Addition of standard programs in Schedule Manager Flow definitions

Hello Experts,
I want configure schedule manager for month end closing.
In that I am creating flow definition. In the flow definition I want to insert one program RKAZCO43COWL which is standard program & which is also entered in the table SCMAPROGRAMS in the reaspective appplication.
But still I am unable to find it in the input help for creating program in the flow definition.
Please help. Is there any other way where in I need to register the standard program ? How can I find it in the input help ?
Thanks in advance.
Abhishek

Dear All,
I am still facing below issue.
While creating flow definitions , when I try to attach program I face below issue.
e.g. I want to attach program RK_PEP_WL_SEL_SAL which is in the application CO-PC-OBJ-SALESORD but when I created flow definition I gave application as Controlling , so how to add program in the flow definition which has different application ?
If I try to attach application CO-PC-OBJ-SALESORD in flow definition itself then I cannot add programs in Controlling application .
Kindly help how to add different programs from different application.
Thanks in advance.
Abhishek.

Similar Messages

How to add repeat step in Schedule Manager - Flow Definition

Hi Everyone,
I am trying to design a Flow Definition in Schedule Manager which involves repeating a step based on the user decision. Please explain me how to achieve the following:
Change the task options (user Decisions)
Repeat a step based on the Task option.
Thanks,
Sandeep

Hai Krishna,
Step 1 : create condition at disired position i work flow.
step 2. cut the block which u want to place in that condition.
step 3 : paste the block in the condition
Thanks
Ramesh

Closing Cockpit/Scheduler Manager Flow Definition

Hello,
I am having a problem with CLOCOC flow definitions. I created a flow definition that sends notifications in case of a task is overdue but I need to access the information of the task, namely the person responsible to know who to send the email.
The problem to do this is that the workflow container doesnu2019t have the info from the task required it only has the WF Initiator. Anyone know a way to work around this problem and get the person responsible for the task?
Best regards,
Ricardo Candeias

Hello,
Normally for a workflow you would look in the Workflow Builder to see if the agent is assigned using a container element.
Then use that same container element for the mail.
regards
Rick Bakker
hanabi technology

Standard programs for scheduling batch of IDocs

People
I know there are standard programs that are used to send the Generated IDocs to the Ports at fixed intervals.
These are apparently specific to Transactions.
Eg there will be one for the 810(Invoice)
One for the ASN etc.
So can any one please guide me about this.I need to know the names for a quite a fes types.Including the Rare ones 816(Organisation relationships) and 824(Application Advice).
Regards
Anup

Hi
Some standarad programs used to trigger idocs .
RBDMIDOC - to trigger idocs from change pointers
RSEOUT00 - to process triggered idocs
Regards
Rajesh babu

Schedule Manager (add Tcode to Flow Definition step)

Hello together,
I have got a problem with the schedule manager ("scma").
I would like to add the Tcode cja1 (Project-Related Incoming Orders) alternatively the program "SAPLKAZB" to a flow definition step with a variant.But the program "SAPLKAZB" is used for more tcodes than "cja1".
How can I solve this problem?
Thanks in advance!
Greetings,
Peter

Hello,
The Program 'SAPLKAZB' cannot be added to the flow definition step since its function pool and not an executable program due to which you wont be able to execute it.
So its better the transaction 'CJA1' can be added to flow definition step and no alternative for program with varaint coz it wont work.
Regards,
Mansi.

Schedule manager -Programs for flow definition

Dear SAP experts
I would like to know which programs can be run using flow definition?
can i add new programs like vendor display line item program RFITEMAP. and have email of item periodically to certain users.
Tell me how selection variables TVARV , STVARV functionality will be used for this.
Thanks
S AP

Hi,
For enhancing the standard SAP program like RFITEMAP, you should check for proper exists. It will be usually in the form of Z-Include. U can get the ABAPer help on this.
TVARV - Table of variables in selection criteria i.e it helps in holding the variant variables. To manipulate the variant vairbales, you can use this table
Regards,
Sridevi
Award points, if useful

Does SAP Provide any standard conversion program for Batch Managment activa

Hi,
An idea if SAP Provides any standard program to conversion of non batch managed material to batch managed material in a productive SAP Environment and close open documents,
It would be great help if somebody can reply to these queries.
Thanks in advance
Regards
Bijaya Pradhan

Hi
Use the same Driver program RIPROV00 which is used as Script driver program to fire the output from smartforms also
Only thing is little bit you have to modify the program such that it triggers the smartform instead of Script.
I think there is no smartform driver program for this IW21.
see some standard SF driver program like RLE_DELNOTE and
modify it and use it.
Reward points for useful Answers
Regards
Anji

Landed Cost manager Program is scheduled to run everyday but it did not run

Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
Thanks
De

1006390 wrote:
Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.What if you submit the request manually, does it work?
Assuming no error can be found in the DB/CM log files, have you verified the scheduled settings for this program? Try to schedule it again and see if this helps.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
http://docs.oracle.com/cd/E18727_01/doc.121/e12951/toc.htm
https://forums.oracle.com/forums/search.jspa?threadID=&q=Notify+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

Addition of a new column to the standard program

Hi Friends,
I have a requirement to add a new column Group Key to the existing report a standard program RFD0PR10 and display the fields based on the group key .
The standard program uses methods write _header etc...
can any one guide me in this issue.

hai naveen,
For standard tables, it is possible to add new columns by using either .include or
Append structures. but,it is not possible to change key of the existing of table .
if useful, reward points
bye
G.V.K.Prasad

SCMA(Schedule Manager) - Monitoring Flow task

Hi,
Anyone has experience with SCMA. If so, can you please guide me in resolving the following issues.
1)In monitor, Flow task status is green but the underlying two steps have no status. I see Schedule Job and Start Job for each step with no status.
Why SCMA does not update the status of start job(or Schedule job)?
2)Since the flow definition is assigned to 'Customer' appplication, no work list is possible.
if so, shouldnt the monitor display the details of corresponding job(from SM37) in the flow task details. I havenot seen any demo yet with worklist so I do not what does it provide in monitor.
3)Is there an implementation guide for customer applications providing worklist?
I sincerely appreciate reply for any of the above questions.
thanks,
venu

bumping up.

Addition of my code in sap standard program

hi gurus,
              can i add my code in the sap enhancement below in sap standard program
i want add the logic below.
ENHANCEMENT-POINT MATERIALFINDUNG_10 SPOTS ES_SAPFV45P.
$$-Start: MATERIALFINDUNG_10----
$$
ENHANCEMENT 153 OI0_COMMON_SAPFV45P.    "active version
IF NOT G_OIK_SUBMAT IS INITIAL.                         "SOTK000026 DN
     TVAK-KALSU = G_OIK_KALSU.                           "SOTK000026 DN
     CLEAR PRODUCT_SELECTION_REKURSIV.                   "SOTK000026 DN
ENDIF.                                                  "SOTK000026 DN
ENDENHANCEMENT.
when i click on enhance button(shift+F4) it does not give me any place to write.
but if i click on the enhancement name i am able create one implementation. is that ok.should i add my code there.

Hi Kiran,
That is not the solution I am looking at. Also the link provided within the link you provided does not work which is:
http://www.synactive.net/site/index.htm
Do let me know if you have a solution to change the standard GUI status(Not by copying nor by using the access key) either by any menu exit or something of that sort.
Regards,
Deepak.

Workflow - Schedule Manager problem

Hi,
I have configured a flow definition task in Schedule Manager (SAP 4.7, IDES system). After the immediately execution I got a very strange dump:
Syntax error in program "CL_SWF_RUN_WIM_LOCAL==========CP
The following syntax error occurred in the program
CL_SWF_RUN_WIM_LOCAL==========CP :
"You can only define attributes in the PUBLIC, PROTECTED or PRIVATE sec"
Error in ABAP application program.
The current ABAP program "CL_SWF_RUN_WIM_FACTORY========CP" had to be
terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
How can I manage the workflow integration? As I see this is not a SCMA problem, maybe this is a workflow setting problem!?
Any help in this much appreciated.
Thanks,
Miki

Hi Mikkel,
Thanks your answer. In my view SWU3 is OK:
- Maintain runtime environment is green
- Maintain definition environment is green
- Maintain additional settings and services is green
- Classify tasks as general is green
Have you got any other idea? Unfortunately, I tried this flow definition in an other SAP 4.7 IDES sandbox system, but I got this dump again.
Kind regards,
Miklos

Scheduling job perodically vs schedule manager

Dear SAP expert
I would like to run the report fbl1n(PRogram RFITEMAP ) and email to users.
I have 2 option:-
1.Schedule the job periodically and email it through SM36.
2. customise the report in schedule manager in flow definition and email to users.
option 1 i am able to execute.
option 2 i am not fully through. Please clarify how option 2 can be done.
How i should decide pros and cons of schedule the job periodically through SM36 OR THROUGH SCHEDULE MANAGER
PLS CLARIFY
thanks
S AP

Hello Santosh,
the link that you already got is good. Perhaps you also want to check out [http://wiki.sdn.sap.com/wiki/display/SM/FAQJobSchedulingManagement|http://wiki.sdn.sap.com/wiki/display/SM/FAQJobSchedulingManagement] and [SAP is first vendor to provide a comprehensive Job Management Suite |SAP is first vendor to provide a comprehensive Job Management Suite] for further information.
In short SAP CPS is an advanced scheduling tool like which competes against other like UC4, Control-M from BMC etc. But all these tools do not provide any real job documentation or job request functionality in order to get the process governance right. That's where the SolMan gets into the game.
Best Regards
Volker

Month End Closing - Schedule Manager

Hello,
Does anybody know what are the other tools offered by SAP for month end closing?
I am trying to use Schedule Manager (SCMA) but its not letting me define dependencies on "Notes" task. I mean I am trying to add "Notes" task in Schedule Manager for the specific month end tasks which will be performed outside of SAP and user will just checkmark in SCMA.
Any help will be appreciated.
Thanks.

Dear All,
I am still facing below issue.
While creating flow definitions , when I try to attach program I face below issue.
e.g. I want to attach program RK_PEP_WL_SEL_SAL which is in the application CO-PC-OBJ-SALESORD but when I created flow definition I gave application as Controlling , so how to add program in the flow definition which has different application ?
If I try to attach application CO-PC-OBJ-SALESORD in flow definition itself then I cannot add programs in Controlling application .
Kindly help how to add different programs from different application.
Thanks in advance.
Abhishek.

Standard Program to List Fields used in a Dynpro.

Hi Experts,
I would like to know whether there are any Standard programs available that can give the following result:
1. If I give a Dynpro Program Name and Screen Number, it should list all the fields used in the program.
2. In addition, I need to know whether it is a mandatory / Required field ..
Is there are any SAP Standar Program / Func Module which can give me the above results....
Thanks in advance..
Best Regards,
Raghunahth L

Hi,
You may use one of the function modules - just check them and choose the one which best fits your needs:
- function modules from function group SDYN
- function modules from function group SDOP
With these two fugr you may get also the flow logic of the sccreen

Addition of standard programs in Schedule Manager Flow definitions

Similar Messages

Maybe you are looking for