Adding webpages from distant locations using two computers and two users

My daughter (Italy) and I (US) are building a website for her upcoming wedding. She has a website up on me.com and I am trying to add content to the website - both editing existing pages and adding new pages. She will be doing the same. Our email will not support exchanging a "domain."

Rather than using iWeb, consider building your web site using a free, web-based system such as:
SnapPages
SynthaSite.
Viviti
Shutterfly
Google Sites
...presumably, using any one of the above, you could share the user-id and password, and take turns to update the site.

Similar Messages

I wish to download (and use of course) Creative Cloud on my NAS to be able to have access from various locations using my laptop PC and tablet. Does anybody know whether this is possible? So the programm software at the NAS and operate it from there.

I wish to download (and use of course) Creative Cloud on my NAS to be able to have access from various locations using my laptop PC and tablet. Does anybody know whether this is possible? So the programm software on the NAS and operate it from there.

OK, thanks
but EULA ?? what does it stand for? I am pretty new to all this so good to learn something.
ps. backgroud of my request is, that I purchased LR in a box in 2013. The computer where this is on, is at the end of its life and I have no LR box with License or any reference nr's anymore.
Copied to my new Laptop, which maybe is not allowed if I understand you correct, it didn't work.
Pitty, because afterall it is still my legally relatively recent purchased LR version.
I thought to overcome this problem in future by putting it on my NAS. Safe for many years to come.
again any knowlegeable feedback is welcome to me.
Jos

Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

Question
Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

How do you get Itunes to only sync newly added photos from my phone to the computer and not every photo on my phone each time I try to sync?

Hello Angelcasper,
Welcome to Apple Support Communities.
The following article provides some suggestions on importing photos from your iOS device to your computer.
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Regards,
Jeff D.

HT204350 Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier"

Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier". Should be http://support.apple.com/kb/HT6025

I think the OP is saying OS X: How to migrate data from another Mac using Mountain Lion and earlier (which should be a link to HT4889) just links back to OS X: How to migrate data from another Mac using Mavericks (HT5872).
It does indeed do that, & HT4889 seems to be MIA.

I used this command and my user account is hidden sudo mv /Users/ed /Users/.ernestotaricone .

i used this command and my user account is hidden and my account name ED
sudo mv /Users/ed /Users/.ernestotaricone
Please help me retrieve this Ed account back. Will there be any luck?
When i checked the size of Users account the same gigabyte space is there but cannot see my user account ED

This is the report the system gave me: CFPreferences: user home directory at file://localhost/Users/ernestotaricone/ is unavailable. User domains will be volatile.
What of if i create another account say User account say good, can i transfer it back there?
Seth

How to get latest added file from a folder using apple script

Hi..
I am trying to get a latest added file from a folder..and for this i have below script
tell application "Finder"
    set latestFile to item 1 of (sort (get files of (path to downloads folder)) by creation date) as alias
    set fileName to latestFile's name
end tell
By using this i am not able to get latest file because for some files the creation date is some older date so is there any way to get latest file based on "Date Added" column of a folder.

If you don't mind using GUI Scripting (you must enable access for assistive devices in the Accessibility System Preference pane), the following script should give you a reference to the last item added to any folder. Admittedly not the most elegant solution, but it works, at least under OS X 10.8.2.
set theFolder to choose folder
tell application "Finder"
    activate
    set theFolderWindow to container window of theFolder
    set alreadyOpen to exists theFolderWindow
    tell theFolderWindow
        open
        set theInitialView to current view
        set current view to icon view
    end tell
end tell
tell application "System Events" to tell process "Finder"
    -- Arrange by None:
    set theInitialArrangement to name of menu item 1 of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "0" using {control down, command down}
    -- Sort by Date Added:
    set theInitialSortingOrder to name of menu item 1 of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "4" using {control down, option down, command down}
    -- Get the name of the last item:
    set theItemName to name of image 1 of UI element 1 of last scroll area of splitter group 1 of (window 1 whose subrole is "AXStandardWindow")
    -- Restore the initial settings:
    click menu item theInitialSortingOrder of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1
    click menu item theInitialArrangement of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1
end tell
tell application "Finder"
    set current view of theFolderWindow to theInitialView -- restore the initial view
    if not alreadyOpen then close theFolderWindow
    set theLastItem to item theItemName of theFolder
end tell
theLastItem
Message was edited by: Pierre L.

Added custom screen in PO using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST

Hi All,
I have added custom screen with two z fields at item level using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST i can see my screen in tcodes ME21N , ME22N , ME23N but I am not able to save data.
and also screen is coming in change mode even in ME23N .
thanks.

Hi,
I have added two xfields at item level.
This is the code i have added in zimplementation ZME_GUI_PO_CUST .
IN Zimplementation ME_PROCESS_PO_CUST I have added code only in method FIELDSELECTION_ITEM . after doing this I can see only screens in ME21N, ME22N, ME23N but when enter data in zfields and trying to save it is giving me message no data has changed.
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element     = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '0001'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLYMEPOBADIEX'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
a label can be defined
ls_subscriber-label = text-001.
the position within the tabstrib can be defined
ls_subscriber-position = 4.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_MODEL.
DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
        ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl.
system asks to transport data from the business logic into the view
CASE im_name.
    WHEN subscreen1.
is it an item? im_model can be header or item.
      mmpur_dynamic_cast l_item im_model.
      CHECK NOT l_item IS INITIAL.
transport standard fields
      ls_mepoitem = l_item->get_data( ).
transport customer fields
      CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
        EXPORTING
          im_ebeln = ls_mepoitem-ebeln
          im_ebelp = ls_mepoitem-ebelp
        IMPORTING
          ex_data = ls_customer.
store info for later use
      MOVE-CORRESPONDING ls_mepoitem TO dynp_data_pbo.
      MOVE ls_customer-badi_bsgru TO dynp_data_pbo-badi_bsgru.
      MOVE ls_customer-badi_afnam TO dynp_data_pbo-badi_afnam.
    WHEN OTHERS.
ENDCASE.
endif.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_DYNP.
CASE im_name.
    WHEN subscreen1.
      CALL FUNCTION 'YMEPOBADIEX_PUSH'
        EXPORTING
          im_dynp_data = dynp_data_pbo.
    WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_DYNP.
CASE im_name.
    WHEN subscreen1.
      CALL FUNCTION 'YMEPOBADIEX_POP'
        IMPORTING
          ex_dynp_data = dynp_data_pai.
      IF dynp_data_pai NE dynp_data_pbo.
something has changed therefor we have to notify the framework
to transport data to the model
        re_changed = mmpur_yes.
      ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_MODEL.
DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
        ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl.
data have to be transported to business logic
CASE im_name.
    WHEN subscreen1.
is it an item? im_model can be header or item.
      mmpur_dynamic_cast l_item im_model.
      CHECK NOT l_item IS INITIAL.
      ls_mepoitem = l_item->get_data( ).
standard fields changed?
     IF dynp_data_pbo-matkl NE dynp_data_pai-matkl OR
        dynp_data_pbo-plifz NE dynp_data_pai-plifz OR
        dynp_data_pbo-webaz NE dynp_data_pai-webaz.
update standard fields
       ls_mepoitem-matkl = dynp_data_pai-matkl.
       ls_mepoitem-plifz = dynp_data_pai-plifz.
       ls_mepoitem-webaz = dynp_data_pai-webaz.
        CALL METHOD l_item->set_data( ls_mepoitem ).
     ENDIF.
        CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
          EXPORTING
            im_ebeln = ls_mepoitem-ebeln
            im_ebelp = ls_mepoitem-ebelp
          IMPORTING
            ex_data = ls_customer.
        ls_customer-badi_bsgru = dynp_data_pai-badi_bsgru.
        ls_customer-badi_afnam = dynp_data_pai-badi_afnam.
        CALL FUNCTION 'YMEPOBADIEX_SET_DATA'
          EXPORTING
            im_data = ls_customer.
     ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDIF.
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM.
DATA: l_persistent TYPE mmpur_bool.
CONSTANTS:
FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
l_persistent = im_item->is_persistent( ).
*IF l_persistent EQ mmpur_yes.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                     metafield = MMMFD_YYMAN_NUM."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                     metafield = MMMFD_YYMAN_DES."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
*ENDIF.
ENDIF.
endmethod.

How can we use two user certificates at a time?

Hi,
I want to use two different user certificates for two different trading partners. Can we keep two private keys in single wallet and use those simultaneously? In our case our two trading partners are using different CA's certificate and we are forced to use two private keys.
Please tell me that is there any way by which I can manage two private keys at a time in single wallet?
Please help.
Thanks & Regards,
Anuj Dwivedi

a. How To Extract A Private Key and Certificate From A Wallet
Oracle does not provide any functionality within Wallet Manager, or otherwise, to do this. However this can be achieved using OpenSSL.
- If a Linux server is available, OpenSSL is usually installed by default (/usr/bin/openssl). If not you can download it from www.openssl.org
- To extract the key and certificate from the Wallet run:
openssl pkcs12 -in ewallet.p12 -passin pass:<wallet_password> -out ewallet.txt -nodes
- The resulting ewallet.txt is a file that contains the unencrypted private key, the certificate and all the root CA's in the wallet. Then the relevant information for the key, and certificate(s) can be copied to separate files to create the individual key and certificate(s)
b. How to Convert a Certificate and Private Key to an Oracle Wallet
SSL2OSSL (UNIX) and OSSLCONVERT (Windows) are tools that allow you to convert Private Keys and Certificates to an Oracle Wallet format. This format is required for Oracle Application Server. $ORACLE_HOME/Apache/Apache/bin/ssl2ossl
Points to Note:
* Even though capath, cafile, and chain are optional, at least one must be specified.
* All the certificates that are being converted must be in base64 format.
* If you are converting a self signed certificate, running ssl2ossl/osslconvert does not import the certificate as a Trusted Certificate. Therefore it is necessary to import the certificate as a Trusted Certificate in Wallet Manager after its converted, otherwise the Wallet will not work with Application Server.
usage:
$ ssl2ossl -cert /<path>/server.crt -key /<path>/private.key -cafile /<path>/rootca.crt -wallet /ssl/wallet -ssowallet yes
Enter wallet password:
Verifying password - Enter wallet password:
SUCCESS
This will create a ewallet.p12 file in /ssl/wallet

Newbie - Be gentle - Using multiple computers and IPods

I have 3 kids wanting to use my computer and a separate computer at their other parents' house for ITunes. Can this be done? How? We have already had problems with ITunes erasing songs from one computer etc. Any help appreciated.

you need to set up the ipods for manual synching go to edit>prefernces iPod tab. This way you can add music from either PC without deleting what is on the iPod

Is it possible to download a mail(.eml) from outlook 365 using exchange service and store in database using c#

Hi All,
I have a outlook mail account ex:- my mail account id is
[email protected] , using c# code and Microsoft.Exchange.WebServices ,
I want to download entair email and want to save this email in database , is it possible suggest me how can I go forward on this, if not possible please suggest some alternative ways to find the solution.
the reason want to store this entair mail is on click on some button I want to open this mail from database in .eml format with attachments if any are there.
Thank in Advance
Ravi

Hello Ravi,
Try this:
http://msdn.microsoft.com/en-us/library/office/dn672317(v=exchg.150).aspx#sectionSection2
With regards,
Michael | Microsoft Exchange Developer Content
The
Exchange Development Forum Guide has useful information for using the Exchange Development Forum.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Using two User Stores for one relying party trust

Hi all,
We got a request to implement a trust with an external party.
Internal users should be able to make use of that application. But also external users, which have their account stored in a different user store (question is asked if its a SQL or LDAP kind of store).
Is it possible to have a SSO effect for both internal and external users?
Somehow ADFS has to know if the user is internal or external. I can imagine an internal user being in the office will get a nice SSO feeling. From what i think this is not possible for external users. External users should still authenticate once on our sts
(adfs). Lets say this is true, is it possible for ADFS to see if a user is external, and then use the User Store that belongs to that external user?
You also must take in mind that an internal user could also be in a internet cafe, so SSO is not possible. Also this time the user should authenticate to the sts. But this time it has to use Active Directory as User Store.
I know internal users have a username in a different format then external users.
Is it possible for ADFS to know which User Store to pick based on the format of the username?
Thanks in advance for the reaction.

Hi,
Thank you for your posting!
Since Active Directory Federation Service is not an extension of Active Directory schema, I suggest you refer to the following forum to get professional support:
Claims based access platform (CBA), code-named Geneva Forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Thank you for your understanding and support.
Best Regards,
Amy Wang

Control your mac from apple tv using bt keyboard and mouse

Hello, is there a way to control a mac from the apple tv using the mouse and keyboard paired with the apple tv?
My mac and apple tv are in diferent rooms and I would like to use my mac with the mouse and keyboard from the living room.
I have trayed some ipad/iphone apps to control my mac while mirroring mac to apple tv but it doesn't work very well for me due to the lag of time...
I have been searching in internet about this but I didn't find much. I am wondering if maybe there is an app or something that can do what I want.
I have this devices to work with:
Macmini with apple bluetooth keyboard and magic mouse
Apple TV3
Ipad 3
Iphone 4s
Thank you very much

Welcome to the Apple Community.
Jorge1981 wrote:
Hello, is there a way to control a mac from the apple tv using the mouse and keyboard paired with the apple tv?
No.

I use two users on my iMac. iTunes works with one but not the other

My iMac is set up for two users. My music library is on my main user. About a week ago, iTunes starting crashing immediately upon opening. But when I quit the main user and go to my other one, iTunes works fine. Why??

Is the new iphone locked to another carrier?

How to use 'AT PF' and 'AT USER-COMMAND' is used in reports...?

HI,
I AM SIVA,
I AM NEW TO ABAP,
I HAVE NOT CLARY ON 'AT PF' AND 'AT USER-COMMAND'....
I DONT KNOW HOW AND WHEN TO USE ABOVE TWO EVENTS..
SEND ME ANY SOURCE CODE OF USING ABOVE TWO EVENTS...
IF U KNOW THE ANSWER...
PLEASE SEND ME...
REGUARS,
SIVA.

hi ,
the on;y diference b/w At User-command and PF Status is that in At user-command we create a menu but in PF Ststus we define the f1 to f12 keys.
eg; for at User Command.
let us take tables such as mara, marc, mard.
data : itab like mara occurs 0 with header line,
jtab like marc occurs 0 with hl,
ktab like mard occurs 0 with hl.
select-options matnr for mara-matnr.
initialization.
matnr-low = '0'.
amtnr-high = '1000'.
matnr-sign = 'i'.
matnr-option = 'bt'.
append matnr.
start-of-selection.
write :/ 'menu bar creation'.
set Pf Status 'MENU'.
at user-command.
case sy-ucomm.
when 'mm01'.
select * from mara into table itab where matnr in matnr.
loop at itab.
write :/ itab-matnr, itab-ernam, itab-ersda, itab-mbrsh.
hide itab-matnr.
endloop.
when 'mm02'.
select * from marc into table jtab where matnr = itab- matnr.
loop at jtab.
write :/ jtab-matnr, jtab-werks, itab-pstat.
hide itab-matnr.
hide jtab-werks.
endloop.
when 'mm03'.
select * from mard into table ktab where matnr = itab- matnr werks = jtab-werks.
loop at ktab.
write :/ ktab-matnr, ktab-werks, ktab-lgort.
endloop.
when 'mm04'.
do 10 times.
write :/ 'hi'.
enddo.
when 'mm05'.
write "/ 'u pressed enter'.
endcase.
now go to set pf status 'menu' n double click on it.
then press yes.
then again yes.
then u will find 6 tabstrips tht r blank in menu bar.
now go to the first tabstrip n name it as table...then in the code give mm01 n text as mara.then again give code as mm02 n text same with mm03.
then go to second tabstrip n give details n then i nt tht u give mm04 as code n text as hi.then mm05 as code n text....save check n activate,
then go to function keys n thre u will find save back error tabstrips name them s,c,activate.
then come back n activate.
then same thing is wit pf but there is no menu bar creation for it n instead of when 'mm01' we will give at pf04, at pf05....
one more thing we should always give pf keys from 04 as o1,o2,o3 r used help errors n activation.
if u found ur answer n if it is helpful to u then dont forget to reward with points,
with regards,
madhuri.

Adding webpages from distant locations using two computers and two users

Similar Messages

Maybe you are looking for