Additional Barcode readings in LM46

Hi all!!!,
I`m using the Picking & Packing transaction from std RF functionality, tx LM46. I was wondering if there is any way to have the system asks the user to enter (read the barcode) the storage bin or the material as confirmation that the process has been carried out successfully. Since it seems very easy for the user to make a mistake in the operation if the only input that they have to do is to press Save in order to mark the material and Continue to confirm the TO and create the handling unit.
Thanks in advance!
Marcos

Hello,
It can be customized:
IMG>Logistics Execution>Mobile Data Entry-->Verification Control
Verification Control
In this chapter you can define the verification control by defining which data is to be verified and during which activities the verification profiles are to be used.
Andrzej

Similar Messages

Problem with DataMatrix barcode

Hi,
I am using a xdp form with DataMatrix barcode in designer 7.1. I am rendering the xdp as pdf in livecycle workbench. The problem is the barcode is working properly in desinger, but in the rendered pdf its not working, Can anyone identify which might be the cause of this problem.
Thanks in advance,
Kruthi

There are typically two reasons why a Barcode does not render on a form:
The barcode has exceeded it's capacity. If the barcode is designed to hold 1,000 characters (for example) and the .rawValue is 1,100 characters then the barcode will gray-out in Reader 7.x or will simply disappear with Reader 8.x and higher. In this case you need to adjust your code so that the capacity is not exceeded. Try reducing the number of fields included in the data and DO NOT use XML, use tab-delimited data capture and convert this to XML when you decode the data. You can also add additional barcodes to your form. You are not limited to a single barcode on your form.
You are filling out the fill-and-print PDF barcoded form within the free Adobe Reader and have not properly licensed the technology. If your users are filling in your barcoded form using the free Adobe Reader you need to license Adobe LiveCycle Barcoded Forms from Adobe. If you do not the barcodes will disappear in Reader 8.x and higher.
This session is related to PDF417 but the concepts are the same when looking at barcode capacity: http://my.adobe.acrobat.com/barcodedformselearningpdf417bestpractices/
This session is for a prior version of Reader Extensions but will show you how a Barcoded Form should be properly licensed: http://my.adobe.acrobat.com/barcodedformsandreaderextensions/

How to create barcode in CR2008?

According to following introduction of CR2008, it support barcode.
http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/crystalreports/featuresfunctions/index.epx
Built-in barcode support u2013 Save design time and reduce your cost. Generate barcodes with only a few clicks of the mouse by using the new 'turn to barcode' function in the context menu. Easily convert fields to Code39 barcodes without any coding or extra steps. And benefit from additional barcode fonts available from third-party vendors.
But I don't know how to create a Code39 barcode in CR2008.
I cannot find any button or menu related with barcode creation.

Hi
Is this issue from CR designer? If so, please post to the Report Design [forum|SAP Crystal Reports;
Note: that if the issue exists in the CR designer, the issue will exist at runtime also and needs to be resolved in the designer 1st.
Sincerely,
Amit

Custom Barcode in Adobe Form Design

Hi All,
I want to know is it possible to add a custom barcode in Adobe designer (SFP) and if yes then how to achieve that ?
Regards
Ravi

Hi,
you cannot use custom barcodes. Only barcodes available in the library can be used.
You have to wait till sap releases upgrades with additional barcodes.
Thanks

QM Physical Sample Numbers to xMII

I am trying to get the Physical Sample numbers for an Inspection Lot out of SAP and into xMII for additional barcode label processing. I can see the information I need in the SAP R/3 client but am unable to get it to xMII.
I am using the JCO interface and using BAPI_INSPLOT_GETLIST to get the inspection lot # for a Production Order and have tried passing that into BAPI_INSPLOT_GETDETAILS, BAPI_INSPOPER_GETLIST and BAPI_INSPOPER_GETDETAIL but none of them seem to have access to the physical sample records. Can anyone help me with a RFC, BAPI or user Exit that I can use to get this data?

I have tried using BAPI_INSPCHAR_GETRESULT but I can only get information if the results for that char have ben posted. I am trying to get the physical sample numbers to send to a barcode label application so we can track the samples thru the testing machine. The requirements are for multiple lables in different sizes so we are not printing these labels from SAP.
For each inspection lot\physical sample drawing, we generate 30 physical samples. (1 master, 2 pooled, 27 retention) I need to get these numbers out of SAP to print them.
If I run transaction QA3 from the client and select Samples (Physical Samples (Shift + F2)) from the menu, I can see the list I want before any results have been entered.

Same SCC Code / Different SKUs

We have one SCC code with multiple sku's. From an automated production posting perspective with PLC scanners how do companies differentiate between different sku's?
Thanks
Lynsley Tyler
Georgia Pacific

Hi,
I have met following solutions:
1. adding additional barcode with SKU instead of SCC code
2. adding additional barcode connecting: SCC code plus SKU code in one barcode.
Of course, it needs some additional implementation/organisational work to change current settings.
maybe it helps.
regards,
wojciech

Heretic here! Have just inherited a used IPAD 2 and work on Windows 7PC Home premium. Can they interact?

Have just inherited a used IPAD 2 and work on PC windows 7 Home premium.
Would like capability of using IPAD as a "dumb terminal" occasionally to connect to PC to do scut work while otherwise engaged. Possible? Not interested in films and music so much as being able to enter home booking system etc.
If Yes, what do I need to make it so?

iOS has no file system directly accessible to users and cannot really be used as a 'bridge' to control or operate your machine's operating system (whether OSX or Windows).
When you say, "enter home booking system," there are plenty of iOS applications which would be suitable for creating home inventory system and spreadsheets. Applications such as dropbox can be used to transfer files between the device and your machine.
Additionally, barcode scanning apps exist where you can, for example, bulk scan ISBN's, transfer the csv file, and subsequently input them into a spreadsheet on your machine.

Invalid readings with additional inputs

I am using a PCI-MIO-16E-4 daq. I have three 0-100 mV input channels and three 0-10V inputs. If the 0-10V channels are read simultaneously with 0-100mV channels, the 0-100mV inputs are incorrect. Is this a common problem? How do I fix it?

It seems that the gain setting is not set right.
For the channels that are 0-100 mv, set the gain to min=0, max=100mV
and
for the 0 to 10 v, set it to min=0, max=10 volts
There could be issues (with settling time)at high scan rates when the gains are set differently, but for most part, it should work.

Is there a vi for acquiring bar code readings from a scanner?

I need to acquire at least 3 readings from multiple transducers and have their serial number placed and stored in my vi. Should I use a digital indicator, and if so, what will be my input. Is there a VI that handles this task, already built into Lab View 6.1?

Justin,
It all depends on what kind of scanner you are using and how it communicates. If the scanner communicates using serial then it would be easy to write a VI to recieve the information. The protocol for a scanner is not likely to be very complicated.
There are two instrument drivers on the Instrument Driver network for reading barcodes. Go to www.ni.com/drivers and then click on Search for a Driver. Only fill in the additional keywords and search for "bar code" (include the quotes to search for the phrase). You will find two instrument drivers (MS 810 and MS 850).
Carl L
National Instruments

Confusion with the use of PDF417 Barcodes

I am trying to get clarification on what is required to utilize the Acrobat Designer to create a form that creates a PDF417 barcode. Here is the scenario:
We would like to create a form with Designer (bundled with Acrobat 7.0 Professional)that will be used as an index sheet for a document scanning system.
The form would contain one or more fields that a user would complete using the standard Acrobat 7.0 Reader that they can download from Adobe. When the user completes the data entry into the fields, they will print out the form (containing the 2D barcode (PDF417).
The form would be scanned and put through recognition software that is supposed to ready PDF417 2D barcodes.
I have read through the literature and have seen inconsistent representations regarding the ability of a user to use the Acrobat reader to complete the form and print it with the PDF417 barcode.
In one of the forum postings a user was told that they needed certain decoder software from Adobe or extensions.
I am not clear if the user filling out a form using Acrobat 7.0 reader, which generates the PDF417 barcode supposedly, can be read by an application which supports that barcode type. Or, if this is a special type of PDF417 barcode that has some additional attributes that requires special software from Adobe to be recognized.
Please explain how I accomplish the objective set forth above.

Mike,
It looks like I scanned over your email a little too quickly and missed a
VERY important point. You mention that your form will be "bundled with Acrobat 7.0 Professional". This is VERY important.
In fact, you will need to license nothing else from Adobe. You DO NOT need Reader Extensions because you are deploying Acrobat Professional on the work stations that will be filling in your forms. You do not need to "turn on" hidden functionality of the Free Reader if you are using Acrobat Pro. You already have all the functionality you need.
Second, when you fill in a Barcoded Form with Acrobat Professional the PDF417 Barcode that is rendered in your form will be a 100% standard PDF417 Barcode. But do not turn on compression. When filled in - in Acrobat - the Barcode is rendered so that it can be read by ANY Decoder that can read PDF417. However, if you enable compression you will need to use the Adobe Decoder. If you start decoding and see you are getting lower than a 99.9% decode rate, take a look at buying the Adobe Decoder. Not the whole "Barcoded Forms" license, just the Decoder.
Again,
if you are using Acrobat to fill in these forms, you have nothing else to buy. If you want to deploy these forms with the Free Reader then you will need to license Adobe LiveCycle Barcoded Forms and possibly ARES.

How do i purchase access to LiveCycle Barcoded Forms?

I am currently creating a form in Adobe Livecycle ES2. I want to put a PDF417 2D barcode on the form containing the data of the fields in the form. The customer should be able to use Adobe reader to fill out the form and the barcode should update with the field information. However to do this i need to purchase a license for LiveCycle Barcoded Forms. In order to get this license it seems that I need to purchase Livecycle reader Extensions ES2. However the product is not available online and when contacting Adobe no one knows how I can purchase this product. I have been in contact with: Adobe customer service Denmark, Adobe support Denmark, Adobe sales Denmark, Adobe customer service Sweden, Adobe Support Sweden, Adobe Sales UK, Adobe support UK, Dustin Denmark (Adobe reseller).
Does anyone know how to purchase this product or how much it costs to purchase?
An additional question i have is if there is a product that works in a similar way for Adobe Acrobat X Pro? Or do i also need Livecycle reader Extensions ES2 to unlock user rights for barcoded forms made with Acrobat X Pro?

Ok i give up!
For other Adobe users looking for this product. Please consider that it is impossible or nearly impossible to purchase a license for it! I have contacted the following with no luck:
Adobe customer service Denmark
Adobe support Denmark
Adobe sales Denmark
Adobe customer service Sweden
Adobe Support Sweden
Adobe Sales UK
Adobe support UK
Adobe Sales US (through the phone no. listed on the web page for the product)
Adobe Support US
Dustin Denmark (Adobe reseller)
Avoka (Adobe partner)
4Point (Adobe partner)
Please keep in mind that there are other easier ways to unlock user rights.

How do I generate a data merge in InDesign from an excel spreadsheet which includes a barcode

Can you please advise if the following process is possible within InDesign CS 5.5? (Mac OS 10.8.2).
We need to create a data merge that includes a barcode. The data merge is for several thousand records.
We have a customer-supplied Excel spreadsheet that contains seven fields, one of which is a number that ultimately needs to print as a barcode when we make the data merge in InDesign.
As you would expect, the conventional six fields data merge perfectly - but we can't find a way to make the barcode print correctly within the data merge.
We have investigated several possible solutions without success.
Some solutions suggest a plug-in for Excel to convert the number into a barcode whilst still in the spreadsheet - but this doesn't come across correctly when we import the CSV file into the InDesign data merge.
We have investigated certain third party software applications but none provide the full solution we require. Some, for example, appear to create the barcode within the Excel spreadsheet but don't produce the barcode correctly when we data merge in InDesign; and some will allow us to create a one-off barcode within InDesign but have no automated way of retrieving the thousands of Excel numbers and turning them into barcodes.
We have also come across possible 'font' solutions but have had no success with these either.
For a previous job we needed to produce we outsourced to a specialist mailing company, who assured us they produced the whole job (very quickly) within InDesign. They, understandably, won't tell us how they did it. But, given the speed with which they produced the job for us, we imagine - with the correct software - the whole process is easy to do.
Can you please advise?

HI MIKE
Thanks again for your reply and your help with this.
I've downloaded the barcode font from the link you supplied.
I've tried three tests - and seem much closer to getting what we need. But I've come up against a couple of issues.
TEST 1 - almost just to see if the downloaded font worked, I simply data merged our source csv file and applied the downloaded barcode font to the serial number in ID. Probably unsurprisingly, this produced a perfectly printed barcode - that wouldn't scan.
TEST 2 - I manually added asterisks before and after the serial number in the first couple of fields and then tried the same process as TEST 1. It produced a perfectly printed barcode which this time DID scan correctly - but obviously the barcode had asterisks on it which I don't want. I just want the serial number. And with thousands of serial numbers we need the addition of the asterisks to happen automatically (which is where your text editor process seems the perfect solution, if we could get that to work).
TEST 3 - Noting your comments about using parenthesis around the serial number, I followed your example of (123456). But Excel won't let me type a parenthesis. It lets me type the parenthesis but then instantly substitutes it with a - (hyphen) before the number in the actual serial number cell and no character at all after the number.
If you have any suggestions or solutions for any of the above they'd be gratefully received! Thanks again for all your help with this.
Kind regards
Rob

How to print a Barcode VERTICALLY in a SAP Script ?

Dear Experts..
I have to print a Barcode <b>vertically</b> in a SAP Script.
Could you please help me regarding this.
Thanks in advance.

Hey SR,
follow these steps :
Bar code in Smartform :
General definition of Bar code:
Bar codes are standardized characters of a symbol made up of a group of lines and spaces that can be recognized by an optical scanner. Bar codes uniquely identify article data, production numbers or transport units, for example. They can also contain additional information such as batch number, expiration date or weight.
Example
In the Logistics Execution System (LES), certain field entries can be represented by bar codes and printed on the transfer documents. This simplifies certain data entry processes such as order confirmation.
Type of bar code:
Bar codes are based on a binary principle and consist of a series of stripes/gaps of different widths. The sequence of the stripes or gaps results in an (alpha) numeric statement. Bar codes are read optically. Due to varying requirements, bar codes may differ with regard to the following aspects:
     printer tolerance
     decoding tolerance
     character width
     automatic check
     number of characters
Steps to implement bar code in the smartform:
     Use the transaction code smartstyle. Give a suitable name .Choose create.
     In change mode of the Smart Style select the Character formats node and choose Create.
     In the Character format field enter a two-character character key.
     Select the desired attributes of the Bar Code on the tab Standard Settings.
     Choose Activate.
     Assign the character format to the field or character string in the smartform.
     Activate the smartform.
     Test the same.
Regards,
Kunal.

Printing barcode in HP laser jet through smartform

Hi folks,
can i print barcode in HP laser jet P3005 PCL6 by using smartform???
plz advice.
regards
smita

Yes, you can.. I guess, HP laser jet P3005 series PCL6 can print bar codes.
I am attaching the list of BARCODE supported printers
List of device types in SAP Releases 4.6x/6.xx/NW04/NW04s
OSS NOTE : 8928
Installation of new device types ********************
Many device types are appended as a zip-attachment to this note.
README.TXT contains information about these device types and codepages.
README_UPLOAD.TXT contains information on how to import the device
types.
PRINTER DRIVERS AND DEVICE TYPES:
In R/3, a distinction is made between "printer driver" and "device type". The device type consists of all the attributes defined for an output device. For correct access, these must be made known in the R/3 system. They cover aspects such as control commands for font selection, page size, character set selection, character set used and so on. One of these attributes is the printer driver to be used by SAPscript (R/3 forms processor) for this particular printer.
If your printer is not specified in the list below, ask the manufacturer if the printer is compatible with one of the defined printers or if it can be used with another emulation (for example, Postscript).
If the printer is not compatible or cannot be operated using an emulation, you must create a new device type (if the printer is not compatible). To print from SAPscript, you must choose one of the existing printer drivers.
At present, there are five SAPscript printer drivers. They include:
for HP-PCL5 (for example, HP Laserjet 3,4,5,6 series)
for PostScript printers (PS level 2)
for PRESCRIBE (for example, Kyocera FS-1500)
for device types SWIN/SAPWIN/xxSWIN/xxSAPWIN
for all other models.
The last driver is known as the "standard driver". It cannot provide absolutely precise positioning on the paper and does not support proportional fonts. Printer drivers are relevant for forms output with SAPscript. For the output of ABAP lists special printer drivers are only used as of Release 4.5A. They are anchored in the C kernel and are developed and maintained exclusively by SAP.
In the spool environment, device types refer not only to printers but also other output devices, for example, fax machines. Device types support specific printers or printer models. Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately. On the other hand, the list of device types, above all in conjunction with SAP's hardware partners, is continually expanded.
COMPATIBLE PRINTERS:
Some printer models have been so successful on the market that many OEM products, clones and compatibles are also listed. You can often use compatible printers with R/3 by entering the printer definition of the original. Since complete compatibility is extremely rare, SAP can offer no assurances regarding the usability of compatible printers. This also applies to follow-up models made by the original producer.
LIST OF PRINTERS:
This is the list of device types supplied by SAP in different Releases. Most of these device types use "Western European" or "North American" character sets. Some device types in newer Releases however, also support other character sets and language areas such as Russian or Czech.
The device types named in this list are supported in the standard R/3 System as of the release mentioned.
If an OCR-A font (prerequisite for check printing) or an OCR-B font is supported in the R/3 device types, this is indicated. However, this generally requires additional font cassettes or firmware for the printer involved, since few printers have an OCR-A font "built in." For additional information about this, contact the printer manufacturer.
Check related notes attached for addition information on printer supportin R/3.
Related notes:
Note 135894 contains information on printing labels on special label printers.
Note 05196 contains information on printing bar codes with SAPscript
Note 94233 contains information on printing MICR font with SAPscript
Note 62178 contains information on device types for the Japanese version of the R/3 System.
Note 77891 contains information on device types for IBM-SCS printers on the IBM AS/400 hardware platform.
Note 98477 informs you on device types for printers by the manufacturer PSi.
Note 107938 contains information on device types for printers by the producer Tally.
Note 141719 contains information on device types for printers from the producer Printronix.
Note 141914 contains information on device types for printers from the producer Lexmark.
Note 153879 contains information on compatible printer models of producer EPSON.
Note 154494 contains information on compatible printer models of producer Genicom.
Note 199166 contains information on device types for printers from the producer Hewlett Packard.
Note 214187 contains information on device types for printers from the producer Océ.
Note 398236 contains information on device types for printers from the producer Sharp.
Note 408189 contains information on device types for printers from the producer Konica Minolta.
Note 436609 contains information on device types for printers from the producer Xerox.
Note 458047 contains information on device types for printers from the producer Ricoh.
Note 485240 contains information on device types for printers from the producer SAVIN.
Note 485244 contains information on device types for printers from the producer NRG.
Note 516687 contains information on device types for printers from the producer Lanier.
Note 516669 contains information on device types for printers from the producer Gestetner.
Note 878109 contains information on device types for printers from the producer Danka.
ASCIIPRI
Generic device type for line printers that can be used in urgent cases where no customized printer definition exists for a line printer. It contains no printer-specific control commands, but merely CARRIAGE RETURN, NEWLINE and FORMFEED commands. It uses the standard 7 bit ASCII character set (USASCII).
COMPU960
Device type for BULL line printers COMPUPRINT 4/66, as well as COMPUPRINT 960. Character set used: IBM 2 German.
DECLA75P
Device type for the DEC line printer DEC LA75 Plus.
DECLN07
Device type for the DEC laser printers LN07 and DECLaser 1100.
HP256X
Device type for all Hewlett-Packard line printers in the HP256... series. Based on the HP manual describing the HP256X series, OCR-A is included in this printer definition, but the printer needs an additional firmware/font cassette.
HP2930
Device type for Hewlett-Packard's HP2930 line printer.
HPDJ500
Device type for Hewlett-Packard's DeskJet 500 ink jet printer.
HPLJIIID
Device type for Hewlett-Packard's LaserJet IIIP, III, IIID and IIIsi printers, as well as the HP LaserJet 4 series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
HPLJSTND
Generic device type for printers that have an HP LaserJet emulation but cannot be operated via the definitions HPLJ4, HPLJIIID or HPLJ_II.
HPLJ_II
Device type for the Hewlett-Packard LaserJet II laser printer series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
KYOF1000
Device type for the Kyocera F-1000 laser printer. OCR fonts are not supported. Bar code printing is supported.
KYOF1200
Device type for the Kyocera laser printers F-1200 and F-1200S. OCR fonts are not supported. Barcode printing is supported.
MT600
Device type for the Mannesmann-Tally line printer MT600. Character set used: US-ASCII (that is no German umlauts).
MT600GER
Device type for the Mannesmann-Tally line printer MT600. Character set used: German. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
MT600NDA
Device type for the Mannesmann-Tally line printer MT600. Character set used: Norwegian / Danish. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
OKI341
Device type for the OKI Microline 3410 line printer.
POSTSCPT
Device type which is used for pure PostScript printers. Barcode printing from R/3 is not supported.
S4440XTG
Device type for the SEL Alcatel line printer 4440XT. Character set used: German.
SAPWIN
Generic device type for printers linked (or also fax devices) to PCs running under MS Windows 3.1, Windows 95 or Windows NT by means of the R/3 program SAPLPD. Windows printer drivers are used and the character set is ISO 8859-1. Barcode printing from R/3 is possible with the additional installation of a third-party DLL (see Note 25344), but is not supported in the standard system. OCR-A and OCR-B fonts are possible with an appropriate TrueType font (see also Note 48803).
Important Note:
As of Release 3.0E, you can use SAPWIN to:
Print proportional fonts and lines/boxes in SAPscript
Print black and white as well as color TIFF graphics (with the 32-bit SAPlpd on Windows 95 and Windows NT only).
See Note 39031.
SWIN
Generic device type for printing/faxing using MS Windows with SAPlpd. It is available as of Release 3.1H. Device type SWIN differs from SAPWIN in the layout of X_... formats for ABAP/4 list printing. The font size and line spacing were adjusted, particularly for color list printing.
In addition, SAPWIN contains an expanded list of SAPscript printer fonts for current releases, for example, Greek and Russian.
SNI4009
Device type for the Siemens-Nixdorf SNI 4009 line printer.
SNI4010
Device type for the Siemens-Nixdorf SNI 4010 line printer. OCR-A is included in the printer definition, but the printer needs an additional firmware/font cassette.
SNI9014
Device type for the Siemens-Nixdorf SNI 9014/12 line printer. OCR-A and OCR-B are included in the printer definition. The 9014/12 has OCR-A and OCR-B font installed as a default.
SNIZD13
Device type for the Siemens-Nixdorf SNI ZD13 line printer. OCR-A is included in the printer definition. The ZD13 has OCR-A font installed as a default.
CIP1000
Device type for C.ITOH line printers CI-1000 and CI-500. The IBM Proprinter II/XL emulation and IBM character set 2 (multilingual) are used.
EPESCP
Device type for all 24 or 48 element EPSON printers that use the control language ESC/P. Character set IBM 437 is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP2
Device type for EPSON printers that use the control language ESC/P2. The character set IBM 850 (multilingual) is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP9
Device type for all 9-pin dot matrix EPSON printers that use the control language ESC/P. The standard ASCII character set is used with some additional international characters.
EPLQ550
Device type for the EPSON LQ-55 dot matrix printer. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HP2300
Device type for the Hewlett-Packard 2300 line printer series. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HPLJ4
Device type for all printers in Hewlett-Packard's LaserJet 4 series (this includes LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4si). OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 4 Series printers requires SIMM module "JetCAPS Intelligent Barcode SIMM" and is supported.
IBM239X
Device type for the IBM 238X/239X Plus line printer series from Lexmark. This includes the types IBM 2380 Plus, IBM 2381 Plus, IBM 2390 Plus, IBM 2391 Plus. The IBM emulation and character set IBM 850 are used.
IBM4226
Device type for the IBM 4226 line printers from Lexmark. The IBM emulation and the character set IBM 850 are used.
IBM4232
Device type for the IBM 4232-302 line printer from IBM. The 4202 emulation and the character set IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBM6408
Device type for the IBM 6408-A00 line printer from IBM. The PropPrinter III XL emulation and the character set IBM 850/IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBMAFP
Device type for IBM's external SAP2AFP converter. The R/3 spool output is converted to AFPDS format and passed to IBM AFP software. IBMAFP can only be used in conjunction with spool-exit (access method Z when defining the device type). Selection of printers directly connected to R/3 is not possible. IBMAFP must be used for 240 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP is for use on R/3 UNIX and Windows NT platforms.
IBMEFP is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMAFP3
Device type for IBM's external SAP2AFP converter that converts the R/3 spool output to an AFPDS format and sends it to IBM AFP software.IBMAFP3 can be used only in conjunction with spool-exit (access method Z when defining the device type). Selection of printers connected via R/3 is not possible. IBMAFP3 must be used for 300 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP3 is for use on UNIX and Windows NT platforms.
IBMEFP3 is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMSCS
Device Type IBMSCS supports the "basic IBMSNA Character String" data stream for printers that are connected under IBM OS/400. IBMSCS is only supported for the use under SAP R/3 on hardware platforms IBM AS/400.
LX4039
Device type for the Lexmark laser printer series 4039. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/typeface cassette. "HP LASERJET barcodes & MORE FONT CARTRIDGE" is required. Barcode printing from R/3 is not supported.
KYOFS150
Device type for the Kyocera laser printer FS-1500, FS-3500, FS-1550+. OCR fonts are not supported. Barcode printing is supported.
NECP30
Device type for the NEC matrix printers P20/P30. The character set used is IBM codepage 850 (multilingual).
NECP72
Device type for the NEC matrix printers P62/P72. The NEC Pinwriter level 2 emulation and the character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/font cassette.
NECPW
Device type for the NEC 48-pin Pinwriter P5XL, P9XL, P6/P7, P6plus/P7plus, P2200, P2plus, P60/P70, P90, P20/P30, P22Q/P32Q, P42/P52, P62/P72. The character set IBM codepage 850 (multilingual) is used.
SNI4011
Device type for the 24-pin version of the SNI 4011 dot matrix printer. The EPSON LQ-850+ emulation and character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. The printer has these fonts built in.
SNI20XX8
Device type for the Siemens-Nixdorf 2050-8, 2075-8 and 2090-8 laser printers (HP-LaserJet emulation). For operation with R/3, you need to obtain a special font diskette for the printer from SNI. This contains the fonts required, including OCR-A and OCR-B. Barcode printing from R/3 is not supported.
MT2033
Device type for the Mannesmann-Tally T2033 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
MT2045
Device type for the Mannesmann-Tally T2045 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
DEVICE TYPES NEW TO RELEASE 3.1G:
HPDJ660
Device type for the color inkjet printer Hewlett-Packard DeskJet 660C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPDJ850
Device type for the color inkjet printer Hewlett-Packard DeskJet 850C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPLJ5SI
Device type for Hewlett-Packard's LaserJet 5Si. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 5Si requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
MT6045
Device type for the Mannesmam-Tally T6045 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
Important note: For use with R/3 the printer's standard character set must be set to Latin-1.
NEW DEVICE TYPES IN RELEASE 3.1H:
MT691
Device type for the Mannesmann-Tally T691 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definitions. These fonts are built into the printer at the factory.
NEW DEVICE TYPES IN RELEASE 3.1I:
SAPWIN5
Device type for printing cyrillic characters (character set ISO 8859-5, for example Russian) with SAPlpd/Microsoft Windows. This device type works exclusively with the Russian Windows 95 or NT 4.0 (not with Windows 3.1). To use it, a 32 bit version of the SAPlpd with a number 4.00 or higher is required.
DEVICE TYPES IN RELEASE 4.0A:
HPLJ5
Device type for all printers of the Hewlett-Packard LaserJet 5 printer series (LaserJet 5/5m, 5P/5MP, 5C) except for HP LaserJet 5 SI. OCR-A/OCR-B are included in the printer definitions. However, the printer needs an additional firmware/font cassettes. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with printers of the HP LaserJet 5 series requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
Important note: HPLJ5 uses new 4.0A features (scalable fonts under PCL-5) and can only be used in Release 4.0A and higher releases!
I2HP4
Device type for Eastern Europe for all printer of the Hewlett Packard LaserJet 4 printer series (for example, LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). Uses character set "ISO 8859/2" (Latin 2). OCR-A/OCR-B are included in the printer definitions, however, the printer requires additional firmware/font diskette. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a respective SIMM module is required. For the barcode print from R/3 with printer of the HP LaserJet 4 series the SIMM module "JetCAPS Intelligent Barcode SIMM" is required and supported.
I2SWIN
Device type for Eastern Europe for printing under Microsoft Windows via a 32 bit SAPlpd. I2SWIN uses the character set ISO 8859/2 (Latin 2). To use I2SWIN, the following preconditions are required:
SAPlpd 32 bit version, from 4.00
Microsoft Windows NT 4.0 or eastern European Win95 (Latin 2 version)
R/3 Release 3.0E or higher
Important note: Microsoft Windows 3.1 (SAPlpd 16 bit) is NOT supported!
I7SWIN
Device type for Greece for printing under Microsoft Windows via SAPlpd 32 bit. I7SWIN uses character set "ISO 8859/7" (Greek). Requirements for operation of I7SWIN are:
SAPlpd 32 bit as of Version 4.00
MS Windows NT 4.0 or Greek Windows 95
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
NEW DEVICE TYPES IN RELEASE 4.5A:
HPLJ4000
Device type for the Hewlett Packard LaserJet 4000 printer and
related models such as LaserJet 5000, 8000, 8100 and 8150.
HPLJ4000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ4000 offers improved output of ABAP print lists by using a special PCL-5-printer drivers and can therefore only be used in Releases as of 4.5A.
I9HP4
Device type for Turkey for all printers of the Hewlett-Packard LaserJet 4 printer series (among others LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). I9HP4 uses character set "ISO 8859/9" (Latin 5). OCR-A/ OCR-B are contained in the device type, however, the printer needs extra firmware or an extra font cartridge. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a corresponding SIMM module is needed for this. The SIMM module "JetCAPS Intelligent Barcode SIMM" is a requirement for printing barcodes from R/3 with printers of the HP LaserJet 4 series and is supported.
KYOFS170
Device type for the Kyocera laser printer FS-1700. OCR fonts are not supported. Barcode printing is supported.
Device type KYOFS170 offers improved output of ABAP print lists by using a special PRESCRIBE-II-printer driver and can therefore only be used in Releases as of 4.5A.
POST2
New device type for PostScript-level-2-printer which can be used alternatively to POSTSCPT. Barcode printing and OCR printing from R/3 is not supported.
Device type POST2 offers an improved output of ABAP print lists by using a special PostScript-L2-printer driver and can therefore only be used in Releases as of 4.5A.
NEW DEVICE TYPES IN RELEASE 4.6A:
IXLINK
Device type for the external XLink/SAP translator of Xerox, which translates R/3 SAPGOF data to Xerox format and transfers data to the Xerox production printer. IXLINK can only be used if the XLink/SAP translator is being used. You cannot access printers, which are connected via R/3!
OCR-A and OCR-B fonts as well as bar codes are supported.
NEW DEVICE TYPES IN RELEASE 4.6C:
HPLJ8000
Device type for Hewlett Packard LaserJet 8000, 8000N, 8000DN printers. HPLJ8000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ8000 offers improved output of ABAP print lists by using a special PCL-5-printer driver and can therefore only be used in Releases as of 4.5A.
HPLJ1100
Device type for Hewlett Packard LaserJet 1100 printer. HPLJ1100 uses character set "ISO 8859/1" (Latin 1). OCR-A/B as well as barcode print from R/3 are not supported.
Device type HPLJ1100 can only be used in Releases as of 4.6C.
I9SWIN
Device type for Turkey und printing with MS Windows via SAPlpd 32 bit. I9SWIN uses character set "ISO 8859/9" (Latin 5). Preconditions for using I9SWIN:
SAPlpd 32 bit as of version 4.00
MS Windows NT 4.0 or Turkish Windows 95 (Latin 5 Version)
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
IBMNP
Device type for laser printer IBM InfoPrint 20 as well as the IBM Network Printer 12, 17, 24, IBM InfoPrint 32, InfoPrint 40. OCR- and MICR fonts are supported by the device type. The printer needs an additional module for these fonts. "Barcode-, MICR and OCR A+B SIMM for IBM Network Printers" is required. Read Note 133660 also. Bar code printing from R/3 is not supported.
Important note: IBMNP uses new 4.0A features (scaleable font under PCL-5) and can only be used in maintenance level 4.0A and higher.
NEW DEVICE TYPES IN RELEASE 6.10:
IBMIP12
Device type for laser printer IBM InfoPrint 12. IBMIP12 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP21
Device type for laser printer IBM InfoPrint 21. IBMIP21 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP32
Device type for laser printers IBM InfoPrint 32 and InfoPrint 40. IBMIP32 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP2K
Device type for production laser printer IBM InfoPrint 2000 with PCL-5 emulation. IBMIP2K uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP60
Device type for laser printer IBM InfoPrint 60. IBMIP60 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP70
Device type for laser printer IBM InfoPrint 70. IBMIP70 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBM4247
Device type for line printer IBM 4247. The printer's 4247 emulation and character set IBM2 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
NEW DEVICE TYPES IN RELEASE 6.20:
IBM6400
Device type for line printer IBM 6400. The printer's "P-Series" emulation and character set PC850 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
HP1200
Device type for HP LaserJet 1200/1220. HP1200 uses character set "ISO 8859/1" (Latin 1).
HP1200 is compatible with all releases from 4.0A.
HP2200
Device type for HP LaserJet 2200. HP2200 uses character set "ISO 8859/1" (Latin 1).
HP2200 is compatible with all releases from 4.0A.
HP2250
Device type for HP Business Inkjet 2250. HP2250 uses character set "ISO 8859/1" (Latin 1).
HP2250 is compatible with all releases from 4.5B.
Attention: Business Inkjet 2200 is not compatible with HP2250.
HP2500
Device type for HP DeskJet 2500C with PCL-5 option. HP2500 uses character set "ISO 8859/1" (Latin 1).
HP2500 is compatible with all releases from 4.0A.
HP3200
Device type for HP LaserJet 3200m. HP3200 uses character set "ISO 8859/1" (Latin 1).
HP3200 is compatible with all releases from 4.0A.
HP4100
Device type for HP LaserJet 4100. HP4100 uses character set "ISO 8859/1" (Latin 1).
HP4100 is compatible with all releases from 4.0A.
HP4550
Device type for HP LaserJet 4550 (color laser). HP4550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP8150
Device type for HP LaserJet 8150. HP8150 uses character set "ISO 8859/1" (Latin 1).
HP8150 is compatible with all releases from 4.0A.
HP8550
Device type for HP LaserJet 8550 (color laser). HP8550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP9000
Device type for HP LaserJet 9000. HP9000 uses character set "ISO 8859/1" (Latin 1).
HP9000 is compatible with all releases from 4.0A.
NEW DEVICE TYPES IN RELEASE NW04:
BRHL
Device type for Brother laser printer HL-2460. This device type is compatible to other Brother laser printers, see below.
OCR-A and OCR-B fonts as well as bar codes are supported.
BRHL is compatible with all releases from 4.5A.
IP2085
Device type for the IBM Infoprint 2085 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2085 is compatible with all releases 4.5A and higher.
IP2085P
Device type for the IBM Infoprint 2085 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2085P is compatible with all releases 4.5A and higher.
IP2105
Device type for the IBM Infoprint 2105 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2105 is compatible with all releases 4.5A and higher.
IP2105P
Device type for the IBM Infoprint 2105 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2105P is compatible with all releases 4.5A and higher.
LEXT622
Device type for the Lexmark T622 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXT622 is compatible with all releases 4.5A and higher.
LEXW820
Device type for the Lexmark W820 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXW820 is compatible with all releases 4.5A and higher.
LEX4227P
Device type for the Lexmark 4227plus line printer. The device type supports the Latin-1 character set. For using the device type, the IBM emulation must be set in the printer.
OCR fonts and barcode printing from SAP are not supported.
LEX4227P is compatible with all releases.
I5LEX
Device type for Cyrillic printing (e.g. Russian) with Lexmark T522 laser printer. Lexmark T522 natively supports Cyrillic fonts and character set ISO 8859-5.
OCR-fonts are not supported. Bar code printing is supported (with a bar code DIMM, see note 119471).
I5LEX is compatible with all releases 4.0A and higher.
CNLX522
Device type for Lexmark T522 laser printer with add-on "Simplified Chinese DBCS font DIMM kit" (Lexmark product number 09H0690). The device type supports Simplified Chinese. OCR-fonts and bar code printing from SAP are not supported.
CNLX522 is compatible with all releases 4.0A and higher.
JPLX522
Device type for Lexmark T522 laser printer with add-on "Japanese DBCS font DIMM kit" (Lexmark product number 13K0227). The device type supports Japanese character set. OCR-fonts and bar code printing from SAP are not supported.
JPLX522 is compatible with all releases 4.0A and higher.
KPLX522
Device type for Lexmark T522 laser printer with add-on "Korean DBCS font DIMM kit" (Lexmark product number 10G1705). The device type supports Korean character set. OCR-fonts and printing of bar codes from SAP are not supported.
KPLX522 is compatible with all releases 4.0A and higher.
TWLX522
Device type for Lexmark T522 laser printer with add-on "Traditional Chinese DBCS font DIMM kit" (Lexmark product number 09H0691). The device type supports traditional Chinese character set. OCR-fonts and bar code printing from SAP are not supported.
TWLX522 is compatible with all releases 4.0A and higher.
HP5000
Device type for HP LaserJet 5000. HP5000 uses character set "ISO 8859/1" (Latin 1).
HP5000 is compatible with all releases from 4.0A.
HP23
Device type for HP LaserJet 2300. HP23 uses character set "ISO 8859/1" (Latin 1).
HP23 is compatible with all releases from 4.5A.
HP3000
Device type for HP business inkjet 3000. HP3000 uses character set "ISO 8859/1" (Latin 1).
HP3000 is compatible with all releases from 4.5A.
HP4300
Device type for HP LaserJet 4200 and HP LaserJet 4300. HP4300 uses character set "ISO 8859/1" (Latin 1).
HP4300 is compatible with all releases from 4.5A.
HP4600
Device type for HP color LaserJet 4600. HP4600 uses character set "ISO 8859/1" (Latin 1).
HP4600 is compatible with all releases from 4.5A.
HP5100
Device type for HP LaserJet 5100. HP5100 uses character set "ISO 8859/1" (Latin 1).
HP5100 is compatible with all releases from 4.5A.
HP5500
Device type for HP color LaserJet 5500. HP5500 uses character set "ISO 8859/1" (Latin 1).
HP5500 is compatible with all releases from 4.5A.
HP9500
Device type for HP color LaserJet 9500. HP9500 uses character set "ISO 8859/1" (Latin 1).
HP9500 is compatible with all releases from 4.5A.
I2HPPS
Device type for certain HP LaserJet models with PostScript emulation (see Note 575916). I2HPPS supports character set "ISO 8859/2" (Latin 2).
I2HPPS is compatible with all releases as of 4.0A.
Barcode printing and OCR fonts are not supported.
CAN105
Device type for Canon laser printer imageRUNNER 105. CAN105 supports character set ISO 8859-1 (Latin 1).
CAN105 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN22
Device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CAN22 supports character set ISO 8859-1 (Latin 1).
CAN22 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN5
Device type for Canon laser printers imageRUNNER 5000/5000i/6000. CAN5 supports character set ISO 8859-1 (Latin 1).
CAN5 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN85
Device type for Canon laser printers imageRUNNER 8500/7200/85. CAN85 supports character set ISO 8859-1 (Latin 1).
CAN85 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CN105PS
PostScript device type for Canon laser printer imageRUNNER 105. CN105PS supports character set ISO 8859-1 (Latin 1).
CN105PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN22PS
PostScript device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CN22PS supports character set ISO 8859-1 (Latin 1).
CN22PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN5PS
PostScript device type for Canon laser printer imageRUNNER 5000/5000i/6000. CN5PS supports character set ISO 8859-1 (Latin 1).
CN5PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN85PS
PostScript device type for Canon laser printer imageRUNNER 8500/7200/85. CN85PS supports character set ISO 8859-1 (Latin 1).
CN85PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CAN400
PCL5 device type for Canon laser printer imageRUNNER 330/400. CAN400 supports character set ISO 8859-1 (Latin 1).
CAN400 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN400PS
PostScript device type for Canon laser printer imageRUNNER 330/400. CN400PS supports character set ISO 8859-1 (Latin 1).
CN400PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CANC32
PCL5 device type for Canon color laser printer Color imageRUNNER C3200. CANC32 supports character set ISO 8859-1 (Latin 1).
CANC32 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
NEW DEVICE TYPES IN RELEASE SAP NetWeaver 04s:
ARM205
PCL-5 device type for Sharp laser printer AR-M205. ARM205 uses character set ISO 8859-1 (Latin-1).
ARM205 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM276
PCL-5 device type for Sharp laser printer AR-M276. ARM276 uses character set ISO 8859-1 (Latin-1).
ARM276 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM450
PCL-5 device type for Sharp laser printer AR-M450. ARM450 uses character set ISO 8859-1 (Latin-1).
ARM450 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM550
PCL-5 device type for Sharp laser printer AR-M550U. ARM550 uses character set ISO 8859-1 (Latin-1).
ARM550 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARC262P
PostScript device type for Sharp color laser printer ARC-262M. ARC262P is compatible with all releases as of 4.5A.
OCR fonts are not supported.
CAN2220
PCL5 device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CAN2220 supports character set ISO 8859-1 (Latin 1).
CAN2220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN2220P
PostScript device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CN2220P supports character set ISO 8859-1 (Latin 1).
CN2220P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CAN5020
PCL5 device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CAN5020 supports character set ISO 8859-1 (Latin 1).
CAN5020 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN5020P
PostScript device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CN5020P supports character set ISO 8859-1 (Latin 1).
CN5020P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3100
PCL5 device type for Canon color laser printer imageRUNNER C3100. CNC3100 supports character set ISO 8859-1 (Latin 1).
CNC3100 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC31PS
PostScript device type for Canon color laser printer imageRUNNER C3100. CNC31PS supports character set ISO 8859-1 (Latin 1).
CNC31PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3220
PCL5 device type for Canon color laser printers imageRUNNER C3220/C2620. CNC3220 supports character set ISO 8859-1 (Latin 1).
CNC3220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC322P
PostScript device type for Canon color laser printers imageRUNNER C3220/C2620. CNC322P supports character set ISO 8859-1 (Latin 1).
CNC322P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC6800
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800. CNC6800 supports character set ISO 8859-1 (Latin 1).
CNC6800 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC68PS
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800. CNC68PS supports character set ISO 8859-1 (Latin 1).
CNC68PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31E
PCL5 device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31E supports character set ISO 8859-1 (Latin 1).
CNC31E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31EP
PostScript device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31EP supports character set ISO 8859-1 (Latin 1).
CNC31EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322E
PCL5 device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322E supports character set ISO 8859-1 (Latin 1).
CNC322E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322EP
PostScript device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322EP supports character set ISO 8859-1 (Latin 1).
CNC322EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68E
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68E supports character set ISO 8859-1 (Latin 1).
CNC68E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68EP
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68EP supports character set ISO 8859-1 (Latin 1).
CNC68EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CN2270
PCL5 device type for Canon laser printers imageRUNNER 2270/2870/3570/4570. CN2270 supports character set ISO 8859-1 (Latin 1).
CN2270 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is supported with usage of the optional barcode printing kit.
CN2270P
PostScript device type for Canon laser printer imageRUNNER 2270/2870/3570/4570. CN2270P supports character set ISO 8859-1 (Latin 1).
CN2270P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
DL3100
PCL5 device type for DELL color laser printer 3100cn. DL3100 supports character set ISO 8859-1 (Latin 1).
DL3100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL3100P
PostScript device type for DELL color laser printer 3100cn. DL3100P supports character set ISO 8859-1 (Latin 1).
DL3100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100
PCL5 device type for DELL color laser printer 5100cn. DL5100 supports character set ISO 8859-1 (Latin 1).
DL5100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100P
PostScript device type for DELL color laser printer 5100cn. DL5100P supports character set ISO 8859-1 (Latin 1).
DL5100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
HP3700
Device type for HP color LaserJet 3700. HP3700 supports character set ISO 8859-1 (Latin 1).
HP3700 is compatible with all releases as of 4.5A.
HPBI23
Device type for HP business inkjet 2300. HPBI23 supports character set ISO 8859-1 (Latin 1).
HPBI23 is compatible with all releases as of 4.0A.
HP9055
Device type for HP LaserJet 9055mfp. HP9055 supports character set ISO 8859-1 (Latin 1).
HP9055 is compatible with all releases as of 4.5A.
HP9065
Device type for HP LaserJet 9065mfp. HP9065 supports character set ISO 8859-1 (Latin 1).
HP9065 is compatible with all releases as of 4.5A.
I7HP4
Device type for HP LaserJet printers with "Greek Font DIMM" (add-on module with Greek fonts). Information can be found under www.hp.com/go/sap/drivers. I7HP4 supports character setISO 8859/7 (Greek).
I7HP4 is compatible with all releases as of 4.6B.
HP4250
Device type for HP LaserJet 4250 printer. HP4250 supports character set ISO 8859-1 (Latin 1).
HP4250 is compatible with all releases as of 4.5A.
HP1160
Device type for HP LaserJet 1160 printer. HP1160 supports character set ISO 8859-1 (Latin 1).
HP1160 is compatible with all releases as of 4.5A.
HP1320
Device type for HP LaserJet 1320 printer. HP1320 supports character set ISO 8859-1 (Latin 1).
HP1320 is compatible with all releases as of 4.5A.
HP2430
Device type for HP LaserJet 2430 printer. HP2430 supports character set ISO 8859-1 (Latin 1).
HP2430 is compatible with all releases as of 4.5A.
HP3030
Device type for HP LaserJet 3030 printer. HP3030 supports character set ISO 8859-1 (Latin 1).
HP3030 is compatible with all releases as of 4.5A.
HP4650
Device type for HP Color LaserJet 4650 printer. HP4650 supports character set ISO 8859-1 (Latin 1).
HP4650 is compatible with all releases as of 4.5A.
HP5550
Device type for HP Color LaserJet 5550 printer. HP5550 supports character set ISO 8859-1 (Latin 1).
HP5550 is compatible with all releases as of 4.5A.
HP9850
Device type for HP 9850mfp. HP9850 supports character set ISO 8859-1 (Latin 1).
HP9850 is compatible with all releases as of 4.5A.
HPLJ9050
Device type for HP LaserJet 9050 printer. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5A.
HPOJ9130
Device type for HP officejet 9130. HPOJ9130 supports character set ISO 8859-1 (Latin 1).
HPOJ9130 is compatible with all releases as of 4.0B.
HP4345
Device type for HP LaserJet 4345mfp. HP4345 supports character set ISO 8859-1 (Latin 1).
HP4345 is compatible with all releases as of 4.5B.
HP9040
Device type for HP LaserJet 9040mfp. HP9040 supports character set ISO 8859-1 (Latin 1).
HP9040 is compatible with all releases as of 4.5B.
HP9050
Device type for HP LaserJet 9050mfp. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5B.
HP9500M
Device type for HP LaserJet 9500mfp. HP9500M supports character set ISO 8859-1 (Latin 1).
HP9500M is compatible with all releases as of 4.5B.
IP2060
Device type for the IBM Infoprint 2060ES Laser printer with printer language PCL-5. IP2060 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2060 is compatible with all releases 4.5A and higher.
IP2060P
Device type for the IBM Infoprint 2060ES Laser printer with printer language PostScript. IP2060P supports character set ISO 8859-1 (Latin 1).OCR font and bar code printing from SAP are not supported.
IP2060P is compatible with all releases 4.5A and higher.
IP2075
Device type for the IBM Infoprint 2075ES Laser printer with printer language PCL-5. IP2075 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075 is compatible with all releases 4.5A and higher.
IP2075P
Device type for the IBM Infoprint 2075ES Laser printer with printer language PostScript. IP2075P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075P is compatible with all releases 4.5A and higher.
IP2090
Device type for the IBM Infoprint 2090ES Laser printer with printer language PCL-5. IP2090 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090 is compatible with all releases 4.5A and higher.
IP2090P
Device type for the IBM Infoprint 2090ES Laser printer with printer language PostScript. IP2090P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090P is compatible with all releases 4.5A and higher.
IP2105E
Device type for the IBM Infoprint 2105ES Laser printer with printer language PCL-5. IP2105E supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105E is compatible with all releases 4.5A and higher.
IP2105EP
Device type for the IBM Infoprint 2105ES Laser printer with printer language PostScript. IP2105EP supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105EP is compatible with all releases 4.5A and higher.
OKI6100
Device type for OKI laser printer B6100. OKI6100 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6100 is compatible with all releases as of 4.5A.
OKI8300
Device type for OKI laser printer B8300. OKI8300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are not supported. Barcode printing is supported with an OKI add-on product.
OKI8300 is compatible with all releases as of 4.5A.
OKI9500
Device type for OKI color laser printer C9500. OKI9500 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI9500 is compatible with all releases as of 4.5A.
OKI4350
Device type for OKI laser printer B4350. OKI4350 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI4350 is compatible with all releases as of 4.5A.
OKI5400
Device type for OKI color laser printer C5400. OKI5400 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI5400 is compatible with all releases as of 4.5A.
OKI6300
Device type for OKI laser printer B6300. OKI6300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6300 is compatible with all releases as of 4.5A.
SML1451, SML1451

Re-Using XML file from decode barcode + extract xml process

I was hoping someone could put me in the right direction here. I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the Decode->Extract XML process.
The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
<?xml version="1.0" encoding="UTF-8"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
<xfa:data>
<form1>
The XML structure that is expected by the PDF template is as follows
<?xml version="1.0" encoding="UTF-8"?>
<form1>
So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
Thanks

Hi,
What you may do is to use the SetValue and its xpath builder functions to "serialize" the xml into string, "substring" to remove the extra tags, and "concat" to add the extra tags and then "deserialize" it again to an xml to be merged with your form.
Greetings,
Yasser

Additional Barcode readings in LM46

Similar Messages

Maybe you are looking for