Addition of a language font in task list

Hi all,
i have this requirement wherein the PM checklist is given to group of people who doesnt know English and the checklist is in marathi,(language of Maharastra-part of India)
requirement is same is to be shown in SAP.
Is there any possibility?
Right now in thier PC they are having a Shivaji Font by which they are able to typein Marathi.
May be it is not possible but brain storming will be appreaciated.

The real issue is one of SAP support code-page. I don't think that Marathi - despite being used by over 60 - 70 million people on this planet - is a language, whose code-page (fonts etc) is supported by SAP. You can confirm using note 73606
From Creating a new custom language code?
In a Non-Unicode system, SAP notes 112065 and 302063 describe possibilities to use additional language keys.
In a Unicode system, SAP note 73606 (attachment supportedlanguages2.xls) shows all supported language keys.

Similar Messages

Additional User Defined field in Maintenance Task List

I wan to add an additional field user field in Maintenance Task List.
I know It is possible in User Fields.
But I an not able added user field to Operations that are already there in the maintenance plan.
The system is allowing me to Add field in New Operations that I am adding the the Task List.
Thanks
Sabyasachi

Hi,
If I am correct, It is not possible to add user fileds to the operations in the maintenance plan which was copied from the tasklist which is there in the maintenance plan.
if you required these user fileds goto to change mode in maintenance plan and remove the task list in plan and do necessary changes in the task list and add to plan again. After that you can get userfileds in the opeations as u required with was generated now onwards. It is not possible for the past ones.
Regards
Srinivas

SmartView Task List not opening FR report

I am trying to open FR report from a Task List task in SmartView (using Planning provider). If I am already logged into my Planning application in browser, the report opens. But if I am not logged (e.g., browser is closed), an empty page opens in browser, and at the bottom is status "Done" but with the error icon.
Is there a way (URL format) that would enable user to open report from SmartView Task List without having to log to Web client first?
Environment: EPM 11.1.2.3.500, FRS 11.1.2.3.503.0917, browser: IE 8, Excel: Office Professional Plus 2010
Thanks,
M. Sladic

Celvin, Ramkumar, thanks for your suggestions. My colleague, Soumyajit, discovered that the original method (URL) needed to be replaced.
Here is the original URL we used (this one was opening report twice on first open, and didn't open report from SmartView unless user was already logged to Workspace):
** https://i<server>/workspace/WorkspaceLaunch.jsp?uri=module%3Dwksp.relatedcontent%26repository_path%3D%2FReports%2FStatement%2520of%2520Financial%2520Statement%2520-%2520Expandable
Instead the right call is:
https://<server>/workspace/index.jsp?module=tools.relatedcontent&repository_path=%2FReports%2FFinancial%20Statement%20-%20Expandable
Using this other URL, the report:
- when open from the Tasks List, opens only once even the first time;
- opens in Workspace without additional login when opened from the Task List in SmartView
Note: We are using variant of OAM, maybe that has some impact to it. Not my area of expertise, though...
HTH,
Milos

Strategy Plan with task list

Hi all,
can any one help me?
I create a strategy plan with one maintenance item and one task list, with one task list item, for example. After scheduling I get a maintenance order with two items. One item from the task list and one from the maintenance item and it´s necessary to confirm both order items.
It´s possible to create a maintenance order with only items from the task list?
Thank you for your support
Detlev

Detlev,
The PM/CS Order operations should only come from the task list that is assigned to the maintenance item.
If you are getting additional operations than are on the task list then its possible that you have:
- a system bug
- developed some new functionality
PeteA

Font size chnage in Long text of PM Task list

Hi PM gurus,
I need to change the 'font size' of the charecters in the 'long text ' of PM task list as complete task list print can come in one paper.I tried by reducing the size of sheet from 100% to 75%. But once it saved and agian reopens it appears in 100%, How can I fix in 75% size. please guide me .
Thanks in advance
GMR

GMR,
Those are automatically set based on screen size i think.Have you looked at the standard print output generated using transaction IA17? If that doesn't satisfy your needs you may have to create a custom print form wherein you should be able to control the font size and other details.
Regards
Narasimhan

How to enter second short text description language in task list header

Hi,
I can't find how to maintain second description language in task list header,
Does some know how to do it (I have searched in Go TO menu - but haven't found anything useful there).
Daniel Gontar

Tasklist in Different languages
PeteA

PM:Task list Component addition

Hello Guys,
We are facing below issue.
1. In task list component screen, if we add a component via Direct entry, system create Standard BOM.
2. If we add the component via component selection from BOM, it creates the material BOM.
The second method is preferable as changes in BOM is reflected in task list as the link is maintained. This is not an issue if we are creating task list manually as we can select the component manually. But however, if we create task list via LSMW or load program, the issue arises.
When contacted SAP on OSS, SAP advised to use BADI IMRM_COMP_PROCESSING, method SET_COMP_PROCESSING with
E_CORRECTION_ACTIVE = ' '. This seems to resolve the issue. But I am not sure of the side effects.
Has any one implemented this BADI earlier and can share the experience?
Thanks
Ashish Barsagade

hi,
U can assign material BOM in Tasklist header... there is a Assembly field... just enter the name of Material BOM. and Material BOM would be attatched to task list.
it will solve ur problem
Regards,
Amit kushwaha
Edited by: amit kushwaha on Feb 25, 2008 10:45 AM

I have two lists. The first is "Tasks", second is "Journal". I need a "Create Journal Entry" link in the Tasks list. How do I do that?

Let's say I have a Task named "Build SSIS for Duke Energy" and it has another column called Active. Now every day I look at my task list and If I worked on that task I want to create a Journal entry of what I have done. So from the Task
list I'd like a third column that calls the "Journal Entry" list's new form page and pass it in the ID of the task. I have found several TextToHtml scripts out there, but they have to be stored in a script library, and then sourced to a content
editor web part. The problem is they don't fire when I have my list grouped. In addition to, every time someone creates a new view, I have to go in and add the Content Editor web part, point to the script....
Any thoughts. It is the grouped view that really bug me.

Hi,
If you only want to add a hyperlink to create a Journal entry in the task list, I recommend to add a Hyperlink column in the task list and then create workflow to update the column.
You can follow the steps as below:
Open the task list, add a hyperlink column named Create Journal Entry.
Create a workflow associated to the task list, start the workflow automatically when an item is created.
Add actions as below:
Then when a task is created in the task list, the workflow will be stared automatically to update the “Create Journal Entry” column.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

SharePoint Provider Hosted App that can update existing SharePoint Task List

Note: I am unable to take advantage of the Microsoft.SharePoint library directly. Adding a reference results in a 32bit/64bit library mismatch error.
I have to find a solution that uses only the Microsoft.SharePoint.Client extension.
I am looking for example code where provider-hosted SharePoint App loads a SharePoint Task List View that allows users to interact with the tasks.
So far I have only been able to programmatically create and then load the SharePoint tasks list, create and populate a DataTable object and set the datasource of a GridView object to that DataTable.
I am unable to trigger my method linked to my checkbox within the gridview.
Ideally I would like to just customize a Task View that already has this functionality.
Here is my default.aspx.cs code-behind file:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Data;
using SP = Microsoft.SharePoint.Client;
namespace SPAppBasicWeb
public partial class Default : System.Web.UI.Page
protected void Page_PreInit(object sender, EventArgs e)
Uri redirectUrl;
switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
case RedirectionStatus.Ok:
return;
case RedirectionStatus.ShouldRedirect:
Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
break;
case RedirectionStatus.CanNotRedirect:
Response.Write("An error occurred while processing your request.");
Response.End();
break;
protected void Page_Load(object sender, EventArgs e)
// The following code gets the client context and Title property by using TokenHelper.
// To access other properties, the app may need to request permissions on the host web.
var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
using (var clientContext = spContext.CreateUserClientContextForSPHost())
//clientContext.Load(clientContext.Web, web => web.Title);
//clientContext.ExecuteQuery();
//Response.Write(clientContext.Web.Title);
SP.ClientContext cc = new SP.ClientContext("http://server/sites/devapps");
SP.Web web = cc.Web;
SP.List list = web.Lists.GetByTitle("General Tasks");
SP.CamlQuery caml = new SP.CamlQuery();
Microsoft.SharePoint.Client.ListItemCollection items = list.GetItems(caml);
cc.Load<Microsoft.SharePoint.Client.List>(list);
cc.Load<Microsoft.SharePoint.Client.ListItemCollection>(items);
//try
//const int ColWidth = 40;
cc.ExecuteQuery();
DataTable dt = new DataTable();
dt.Columns.Add("Task Name", typeof(string));
dt.Columns.Add("ID", typeof(int));
foreach (Microsoft.SharePoint.Client.ListItem liTask in items)
DataRow dr = dt.NewRow();
dr["Task Name"] = liTask["Title"];
dr["ID"] = liTask["ID"];
//dr["chkTask"] = liTask["Checkmark"];
dt.Rows.Add(dr);
GridView1.DataSource = dt;
GridView1.DataBind();
protected void chkTask_CheckedChanged(object sender, EventArgs e)
//add code here to update Task Item by ID
Response.Write("checkbox event triggered");
Here is my simple default.aspx:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="SPAppBasicWeb.Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView ID="GridView1" runat="server">
<Columns>
<asp:TemplateField>
<ItemTemplate>
<asp:CheckBox ID="chkTask" runat="server" OnCheckedChanged="chkTask_CheckedChanged" AutoPostBack="true" />
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
</div>
</form>
</body>
</html>
http://www.net4geeks.com Who said I was a geek?

Hi,
Please try to modify your code as below:
using (var clientContext = spContext.CreateUserClientContextForSPHost())
SP.Web web = clientContext.Web;
SP.List list = web.Lists.GetByTitle("General Tasks");
SP.CamlQuery caml = new SP.CamlQuery();
Microsoft.SharePoint.Client.ListItemCollection items = list.GetItems(caml);
clientContext.Load(items);
clientContext.ExecuteQuery();
If the code still not works, I suggest you debug the code or following the blog below to create a Provider-Hosted App for SharePoint and read list items from SharePoint list.
http://blogs.msdn.com/b/steve_fox/archive/2013/02/22/building-your-first-provider-hosted-app-for-sharepoint-part-2.aspx
Best Regards
Dennis Guo
TechNet Community Support

Korean Language Fonts?

I recently composed a notice in Word2007, used Acrobat 9 to convert to PDF and posted the file on my webpage. This is not the first time I have done this, but this time about 5 of my visitors have emailed me to complain that they get a notification that "Korean language fonts need to be installed for this document to display properly", or words to that effect. When I check from my desk (Win 7/Firefox 3) I see no notice. From my son's laptop (Win XP/Firefox 3), I get the notice, accompanied by a "Download Now" button. Visitors using Safari and Int Explorer get the notice but no download option, just a blank file.
This is a new quirk - where is the need for Korean fonts coming from? The document is in English. How do I make this document accessible for all visitors? The "Document > Properties" windows shows nothing about non-English or other unusual fonts.

I just realized that all the fonts listed are ANSI-encoded, except ArielUnicodeMS, which is encoded as "KSCms-UHC-H" whatever the heck that is. Might this appear to Acrobat as a foreign font?

LSMW IBIP Unable to upload the PM operation task list

Dear Experts,
I'm trying to use LSMW to upload Equipment (PM) task list.
I succeed in creating the Header of the task list, but not the operations.
I have created 2 new structures :ZIBIPTLST and ZIBIPTLOP
Source structure is : ZIBIPTLST
u2026u2026u2026u2026u2026 ZIBIPTLOP
Structure relation is :
IBIPTLST    <<<<= ZIBIPTLST
u2026u2026u2026u2026..IBIPTLOP <<<<= ZIBIPTLOP
Field Mapping :
IBIPTLST
TCODE
RECORDNAME
EQUNR     (Equipment number)
PLNNR     (Key for task list group)
PLNAL     (Group Counter)
u2026.
u2026u2026u2026u2026u2026u2026u2026u2026u2026..
IBIPTLOP
TCODE
RECORDNAME
VORNR     (Operation)
ARBPL           (work center)
u2026
Unfortunately, they sre no common fields between IBIPTLST and IBIPTLOP, as you could have between PLKO and PLPO.
I have found an answer about the same issue, explaining that you can add in the structure ZIBIPTLOP , additional fields manually in the Souce field maintenance (adding EQUNR, PLNNR, PLNALu2026).
But then , i have no idea where to make the link between these new fields and the same fields of IBIPTLST.
Can you help, and tell me how to structure my files and my LSMW in order to achieve the creation of the Task list Header and Operation in the same Batch input.
PS :in LSMW, i have created two flat files , one for the header and one for the operation.
Thanks a lot, your detailed answer will be very appreciated !!
Jean-Louis

Hi,
As you said, u will have to add the equipment and group counter id field in IBIPTLOP structure. U also need to identify the two structures with different ID, say header structure ID is 1 and Operation structure ID is 2. Go to step Maintain Source Field, double click on field SID which is created to enter the header and operation data identifier. In identifying field content, enter identifier as 1 for header SID and 2 for operation SID.
You will have to maintain the SID identifier in you data template as well, so that LSMW can easily identify header and operation data.
Below given is how you can create field data.
ZIA01HEADER - Equipment Task List -Header Structure
SID                      SID Header
EQUNR                    Equipment Number
PLNAL                    Group Counter
KTEXT                    Description
ARBPL                    Work center
WERKS                    Maintenance Planning Plant
VERWE                    Usage
VAGRP                    Planner Group
STATU                    Status
STRAT                    Maintenance strategy
ANLZU                    Syst.Condition
STTAG                    Key Date
ZIA01OPERATION - Equipment Task List -Operation Structure
SID                      SID Operation
EQUNR                    Equipment Number
PLNAL                    Group Counter
VORNR                    Operation/Activity Number
UVORN                    Suboperation
ARBPL                    Work center
STEUS                    Control key
WERKS                    Plant
LTXA1                    Operation short text
DAUNO                    Duration
DAUNE                    Normal duration/unit
ARBEI                    Work
ARBEH                    Unit for work
ANZZL                    Capacity required
Hope this will work.

New DMS document attachment to order header - can it also be done to a task list?

With business function LOG_EAM_CI_6, you can now attach DMS documents to the order header or operation level in the 'Additional Data' tab.
Since a lot of clients use documents to list complex preventive maintenance instructions, is it also possible to attach a DMS document to a task list header (or operation) and have it show up in the new 'Additional Data' screen area of the resulting order (using a maintenance item/plan to generate the order)? Or do we still have to use the task list operation PRT functionality and have it show up in the order's operation PRT?

Hi Arthur,
I have configured Task list as per the SAP note 1821916 & activated DOC_TL_GUI. This allowed me to attach documents to the Operation &/or Header of the Task Lists. The problem I am facing is when I assign the task list to the work order the documents are not transferred . You have stated that they have transferred to the work order so I am wondering if there is something I missed.
Arthur Balajthy wrote:
And I checked that by adding documents to a task list header or operation, the work order generated from a maintenance plan/item referencing that task list does have those documents attached also.
I haven't tried from a Plan but will do that now.
I assumed if they were attached to the Task List Operation they would transfer to the Work Order like everything else on the Task List
Thanks in advance

Having issues with created PDFs requiring Japanese language font pack when they should not

Last week, I created 3 forms for someone. They wanted a fourth, so I put that together today, but halfway through making it, my Livecycle crashed and refused to load up again (I have NO idea why...), so I reinstalled it. I went on to finish making the form, but for some reason, even though the language settings is set to English and not viewer's default locale, the form requires a Japanese font pack. My computer is set to Japanese locale, but with the default language set to English, it should bypass this. The oddest thing is that one of the 3 forms that I already created and sent to them (and worked fine!!!), now also asks me for Japanese language font packs. What the heck is going on?
The forms use nothing other than Myriad Pro, which is set to be embedded. My Acrobat opens them all just fine and shows font properties correctly, but my Reader dies and asks for Japanese font packs. Please help, thank you!
http://dl.dropbox.com/u/1910267/injection.pdf
This is a link to one of the 2 forms that is giving me trouble. It's simple, and was already created before my Acrobat reinstall, yet is now asking for Japanese fonts...
Edit: Forms were created using Livecycle Designer ES 2.5. I'm testing with Acrobat X and Reader X.

Thanks for your reply!
Ok, the form I linked, I actually only tested on my own machine, but had the Japanese font error so I assumed it held true for the new one as well. Here is the one I made today that has been tested on 4 computers (list below): http://dl.dropbox.com/u/1910267/treatment_notes.pdf
These are the computers it was tested on:
My own computer (Windows 7, format/location set to English/US, default non-Unicode language Japanese, System Locale Japan) - pops up error in Reader X, but not Acrobat Pro X
These 3 computers are all set to complete English/US and do not have Acrobat:
The recipient's computer (not sure what OS, likely Reader X, no other languages installed) - popped up the error asking for Japanese fonts
My mother's computer (XP, Reader 9, I know it has Chinese installed, but I don't think it has Japanese) - no errors
My brother's computer (Vista, Reader 9, no other languages installed) - popped up the Japanese font error
And just for fun I tried on the HP Touchpad (Reader 10.3), but it just gives that error that it can't display the contents of the pdf. I think the WebOS port of Reader either is horribly incomplete somehow, or otherwise I have no idea.
I noticed the similar threads, but since they are unanswered, I thought I'd try again and see if I could get an answer. I've got my hands in the air at this point...

Upload Task List Operation long Text using SAVE_TEXT-Urgent

Hi ,
I am trying to create Task List Operation Long text using the function module ..
SAVE_TEXT .I am passing the following keys
Text Name       300ATEST057 0000000900000009
Language        EN
Text ID            PLPO Long Text
Text Object     ROUTING    Texts for task list types
But the long texts are not getting updated in the Task lists operations .
Can anyone please suggest whether SAVE_TEXT will work for Operation long Texts or not Are we missing something
.This is pretty urgent requirement .Award points are assured.
Regards
Sam

hi,
use function module create text
check the sample code
DATA: BEGIN OF itab OCCURS 0,
      asnum LIKE asmd-asnum, " Service No
      text(5000) TYPE c, " Long Text
      END OF itab.
*DATA: itab1 LIKE itab OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF itab1 OCCURS 0,
      asnum LIKE asmd-asnum, " Service No
      sequ type i,          " Text Sequence
      text(5000) TYPE c, " Long Text
      END OF itab1.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
        INCLUDE STRUCTURE tline. " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname, " Object Name
       dl_lan TYPE thead-tdspras. " Language
Constants
Object ID for Long Text of Service Master
CONSTANTS:c_best TYPE thead-tdid VALUE 'LTXT',
          c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
for file splitting.
DATA: start TYPE i,
      len   TYPE i VALUE 92,
      totlen TYPE i,
      n TYPE i.
PARAMETERS p_file LIKE rlgrap-filename."input file
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
    TABLES
      data_tab                = itab
    EXCEPTIONS
      conversion_error        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      OTHERS                  = 7.
LOOP AT itab.
    itab1-asnum = itab-asnum.
    CLEAR: totlen,n, start.
    totlen = STRLEN( itab-text ).
    n = totlen / len.
    n = n + 1.
    DO n TIMES.
      itab1-text = itab-text+start(len).
      itab1-sequ = sy-index.
      start = start + len.
      APPEND itab1.
    ENDDO.
ENDLOOP.
delete itab1 where text is initial.
SORT itab1 BY asnum sequ.
LOOP AT itab1.
    dt_lines-tdformat = '*'.
    dt_lines-tdline = itab1-text.
    APPEND dt_lines.
Call the Function Module to Create Text
    AT END OF asnum.
      dl_lan = sy-langu.
      WRITE : / itab-asnum.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = itab1-asnum
        IMPORTING
          output = itab1-asnum.
      MOVE itab1-asnum TO dl_name.
      CALL FUNCTION 'CREATE_TEXT'
        EXPORTING
          fid         = c_best
          flanguage   = dl_lan
          fname       = dl_name
          fobject     = c_material
          save_direct = 'X'
          fformat     = '*'
        TABLES
          flines      = dt_lines
        EXCEPTIONS
          no_init     = 1
          no_save     = 2
          OTHERS      = 3.
      IF sy-subrc <> 0.
        WRITE:/ 'Long Text Creation failed for Service No'(001),
        itab1-asnum.
      ELSE.
        WRITE:/ 'Long Text Created Successfully for Service No'(002),
        itab1-asnum.
      ENDIF.
      REFRESH dt_lines.
    ENDAT.
ENDLOOP.
in text file give first field records in capitals
regards
siva

Some Language fonts no longer display correctly

I have a few language fonts, specifically Russian and Church Slavonic, which I have been using for years without any problem. They still partially display correctly, but there are some characters which display a different character now. For instance, in the Church Slavonic font, there are many characters with diacritical markings, where those accents etc. are typed after the character and backed up over the character. They are not displaying correctly anymore. Plain Russian fonts as well have certain characters that aren't even recognized now. I am using PopChar Pro, and though they display correctly in its list, when I click on them, the wrong character is display in the text. Does this have something to do with Unicode? I use these fonts mostly in MS Word and Finale.
Thanks for any help on this topic.
Sima

Yes, it is true that these fonts do not display
correctly in Finale.
Last I checked Finale could not do Unicode, so it may be another problem. If it can do Unicode, you should be able to use Lucida Grande and the Russian keyboard layout. If not, you should be able to use a font with CY after the name with the Russian keyboard. You might want to ask in the Finale forums:
http://forum.makemusic.com/
Is there any sort of application
that can fix old fonts to be Unicode compatible?
It would be very complex I think and require an expensive font editing program like FontLab.
On another note, are you aware of whether Unicode
includes Church Slavonic (I suppose it would be in
the same category as Old Slavonic)?
Yes, it does. Just look at the Cyrillic block in Character Palette. Or here:
http://www.unicode.org/charts/PDF/U0400.pdf
However you won't find all glyph variations -- that will depend on the font. For an example of Slavonic Unicode you can see the last item on this page:
http://homepage.mac.com/thgewecke/lp.html

Addition of a language font in task list

Similar Messages

Maybe you are looking for