Addition of field in list editing for notification - IW28

Hi Group,
As per the client requirement, we are adding a additional field on the notification header using the user exit QQMA0001.
Now i want to sort the notifications using the standard SAP list edit functionality i.e. IW28 but using my additional custom field.
What i need to do to reflect this adiitional field there in list edit?
Thanks

Raghunandan Iyer,
There is no user-exit required to append a structure, you just need an developer key.
Appending the structure will not affect the standard system.
Any appends will show up on the SPAU list. It is part of the upgrade process to review this SPAU list so it should be captured.
Try it in a test/sandbox system...
PeteA

Similar Messages

QM01 - Add new fields under SUBJECTS tab for notification type Q2

Hi Experts,
My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
I followed the following steps to achieve this :
[ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
Now I arrived on the screen where we have to define the custom screen area and screen number.
But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
Please refer to below screen shot for better understanding :
Please help ! Thanks in advance.
Kind Regards,
Ashish Goyal

Dear narendra bora
You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split.
But it is not possible to enter two users in reported by field.
I hope this will resolve your issue.
Regards

Add field TIDNR to list edit PM reports

Hi,
We have a requirement to add field TIDNR (Technical Identification number) from ITOB table into several list edit PM reports (IW28/29/38/39/64 to 69)
I have read sap note [586523|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=586523] but this relates to adding customer defined fields and amending output structures and as the above field is a Sap standard field is it possible someone could give me some advice on how this could be done.
Regards
Gary

Hi,
For IW28:
Create a custom append at the end of structure RIHQMEL_LIST.
Create an implicit enhancement in the SAP programmes that need the new field (that you will have to find out yourself)
Roy

Sold to party field should be editable and non-Editable for diff sales org

Hi,
in creation of SO,i want SP field should be editable for Domestic sales org and Non Editable for Export sales org.
please help on this.

Dear Mohanty,
In sales order, for domestic sles SP is editable - It is Normal process.
Non Editable for Export sales org.
In this how user will enter the sold to party while creating sales order.
And did you create export customer classification in Sales org rather Distribution channel.
Regards,
Mani

WBS List Editing

Hi all...
In WBS Element : Investment Reason field - Control tab we are using. So reuirement is how to get this field in Report ?
I tried CN43N - WBS Element List Overview But Investment Reason field not found even in dynamic selection option also this field is not available.
We are using ECC 6.0 Version.
Regards,
Swapnil Kharul

Hi CS Babu,
CN43N --- Dynamic selection option this field is available but if you take Dump/ Output this field not available anywhere also in variant.
That means I hv to find out WBS List editing for single Investment Reason even though multiple selection option is available in Dynamic selection for CN43N
Inv Reason is field of PRPS though not appearing.
We are using ECC 6.0 Version.
If I put multiple Invesment Reason System should give me those values in O/P column.
Swapnil Kharul

Is there a way to Search (List search) for more then one field text from a column for Bulk uploading?

I've been trying to find more information on this and I apologies if this has already been answered. I just don't know the correct way to ask this. We have a SharePoint List at the company that we have people input information into different columns. The
problem is most of those information are very repetitive. Is there a way for me to search more then one field text in the column and just input that same information in?
ex:
Column 1
Column 2
Date:
883851
MidWest
User input
8831518
MidWest
User input
On the search field in the SharePoint List, I would need to search for 883851, 8831518 etc, would view those requested numbers, then I would click edit and change dates to those rows. Does that make sense? I'm sorry I'm fairly new at sharepoint.

I think what you're asking is about having repetitive options in a list, show up easily for new items being created.
This can be done by setting the columns that contain repetitive information to Choice fields. In the configuration of the Choice field, check the box for "Allow custom values". Now as users are entering data into the list, the dropdown of options
for a given field grows and users can quickly see and select previously entered and thus repetitive values for the given fields.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Item category editable for components in task list

Hi all,
I need help to put the item category editable for components in task list.
Currently it comes as "L" and the field is non editable. Do you have any ideas or solutions? I already tried SPRO but didn't find anything useful.
Thanks in advance,
MB

Thanks Maheswaran,
So if it isn't possible to make it editable, how can I change the category to 'N'?
Does that configuration depend on the company? Because I want the item category to be 'N' for just some companies.
Thanks
MB

HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...

You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.

Suppress entries in the drop down list box for fields Priority and Category

Hello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PM

Hello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PM

Add List box for one field in ALV GRID

Hi All,
I need to add drop down list box for one field in ALV Grid.
If any body knows, please help.
Thanks in advance.
Regards
Manglesh

Hi,
Here is the ex where i have used for date parameter in the sel screen
type-pools: vrm.
data: name type vrm_id,
      list type vrm_values,
      value like line of list.
parameters :    p_date like p_date2
                              as listbox visible length 15.
at selection-screen output.
name = 'P_DATE'.
value-key = '1'.
value-text = 'Today'.
append value to list.
value-key = '2'.
value-text = 'Last 7 days'.
append value to list.
value-key = '3'.
value-text = 'Last 30 days'.
append value to list.
value-key = '4'.
value-text = 'Last 90 days'.
append value to list.
value-key = '5'.
value-text = 'Last year'.
append value to list.
Call the ''VRM_SET_VALUES' to display the values in Listbox
call function 'VRM_SET_VALUES'
    exporting
      id     = name
      values = list.
at selection-screen.
if sy-ucomm = 'CLI1'.
    sscrfields-ucomm = 'ONLI'(001).
endif.
if p_date = '1'.
    p_date11 = sy-datum .
elseif p_date = '2'.
    p_date11 = ( sy-datum - 7 ).
elseif p_date = '3'.
    p_date11 = ( sy-datum - 30 ).
elseif p_date = '4'.
    p_date11 = ( sy-datum - 90 ).
elseif p_date = '5'.
    p_date11 = ( sy-datum - 365 ).
endif.
Hope this helps u..
Please reward points if useful.
Regards,
Sreenivas

1 custom field not showing up for modification in new List Variant for KS12

Dear SAP Experts,
I need some help regarding list variants using custom fields. I made a new List Variant for transaction KS12 using a few custom and standard fields. The custom fields are in CI_CSKS structure. I did all this according to not 95080 using option two (Adjust screen 1399 in function group KMA1). I got the header to display the name of the fields in SE51. The strange things is that after I start KS12 with the new list variant one of the custom fields doesn't show up for modification if there is no value in it where this is not the case with the others. That is if there is no value in it already (even on character) I can't enter new values in to it, which beats the purpose. I checked the attributes of the the custom fields and they are all the same, unless I missed something.
Does anyone have an idea why this could be?

Hi Michael - I too have exactly the same problem in Lion. It seems to be a bug.
A minor one, given all the other much larger issues I have with Lion.
I'm living with it in the expectation that someone will fix it. I notified it ages ago - long before the recent Lion update.
I am mainly using Snow Leopard. This problem doesn't happen in Snow.

Work Manager 6.1: Adding custom field for notification creation

Hi,
I already added new fields in the past, and also in WM6.1 for fetch BAPIs, but now I'm trying to do it for the NotificationAdd Transaction and I'm not able to make it work. I guess I forgot some step but I don't know which, so I will describe what I did:
Agentry:
Added new field to the Notification object
Added new field to the NotificationAdd Transaction
Added new field to the NotificationAdd Detail Screen
Java:
Created class Notification.java extending com.syclo.sap.component.lam.notification.object.Notification
Added new field to the new Notifciation class
Copied constructors calling super method.
Override method setProperties(User u, NotificationPostBAPI bapi). Now is calling the super method and afterwards setting the new field. Here is where I have the error when I debug, the u.getString("transaction.Z_NewField")) i returning an empty string because it's not finding the value when reading from the transaction.
Created class NotificaitonPostBAPI extending from com.syclo.sap.component.lam.notification.bapi.NotificationPostBAPI.Override method setHeaderParameters to set the value in the ABAP structure for the new field after calling the super method.
Configuration Portal:
Changed global parameter to assign the customer NotificationPostBAPI class
Created global parameter to assign a BAPI wrapper to the new customer NotificationPostBAPI class
Change the global parameter to assign the class for Notification object in order to use the new customer class
Do you know why during the setProperties method created in Java, Step1 the transaction value for the Z field is empty? It seems I'm forgetting something quite simple here.
Thanks in advance.

Hi,
May be the setter and getter methods, the value from transaction is not captured in the properties
public void setProperties(User u, NotificationPostBAPI bapi)
throws Exception
setABC(u.getString("transaction.notification.ABC"));
public String getABC()
return this.ABC;
public void setABC(String ABC)
this.ABC= ABC;
Regards,
Sravanthi

Using the same field on a form for multiple menu/drop down list

I have a form that tracks people that attend orientations. It is possible for an Attendee to attend the same orientation up to three times.
In using the Update record wizard, I have two recordsets, rsAttendees and rsOrientation from two separate tables.
I want to be able to use the rsOrientation to create a drop down list, but I want to use that same recordset field as the source for the dropdown 3 times on the same record.
There are 3 fields on the Attendee form:
Orientation1, Orientation2, and Orientation3.
Using the wizard, I set each up as a Menu, then select the rsOrientation, Orientation.Date as the source for all 3.
The problem is that only the Orientation1 field is populated. Orientation2 and Orientation3 dropdowns are blank.
Name:________________________
Orientation1: __________________<-----------Using Wizard, pull Menu list from Orientation.Date This one works fine
Orientation2: __________________<-----------Using Wizard, pull Menu list from Orientation.Date This one is blank
Orientation3: __________________<-----------Using Wizard, pull Menu list from Orientation.Date This one is blank
Do I need to reset the rs somehow?

>Do I need to reset the rs somehow?
Very possible. You haven't mentioned what server model you are using.

Field selection for Notification type

Hi all,
I have a configured a notification type. I want to hide unwanted fields . I checked for " Set Field Selection for Notifications" in spro but i am not able to find these fields.
The Fields are under below tabs
location Data Tab
1.Room-ILOA-MSGRP
2.Plant section-ILOA-BEBER
3.Business Area-ILOA-GSBER
Please guide how to hide theses fields
Anil Kumar

Hi Anil
I have not checked in SAP, butif the hiding of the fields in not possible through SPRO, then an easy way to hide fields is to use GUixT, which comes with std. SAP.
Regards
Manish Bansal

Change structure for list editing of functional location

What is the significance of change structure for list editing (t code il04) of functional location?

just enter the functional locations you need to create and descriptions and save

Addition of field in list editing for notification - IW28

Similar Messages

Maybe you are looking for