Adding ZTIWipeDisk.wsf after image capture for reference VM

Hi,
For the automation of the reference VMs I want to add a task to run the ZTIWipeDisk.wsf script after the image capture is complete. This is because the creation of VMs is too "complicated" in this particular customer environment, so I want
to wipe the disk to avoid the
“Press any key to boot from CD or DVD….” message from derailing the automation for reference image builds/updates.
I've added WipeDisk=TRUE in the customsettings.ini added a task at the end to run
ZTIWipeDisk.wsf, but it doesn't run, nor does anything get logged, so not sure if it's possible to achieve.
Has anyone tried this before?
Cheers,
Jeremy
Jeremy Saunders

Check the smsts.log file to confirm it was actually called.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

  • Problems with Image Capture for Epson Scanner

    When using image capture for my Epson scanner, at the Image Correction, when I select Manual I get no menu options.

    There is no Epson scanner utility for Mountain Lion, it appears. Even Epson's FAQ defers to Image Capture and says it only provides software for image modification.
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=207953&foid=214278&cat=214269&subcat=214264
    Unfortunately Image Capture completely fails to provide the service it should be expected to. The 3rd party software VueScan seems like it would be adequate once I learned how to manipulate it a little more, but ultimately the only decision I can justify is to hook up the scanner to my Windows PC and use the TWAIN-based scan utility there.
    If there's anywhere I can make an official plea to Apple to get Image Capture in a workable state, feel free to point the way.

  • TS1394 image capture for Snow Leopard

    Which version of Image Capture should be in Snow Leopard Mac OS-X 10.6.8
    When my wife attempts to run Image Capture 3.0.3 on her system (her Imac cannot be upgraded to Lion unfortunately)  is unable to run.
    The error message is:  You cannot use this version of the applciation Image Capture with this version of Mac OS-X.
    Is there anyone out there who knows which version should be on her system please.
    Raymond

    For 10.6.8, Image Capture is version 6.0.1
    What your going to need to do is backup personal data off the machine and disconnect the drive.
    Pull out the 10.6.3 disk used to upgrade from 10.5 with, there is a bundled installer for programs, run that and see if that will update Image Capture.
    If not then your going to need to hold c or option key down to boot from the disk and install 10.6.3 over itself, it also installs the bundled programs.
    Reboot and immediately Software Update until clear, that will update OSX and bundled software to current versions.
    Some third party software won't function after this, they will have to be reinstalled and updated.
    You might also have other issues with that machine
    Step by Step to fix your Mac

  • Canon users, try Image Capture for cameras

    I have seen a couple of threads that cameras don't work. Mine didn't... I have a 790is. Just use image capture that is in your applications folder.

    If you have CanoScan Toolbox X installed (provided with the Canon 9950 Scanner) go to Advanced option after clicking on either the Scan-1 or Scan-2 button. To do this, Click on Scan in the popup menu that results from activating either the Scan-1 or Scan-2 button. This should put you in the ScanGear CS screen. On the right is a vertical menu bar. Click on the Advanced Mode and then click on Select Source. This gives you options for negative scanning.
    I found using the masks supplied with the scanner is helpful keeping the image square on the screen after scanned image is transferred to

  • How to automatically crop images in Image Capture for import into iPhoto?

    On my PowerBook G4 / Mac OS X 10.4.2, I'm using the Image Capture 3.0.3 application to capture images coming from scanning photographs with a CanoScan 8400F.
    Can I get the Image Capture application to automatically set the crop frame on the overview? Other applications do that, but with Image Capture it seems that after I do the Overview (preview), I have to manually set the crop frame by clicking and dragging, before I can click the Scan button to do the scan?
    P.S. It seems that iPhoto does not handle scanning, and you do have to use a different application to scan photos before importing them into iPhoto.
    PowerBook G4   Mac OS X (10.4.2)  

    If you hide the details pane Image Capture will scan immediately to a specified folder. Other way is to open printers and faxing from the system preferences , select the scanning tab of your printer and click Open scanner. It will start scanning immediately without opening Image Capture. To set other software as default you should open Image Capture, select your printer/scanner and click the scanner buttons. It will then let you chose which program should be launched when you scan a document.

  • How do I find lost photos after Image Capture failed to import them to iPhoto?

    im having this problem exactly .... http://hints.macworld.com/article.php?story=20101215095521610
    i chose to delete after import, like a wise guy, thinking nothing was going to happen and now my photos are not in my iPhoto libary... ive gone through all my images and i cant find them...
    i used image capture to put all my photos into iphoto from my iphone 4 before i bought my 4S and i didnt back anything up, thinking i was fine...
    when i went to iphoto they werent there, so i tried to quit iphoto and, as i did, it said my library was updating about 300+ photos, so i was like 'oh all i needed to do was restart iphoto'... but it was still a no-go, they still werent there...
    i restarted my computer, looked at other peoples answers, and i just cant find them in any folder or anywhere....... and i cant find the folder from the link i posted... very tired and fustrated. i need help please : (

    I don't think it can be done from within iPhoto but there's a way you can do it from outside. First download and launch QPict. Then do the following;
    1 - open your iPhoto Library folder and type Command-F.
    2 - in the search window create these two search criteria:
    a - Kind is Folder
    b - Name contains Original
    3 - In the search results window click on the size column to separate the empty folders from those with files in them.
    4 - select all of the folder that are not empty and drag into the open window of QPict.
    That will open the original files in QPict so you can view them there and compare to those in iPhoto. Just remember do not move any of those folders out of the iPhoto Library folder. Just move them into the open window of QPict.
    G4 DP-1G, 1G RAM, 22 Display, 2-80G HD, QT 7.0.3P   Mac OS X (10.4.3)   Canon S400, i850 & LIDE 50, Epson R200, 2G Nano

  • Image Capture for Epson Scanner producing very dark results

    I recently upgraded to a new iMac running Mountain Lion. I have a new Epson Perfection v750 Pro scanner, which I use to scan film negatives. I had previously been working with this scanner on a Windows 7 PC. Using Image Capture, I am getting wildly different results -- the resulting scan is completely dark. Is there a setting that I am missing somewhere?
    I've attached a little preview picture that shows the difference between a scan of the same image, with my PC vs my Mac.

    There is no Epson scanner utility for Mountain Lion, it appears. Even Epson's FAQ defers to Image Capture and says it only provides software for image modification.
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=207953&foid=214278&cat=214269&subcat=214264
    Unfortunately Image Capture completely fails to provide the service it should be expected to. The 3rd party software VueScan seems like it would be adequate once I learned how to manipulate it a little more, but ultimately the only decision I can justify is to hook up the scanner to my Windows PC and use the TWAIN-based scan utility there.
    If there's anywhere I can make an official plea to Apple to get Image Capture in a workable state, feel free to point the way.

  • Adding old scanner where Image Capture will see it

    I have an CanoScan N1220U flatbed scanner. Canon does not have driver software for this scanner for Intel Macs. I have downloaded a plugin for the scanner that was written for Power PC system X Macs, and I've put it in Photoshop's plugins folder. I can use it to scan with Photoshop provided I run PS in Rosetta mode. Is there some place in the system where I can put another copy of that driver (it's not a TWAIN driver) so that Image Capture will see it and use it? If so, will I have to run Image Capture in Rosetta mode, or can it automatically deal with parts in Rosetta mode, as some programs allegedly can?

    Your 1220 was designed when the Mac was system 7, running at 40 Mhz. and a large hard drive was anything over 150 MB. If you are scanning paper, buy a new epson all in one. I trashed my D660U canoscan because it took forever with very limited internal memory. can you spell recycle?
    ~(:O)~ ARTEE

  • Stop Image Capture for iPhone?

    I know I can stop Image Capture opening for all devices but is there any way of stopping it open when I connect just my iPhone? I find it useful opening up when I attach a camera but not my iPhone. I'm presuming not but just thought I'd ask.

    that would be a nice feature, apple should take that as a feature request.
    i wouldn't even need an option to configure all cameras, just two switches to configure launching image capture on/off when an iphone is connected, and when a photo camera (or cardreader with compact flash card etc.) is connected.

  • Image Capturing for DnD via Robot

    Ladies n Gents
    I am attempting to enhance the drag and drop functionality of a certain jtable. Most of it works quite nicely, except, when I drag a row with no data; the image of the component physically under the jtable is captured and not of the row.
    For example, if the jtable appears on top of jbuilder, when I attempt to drag a empty row (row with no data), a portion of Jbuilder is captured.
    Is there a way to eliminate this unwanted behaviour? A related question may be, is there a way to capture a portion of the screen without using the robot class?
    Any links, ideas, suggestions are appreciated.
    Cheers

    thanks again for all the contributions.
    The beta player is a SONY BVW-75P.(http://www.videoplusfrance.com/fiche_location/134/magnetoscope--betacam-sp.htm)
    The video outputs i have at the back are:
    _1
    _2 (COMP/NON COMP)
    _3 (SUPER)
    _Ref Video
    _component 2 (Y/R-Y/B-Y)
    All of these are bnc outputs.
    I also have one dub/component 1 output.
    Audio is coming out of channel 1 and 2 of the audio output via xlr/rca adapters.
    I've started dubbing directly to DVCAM tapes because i still can't get the non-controlable device capture to work.
    i've looked as you suggested for an s-video output but can't find one on the deck. So right now video is outputting to the dsr through "Video output 1" with a BNC/RCA adapter.
    The dsr is set to video.
    As far as the beta deck settings go, i have
    TBC control set to local.
    TBC - bypass
    Video input - auto
    Rec inhibit - on
    Capstaan lock - 2fd
    Input select - composite
    The firewire works with the dsr no problem. I can capture the DV tape is just dubbed with no trouble.
    But just still can't capture now directly from the betasp deckk.
    cheers,
    tee.

  • Image capture for Imovie

    I'm looking for a tool to capture video from the net and allow me to edit
    it in Imovie. I've heard about flip 4 Mac, and Quicktime pro but I haven't tried them 'cause I'm a bit jaded. I'm not opposed to spending a little $ if the solution really works.
    And.....I was wondering about an audio microphone for Mac. In voiceover, the built-in mic produces a quasi-cheesy sound quality. Any suggestions?

    I'm looking for a tool to capture video from the net and allow me to edit
    it in Imovie.
    ... ehm, well not easy to answer... unluckily, there's no universal web-video format... actual counting: >4000 (read:fourthousand) codecs "available"…
    sooo, what are the usual suspects?
    * QTpro handles the most "usual" on the web and the latest, e.g. as h264…
    * for conversion of mpegs WITHOUT loss of audio, you use the free tool Streamclip
    * wmv is popular in the PC world, flip4mac handles that.. (mostly… there are many wmv-flavors…)
    * divx/ 3vix / xvid … need additional plug-ins..
    * to convert .flv (as on youtube.com), you could use for free iSquint
    * … for some other you get plug-ins....
    … if no plug-in work, Plan B) is a screen recorder as SnapzPro , but tricky to handle, because you never "catch" the right size => another conversion step => loss of pic quality…-
    I would still have to convert any clips to a format compatible with IMovie? What format is that?
    sure, iMovie is no all-purpose-all-kind-of-file-edit app... , iMovie is a video edit app meant to work with firewire connected miniDV camcorders, so any content HAS to be "dv"…
    sorry for long post, but video from the net is no trivial issue...
    helpful?

  • I built an application to store de front panel of vi in a JPEG image file, but native labels of controls and indicator are unclear after image capture, some one knows why? I have a working example you can test.

    For some label colors like yellow or green, this defect is almost invisible, but for black color or any dark tone like brown or dark gray after file creation appears unclear labels.

    In more details, JPEG uses lossy compression and is not really suitable for cartoon-like pictures with objects containing high-contrast sharp features such as lines and boxes (as found in front panels). This has to do with the truncation in the 2D cosine transforms which gives you weak ripples near sharp edges, not visible in typical photographs.
    Of course you could set the quality to 100% (optional input) for no truncation with a trade-off of larger files, but it's pretty pointless. JPEG is only meant to be used for photographs.
    PNG is a fantastic format (intended as a GIF replacement), uses lossless compression, and wins in all aspects over jpeg for your intended use. All modern applications can deal with them (e.g. you can insert them into word or powerpo
    int) and any modern browser can display them. (see e.g. the PNG home site for more info).
    LabVIEW Champion . Do more with less code and in less time .

  • Image capture for web-browsers out-of-the-box -- really no hopes?

    Hi all,
    I planned to extend user's interface for my web2.0 app with a webcam. It looks for me like JMF is the only framework, which promises a multiplatform usage for web-surfers. Therefore, I tried some JMF code and some JMF samples already. However it looks for me now like one should rather forget about the installers providing an "out-of-the-box webcam support ready for housewives". I'd wish i am wrong.
    Would you believe one can really make a simple installer enabling browsers like firefox, ie, safari and opera to upload a webcam snapshot by a single mouse click?
    Thank you for your hints and comments,
    have a nice day,
    Valery.

    hi cat2014,
    Welcome to the forums and sorry to hear about your sound trouble.
    To check what's going on, can you provide these additional info:
    1. What's the model of your lenovo unit (eg. Y50-70)
    2. When you play a music file (ie. iTunes or YouTube), is the volume fluctuating but there's no sound comming from the built-in speakers?
       - Link to picture
    If the speakers are enabled and the volume is fluctuating, this means that the sound adapter is okay and there's most likely a problem with the speakers. To check, try to:
      a. Use an earphone or an external speaker and observe if you can hear a sound
      b. Press the Windows Key +X and choose Device Manager. On the Device Manager window, navigate to Sound, video and game controllers and uninstall the sound adapter (ensure that you delete the device driver). When finished, do a scan for hardware changes. Windows will now use a generic sound driver and observe if you can how hear a sound from the built-in speakers
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to covert before and after image details from logdump to SQL

    Hi,
    Through logdump,i am able to retrieve below before and after image details for an update statement.
    Instead of below ascii format output, i need to know the complete sql statement before update and after update.
    Is there any command to covert below output to readable SQL sentence?
    2012/09/26 02:30:16.999.659 FieldComp Len 300 RBA 2528
    Name: TEST.TESTTABLE
    Before Image: Partition 4 GU m
    5e50 86f5 af70 9660 b6fa 785c e34f 8881 0497 9507 | ^P...p.`..x\.O......
    799f 2ee2 6399 d539 ea92 90de 828b 83d9 adc9 c8c4 | y...c..9............
    ca87 9632 7136 a5fc 826f 8cc7 6ddd 7f8a e02e 816a | ...2q6...o..m......j
    6ac4 739a 8011 5068 068a 4553 4937 93e7 cc5a d3d3 | j.s...Ph..ESI7...Z..
    6a2b 2540 3be9 1df7 6d0c 0f17 d795 efd4 e0c5 dae9 | j+%@;...m...........
    a488 a757 7c07 78a4 5f2a 1330 d2bb 5a05 7075 6b95 | ...W|.x._*.0..Z.puk.
    529c f681 97d8 df6f 58d5 37dc e36d 8bc0 19d5 c7f0 | R......oX.7..m......
    Bad compressed block, found length of 34549 (x86f5), RBA 2528
    Logdump 2335 >n
    Hdr-Ind : E (x45) Partition : . (x04)
    UndoFlag : . (x00) BeforeAfter: A (x41)
    RecLength : 300 (x012c) IO Time : 2012/09/26 02:30:16.999.659
    IOType : 15 (x0f) OrigNode : 255 (xff)
    TransInd : . (x01) FormatType : R (x52)
    SyskeyLen : 0 (x00) Incomplete : . (x00)
    AuditRBA : 24567 AuditPos : 4268948
    Continued : N (x00) RecCount : 1 (x01)
    2012/09/26 02:30:16.999.659 FieldComp Len 300 RBA 2947
    Name: TEST.TESTTABLE
    After Image: Partition 4 GU m
    5e50 86f5 af70 9660 b6fa 785c e34f 8881 0497 9507 | ^P...p.`..x\.O......
    799f 2ee2 6399 d539 ea92 90de 828b 83d9 adc9 c8c4 | y...c..9............
    ca87 9632 7136 a5fc 826f 8cc7 6ddd 7f8a e02e 816a | ...2q6...o..m......j
    6ac4 739a 8011 5068 068a 4553 4937 93e7 cc5a d3d3 | j.s...Ph..ESI7...Z..
    6a2b 2540 3be9 1df7 6d0c 0f17 d795 efd4 e0c5 dae9 | j+%@;...m...........
    a488 a757 7c07 78a4 5f2a 1330 d2bd 5a05 7075 6b95 | ...W|.x._*.0..Z.puk.
    529c f681 97d8 df6f 58d5 37dc e36d e8b8 19d5 1af0 | R......oX.7..m......
    Bad compressed block, found length of 34549 (x86f5), RBA 2947

    From the reference guide:
    *FORMATSQL*
    Valid for Extract
    Use the FORMATSQLparameter to output data in external SQL format, instead of the default
    Oracle GoldenGate canonical format. FORMATSQLgenerates SQLstatements (INSERT, UPDATE,
    DELETE) that can be applied to both SQLand Enscribe tables by utilities other than Oracle
    GoldenGate Replicat.
    NOTE Do not use FORMATSQL if the data will be processed by the Replicat process.
    Replicat expects the default canonical format. Do not use FORMATSQLif
    FORMATASCIIor FORMATXMLis being used.
    A FORMATSQL statement affects all extract files or trails defined after it.
    Default output
    Without options, FORMATSQLtransactions are output as follows, in comma-delimited format:
    ● The begin-transaction indicator, B.
    ● The timestamp at which the transaction was committed.
    ● The sequence number of the transaction log in which the commit was found.
    ● The relative byte address (RBA) of the commit record within the transaction log.
    ● The SQL statements.
    ● The commit indicator, C.
    ● A newline indicator.
    Every record in a transaction is contained between the begin and commit indicators. Each
    combination of commit timestamp and RBA isunique. You can customize the output
    format with optional arguments.
    Default See “Default output”
    Syntax FORMATSQL [<option>] [, ...]

  • Image Capture Problems with Snow Leopard

    Somewhere along the line I seem to have upgraded my version of image capture. I've recently installed snow leopard and any software updates that have followed. I tried to use image capture for the first time yesterday, and after struggling to get it to work (unsuccessfully) I decided I preferred the previous version and went ahead and restored it from my time machine drive in place of the new version.
    I soon realised that this wouldn't work with the updated OS, and upon trying to restore the newer version of IC realised that I didn't have a copy of it on my time machine drive. I know this is a rookie error!
    Can anyone tell me where the new version of IC has come in, and if I can download it as part of a software update etc? I've tried reinstalling parts of Snow Leopard from disc hoping it would be in there, but so far I've had no success.
    Thanks in advance.

    Having the same issue since 10.6.4; none of my 3 scanners work: canon LIDE 60, Epson CX5000 or HP 4215.
    The Epson gets the furthest with a partially garbled 'overview' scan which never completes... the others never even start scanning although Image Capture says it is making an overview.
    I have already installed the updated Epson driver, but not the others... will go hunting, but this really *****. Need to scan and distribute 3 1-page documents and it has so far taken me 3 hours.

Maybe you are looking for