Addition DC can not operational when Primary DC down

Dear All
My system using Primary DC and Additional DC, both server runing window server 2008 R2.
when primary DC down. I had reboot Additional DC Server after I access to Active Directory User and Computer, appears error
" Naming information cannot be located for the following reason:
The server is not operational.
If you are trying to connect to a domain controller running Windows 2000,
verify that Windows 2000 Server Service Pack 3 or later is installed on the
DC, or use the Windows 2000 administration tools. For more
information about connecting to domain controllers running Windows 2000, see
Help & Support. "
Please help me fix it
Thanks so much

Hi
I have change domain controller in Active Directory User and Computer and
I can access to Active Directory User and Computer in Additonal DC
Thanks so much !

Similar Messages

Can't use Find My Friends on iPhone due to Apple ID not being verified. Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!

Can't use Find My Friends on iPhone due to Apple ID not being verified.
Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!
So my options are:
Create a new Apple ID, use that and lose all the apps I've purhcased with it (a fairly substantial amount)
Somehow Migrate these purchases over to a new Apple ID
Apple let me change the primary ID for the account
Anyone else ran into this before?
I've tried accessing the mail through a mail application using the correct server information, and trying both the old 6 character password and the one I had to change it too after they updated the security guidelines - neither work.
Help would be greatly appreciated as I can see more services down the line not working without the address being verified!

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.

Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please.

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please. ?

Are you away from your home country?
Settings > General > International > Region Format > set to correct location?
Settings > Phone > Dial Assist > ON

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turn

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turned on off iPad and iPhone but neither will set up, I have given up and forwarded all new emails from hotmail to icloud until I sort this out. Please help it's doing my brain in!!!! Thanks

You need to turn off find my ipad in settings
Then restore to factory settings ipad will then be
as new then enter you Apple ID and password
bsydd uk

Help, I can not quit safari or shut down my computer since updating to Lion.

Can some one help?
Since updating to Lion, I can not quit Safari or shut down my computer.

Several ways to force quit when you can't quit an app normally.
Go to your Apple menu (top left in your screen) then from the drop down menu select Force Quit.
You can also force quit an app using the Activity Monitor app located in /Applications/Utilities.
You should be able to shut down your Mac by holiding down the power button until the screen goes black. Then restart as usual.

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Why do my notifications not show when I swipe down anymore?

please tell me how to re-start my notifications they are not available when I swipe down from the top of the screen

Hi kellygreenthumb,
If you are having an issue with Notifications not being available on your iPhone, I would suggest that you troubleshoot using the steps in this article -
Understanding notifications on iPhone, iPad, and iPod touch - Apple Support
The section most relevant is -
Get help
Push notifications require an active Wi-Fi or cellular connection.
Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
If you're not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
Thanks for using Apple Support Communities.
Best,
Brett L

How can I verify my iCloud account if I can not access the primary email account associated with my Apple ID?

The email address I had set for my Apple ID when I had originally signed up was through my college. I have been out of college now for a few years and the email account has been deleted. I was trying to set up iCloud on my iPad and iPhone but it says I need to access the account to verify through email. I have tried to change my Apple ID email to my current email address but it tells me I can not do this either because that email is set up as my rescue email. How can I change my primary email address for my Apple ID or get my iCloud verified in this situation I'm in?

Go to http://appleid.apple.com and click 'Manage your account'. You will be able to change the non-Apple email address you use as a login. You will then need to log out and in again on all your devices.

Activity can not post when do confirmation

Dear Gurus!
I have an issue now, when I do confirmation for production order. But some order can post actvity(in CO03 -> Cost analisys -> Activity actual) but some can not.
Do I miss any steps? I use BAPI to create comfirmation.
Regards,
Tony

It is hard to guess some reason, you should carry out some comparative study between the production orders that are displaying this different behaviour. There are many factors to be considered....
1) The production orders are for the same material or different materials? If different, then check routings....
2) Use the same work centers or activity types....
3) Belongs to the same cost center ?
4) the operation is really confirmed but no values for activities ( chack if the problem is quantity , i.e. hours, or currency, based on the price od each activity type)
5) Check prices for activities in KP27....
and so on...

The additive cost can not display on the work order plan cost

dear friends
first i run the ck74n for the additive cost ,second i run the ck11n for cost estimate ,i can see that the additive cost update to the standard cost successfully ,at last i run the ck24 mark and release the standard cost,but when i raise a work order ,i can not see the additive cost in the plan cost ,i do not know the reason ,do you have some suggestion
thanks

Hi
This behaviour is expected and standard...
In Std cost estimate, you have the option of inputting components manually in CK74N... But the actual costs in Prod order will come either from Material issues/Activity Confirmations or manual postings from FI... There is no option to enter additive costs in actuals.. Hence, there is no option of "additive costs" in the Planned costng variant of Prod order
If you enter any additive costs in CK11N, It is done because you cant estimate it through Qty Structure.. But, during actuals, the actual costs are all available through Material issues/Activity Confirmations.. hence, the additive costs does not apply here
BR,Ajay M

Captivate TOC navigate visited slide only problem. Visited topic can not click when exit and open again the training.

Hi,
I have created the TOC and i want the learner just can click at the Topic they have visited. i have no problem at the first time viewing the training.
The problem is i read half of the training, for example I have Topic 1 - Topic 5, I just read until Topic 3 finish, then I exit the training. When i reenter the training, the Topic 1 - Topic 3 which i have already visited can not click, I can not review back those topic. At the TOC setting, I have enabled the Self-Paced Learning, Enabled Navigation, Navigate Visited Slides Only.
Is there any other setting I need to enable to make the learner can click at the topic they have visited when they exit and reopen the training?
Thanks,
Chee SK

I don't think you are understanding what I'm saying.
If you are using an LMS then the bookmarking you are currently using MUST be Resume Data bookmarking. It's the ONLY kind Captivate has that will work with LMSs.
If you are unable to navigate to a visited topic after resuming from the LMS then it's possible you've got some other setting in your project that is interferring with that navigation. For example, if you have NOT allowed Backward Movement in your Quiz Settings, then under certain circumstances that will mean you cannot navigate because resuming the lesson dumps you somewhere in the middle of the quiz and you're not allowed (by the settings) to go to an earlier slide.
Is that what you are seeing?

Agent and TNSListener service can not run when system starting

The Agent and TNSListener services can not run automaticaly when system startes.If run Agent service by hand in control panel,system prompt 3221356559 error message.If run TNSListener service in control panel,system prompt none.But after refresh,TNSListener service is not running.How can i do next?Thanks very much!

geno.nullfree wrote:
I'm not sure but since it's saying there's a library issue, you could try running:
# ldconfig
Failing that you could try a:
# pacman -Rns slim
# pacman -Syu slim
I tried both "ldconfig" and "pacman -XXX", but the problem is still there.
Maybe I need use another way to recompile slim in my machine.
But I have no time to test it now, I will try it another day.
Thx for replies.

Installer can not initialising when i setup starting of photoshop CS6

When i start the setup of Photoshop ,there is a interupt and
a messsage is " Installer can not inizialising " ?!
what can i do ?
My system is win 8.1 64bit
leothon

Not following you, Leothon. Sorry. Would you care to elaborate and to give more detailed information?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Can not reconnect when restoring files

Need help here. I had a computer crash, and installed my adobe Photoshop element
s 8 again. Used the "restore" function to restore all my pictures with tags, and restored them to my computer - everything ok so far
. Problem is the PSE says I need to reconnect about half my photos
- Photoshop can not find them, and does not display them either. I have checked, and all photos are present on
my external harddisk that i have restored the files from.
Help...

I have moved them from the backup and back onto my computer. Half the pictures gives me no problem, but for some reason the other half does not copy over to the new location (I am restoring the whole catalog with all my pictures). The tags are there, but the picture itself is not.
Going into the backup file, I can see all my pictures, but when going onto my computer after restoring the entire catalog, I see the pictures are missing. Guess it is wrong to say it is a reconnection problem, as the pictures actually does not get "transferred" over to my computer.
Example: From 2007 I am missing probably 1000 pictures, but I have 20 from one specific event... This means I can see no reason why some of the pictures will simply not copy over. I have tried several times, but with the same result...
Would appreciate advice...

Addition DC can not operational when Primary DC down

Similar Messages

Maybe you are looking for