the tool saved time. If, before mouse up, I release spacebar, turn the constraint back on with anchors pointing in their new directions and allow me to stretch the curve protecting the new shapes of adjacent curves.
Using space bar for this would be intuitive to me because holding down the space bar is something I already do to organically drag the page around with the hand tool. The new tool allows me to more organically stretch artwork around, something that is distantly analogous, but close enough to remember.
For long time Illustrator users, the chording features holding Ctrl/Alt/Shift/Space or Ctrl/Command/Shift/Space in different combinations while using the direct select tool and pen tool is the killer app part of Illustrator that keeps us using it. This what we did on Illustrator 88 on a Mac Plus in 1988 and is still the most productive way to produce vector art when precision is required. -
The problem is on my desktop and my laptop. I got a bit click happy on my desktop computer and hit the Web Developer button. I was trying to delete a really annoying flash ad on the side of the screen. I think I got into page source and deleted the node. I'm truly not sure what happened, but pictures stopped loading for ebay and everything is a worded list down the side of the page. I have deleted cache and cookies. I have reset mozilla. I have uninstalled and reinstalled mozilla. Laptop was not immediately affected, but now having the same problem.
This is a very strange issue.<br>
No changes made with the web developer tool will save and should be cleared when the page is reloaded.
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back soon. -
An error occurred while trying to communicate with the web browser.
I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
Only the FF browser is open.
When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
[Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
Thank you!Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 10.2
# Adobe PDF Plug-In For Firefox and Netscape 8.2.4
# Shockwave Flash 10.0 r22
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/ -
How to get the ablolute path of the web application in WebSphere?
How to get the ablolute path of the web application in WebSphere?
For example:
I have installed IBM WebSphere on D:\WebSphere\Appserver, and I created a new appliction named "myapp" on D:\myapp,. How can I get the absolute path of application "myapp"? In other words,how can I get the absolute path of the application's
root directory?In the WebSphere(default), what directory is the Java Bean's root directory ?
-
Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80. -
Trying to reconnect with the Web Service
Hello, this is my first post.
I have an interface that currently is running through BPM from Sap to a Web Service.
The problem is that when sending many messages get an error "java.io.IOException: invalid content type for SOAP: TEXT / HTML" but when it is sent manually reprocessing satisfactorily.
There is a way to configure the interface to send a message and when not to connect with the Web Service; try again send?
ThanksThe function that is getting called is createMessage. It Internalizes the contents of the given InputStream object into a new SOAPMessage object and returns the SOAPMessage object.
The InputStream object contains the data for a message headers - the transport-specific headers passed to the message in a transport-independent fashion for creation of the message
What is returned is a new SOAPMessage object containing the data from the given InputStream object
The error java.io.IOException - will be thrown if there is a problem in reading data from the input stream. Please check the data being passed in the InputStream - the signrature of the call is ...
public abstract SOAPMessage createMessage(MimeHeaders headers, java.io.InputStream in) throws java.io.IOException, SOAPException -
I need help with the Web Application Certificate
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
3. Getting Your Certificate Officially Signed
C. Select the self-signed certificate, then click File > Certification Request > Import CA Reply.
I can get the certificate in to the Filr appliance but from there I'm stuck.
Any help much appreciated.Originally Posted by bentinker
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
ok when you have you self signed certificate and you requested an official certificate with the corresponding CSR then you just need to go back to the digital certificates console. To import the official certificate, select the self signed certificate, then click File > Certification Request > Import CA Reply. Then a new windows pops out to select the certificate from your trusted authority from your local hard disk. Find the file (.cer worked for me) and click ok. As soon as you do this in the digital certificates console the self signed certificate will change the information that now it is officially signed. Look at the second column and you should see the name of your trusted authority under "issue from"
I personally had a lot of issues across all platforms. Especially Firefox and Chrome for android. Needed to pack all the root cert, intermediate cert and signed cert into one file and import as CA reply. Not even sure if this is correct now. But at least it works. -
Several paths with the virtual-directory-mapping in weblogic.xml
Hello! I don´t know if this is well posted here. Sorry, and my english is aswful :(.
I´m trying to put several paths for jsp files in an application, similar to how the extendend document root works in websphere.
How can I get this on weblogic? With this lines I only managed to get the first but the second url-pattern doesn´t work.
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>/path1/</local-path>
<url-pattern>*.jsp</url-pattern>
</virtual-directory-mapping>
<virtual-directory-mapping>
<local-path>/path2</local-path>
<url-pattern>/jsp/*.jsp</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
My intention is make that the app could access to jsp´s files in path1 and in path2. Is this possible on weblogic?
Thanks in advanceI see. In my case, x == images, so if I reverse my directory
structure I could still get this to work for me. For instance:
<virtual-directory-mapping>
<local-path>C:\webapps\context\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
/images/z.gif would map to C:\webapps\context\y\images\z.gif.
I'll have to weigh changing our directory structure vs. keeping the
servlet we have that rewrites the URL.
Thanks for your help.
Scott Steimle.
Rajesh Mirchandani <[email protected]> wrote in message news:<[email protected]>...
From the developer
Virtual directories just replace the doc root. The doc root in your case
is C:\webapps\context\x\y. The request uri is /images/Z.gif. So the whole
thing resolves to C:\webapps\context\x\y\images\Z.gif. Which is where the
image should be located.
We have cleared up the docs. Sorry for any inconvenience.
Scott Steimle wrote:
Hi. I noticed in WebLogic Platform 7.0 there is a entry for
WEB-INF/weblogic.xml that defines a virtual directory. Example:
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web
Application 7.0//EN"
"http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>C:\webapps\context\x\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
In this case I'm assuming that a request of the form
http:/host:7001/context/images/z.gif would map to the physical file
C:\webapps\context\x\y\z.gif. However I cannot get this to work. Is
my assumption about it's use incorrect? Is the syntax of
<local-path/> or <url-pattern/> wrong? Is there something you have to
do to get WebLogic to recognize the weblogin.xml file?
This is urgent. Please help.
Thanks.
Scott Steimle
Software Engineer
Convera -
Creative Zen Review With the AudioBook Listener In Mi
Here is a copy of my review of the Creative Zen which I just published on the amazon.com mp3 player forum in the thread I started over a year ago entitled "What's the best player for AudioBooks " It is the longest thread in the forum with little indication of slowing down, and it can usually be found as the first thread in the forum.
http://www.amazon.com/tag/mp3%20play...MxM6KCQW5Q9B6C
I wound up getting the Zen 4GB a few weeks ago but delayed posting until I figured out how I liked it.
- I like that it has a big screen with big text that I could get by using without my reading glasses (old eyes) in a pinch. That is a very toughtful touch I have't seen on any other players (not that I've seen them all.)
- The big screen will also show pictures and videos which I don't care much about but is a nice feature if desired.
- The big screen doesn't come with a cover and it will get scratched up fast. It took me a while to figure this out so my screen got a little scratched up before I realized it.
Consider screen covers mandatory. They are sold seperately in a 3 pack for around $8. This is so important the device ought to have come with at least one screen cover in the box, even if it raised the price $2. My screen cover has been on for a few weeks and shows no sign of wear or coming loose. I did combine it with a rubber device cover I got on amazon for $3 which protects the whole device and covers the edges of the screen and screen protector. The unit is now protected. The cover comes with a little strap and D-Ring clip which is good for hanging onto some piece of clothing.
- It has a built in battery which is good. It supposedly takes a long time to recharge but that is not an issue for me. I just plug it in to a USB port with the included 4" long cable and it has plenty of time to charge during the day for my use. A fast AC charger is available at extra cost (~$25 I think.)
- Defect: The unit shuts off after being on pause for a few minutes (good) but it starts up at the beginning of the track when you restart (bad.) If you turn it off, it restarts where you left off as it should. This would not be an issue for music listeners, but it is for audiobook listeners when the track may be an hour to several hours long.
- Defect: Bookmarks are not at the top of the Menu list and although some menus are customizable, the one with Bookmarks is not.
- Defect: You can't get to Bookmarks when in the book. You have to back up to Music Menu, click to get to menu, and scroll 2 spots to get to Bookmarks. Not a deal breaker when you get used to it, but clearly not designed properly with the audiobook user in mind.
- Sound quality: very good. Even with music, very nice.
- Included headphones: Nice sound. They fall out of my ears and get tangled up a lot but I think thats true of most earbud headphones. I'm going to get the Sony Sport headphones I've had before with a foldable over the head strap.
- Bookmarks: 0. Plenty for me. (Who listens to more than 0 books at a time )
- Price: $90 for 4GB. I thought that was quite reasonable.
SUMMARY: With a few menu enhancements and the ability to return to it's place after a pause/shutdown, I'd consider this device close to perfect for the audiobook listener.Try going into "Control Panel->Administrati've tools" and clicking on "Computer Management". Find "disk management" in the left pane and click it. Your Stone should be in the right somewhere. I think you need to right click, then "choose dri've letter and paths" and give it a dri've letter with the "add" button. Let us know if that works.
Maybe you are looking for
-
When I am browsing on a web site and I click on an e-mail address that should open Outlook it dose not. it doesn't do any thing. I have tried this in safe mode and still nothing, I have also looked in the options / programs to see what program mail t
-
Sharing music & iTunes account questions
My daughter has an ipod touch and I have an iphone 4s. We currently have two separate itunes accounts on one computer. However, we are now wanting to share music. Is there a way to share music on two different itunes accounts but on the same compute
-
About Movement type used in Goods Issue from Subcontracting Stock directly
HI SAP MM Expert, We have transfer material to subcontractor through transfer posting using Mvt. 541 and raised subtracting challan also. Material is not returned by Subcontractor and now we want to debit Subcontractor A/c . For w we want to mkae Go
-
UCCHECK error: TRANSLATE... CODEPAGE/NUMBER FORMAT is not allowed
Hi , I am getting error " TRANSLATE... CODEPAGE/NUMBER FORMAT is not allowed" while doing UCCHECK activity. Existing code is DATA: BEGIN OF BIN_TAB OCCURS 500, SATZ(1500) TYPE C, END OF BIN_TAB. translate bin_tab from code page
-
How to set the size of an open dialog
HI Everyone: I cannot set the size of the open dialog. I create a menu and menu item called "open" The menu item "open" will call OpenFile(). However, I cannot set the size of the open dialog Everytime when the open dialog pops up the size isn't 500