Additional cables needed

When hooking up the Airport, what kind of additional cable do I need to connect my modem?   If there's a diagram schematic to show the final connections, that would be great.

Sorry - I didn't see Extreme listed below your question - here is the diagram - http://support.apple.com/kb/HT4259 - follow the instructions for one Extreme -

Similar Messages

  • Can't download the additional components needed to install mac os x, what shall i do?

    can't download the additional components needed to install mac os x, check your internet connection and try again-  that's the error always showing when im reinstalling the os on my macbook air. what shall i do? please i need help.

    Not sure 10.7.3 is still available over the internet download system. I think Apple waws more on the ball this time and switched the Recovery HD system download over to 10.7.4 fairly Quickly.
    That may or may not be part of your problem.
    It may also be your internet connection is flakey and is dropping the connection with the download server.
    If you are doing this over a WiFi connection try connecting the Mac to your router with an Ethernet cable.

  • The additional components needed to install mac os x cant be found

    help, i did a clean reinstall using a USB, now its saying "the additional components needed to install mac os x cant be found" what do i do? i wiped my whole computer!...

    Not on my late 2011 15" MBP. When I use just Cammond+r it takes me to the built in recovery HD.
    Even with no HDD in the system Command+r gives me nothing, no options at all and certainly not the Internet Recovery system.
    Command+Option+r gives me the Internet Recovery system with or without a HDD in the system and with or without a Recovery HD partition on the internal drive.
    So it would seem it is different for different models and whether or not there is or isn't a recovery partition on the internal drive.
    So for anyone reading this thread try both Command+r and Command+Option+r to boot the computer from the Apple Online Lion Internet Recovery system.
    Thanks.

  • I am performing a clean install of OS X vs. 10.8.5 on a new internal hard drive.  At the end of the installation process the progress bar stalls with a minute to go - error message "Can't download the additional components needed to install OS X" appears

    At the end of the installation process (Clean install, new 500GB internal hard drive, formatted and partitioned, MacBook 13" Aluminum, late 2008) the progress bar stalls and eventually a drop down error message appears "Can't download the additional components needed to install OS X".   I am using a USB 8 GB bootable flash drive.  Any ideas? 

    At the end of the installation process (Clean install, new 500GB internal hard drive, formatted and partitioned, MacBook 13" Aluminum, late 2008) the progress bar stalls and eventually a drop down error message appears "Can't download the additional components needed to install OS X".   I am using a USB 8 GB bootable flash drive.  Any ideas? 

  • Why do I get "Can't download additional components needed to install OSX" - Which prevents installation from completing?, Why do I get "Can't download additional components needed to install OSX" - Which prevents installation from completing?

    After an hour or two of the installation process, with reamining time registering only 7 minutes, a box appears on screen with the message:
    "Can't download additional components needed to installl OS X". I can't get beyond that poiint.  I had not trouble installing Lion yesterday, but three attempts to install Mountain Lion hand up at this same point.  What can I do about it?  (I'm installing to a Mac Mini that I bought in 2012. I have 110 GB free out of 249.67GB.  I have VMWare Fusion installed and that allocates 69.55 to Windows.)

    Try resetting the App Store.
    App Store Reset       Learned from Old Toad

  • Can't download the additional components needed to install mac os x lion

    I recently upgraded the RAM in my MacBook Pro (13-inch, Early 2011) to 16gigs.  The process went smooth at first.  Then the Computer would not boot and stayed on the white Apple screen with the circle spinning. A progress bar would appear and disapear but it would never get past that screen.  I tried to fix that but ended up backing up my hard drive and now I am attempting to restore the unit using "command + R" at startup.  I have eraseed and reformated the drive using with Disk Utilities OSX extend journaled. Then I attempt to reinstall and the unit is connected to my wifi which is fast and stable and I get, "can't download the additional components needed to install mac os x lion."    I have tried this many times

    I still have the 16gigs of ram in the macbook pro which I am told this unit supports both by OWC (which is where i bought it) both identical 2x8gig sticks ddr3 1333

  • Additional components needed.

    When I publish a quicktime movie using iWeb 09, (movie from iphoto 09 -originally from Canon SD870IS camera) I get a message saying "Additional Components Needed." I can hear sound but no video. Anyone have any ideas on how to rectify this problem?

    Not on my late 2011 15" MBP. When I use just Cammond+r it takes me to the built in recovery HD.
    Even with no HDD in the system Command+r gives me nothing, no options at all and certainly not the Internet Recovery system.
    Command+Option+r gives me the Internet Recovery system with or without a HDD in the system and with or without a Recovery HD partition on the internal drive.
    So it would seem it is different for different models and whether or not there is or isn't a recovery partition on the internal drive.
    So for anyone reading this thread try both Command+r and Command+Option+r to boot the computer from the Apple Online Lion Internet Recovery system.
    Thanks.

  • Additional verification needed

    "additional verification needed"
    "additional account verification is necessary to authenticate your Apple ID account"

    this keeps popping up on my phone

  • Do I need to buy any additional cables??

    I'm thinking of buying a 20inch cinema display for my G5, just want to know if I need to buy any cables to connect it to the G5. Talk of DVI is confusing me. I'm not planning to hook up the monitor to anything else but the G5, please let me know.
    Thanks!
    Phil

    The 20"display comes with the video cable attached. It will plug into one of the connectors on the G5's graphics board. It also has FireWire and USB cables that plug into sockets on the back of the G5. It has a power module that will need an electrical outlet. You do not have to buy any cables.

  • Extra power cable needed for a SATA drive in a G4 AGP "Sawtooth"?

    If one adds a SATA controller card and a SATA hard drive to a G4 AGP "Sawtooth", will a power cable like the one at the below link be needed, or would the necessary power cabling ordinarily come with the drive?
    [http://eshop.macsales.com/item/Micro%20Accessories/SATAPAY>
    -John

    Thanks for the additional information, japamac.
    That would be Left (or right angle 270º) for the data cable.
    Which of the below data cables would be more appropriate, the 18" long one or the 39" long one?
    [http://eshop.macsales.com/item/Micro%20Accessories/SATA18L>
    [http://eshop.macsales.com/item/Micro%20Accessories/SATA39L>
    Power connectors would be a left angle 90º to get wires going up.
    I found the below two (the first is the same one linked near the top of this thread):
    [http://eshop.macsales.com/item/Micro%20Accessories/SATAPAY>
    [http://eshop.macsales.com/item/Micro%20Accessories/SATAPA>
    Is it okay to have one of the ends of a "Y" cable remain unconnected? I've done that with my existing ATA power cables, but I wanted make sure that that is also okay with the SATA power cables.

  • DVI to S-Video & Composite plug cable needed for output to audio/TV system

    I'm in need of a DVI to S-Video and Composite plug cable to replace the Monster iTV Link cable I used with my 12" Aluminum PowerBook. (http://www.monstercable.com/apple/Computer.asp) I use it to output to my audio/TV system.
    Whereas the PowerBook used a mini-DVI port and had the audio output jack on the same side of the computer, the MacBook Pro uses a full size DVI port and has the audio jack on the opposite side!
    I've been unable to find a cable so that I can connect up to a TV. Does anyone know where I can find one? Or perhaps a DVI to mini-DVI adapter? Or perhaps a VGA to S-Video/Composite cable and I can use the DVI to VGA adapter that came with the computer?
    This is very frustrating!

    Apple's video adapters have a ROM chip inside them with EDID data contained within the ROM. That is one thing that will definitely be different between the two. The NTSC and PAL version (M9267G/A) gives priority to NTSC. This could cause problems in a PAL country. If you hooked a PAL TV up using this adapter, you might get a rolling (non-synced) screen and you'd have no good way to recover since the image on the screen would be unusable.
    I don't think one adapter would have any advantage over the other in terms of PAL picture quality. It would just be a question of compatibility as outlined above. That's my best guess.

  • I need to transfer video from a camcorder to my iMac what cables needed?

    I have an old Canon Optura 300. I just realized that it still has a tape in it with important memories I would like to preserve. I suppose I could get a disk made, but I would rather do the transfer to my imac myself and have the "tools" needed. According to the Canon tech I spoke with, I need a DV IEEE1394 4-pin cable. But since that's a firewire cable I will also need a converter in order to use it with my iMac. Does getting the "Apple Thunderbolt to FireWire" adapter make sense and is it the right way to go in order to transfer the video onto my computer? Do I need anything else to complete this transfer?
    Just checking—I know there's no better place to go for my answer than this site.  Thanks, Joan (still OS X 10.8.5 for now)

    OK, so that part is correct. Then, do I just hookup and it automatically goes onto my computer? What will capture it, or will it simply show on my desktop and I need to open it with...what?

  • Cable Needed For Dual Monitors iMac 9.1

    Hi,
    I want to connect a (VGA) lcd screen to my imac 9.1 - Intel Core 2 Duo, but i have no idea what cable to buy...
    A DVI to VGA, Mini displayport to VGA, mini DVI to VGA...
    I want to buy this because i want to run 2 monitors, so i have more screen space
    Thanks in advance!

    Hi,
    the iMac 9.1 (otherwise known as the "Early 2009" model) has a Mini DisplayPort output port http://support.apple.com/kb/SP507
    So a Mini DisplayPort to VGA adapter is what you need http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg
    Hope it helps
    Stefan

  • Cable needed to present Keynote from Macbook? In College.

    I have a new Macbook and want to take my macbook so i can present a keynote presentation i created. this will take place at my college, which all classes has a projector (but its mounted on the ceiling) and the projector is connected to a computer, with Windows.
    What cable do I need to connect my macbook to a computer with windows and display it on the projector?
    im not sure if there is a projection connection near the front of the class but if there is, is there a simpler cable to use?
    How much do these cost?

    The above post is correct, but a little more specific to your question - I don't believe you can connect from your mac to a windows machine to display.
    The connections mentioned are what you need. You just have to disconnect from the windows machine and use the adapter to connect to your laptop. I have to do this alot. It's a little pain in the rear but is what you have to do.

  • Cable Needed To Connect To HDTV?

    I have a Macbook and would like to hook it up to my new Vizio HDTV.
    What cable do I need to accomplish this?
    Here is a link to what the connection on the Vizio TV looks like in the back:
    http://img.photobucket.com/albums/v370/WhammX/0805081307.jpg
    Now, here is a link to a cable I already have, though obviously does not connect to that Vizio output:
    http://img.photobucket.com/albums/v370/WhammX/Untitled-1.jpg
    So what cable do I need to purchase so I can connect my Macbook to my Vizio HDTV?

    I dont have any experience with vizio televisions but your best bet (to avoid confusion) is to just finish the set up you already have. You will need to buy a cable like this:
    http://www.provantage.com/belkin-av21401-06~7BELD018.htm
    to connect your laptop adapter to your tv.
    If you want to hook up your sound, then you need a cable like this:
    http://www.milkhoneyland.com/male-35mm-to-male-x-35mm-extension-audio-cable-p-77 2.html
    Plug one end into your "Audio In" port on your television and the other into your laptop headphone jack. You should be able to find both these cables at any local store with an electronics section such as a Walmart or Best Buy.
    Hope this helps

Maybe you are looking for

  • F-48 TDS On vendor Advance Payment.

    Dear All. I am facing one problem. I want to deduct the TDS on advances made to vendor. My entry is like this. 50    Axis Bank-5272-Pmnt        81,340.00- 29A  Rajesh Systems                83,000.00 50    TDS on Contract-194         1,660.00- Is thi

  • Stroke is messed up

    I can not figure out how to re-set my stroke.  Every time I try to change my color it is oulined with the the color.   The T shows that it is in the outline mode but can't change it back to normal type.  Using Indesign CS5.   So frustrated and such a

  • Message problem with number delete

    Hello,I have a concern which I did not see not indexed in the topics. Several contacts of my repertoire changed phone number, I delete the old and write the new. But when I want to write a message to them the old numbers are always available and is d

  • APO: Message number 999999 reached. Log is full

    Hi, We are running program in background to close order with FM BAPI_SALESORDER_CHANGE. The job is failing with messages in Job Log APO: Message number 999999 reached. Log is full APO: Task handler for transaction IZVSlIkXAQxX0000bkikP 0 has not been

  • Problem doing something based on JPanel size

    I have a JPanel (mainPane) with a BorderLayout which stretches to fit the space available to it. In the North I have a title. In the Center I am putting another JPanel (centerPane) (which may be bigger or smaller than the space available). I want to