Additional BlackBerry service from provider still needed???

Hi. There I aske my provider (T-Mobile Germany) if the additional BlackBerry service you had to rent for the "classic" smarphones like my Bold 9700 is still needed for the z10. The gal at the phone didn't know.
Do you???
Solved!
Go to Solution.

Hello,
It is confirmed that BIS is not required for BB10. But, beyond that there remain many differences and things continue to change. The carriers must re-work their networks in order to continue to support legacy as well as BB10 devices, since they each work so differently. In that process, there have been many different reports.
Some report their carrier telling them they must keep BIS active on their Z10 until the carrier finishes their reconfiguration, at which time BIS can be dropped. Others report that they can get no services on their Z10 if BIS is at all active with their carrier for their device. Still others report services (both legacy as well as BB10) stopping, starting, stopping again, then starting again.
All in all, you need to talk to your specific carrier...they control what is required on their network as well as how their network is configured.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Error While creating ABAP Consumer Service using Provider service WSDL.

HI Friends,
We are trying to consume service from Provider service.
Provider service is developed on CE 7.11-NWDS7.11 and published in CE7.11 registry.(used outside in method and implemented in EJB/Deployed/Published/tested) sounds good.
We are trying to consume in ABAP (ECC 6.0 EHP4 SPS16).
when we are trying to create service consumer from se80 selected url : provider WSDL picked up from from Service registry.
At the end of wizard its throwing error.
error description.
Message Policy in Name space "http://schemas.xmlsoap.org/ws/2004/09/policy " is not unique in WSDL.
Unable to generate proxy.
Any pointers to resolve this.
Regards
Chandra

I would suggest to test the service in XML Spy using the same WSDL or the URL of the WSDL. If XML Zpy throws the same error, there could be some problem in the provider service generation itself..!!
VJ

Limit of 500 msgs on E62 w/ Blackberry Service?

I have the Nokia E62 with Blackberry service from Cingular in the US. I have 2 email accounts configured on the device: a corporate one using Blackberry Enterprise Server & a personal one through my ISP. Both accounts get maxed out at 500 emails each. After 500 emails, the unit starts deleting the least recent message.
I have talked to Cingular about this a couple of times & they have indicated that there shouldn't be a limit.
Any ideas from anyone?

You really should try to paragraph if you want people to read your rant. Mary

New to Web Services - need to call a HTTPS web service from PL/SQL

I am new to Web Services and need to call HTTPS web service from PL/SQL program. I am using 10g Database.
I have been reading there are 2 options -
1. UTL_HTTP - with this package its possible to call HTTPS web services
2. UTL_DBWS
Questions -
1. Is it possible to call a HTTPS web service using UTL_DBWS ? I have not been able to find any information on it.
2. Can someone point me to UTL_HTTP and UTL_DBWS examples calling a HTTPS web service ?
3. The HTTPS web service that I need to call needs username/password to connect - how will I incorporate this in the pl/sql code ?
Appreciate the help.
Cheers,
newWebServicesUser

Hi,
1. UTL_DBWS not work for https from what I understand
2. Here is a sample example:
[http://www.oracle-base.com/articles/9i/ConsumingWebServices9i.php#]
Be careful, you must change http/1.0 IN 1.1 inside package SOAP_API.
Here is an example for a prime number where the SOAP message is already construct:
CREATE OR REPLACE procedure test_ws_2
IS
http_req utl_http.req;
http_resp utl_http.resp;
request_env varchar2(32767);
response_env varchar2(32767);
begin
-- Set proxy details if no direct net connection.
UTL_HTTP.set_proxy('http://<USER>:<PASS>@10.0.2.21:8070', NULL);
UTL_HTTP.set_persistent_conn_support(TRUE);
request_env:='<?xml version="1.0" encoding="utf-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">'||
'<SOAP-ENV:Body><GetPrimeNumbers xmlns="http://microsoft.com/webservices/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'||
'<max xsi:type="xsd:int">10</max>'||
'</GetPrimeNumbers></SOAP-ENV:Body></SOAP-ENV:Envelope>';
dbms_output.put_line('Length of Request:' || length(request_env));
dbms_output.put_line ('Request: ' || request_env);
http_req := utl_http.begin_request('http://www50.brinkster.com/vbfacileinpt/np.asmx','POST', utl_http.HTTP_VERSION_1_1);
utl_http.set_header(http_req, 'Content-Type', 'text/xml; charset=utf-8');
utl_http.set_header(http_req, 'Content-Length', length(request_env));
utl_http.set_header(http_req, 'SOAPAction', '"http://microsoft.com/webservices/GetPrimeNumbers"');
utl_http.write_text(http_req, request_env);
dbms_output.put_line('');
http_resp := utl_http.get_response(http_req);
dbms_output.put_line('Response Received');
dbms_output.put_line('--------------------------');
dbms_output.put_line ( 'Status code: ' || http_resp.status_code );
dbms_output.put_line ( 'Reason phrase: ' || http_resp.reason_phrase );
utl_http.read_text(http_resp, response_env);
dbms_output.put_line('Response: ');
dbms_output.put_line(response_env);
utl_http.end_response(http_resp);
end test_ws_2;
Otherwice for testing url, i recommand you to use that function: Re: Error using UTL_HTTP over HTTPS
it's a verry helpful function when you have an error.
wrote:
When testing using UTL_HTTP, you MUST ensure that you open a new session after importing the SSL certificates into your Wallet,
as I've learned (the hard way) that existing sessions point to the wallet contents that were present when the session was opened.
If you don't realise/know this, it can cause a lot of additional frustration during testing, when you keep getting the ORA-29024 exception AFTER
you've imported the SSL certificates................. ;) 3. i think you can use that after the begin_request but not sure :
UTL_HTTP.set_authentication(r => http_req,
username => ,
password => ,
scheme => ,
for_proxy => );
Edited by: Malebodja on Oct 22, 2009 6:53 AM
Edited by: Malebodja on Oct 22, 2009 6:55 AM

My membership is activated, why I still need to provide a serial number??

My membership is activated, why I still need to provide a serial number??

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

Pathetic Service from BlackBerry

Hello
This is a complain for the pathetic service from your service centre in Lucknow India
I purchased a Z30 few months back, some days later I started facing speaker and led issues the upper speaker was not working then I visited your service centre here, they said that they'll have to send it to your Bangalore head office and it will not take more than 25 days to solve my problem.
After 25 days I called your service centre and they said it's still in the head office and will take 1 week and they are replacing my phone with new after a week they again asked for a week and this is what I hear every time I call them and they are still not sure when they are going to give it back.
I submitted it on 9th January it's been over 50 days now still I haven't got it back and I'm facing many problems because of it.
I am a BlackBerry fan since a log time and I own 2 more BlackBerry smartphones but I never expected this from you guys and now I am really disappointed, your fan base is already getting weak day by day and this way you ll lose your left valuable fan base.
I was planning for a passport but now I think I should better go for iphone 6 because I am really disappointed and if I didn't get my smartphone soon m gonna say bye to all my BlackBerrys forever and will never recommend it to anyone.

Hi @yashkapoor, I've sent you a private message. Thanks!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

How to upgrade firmware on Curve 8520 from v4.6 - v5 (don't have active Blackberry service account)

Hello
I have a Blackberry Curve 8520 runningt v4.6 formware. I see5.0 Bundle 1168 (v5.0.0.681 firmware is avaiable, platform 5.2.0.67), but I can't install it because I don't have an active service account. I get that error when I try upgrade it using USB cable and the Blackberry desktop software.
Any ideas how to upgrade or create and register one of these active service accounts?
I need to upgrade so that I can use USB MTP (which is not present in the current v4.6 firmware)
Many thanks
rich

Hi and Welcome to the Community!
From your post, I cannot quite tell the specific process you are attempting...so I will give you everything...
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6) Disconnect your PC from the internet and turn off all radios on your BB (consider also removing the SIM...not likely necessary, but just in case)
76a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
7b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 7a or 7b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

jengrz wrote:
My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
TechCrunch posted a solution today that applies to this problem, I think.
Go to: https://supportprofile.apple.com/MySupportProfile.do
Click your old iPhone and "unregister" it.
More info here:
http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

I purchased my macbook pro on the 18th of june 2011, do i still need to purchase the lion or is there a way of getting it from mac complimentry ?

I purchased my macbook pro on the 18th of june 2011, do i still need to purchase the lion or is there a way of getting it from mac complimentry ?

OS X Lion - Get up to date

Hi all, I'm trying to download a film from iTunes onto my iPad but downloaded the HD version instead of SD and don't have the room to download it. Have removed everything I can to make space but still need another 1.2 GB. How can I delete it??

Hi all, I'm trying to download a film from iTunes onto my iPad but downloaded the HD version instead of SD and don't have the room to download it. Have removed everything I can to make space but still need another 1.2 GB. Is there any way I can delete it so I can delete the version I wanted, or even better change to the SD version? The film is still queuing in the downloads list. I've tried edit and delete but that doesn't work. I also can't re-download the film from iTunes.
Any suggestions very welcome!

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

ITunes suddenly mentions that my iPhone cannot be synced because it needs 6.55 additional GB, although my phone still has 2 GB free of space. How can I fix this?

iTunes suddenly mentions that my iPhone cannot be synced because it needs 6.55 additional GB, although my phone still has 2 GB free of space. How can I fix this?
iCloud is off on both my phone and my computer.

It is saying that the iPod does not have enough free storage to sync all the items yu have selected to sync to the iPod. You need 2.48 GB more free on the iPod. You need either to select less to sync or delete some content form the iPod.

I am trying to sync an ipod touch 4TH gen. The capacity bar at the bottom shows I am adding 22.29g with 6.5 g free. Yet every time I try to sync it warns that there is not enough room say an additional 868.9m still needed. Does the capacity bar tend to

I am trying to sync an ipod touch 4TH gen. The capacity bar at the bottom shows I am adding 22.29g with 6.5 g free. Yet every time I try to sync it warns that there is not enough room an additional 868.9m is still needed. Does the capacity bar tend to be wrong or am I missing something?

Well when all else fails do a restore! This fixed my problem. Still don't know why the content bar differed, but what the hey!

I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford

I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford that monthly charge.

You can download from the page linked below:
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

Help needed with process to call an external web service from within ABAP

Hello,
I have an understanding of how I can provision web service from within SAP so that it can be consumed by external apps.
Now, I am in need to know the, how I can call an external non-sap web service (let's say a java application) or even a public domain web service for that matter:
Is there any lay man's guide out there? which will list following step:
A sample ABAP program calling an external web service
List of all the configurations needed within SAP to make this happen (calling an external web service).
Any help will be greatly appreciated.

Hi Matesh,
Please use the following command in Google : site:sdn.sap.com abap consuming web service
There is many samples of your needs on SDN.
Like this one :
http://wiki.sdn.sap.com/wiki/display/Snippets/WebServiceconsumerusingABAP-PROXY
Regards, Gilles.

[svn] 2510: -add back in the \frameworks\libs\player\9 folder - we still need the playerglobal .swc from player 9

Revision: 2510
Author: [email protected]
Date: 2008-07-16 10:37:39 -0700 (Wed, 16 Jul 2008)
Log Message:
-add back in the \frameworks\libs\player\9 folder - we still need the playerglobal.swc from player 9
Added Paths:
flex/sdk/trunk/frameworks/libs/player/9/

I Reset Internet Explorer Settings and so far, everything
seems to be working fine!
http://support.microsoft.com/kb/923737
I have XP SP2 Home Edition and never got an answer to the
question if I can use SubInACL.

Additional BlackBerry service from provider still needed???

Similar Messages

Maybe you are looking for