Adding zone dns edit to firmware

Hi,
I have the WRT54Gs. I bricked my old WRT54G trying to add zone edit dynamic dns to it. I need to run a dns client for zone edit but would like the router to run it for me. Any ideas how I can add zone edit to the firmware with out failure would be greatly appreciated.
Thanks,
PCWEBTeK

That's not really what I am looking for. I have a privet DNS zone set up on my server and would like to point a different zone to a different server while still using the root hints that are built into the dns server for everything else. take a look at this http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.6.pdf
and search for Forward Zones it's on page 50.
This doc talkes about the ability to do what I am trying to do just not how to do it.

Similar Messages

After I edited my contact list on my iphone I set up the icloud account. Now all of my old contacts have been added to the edited ones. If I delete the icould will I lose all of my contacts or just the ones brought in by icloud?

After I edited my contact list on my iphone I set up the icloud account. Now all of my old contacts have been added to the edited ones. If I delete the icould will I lose all of my contacts or just the ones brought in by icloud?

You cannot delete an Apple ID, you can just stop using it. If your photos are still on your phone now, then I suggest you do back them up. Transfer them from the phone into your iPhoto Library. iCloud only backs up your Camera Roll automatically. But the Camera Roll only contains new photos that were taken but not yet transferred using iTunes.

HP Image Zone Photo Editing Software.

Is there a windows 7 (64 bit) upgrade to the HP Image Zone photo editing software that originally came with my Photosmart Printer 8250?

Hi Arkle.
HP Photo Creations is a free download at www.hp.com/go/hppc. For more background, including links to overview videos, please see our resources page here on the forum.
Thank you,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Allow transfer zone [DNS Service]

Hi,
I'd like to know what does "Allow Transfer Zone option" means in the created zone of a DNS service?
Is it good or bad?
I think that if this options in enabled ... another Administrator can publish your created zone in other DNS Server? so I think that it's bad an little bit insecure no?
Thanks

I'd like to know what does "Allow Transfer Zone option" means in the created zone of a DNS service?
It allows another DNS server to transfer the zone information that your DNS server is authoritative for. Normally this would be allowed only for master/slave servers within your organization. Usually the 'allow-transfer { addressmatchlist };' option is accompanied by a list of IP numbers of the master/slave servers that you wish to transfer zone information to. The 'addressmatchlist', in the option, is a comma separated list of dotted quad IP numbers for the allowed servers. Zone transfers are usually controlled with a cryptographic secret to authorize the transfer and prevent servers from 'spoofing' their identity as a trusted host. No key == no zone transfer.
Is it good or bad?
Its primary purpose is to speed up the resolution of DNS requests for other DNS servers that would be querying your zone on a regular basis for name resolution. If you have a number of internal DNS servers that need to resolve hosts in your organization you would normally allow zone transfers to those servers by adding their IP numbers to the 'addressmatchlist' portion of the option. This would reduce lookup times for hosts that query those DNS servers. So, yes, it is a good thing.

Adding text to editable region creates space in the rest of my layout

I created my layout in PS, sliced the images and then imported to DW (html and images).
Layout looks great.
I created editable regions in the template I created from the .html
One I start inserting text into these regions, my container moves and it throws the rest of the layout off by adding space between the editable region and the area above it (a big black line horizontally through the page).
Is there a way to keep the container/editable region from moving or growing with the text so that it doesn't change my layout?
On a side note, this change doesn't appear in live view. When I preview in browser, Safari layout looks great, but text doesn't appear. In firefox, text appears, but layout is a mess.
Here is the code from the editable region to which I am trying to add text:

        <div id="site_layout_contentmain">Content for id "site_layout_contentmain" Goes Here</div>
      </td>
ANY help is GREATLY appreciated!!!!!

MHarvey2001 wrote:
Yes, the design is appearing to pull apart when I add content, but only in the Firefox preview.
If it pulls apart in Firefox, chances are it pulls apart in all browsers when text size is increased.
The problem with Photoshop code is that it is a) rigid, b) unstable and c) invalid.
To illustrate, run your code through the on-line validation tools below.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Photoshop is OK for designing quick comps to show the client but they won't hold up on a real site.
IMO, the benefits of starting over far outweigh the inconvenience.
HTML & CSS Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Personalized Template, can't edit added slides, only edit master slide

Hello Keynote Geeks!
I am counting on your expertise to help me with this challenge.
This is what happened:
1) I had a design company to create a personalized presentation template for my production company.
2) Whenever I try to use this template Keynote keeps insisting on only allowing me to edit master slides. Even after I added them to the presentation. This creates a dumb workflow in which I have to be duplicating master slides, editing them in the edit master slide menu and then adding them back to my presentation.
I recorded a 2 minutes screen flow video demonstrating the issue. Please watch it on this Vimeo link:
https://vimeo.com/124934712
I will be incredibly thankful to anyone that gives me a smart solution to optimize our presentation edit workflow.
Cheers from Brazil,
JP Jacobsen

A "geek" means a clumsy fool, I would never call anyone this.
You are not using the correct method to edit items on a slide. Double clicking an object on a slide that is on the slide master allows editing the master object, it does not allow editing the object on the slide.
The correct procedure is:
add a new silide based on a slide master of your choise
to add a photo to the slide;   use a Finder window to drag and drop a file onto the image place holder
to add new text to a slide; click on the text placeholder once, then type in the new text
This assumes the master slide was created correctly by using media and text Placeholders.
To add a text placeholder to a master slide: add a text box to the master then change the font, size and colour
select the text box then:     Format > Advanced > Define as text placeholder
To add a Media Placeholder to a master slide: drag and drop any image file of the correct format (vertical or horizontal) on to the master
select the photo then:     Format > Advanced > Define as Media placeholder
close the master slide by clicking the blue Done button bottom right

Adding Secondary DNS entry in server, but Changes didnt take effects

Hello.
we have two servers, at time of installation we didnt configured ADC+secondary Dns in our network, so these servers were configured with only DC and Primary DNS server IP. later on we built ADC with secondary DNS, now when we add ADC+secondary DNS
IP to these server it demands restart. and after restarting no changes made. means it didnt add the secondary dns ip.
Please advise

Hi,
Maybe you need to registry the secondary DNS server under Networks in the
Windows Azure management portal. In addition, it seems that you also need to add the secondary DNS server in the
DNS Servers and VPN Connectivity page.
More information:
Setup a Windows Server 2012 R2 Domain Controller in Windows Azure: IP Addressing and Creating a Virtual Network
Install a Replica Active Directory Domain Controller in Windows Azure Virtual Networks
In addition, according to the article below, it seems that you can use Powershell to make change in
.NETCFG files to achieve that.
Editing DNS in Windows Azure
Note: Microsoft is providing this information as a convenience to
you. The sites are not controlled by Microsoft. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie

Adding songs and editing info is VERY slow on brand new mac

Hello, I have a brand new macbook computer. I'm trying to add songs to my iTunes library, which is mostly empty at this point. As I try to add songs to iTunes, they take quite a bit of time to get added into iTunes. If I try to edit their info (through Get Info), it takes forever for the information to go through. I have my preferences set to organize my music library folder. I noticed that only songs that are in my iTunes Library folder take a long time to get added (so, adding music that's in a random folder on the computer and isn't in my organized library folder gets added to iTunes very quickly, but if I'm adding music that's going to get organized in my library folder, it's very slow.)
I don't remember it being this slow on my older macbook. Any ideas as to why this is going so slow? It's clearly not a RAM or size problem, since this is a brand new macbook.

Hi JGG,
Thank you for your reply. I forgot to mention that I house my iTunes library on an external drive. I understand that, of course, anything hosted off of my computer would be slower than if it was on my laptop, but this still seems much slower than it was on my older computers (where I also used an external to host the music). Also, I mentioned earlier that if I added music to iTunes that was in a random folder on the external, it would show up instantly on the playlist; but if I added music that was within my iTunes library-folder on the external, it would upload very slowly. Even after it's on the iTunes playlist and "organized" within the Library-folder with the correct titles/folder names, just editing a song (for example, to change the year) would take a long time as well.
Edit: And, I just realized, there is a big delay when I try to click on a song to play. The little spinning color wheel pops up for a few seconds every single time I click to play a new song out of my playlist. I'm sure that NEVER happened in the past on my old macbook when I also used an external drive.
Thanks for your help!
Message was edited by: LappyCat

Adding link to edit user personal data in Collaboration Launch Pad

HI Experts,
1. How to add a link for user to edit personal data
(General Data) in CLP.When i click a link it should display the user modification window. After modification it will save the data. what is the name of iview for this and where is this iview located in portal. How can i do this.
2. i have imported the PAR file "com.sap.netweaver.kmc.people.par" in to the NWDS & deploy it. After that i have created an User Details Iview, when i preview this iview it showing "Cannot identify the user. Make sure that the user mapping has been defined". what is the problem? please help me..
Regards,
Senthil K.

Hi Senthil, I am having the same problem. Can you let me know how you solved the issue.

Adding Video to Edit with

So heres the deal,
I have a 3gs and I am shooting little videos with my iphone, editing them and putting them online. I want to make a little intro graphic for my videos but cant get it to be editiable. this is what i get.
"was not copied to the iPhone "Ts iPhone" cause it cannot be played on this iPhone"
anyone know how i can get this to work? what format I need to make the video in, or how to put it into the folders that captured video goes into? I'm using ReelDirector to edit

Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats.
You can't transfer video or photos from your computer to your iPhone's Camera Roll via the iTunes sync process. Video and photos captured by your iPhone are stored in your iPhone's Camera Roll along with a photo saved from a received email or from a website.

How to add the recordings MX following ( GANDI) In the file of zone DNS ADOBE

the recording MX are
( Pop 10800 IN CNAME access.mail.gandi.net.
Webmail 10800 IN CNAME agent.mail.gandi.net.
Smtp 10800 IN CNAME relay.mail.gandi.net.
Imap 10800 IN CNAME access.mail.gandi.net.
10800 IN spool.mail.gandi.net MX 10. 1
0800 IN fb.mail.gandi.net MX 50. )
it's for keeping my gandi Mails instead of those of ADOBE catalyst all in changing my server from GANDI to ADOBE

Hi,
Once you have added your domain to your BC site and redelegated the domain to point to our name servers, you can add all these records from the admin panel in the site domain section. For more info on this, I'd suggest you to contact the BC support directly from Contact Customer Care
Regards,
Aish

Adding a non-editable area?

I'm certain that I once saw an example showing how a website
designer could add some code to a page to prevent Contribute users
from editing an area. I've looked in documentation for both
Dreamweaver and Conribute, but I can see no mention of it. I
actually use GoLive to build sites. Any help would be
appreciated.

You need to use Dreamweaver and generate a Dreamweaver
template file with editable and non-editable regions. I'm not aware
if GoLive has this feature and if its supported. (I think it
doesn't)

Script for adding zones on cisco9506

Hello,
I have some 50 zones to add to a zoneset.. is there any easy way like a script to use and push it..

Hello,
Please use this
Automatic Zone Set Distribution
To enable the switch to distribute the local zone set to all other switches in the VSAN when a zone set is activated, use the zone set distribute full vsan 804 command:
ca-9506# conf t
Enter configuration commands, one per line. End with CNTL/Z.
ca-9506(config)# zoneset distribute full vsan 804
also refer
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_3/cookbook/CB_zone.html

Adding "Photoshop" to "Edit With..." menu

Hello,
I use InDesign CS5 on Windows 7 x64. When I go into the Links panel and right click a linked image, I'd like to add "Photoshop" to the Edit With... menu.
Currently that list contains the options:
Acrobat
Flash
InDesign
Firefox
Word
Microsoft Photo Viewer
Now, I don't understand why such an obvious choice as Photoshop is not in the list. My "Edit Original" command is linked to Microsoft Photo Viewer by the OS. I don't want to change that association because when I browse a folder for photos (JPG) that I took with my camera or something rather, I want them to open in Windows Photo Viewer because it's very easy to go through them using the left/right arrow keys. I don't need every JPG to open up in Photoshop one by one. Therefore, I don't want to change the "Edit Original" command or its file association type.
I just want to add "Photoshop" to the "Edit With..." list. How can I do that - if at all?
Thanks
PS: It just completely doesn't make ANY sense why would InDesign, Firefox, Flash, listed in the "Edit With..." list but not Photoshop. I can't actually edit images in any of these programs. Common sense rules...

InDesign uses the file/program associations that are set in Windows. Windows stores a list of all the programs you've used to open a certain type of file.
Within Windows (e.g. Windows Explorer, on the desktop, etc.), if you right click on a file and chose "Open With" from the menu, the programs on the flyout menu will match the ones you see when you chose "Edit with" in InDesign.
You can add a program to the list by clicking "Choose default program" at the bottom of the flyout menu. Then locate the program you want to add to the list. If you don't want to change the program Windows automatically uses the open files of the type you selected (e.g. EPS files open with Illustrator by default when you double click them and you want to keep it that way, but you want to add Photoshop as an "Edit with" option for EPS files within InDesign), uncheck the box at the bottom that says "Always use the selected program to open this kind of file". When you go back to InDesign the program you used to open the file will now be included in the "Edit With" list.

Adding audio to edited video

Hey, I've been editing a short movie with premiere and I accidentally removed the audio from half the footage and can't restore it, all the auto save files saved it after I finished editing. All I want to do is get the audio from the edited video, as the video clips are there but the audio aren't, only in the original clip does it have the audio.
Thanks,
Josh

If the original clip stil has the audio, perhaps you could insert this on the end of your sequence. Unlink the audio, then delete the original clip and slide the unlinked audio back into the position you want it along the timeline.

Adding zone dns edit to firmware

Similar Messages

Maybe you are looking for