Adding wireless boosters but keeping single wirele...

Hi there
I've got BT broadband running at home. I've installed powerline adaptors that also act as wireless boosters.
The wireless network from these powerline adaptors has a different name and password to my main BT wireless.
Is there a way I can change one or other or both so that I can access the same network, in one login, throughout the house?
Thank you

Yes you can give your main router and the powerline adapters the same SSID if you wish (you will need to read the instructions for each device for how to get into the management web page to alter the SSIDs). However, I believe that it might be better to have a different SSID for at least the router - if you log on to each of the allocated SSIDs on each device (laptop, PC, tablet etc) not forgetting to tick the "Log on automatically" box in each case, then each device will remember those SSIDs and automatically log on to the strongest signal from either of the powerline adapters or the main router. The reason I say that it might be better this way is that it will surely be easier to troubleshoot the network should something fall over.
I'm sure that others on this forum with greater knowledge than me will correct the above if it is incorrect or there is a better way of doing things.
Mistakes and embarrasing goofs in e-mails are only discovered when you've sent them!

Similar Messages

I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)

I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)
I can ping through to the WLC and the AP.

Thanks a lot Loe for the Feedback. The issue was not my configuration but rather the type of Wireless LAN controller I have, the WLC does not support my AP's. I have a Cisco 520 series WLC and got to know they only work with the 500 series AP's. my AP's are 1130 series meaning i have to get another controller or change the APs.
thanks once again..

HT1386 trying to sync itunes to iphone. added app iconnect, but keep getting "your apple id isnt enabled for itunes connect (2002) (2002). How do I fix?

Tryin to sync from itunes to iphone. added iconnect app, but recieve "your apple id isnt enabled for itunes connect (2002) (2002)" . How do i fix?

You have to enroll in the ios developer program. https//developer.apple.com. once your enrolled you should be cool to connect.

How do I delete duplicate songs, but keep a link in their original albums to the single copy of the song left, so it will play in each album in sequence as if it were still there?

Greetings!
After importing my 300 or so CDs into iTunes, I found I have tons of duplicate songs.
Example: I have a song that came in a original album, then in again in a "Greatest Hits" album, then again in a "Hits of the 80's" album, and again in a soundtrack album. I have now have 4 copies of the exact same song.
How do I delete duplicate songs, but keep a link in their original albums back to the single copy of the song left, so it will play in each album in sequence as if it were still there?
I don't think this currently exists, but as my library keeps growing the duplicates keep growing. It would be nice if Apple sees this and adds a way to link songs to multiple albums.
I don't want to create a custom playlist for every album that has a duplicate song or two (I'd have dozens of playlists) - thought about fixing it that way but not really practical.

To my knowledge, there is no way of doing what you want. The only workaround is to create playlists for the other albums containing the track, but that isn't practical for most people.
You could provide Apple with feedback here: http://www.apple.com/feedback/itunesapp.html

My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Setting>:General>Reset>Reset Network Settings.
- iOS: Troubleshooting Wi-Fi networks and connections

HT204409 I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?

I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?

I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
Go to Settings > WiFi and turn it OFF.
Next go to General > Cellular > Cellular Data and turn it OFF
Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
Finally go back to General > Cellular > Cellular Data and turn it ON.
I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
Hope this helps!

My C7280 keeps dropping the wireless network but my C7180 is okay

My C7280 keeps dropping the wireless network but my C7180 is okay both have set IP addresses, both in same room and the C7280 has to be setet to see the wireless. It will work okay all day but the next day it has dropped the network.
Any ideas

What operating system? There is an update for "Windows 7 Critical Update to enhance reliability of network connection", the version for 64 bit Windows 7 is here. If you have a different operating system check HP's download page for your appropriate operating system and look for updates.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Adding wireless capability to Voyager 220V

My father has a Voyager 220V router - can I call it a router as it connects to only a single PC? Anyway, I would like to know how to add wireless functionality to it. If it had more than one network port, i.e. what I would expect a router to have there would be no problem - I'd add a Netgear wireless hub. So, all suggestions would be welcome. Richard

Struggling wrote:
Presumably he could use any (proper) router in place of the Voyager - at the cost of losing the VOIP functio?
What would those WiFi laws be then?
The point of adding wireless capability is to make use of the portability of my mother's new laptop. I don't fancy installing CAT5 and sockets throughout every room of their house - it was bad enough doing it in my own place.
Richard
You could try adding a DSL router as per my previous link but if the new router isn't fully compatible the VOIP system may not work anyway.
Make sure if using Wifi to use WPA2-PSK encryption with a strong passphrase.
This link may be helpful.
https://www.grc.com/passwords.htm
As for Wifi & up & coming Laws try this phrase in any search engine "Digital Economy Bill wifi".
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

HT204053 We have apple computer and set up 1 apple id and for music on iPods. Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do.

We started with an apple computer and set up 1 apple id and for music on iPods. Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do? Right now we have the same apple id on the PC, ipodtouch, ipod, and 3 phones. They said make seperate clouds?

Hello there MizzouTrojan,
If I understand correctly you want all 6 devices to have access to a single calendar that each device gets notifications for and can edit. You can do that with an private iCloud shared calendar. First sign into www.icloud.com and use these steps from the following article to share a calendar:
iCloud: Share a calendar with others
Share a calendar privately
Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
Note: You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.”
Type the invitee’s email address in the Add Person field and press Return.
Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only).
For each person you want to share the calendar with, repeat steps 2 and 3.
When you’ve invited everyone and set their privileges, click OK.
Invitation emails are sent from your iCloud email address to the participants you specified.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How can I delete a song from iCloud / iTunes Match, but keep it on my Mac?

How can I delete a song from iCloud / iTunes Match, but keep it on my Mac?
I subscribed to iTunes Match a few weeks ago and my entire library was uploaded. I do not want all of my library in the Cloud, especially given that there is a space/song limitation. Any help is appreciated.
Thanks!

Apologies Brandon, we have moved on somewhat from your original question.
What I have done is effectively used Michael's idea. I'll try to explain a little further.
You can run iTunes match on up to 5 computers, and you can edit the iCloud library on any of them. Michael's idea works on the basis that, whilst you can edit the iTunes library, you can't remove songs from other computers.
I have basically the same setup as you, but I also have a MacBook Air, which is running iTunes Match but without any music downloaded so it all streams.
I added the songs on my main library, which then added them to the cloud. When they appeared on my MacBook I deleted them straight away. As there was no local copy I was asked if I wanted to delete them from the cloud, and I said yes. When I went back to my main computer I found that, as expected, they were still there, but the iCloud status is "removed". They are therefore on my library but not in iCloud.
Since then I have run match updates a couple of times and there is no sign as yet that it will try to add them back to the cloud. It's too early to say that this is a definate answer to your problem, but it looks very hopeful.
Our other discussions have moved onto the 25,000 son limit, which I note from your comment you may also be interested in. Watch this space.
If you don't have access to a second computer to run the other library on then look back at Michael's post where he explains how to set it up on your main computer.
Hope that clarifies a bit.

HELP! I have a new mac book pro and I'm having problems getting it to print. We are trying to do it through the network (wireless). It keeps pausing or telling me the connection failed

Ok. I have a new macbookpro which I love. However, we can't get it to print. We just got Comcast with a modem and wireless router. We can all get into the net wirelessly (4 of us). My son set our PC to share the printer, gave it a name and got his PC to work through it. Mine kept pausing (it's been a week now). Finally connected directly to the printer and it immediately went out and found the drivers (for all HP photosmart series) and installed them (I think they are installed. At least they are listed under drivers in the print/fax section). We then did a test print with it hooked up and it worked. Back to wireless and it keeps pausing or telling me it can no longer communicate with the printer. Tried going back and printing while connected to the cable and it didn't work. Several pages of one liners with gibberish on it (some words like fax, document it) but then it failed. I did tell it the wrong model of printer the other day and there is a picture of it under the real printer (which is listed by the name we gave it on my pc). But I know have the correct driver and it shows it in the bar under the driver listing. The other picture of the wrong model is not highlighted and I don't know how to delete it). It just keeps pausing and telling me I'm no longer connected to the printer. BTW, It tells me the printer is ready and shows the name prior to trying to print. We've tried everything including many suggestions from others. Any suggestions? I find it strange I was able to print yesterday while connected directly and tonight it failed (otherwise the printer is working for others). THANKS SO MUCH! Frustrating to say the least but I'm NOT giving up. Carol

I should add that it's an HP photosmart 4280.I found it online and it shows the Mac 0SX operating system.

I have ios 7.1.2 and I still can't find a way to completely disable the parallax effect but keep animations

I understand that reduce motion disables the parallax effect but it also disables the animations. When I turn perspective zoom off, it keeps the background from moving when I tilt my iPhone but the apps still movie. How do I make the background and the apps stay still but keep the animations? Is there even a way to do that?

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Adding Wireless Profile XML In TS or Command Line in SCCM

I have exported my wireless profile to an XML file and have created a package and tried from the command line in TS but keep getting errors (0x00000001 or 0x80004005). The command line I've been using is netsh wlan add profile filename="<Profilename>"
I have to be missing something. Does anyone have any ideas?

Now I'm with you :)
My way of doing it is that i have my scripts included in the toolkit package (we do use integrated MDT).
Therefore i need a use toolkit befor i riun my script.
After that I just use a run command line step with Cscript.exe "myscriptname".
Sccm is running as system so it should have all permissions it needs.
By the way, you are not trying to do a gpupdate by chance? That will not work (at least not in 2007)

How to transfer iTunes library to an external drive (thats easy!) but keeping the playlists musics on the computer?

How to transfer iTunes library to an external drive (thats easy!) but keeping the playlists musics on the computer?
Many thanks!

Select a single song with a broken link, press CTRL+I to Get Info, cancel when asked to locate the track and take a look at the Summary tab. Post back where iTunes is looking for the file. It begins file://localhost
Where is it really?
Please post back both paths so that I can make suggestions. Full paths please, exact spellings, you can replace your user name with <User> if needed.
tt2

Adding wireless boosters but keeping single wirele...

Similar Messages

Maybe you are looking for