Adding Wireless-N-ONLY Time Capsule to Dual-Band Airport Extreme Network?

I have a dual-band airport extreme which I have configured to create both a wireless-a/b/g/n SSID on my network, as well as a second SSID which is Wireless-N-ONLY (meant to be used with my Time Capsule so that all backups to the Time Capsule via Time Machine are only ever done via Wireless-N).
My Airport Extreme is already configured, and now I just have to configure my Time Capsule on my network...
Can someone briefly run through the "assist me" steps in the Airport Utility that I'd want to follow to configure my Time Capsule so that it's available on my dual-band base station's wireless-N-ONLY network and so that it's not transmitting or receiving any other wireless protocol other than wireless-N?
Thanks!

Hi Bob,
Thanks for your earlier feedback. I now have a dual band TC and the previous dual band EABS and I'm tearing my hair out trying to get these things to play nice! Maybe you can provide some assistance:
1) The TC upstairs is connected to the comcast modem and is the main 'router' in my network. In addition, I'm using the "create wireless network" option on this router to set up both a 2.4 GHz and 5.0 GHz wireless environment.
2) The AEBS downstairs on the opposite end of the house is connected by ethernet - whole house is wired so I'm feeding from the TC upstairs through a switch in the disti box down to an outlet where I have the AEBS. The cat-5 cable is connected to a LAN port on the back of the AEBS.
3) I have the AEBS set up to extend the wireless network. When I do this it only gives me the ability to select one wireless network (I have the TC configured to call the 5 GHz network something different) - In essence doesn't appear to want to let me extend both bands of the wireless network.
The problem seems to be that once I get all the configurations set I have no connectivity and if I try to open the configuration via Airport Utility, its just a spinning gear and will never open to show the settings. This happens to with both the TC and the AEBS. It's like it's in a loop or something.
I immediately disconnect the AEBS from the network and suddenly all is well again.
I know this seems like a rant, but this has been kicking my a** for two days!! I've just about had it with the constant 'hard reset' of the routers and starting over with configuration. If you have any specific things I should do, or settings that are key to set up both devices to extend my wireless network throughout the house I would be so thankful!!
Thanks,
Don

Similar Messages

Time capsule not recognized by airport extreme - first time setup challenge

Air port utility not recognizing time capsule. We have airport extreme and time capsule (recent purchase to back up 2 wireless mac laptops and the G5 which is connected to the modem). Modem is conected to airport extreme and I connected the Time capsule via ethernet as I thought the speed would be 1GB and faster than wireless "n." Somehow now the airport extreme does not recognize the time capsule. In the network utility, airport is not listed, only ethernet and firewire. What steps should I take to enable time capsule to back up the laptops wirelessly as well as the G5 (non-wireless.) Thanks!

I would hold the reset button on the back of the Time Capsule for 5-10 seconds and I would wait to connect it to the AirPort Extreme to see if you can set it up. If you can access the Time Capsule with AirPort Utility then I would plug it into the AirPort Extreme and continue your setup.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

I want to replace a four year old Time Capsule for a new Airport Extreme, how difficult is it?

I want to replace a four year old Time Capsule for a new Airport Extreme, how difficult is it? The ADSL connection come from a Modern Router provide by the local Telephone company.

Reply back when you get the new device, but in short, you'll have to put your extreme in bridge mode and just connect the same wires as your current TC.
See here http://www.macobserver.com/tmo/answers/how-to-add-a-time-capsule-or-airport-extr eme-to-an-existing-network-with-br

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses? The hard drive on the TC quit working.

I do plan on using an external USB HDD for time machine backups. I have both 802.11g and 802.11n used for playing music via stereos.
I would recommend against it. Apple does not support Time Machine backups to AirPort Disks (USB HDD attached to the AirPort Extreme). Although folks have done so, we get a number of them here asking for help with their corrupted backups. If your backups are critical to you, please use another means (like connecting the USB HDD directly to your Mac) to do so.

V. Slow transfer speeds with new dual band Airport Extreme

I have a new Airport Extreme (late 2009, dual band, full 'N' spec) which I am using to replace an older Airport Extreme (early 2008, 5Ghz, 'draft' N).
I have a USB disk attached and was interested in benchmarking the transfer speed of the new Extreme, compared to the previous version. The results are puzzling / alarming.
Shown below are transfer speeds (file copied to the attached USB drive) under different connection standards (2.4Ghz / 5Ghz & a/b/g/n)
'Old' Airport Extreme
5Ghz - 'draft' N : ~5-7 Mb/sec
'New' Airport Extreme
2.4Ghz - b/g : ~3-5 Mb/sec
5.0Ghz - a : ~3-7 Mb/sec
5.0Ghz - N : ~200 Kb/sec
Hence transfer speeds appear to collapse when I try to make use of the 'N' spec with the latest Extreme. I have tried altering items such as - wide channels (on / off), interference robustness (on / off), 5Ghz channel (manual, instead of auto), with no upside.
I seem to be at the point of concluding that either
1. I have a 'broken' Airport Extreme
2. The WiFi card on my early 2008 iMac (which implements I guess the 'draft' N standard) is 'incompatible' with new the Airport Extreme under a 'N' connection.
Any thoughts ?

Since all devices in my wireless network are capable of latest 802.11n protocol, I really do not need older and slower 802.11a/b/g protocols. To achieve above 200 Mbit/sec, 5GHz band with wide channel option turned on is really necessary. Thus I really wish I can turn off the 2.4GHz radio band (seems Apple has set this band as default) of my new dual band Airport Extreme to avoid unwanted bandwidth degradation. Unfortunately this is not possible with radio mode setting in Airport Utility.
The best I can do to force connection with 5GHz radio band (with quite consistent result) is as follows:
On Airport Extreme through [Airport Utility>Wireless] :
Radio Mode: 802.11n only (5Ghz) - 802.11b/g/n
More Options>Wireless Network Option>Transmit Power: 100%
More Options>Wireless Network Option>Use Wide Channels: checked
More Options>Wireless Network Option>5 GHz Network Name:
checked and same network name with extra suffix "(5 GHz)"
On 27" iMac through [System Preferences>Network>AirPort>Advanced>AirPort]:
Preferred Networks:
Create only one profile in Preferred Networks for the above network name with suffix "(5GHz)"
Uncheck the option [Remember networks this computer has joined] to ensure there is only one profile under Preferred Networks .
Once all above settings are done, restart Airport Extreme in Airport Utility. Your computer should connect wirelessly to the base station through 5GHz band after booting most of the time. Even when it is not occasionally, simply go to the Airport icon in main menu bar and click on the network name with suffix "(5GHz)" in dropped-down list to connect manually. With all these settings, I have achieved 300 Mbit/sec bandwidth on my iMac most of the time for fast Time Machine backup.
How I wish feature for better radio mode control by end user will be implemented in next update of Airport Utility. Apple should trust end user's brain better than artificial intelligence (or ignorance ?) in wireless network implementation. Wireless traffic between the two radio bands and among various wireless devices should be segregated specifically in Airport Utility by end users whenever dual band Airport base stations are in use.

Why does the new Dual-Band AirPort Extreme Base Station act as a proxy?

The previous thread
http://discussions.apple.com/thread.jspa?threadID=1531675
has been archived and nothing came of it, but after testing, I'm certain that their findings are true.
The Dual-Band AirPort Extreme Base Station (AEBS) with firmware 7.4.1 acts as a proxy for TCP ports 21, 554, and 7070 when NAT is turned on. This can be verified by using Nmap on any external server known to NOT have the ports open and having Nmap return that the ports are open. You can telnet to these ports to verify that they're "open," even though they are not on the server.
This functionality appears to be undocumented and as far as I can tell, the only way to turn it off is to put the AEBS into bridge mode and having some other device do NAT further upstream.
As a computer professional, this functionality extremely undesirable, particularly since it is not documented and doesn't have an "off switch." I wasted a bunch of time with one of my network engineers because of this, thinking that some network router was spoofing our server. I also wasted a bunch of my time trying to detect whatever "stealthy rootkit" had opened a FTP server and some other botnet related ports on our server, when in reality, it was simply my AEBS tricking me.
Disabling NAT-PMP ("Enable NAT port mapping protocol") does not affect this.
Is it too much to ask to have a checkbox in the "Advanced" section of the AirPort Utility to turn this feature off?

Welcome to the discussions forum Michael Bennett2.
Thanks for investigating this odd behavior.
If you want your work to be noticed by those who can effect change, you'll have to tell Apple via their feedback link. It won't do any good to post it here.
http://www.apple.com/feedback/

Streaming DVD movies over Dual Band Airport Extreme Airdisk

Hello,
This is my first post in the discussion forums. I have been a long time reading of the discussion forums. I recently bought a late 2009 dual band Airport Extreme base station. I have been trying to stream DVD movies (TS_VIDEO) using the Airdisk feature. What I did, as an experiment, was to hook up the dual band Airport Extreme to my 2009 Mac-Mini using an ethernet cable from the base station to the Mac-Mini. I enabled file sharing on the Airport extreme base station. I hooked an external hard drive to the base station via a USB port on the base station. I mounted the Airdisk on the Mac-MIni. When I play the ripped DVD movies (TS_VIDEO) from the Airdisk I get a lot of stuttering using Front-Row. According to the Apple customer service reps, this is normal behavior. Can anybody comment on if this is normal behavior.

An uncompressed DVD should have a maximum data rate of around 6 or 7 Mbps and so be well within the nominal 300 Mbps of an 802.11n network - even allowing for the slower actual speeds attained due to networking overheads and weak signals. However, given that you have the latest Airport Extreme it sounds like you may be suffering from the common fault many are reporting in these forums, in which disk transfer rates are very, very slow over the 5GHz 802.11n connection. Look at some of the other threads here. It is clearly a fault in the current design (not a fault with your particular unit) and something that Apple are apparently aware of. Most are hoping it will be resolved in an updated firmware at some point in the future.
Edit: I just re-read your post and notice that you said you used a physical connection between the Airport and the Mac Mini. Thus no wireless involved. Nevertheless, others have reported poor data rates with disks connected to the unit, and so this may still be the issue. Check out some of the other threads here.
Message was edited by: Paul Howland2

How to connect a Time Capsule to an existing Airport Extreme?

I have an Airport Extreme connected to my broadband internet modem. This Airport Extreme is also connected to my audio system to be used by iTunes.
Recently I brougth my Time Capsule from another location to be included in the Airport Extreme network. I want to continue using Time Machine on the Time Capsule, and iTunes on the Airport Extreme.
I could get this to work, by connecting the Time Capsule to my modem, and setting it up to extend an existing network (the Airport Extreme network). Airport Extreme and Time Capsule are situated next to each other. However, performance of Time Machine was horrible, far too slow. If I connect my MacBook to the Time Capsule by an ethernet cable, it does not work.
When I set up the Time Capsule to create another wireless network, performance of Time Machine is okay. I cannot use iTunes on the Airport Extreme in that case. I have to switch networks for that.
I'm sure it should be possible to have both an Airport Extreme and a Time Capsule in one network, use iTunes on the Extreme, and Time Machine on the Time Capsule. But I do not know how it should be arranged.
Can anyone solve this problem?
Greetings from Holland, Koen

+What surprises me is that with setting 1 (TC joining AX) the Time Capsule has an option to extend the range of the network being joined.+
Yes, but it will only "extend" if you have a newer version of the AirPort Express, the 802.11"n" version. If you have an older "b/g" version of the AirPort Express, you can set the Time Capsule to "extend", but it won't and you'll have problems.
+With setting 2 (AX joining TC) the Airport Express does not seem to have this option.+
This probably confirms that you have an older "b/g" version of the AirPort Express. It does not have the "extend" feature.
+Could it be this option (which I did not switch off in my earlier experiments) which gave me such terribly bad transfer rates to my Time Capsule harddisk?+
That's probably the reason since the older version of the AirPort Express cannot be configured to "extend".

Time Capsule (simultaneous Dual-Band II) that is reporting problems

my TC is giving me this error.. both my macs are backing up fine but only one can access the internet.. any advice??
for the record, i just had a new cable modem put in and have gone through all the reset options..

Are the two Macs connected in the same way to the Time Capsule?
To learn more about the problem, launch AirPort Utility, select the TIme Capsule on the left, and click on "Manual Setup" at the bottom. You should see an amber "light" opposite "Status". Click on that or "Status" to learn the details of the problem.

How do i set up time capsule to work with airport extreme base to extend wireless network?

i have a airport extreme base, how do i set up a time machine to extend the wireless network i have with airport extreme? i have also 3 airport express's connected to the same network to extend my wifi all over my house. thanks in advance.

Much better graphics, thanks.
You can leave the Time Capsule connected by Ethernet from the Linksys and configure for a "roaming" network as mentioned previously.
To do this, open AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the AirPort Extreme
No check mark needed next to Allow this network to be extended
Radio Mode = Same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme
Confirm Password
Click the Internet icon, then the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Time Capsue to restart
Then power down the entire network
Wait a minute or two
Start the modem first and let it run a full minute
Start the AirPort Extreme the same way
Power up the switch
Power up the Time Capsule for a minute
Keep starting devices one at a time about a minute apart
Now, your computer will automatically pick up a wireless signal from either the AirPort Extreme or Time Capsule, whichever device is closer and providing the stronger signal.

Time Capsule has limited range - Airport Extreme worked fine. Solutions???

I have used Airport Express with my 2 Macs - Mac Pro (near the AE and modem, and MacBook Pro, normally used about 25 feet away, in another room. No problems. UNTIL I added Time Capsule. My access to the internet on the laptop is very, very slow. So bad, in fact, that I unplugged the TC, and am now using the AE once again. I really need to have everything backed up, which is why I bought the 2TB Time Capsule. Does anyone have solutions for this?

Duane:
I'm getting closer, but still have a problem.
AE has only one channel to work with, and it's set on Channel 1.
However, Time Capsule has two radio channel selections. The 2.4 GHz channel can be set on Channel 1, which I have done. But the 5 GHz channel 36, 40, 44, 48, 149, 153, 157, 161
I'm going through trial and error with the higher number channels, but have had no success when I move the laptop away from the Time Capsule unit.

Wireless HP Printer on Dual Band Airport Extreme Base Station

I'm looking to upgrade my router to the dual band AEBS. I'll end up with some n machines and some g machines, including a wireless HP printer. Will my n-enabled machines be able to print to the g wireless printer on the g network?
Thanks,
JD

+Will my n-enabled machines be able to print to the g wireless printer on the g network?+
Yes. All devices will receive an IP address from the AirPort Extreme, so they will all be on the same network and will be able to communicate with each other. This is true even if you have a wired only computer connected to the AirPort Extreme. It will be able to print to the printer.
But, if you enable the Guest network features, computers on this network will not be able to "see" other computers or connect to any devices on the main network.

How to Access time capsule backup data on Airport Extreme

Hi All,
Thank you in advance.
The Problem : One of our Mac Book Air was stolen and we have the MBA backed up on Airport Extreme.
Currently we don't have another MBA that can do a full restore. I just want to access the Airport Extreme Time Capsule Data and get few files that is in the backups.
I have been searching for a solution and still can't find a way to do this. It is just 1 set of files inside the backup.
Thank you again for all the help.
G

Hi LaPastenague
I went over the pondini.org website, however still I can't access other users data T
I can go and review my own data.
The Data is backed up ( shared ) on Time Capsule ( which means all the users in the same house uses this one single time capsule to backup )
http://www.apple.com/airport-time-capsule/
## We currently don't know what was the username or password the user was using.
I am also looking at the pondini.org and
"With Accounts: this allows setting up separate accounts, each with its own password and folder. You can set up accounts and passwords that correspond to the ones on your Mac (but passwords must be changed separately), and/or you can create different ones. Each account may have permission to Read, or Read and Write, or Not allowed. This is not recommended for use with Time Machine backups, as no single user can see everything on the disk(s). That's especially important if there's a space problem -- you'd have to connect with each account in turn to see the whole picture. The backups for each Mac are protected by the usual permissions anyway, so in most cases this option is overkill. There are also a few minor differences in the content of some of the windows when selecting the backup destinations"
We are usuing this "With Accounts" settings

Adding Wireless-N-ONLY Time Capsule to Dual-Band Airport Extreme Network?

Similar Messages

Maybe you are looking for