Additional component needed

I downloaded a movie file (.avi) and the video plays fine in quicktime, however, the audio is not playing. It said that I need and additional quicktime component that mine does not have. What component do I need to download?

To Apple Discussions!
A couple of solutions you can pick from:
Open the file with QuickTime Player.
Open the Movie Info window (Command-i).
Note the name of the video codec used in the file.
Do a Google.com search for codec name +Mac and download one appropriate for your OS and computer.
Quit and relaunch QuickTime after installing the new codec.
Try the file again.
KB article - No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
Another trick: If you have GarageBand installed, open it (maybe open a GarageBand document) and then quit out of the application.
Install the following players: VLC Media Player and/or Perian (AVI and FLV support).
TIP-You should Repair Permissions & restart:
After installing and/or updating an OS (Operating System).
*After installing software.*

Similar Messages

Cannot download additional component

i have follow all the instruction in here and erase the disk, but when i spent around 2 hours to try reintall the os x lion, its will says cant download additional component at the finishing time, can anyone help me on this?

IvanDL wrote:
i have follow all the instruction in here and erase the disk, but when i spent around 2 hours to try reintall the os x lion, its will says cant download additional component at the finishing time, can anyone help me on this?
And those instructions were?
Please detail ALL you have done so far in the way of troubleshooting other than erasing the disk? Need this info to avoid the been there done that scenarios.

The additional components needed to install mac os x cant be found

help, i did a clean reinstall using a USB, now its saying "the additional components needed to install mac os x cant be found" what do i do? i wiped my whole computer!...

Not on my late 2011 15" MBP. When I use just Cammond+r it takes me to the built in recovery HD.
Even with no HDD in the system Command+r gives me nothing, no options at all and certainly not the Internet Recovery system.
Command+Option+r gives me the Internet Recovery system with or without a HDD in the system and with or without a Recovery HD partition on the internal drive.
So it would seem it is different for different models and whether or not there is or isn't a recovery partition on the internal drive.
So for anyone reading this thread try both Command+r and Command+Option+r to boot the computer from the Apple Online Lion Internet Recovery system.
Thanks.

I am performing a clean install of OS X vs. 10.8.5 on a new internal hard drive. At the end of the installation process the progress bar stalls with a minute to go - error message "Can't download the additional components needed to install OS X" appears

At the end of the installation process (Clean install, new 500GB internal hard drive, formatted and partitioned, MacBook 13" Aluminum, late 2008) the progress bar stalls and eventually a drop down error message appears "Can't download the additional components needed to install OS X". I am using a USB 8 GB bootable flash drive. Any ideas?

At the end of the installation process (Clean install, new 500GB internal hard drive, formatted and partitioned, MacBook 13" Aluminum, late 2008) the progress bar stalls and eventually a drop down error message appears "Can't download the additional components needed to install OS X". I am using a USB 8 GB bootable flash drive. Any ideas?

Why do I get "Can't download additional components needed to install OSX" - Which prevents installation from completing?, Why do I get "Can't download additional components needed to install OSX" - Which prevents installation from completing?

After an hour or two of the installation process, with reamining time registering only 7 minutes, a box appears on screen with the message:
"Can't download additional components needed to installl OS X". I can't get beyond that poiint. I had not trouble installing Lion yesterday, but three attempts to install Mountain Lion hand up at this same point. What can I do about it? (I'm installing to a Mac Mini that I bought in 2012. I have 110 GB free out of 249.67GB. I have VMWare Fusion installed and that allocates 69.55 to Windows.)

Try resetting the App Store.
App Store Reset Learned from Old Toad

Can't download the additional components needed to install mac os x lion

I recently upgraded the RAM in my MacBook Pro (13-inch, Early 2011) to 16gigs. The process went smooth at first. Then the Computer would not boot and stayed on the white Apple screen with the circle spinning. A progress bar would appear and disapear but it would never get past that screen. I tried to fix that but ended up backing up my hard drive and now I am attempting to restore the unit using "command + R" at startup. I have eraseed and reformated the drive using with Disk Utilities OSX extend journaled. Then I attempt to reinstall and the unit is connected to my wifi which is fast and stable and I get, "can't download the additional components needed to install mac os x lion." I have tried this many times

I still have the 16gigs of ram in the macbook pro which I am told this unit supports both by OWC (which is where i bought it) both identical 2x8gig sticks ddr3 1333

Can't download the additional components needed to install mac os x, what shall i do?

can't download the additional components needed to install mac os x, check your internet connection and try again- that's the error always showing when im reinstalling the os on my macbook air. what shall i do? please i need help.

Not sure 10.7.3 is still available over the internet download system. I think Apple waws more on the ball this time and switched the Recovery HD system download over to 10.7.4 fairly Quickly.
That may or may not be part of your problem.
It may also be your internet connection is flakey and is dropping the connection with the download server.
If you are doing this over a WiFi connection try connecting the Mac to your router with an Ethernet cable.

Additional components needed.

When I publish a quicktime movie using iWeb 09, (movie from iphoto 09 -originally from Canon SD870IS camera) I get a message saying "Additional Components Needed." I can hear sound but no video. Anyone have any ideas on how to rectify this problem?

Not on my late 2011 15" MBP. When I use just Cammond+r it takes me to the built in recovery HD.
Even with no HDD in the system Command+r gives me nothing, no options at all and certainly not the Internet Recovery system.
Command+Option+r gives me the Internet Recovery system with or without a HDD in the system and with or without a Recovery HD partition on the internal drive.
So it would seem it is different for different models and whether or not there is or isn't a recovery partition on the internal drive.
So for anyone reading this thread try both Command+r and Command+Option+r to boot the computer from the Apple Online Lion Internet Recovery system.
Thanks.

Additional verification needed

"additional verification needed"
"additional account verification is necessary to authenticate your Apple ID account"

this keeps popping up on my phone

No audio, "additional software needed" - yes, but what?

I'm trying to play an .avi file, and there is no sound. QT warns me that "additional software is needed," and links to an Apple download page for various additional codecs/plug-ins. But it doesn't tell me what I need, so I have no idea what to get! Big help.
I've installed Xvid and Divx, the only two I've heard of, and neither have an impact.
How do I figure out what I need to get the sound out of this file?
Thx!

I've installed Xvid and Divx, the only two I've heard of, and neither have an impact.
If you are simply using a trial and error approach and randomly installing components, the Perian would probably be a better choice since its component package supports most codecs commonly used in the AVI wrapper. (If you install it, read the section covering which codecs that may create conflicts.)
How do I figure out what I need to get the sound out of this file?
The normal approach is to check the "Inspector" or 'Info" windows to determine what codecs were used to create the file. In this case, you would check to see what codec was used to compress the audio content.

View of one component need to be used in another component.

Hi Experts,
I have created a view in component BP_DATA . I want to use this view in component "BP_HEAD". Can anyone please help me with the steps needed to make the view available in BP_DATA. Do i need to do any type of binding for this.

Hello Ansal,
For using BP_DATA/yourview in component BP_HEAD, first you will have to expose BP_DATA view in component interface. Then you can access that view in BP_HEAD by creating component usage. Once you add the view of BP_DATA in component usage of BP_HEAD, it will be available as a normal view in this component.
-Regards

Preventing additional component consumption after final confirm in PM Order

Hi,
I am trying to block the consumption of additional components after the final confirmation in a PM order, this is causing erroneous component consp. especially in orders with multiple operations.
The user may choose a confirmed operation while recording a component, system gives an error but it does not prevent the recording of that component, I want the users to get an error and stop there in such a case.
I hope I made myself clear, thanks in advance
IW32 Screen: https://picasaweb.google.com/koray.tulumen/Paylasacaklarim#5707123654338971234

OK once more I thought I should add screens to better tell what I was trying to ask, I could not do that with the old forum layout. Anyways, could I get that result (in the screens) thru customization. There have been other comments relying on Orders' user statuses but with multiple operations they are not usable, every operation is confirmed individually and order status does either let or deny material movements thru the whole order (all operations)
Here are the screens, thanks again.

Additional Field needed!

Hi,
We have a situation where we need to add an additional field "reason for water usage" as an optional field with drop down choices in MAM/MAU
I am new to Mobile.
Kindly let me know how to progress on this.
Regards,
Sanjay

We appreciate your feedback. Please submit you idea in IdeaScale, which can also be accessed directly from within your SAP Cloud for Travel and Expense system > Help Center > Make SAP Cloud for Travel and Expense better. By entering new feature requests in IdeaScale, other users can vote on them. This helps the SAP Development team prioritize new feature requests.

Can't download the additional components needed to install Mac OS X

Hi there, I'm new and a complete novice, please try to have patience I'm hoping to learn but need the right guidance and assistance if possible please :)
Firstly I have read the other articles sharing the same or similar title but most are mentioning using time machine.
I have just fitted a new 1tb SSD to my 13" MacBook Pro after my previous hd was in an unrepairable state. I also purchased a Mac OS X Lion thumb drive with intention of having the latest software on my mac. I obviously don't have any information I want to recover I just merely want to install OS X Lion and begin as if my Macbook was new. But I keep getting the above message. I have gone to disc utilities went through the whole erase process which creates the new partition. Every time I do verify disc is says disc needs repairing so successfully repair it and go back to attempting to install Lion but again it gives me the 'can't download the additional components...' Message. I tried starting up in recovery mode, but from what I have seen on tutorials I should be given the choice of 2 or 3 drives in which to start up on, I only get the option of the OS X Lion thumb drive. Please help me, I really would like to do this myself as a sense of achievement.
My warranty has obviously run out on my mac so this is the reason I changed the HD myself.
Thanks in advanced and feel free to ask questions if you require more details on specifics :)

Hi a Brody, thank you for taking the time to lend some advice. I am able to connect to the internet via wifi, although my internet is not the fastest, would it be better to connect the MacBook up to the router?
I'm not sure if I have tried reformatting my SSD, would it be possible to have some instructions for that please?
With regards to the original install disc it was lost a long time ago, so was told this thumb drive USB stick with OS X Lion mounted (official apple OS X Lion thumb stick) to it would act as an install disc, would I require the initial install disc as it is a fairly old MacBook?
Thanks for your help

Carousel component, need help!?

Hi! I created master/detail form in JDeveloper! Where Carousel is detail form.
I added bean to Carousel component:
public class Carousel {
    public Carousel() {
     * Gets new carusel item and set current row of iterator.
     * @param event
    public void caruselSpin(CarouselSpinEvent event) {
            List l =(List)event.getNewItemKey();
            Key k = (Key)l.get(0);
            DCIteratorBinding iter =
                getDCBindingContainer().findIteratorBinding("AAtteli1Iterator");
            iter.setCurrentRowWithKey(k.toStringFormat(true));
    public DCBindingContainer getDCBindingContainer() {
        return (DCBindingContainer)resolveExpression("#{bindings}");
    public Object resolveExpression(String expression) {
        FacesContext facesContext = FacesContext.getCurrentInstance();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp =
            elFactory.createValueExpression(elContext, expression,
                                            Object.class);
        return valueExp.getValue(elContext);
}So when I run my page I can see something like this: http://my.jetscreenshot.com/2677/20101005-yas0-26kb
When I navigate witth Carousel to last (3 image) then I can see something like this: http://my.jetscreenshot.com/2677/20101005-kwtm-22kb
WHY when I am on first image, I can't see last image in foggy way? And what to do?
To View Images I use: /ImageServletCarousel?Id=#{bindings.ADokumentiPk.inputValue} and imegeServlet.
Hope my question and information is clear and someone can help me. If not clear or need mor information then please let me know.
Best regards, Debuger!

Maybe the problem is in servlet?
package kokaugi.view.servlets;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
public class ImageServlet extends HttpServlet {
    public void doGet(HttpServletRequest req, HttpServletResponse res)
                                             throws ServletException, IOException {
         processResponse(req,res);
     public void doPost(HttpServletRequest req, HttpServletResponse res)
                                             throws ServletException, IOException {
         processResponse(req,res);
     private void processResponse(HttpServletRequest req, HttpServletResponse res)
                                             throws ServletException, IOException{
         String imageId = req.getParameter("Id");
         OutputStream out = res.getOutputStream();
         String amDef = "kokaugi.model.KokaugiModule";
         String config = "KokaugiModuleLocal";
         ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
         ViewObject vo = am.findViewObject("ADokumentiDati1");
         if(imageId != null){
           vo.setWhereClause("A_DOKUMENTI_PK=:img_id_tab");
                      vo.defineNamedWhereClauseParam("img_id_tab", null, null);
                      vo.setNamedWhereClauseParam("img_id_tab", imageId);
                      String query = vo.getQuery();
                      System.out.println(query);
                      vo.executeQuery();
         if(vo.getEstimatedRowCount()==1){
            Row currentRow = vo.first();
            String contentType = (String)currentRow.getAttribute("DokumentaTips");
            if(contentType.equals("image/jpeg") || contentType.equals("image/gif")|| contentType.equals("image/png")){
                    BlobDomain image = (BlobDomain)currentRow.getAttribute("Dokuments");
                    res.setContentType(contentType);
                            InputStream is = image.getInputStream();
                            byte[] buffer = new byte[10 * 1024];
                            int nread;
                            while ((nread = is.read(buffer)) != -1)
                            out.write(buffer, 0, nread);
                            out.flush();
                            out.close();
        Configuration.releaseRootApplicationModule(am, false);
}

Additional component needed

Similar Messages

Maybe you are looking for