Additional Data A in Sales order Item....

Hi,
Where to Configure fields(Material Group1,Material Group 2) in Additional data A in Sales Order Item level??? so that user can select it from Dropdown list.
Any impact on Busines Process???
Regards,
Amol

Hi Amol,
The path for configuring these material groups is:
SPRO>Logistics-General>Materail master>Settings for key fields>Data relevant to sales and distribution-->Define material groups.
Here you can define the material groups and for each group you can define the values also. by double clicking on the groups.
No,It willnot have any impact on the business process at all.
Regards,
Krishna.

Similar Messages

User exit for additional data B for sale order item .

Hi., all
my client requirement is
( This business requirement will make the Last Price for a given item be visible during order entry. )
u2022Retrieve & display during order entry, the most recent unit price given to a customer for a specific item, from the Billing data.
. Display the Last Price under Additional Data B Screen
add new field (last extended price) in additional data b screen.
after that 1.     Using the Sales Order Material Number (VBAP-MATNR), Sales Order Sales Organization (VBAK-VKORG), Sales Order Distribution Channel (VBAK-VTWEG), Sales Order Division (VBAK-SPART), Sales Order Sold-to Number (VBPA-KUNNR for VBPA-PARVW=u2019AGu2019) to access the Billing Items By Material Index Table (VRPMA) and specify a billing date (VRPMA-FKDAT) of less than 60 days from current Sales Order requested delivery date (if specified at header VBAK-VDATU or at the schedule line level (VBEP-EDATU). This will result in all the billing documents where the Sold-to bought the item but isnu2019t completely refined as of yet. Retain the billing document (VRPMA-VBELN), item (VBPMA-POSNR), and billing date (VRPMA-FKDAT) in a temporary table to pass to number 2 as the input.
2.     Use the billing document (VRPMA-VBELN) and item (VRPMA-POSNR) to read the Sales Document Partners Table (VBPA) where the partner function (VBPA-PARVW = u201CSHu201D) and the Sales Order Ship-To (VBPA-KUNNR for VBPA-PARVW=u2019WEu2019) to select ONLY billing documents that are for that given ship-to location. This filters out only billing documents relevant for that ship-to location.
3.     From the resulting list of billing documents, select the most recent date (VRPMA-FKDAT) which will refine the search for the last Billing Document (VRPMA-VBELN) and item (VRPMA-POSNR).
4.     Using the most recent Billing Document (VBPA-VBELN), access the Billing Document Item Table (VBRP). To result in the Last Extended Price as VBRP-KZWI1.
5.     This price will be an extended price which needs to be calculated as a u2018unit priceu2019. For this billing item, select the sales unit (VBRP-VRKME) to determine if the sales unit is in cases or eaches.
a.     If the unit of measure is in cases, then simple math is required to divide the Last Extended Price (VBRP-KZWI1) by the billing quantity (VBRP-FKIMG). Standard rounding should apply when .005 results in a .01.
how to achive this ?

Hi Chakravarthy,
use the Exits provided in SAPMV45A -includes MV45*ZZ and screen exits as well 8309 8310 8459, 8460. Just be sure to
use zznnnnnn include in the SAP provided forms instead of coding directly in the forms.
You can check below user exits:
MV45ATZZ :For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ:
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ:
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1:
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
Reddy

FM for Updating Installation date in Contracts + sales orders Item level

Hi
Plesae give any FM for Updating Installation date in Contracts + sales orders Item level for contracts tab.
Thanks and Regards,
Vishnuvardhan....

Have used the billing transaction to set a Default Billing date at time of blling.

Additional Data B in Sale Order Header / Item

Hi Friends,
Thanks in Advance.
Can we incorporate RADIO BUTTONS Logic in Additional Data B Screens. For me it is triggering Error, i am using ECC 6.0
Regards:
Sridhar.J

Answered by OWN.
Regards:
Sridhar.J

Billing date(fkdat) in sales order item is not copied from Goods Issue Date

Hi All
we are facing problem at item level billing date field.This field should be filled with the GI Date in schedule lines shipping tab.
but, it(billing date) is not being filled with goods issue date but, with the required deliver date at sales order header.
Please give me a solution and the root cause. This is urgent as business is halted.
Thanks
Kumar

Lakshmipati
This is from SAP Screen
"If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date."
earlier it is happening as desired.i.e., billing date=GI Date.
but, as of now it is taken from the required delivery date.
Please give me solution
Kumar

Link between Delivery Header & Sales Order Item for extraction to 2nd level

Hi Guys ,
I am having a requirement that need to pull the following data to 2nd level DSO
1. Delivery Header Data
2. Sales Order Item data. ( Sales Document, Item, Item RDD, Material)
So I am planning create a 2nd level DSO on top of Delivery header and need to pull the sales order ITEM level data ( Sales document , Order ITEM, ITEM RDD date , Material) through start routine u2026
How can I pull the Sales Order Item data through start routine? i.e I need the link between Delivery Header & Sales Order Item Data .
or I need the link between LIKP ( Delivery Header) Vs VBAP ( Sales Document Item).
Thanks
Edited by: krismady on Sep 22, 2010 2:26 AM
or I need the link between LIKP ( Delivery Header) Vs VBAP ( Sales Document Item).

Hi Krish,
You can use VBLEN (Sales Document) to link Delivery header DS (2LIS_12_VCHDR) and Delivery item DS (2LIS_12_VCITM). Now In delivery item DS (2LIS_12_VCITM) you have VGBEL (Reference doc.) and VGPOS (Reference item) which is nothing but sales order document number and sales item in Order item DS (2LIS_11_VAITM) .
So you need to link in above way to get other values in your DSO.
It is proven method.
Thanks,
Uday Shankar.

Sales order item data & sales order schedule data

Hello,
I have a Sales Orders cube which is pulling data from two DSOs (one for sales order item data and the other for sales order schedule data). The common fields between these two DSOs is the Sales Order number but in my cube I have dual entries for each Sales Order document (item and schedule info).
Example of how the data looks now:
Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . 01/02/2000
How do I merge the data on the Sales Order number in the cube so it looks like below?
Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10 . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15 . . . . . . . . . .2 . . . . . . . . 01/02/2000
Many thanks,
Matt

> Hello,
>
> I have a Sales Orders cube which is pulling data from
> two DSOs (one for sales order item data and the other
> for sales order schedule data). The common fields
> between these two DSOs is the Sales Order number but
> in my cube I have dual entries for each Sales Order
> document (item and schedule info).
>
Two previous remarks:
1) If you need to report on very detailed data consider doing an info-set joining both datastores. 2 reasons why:
- not a good idea to report on very detailed information (sales order, GI dates) on cube level, if you have a scenario with lots of data. You end up with big dimension tables a poor report times;
- there are better alternatives, like drill-through from cube query to DS query with report to report interface or Datastore-based reporting...so...
With this solution you do not need to change the data model, I think, but test to be sure. See if the reporting times are acceptable. If not...
2) First confirm your requirements, because what you show in your example as "to-be" have details that do not make sense, probably..
- if you have more that one schedule line for each item then you would have many times the item information like material/price;
- if not or if you could cope with that, then you can consider:
2.1) create a new DS that agregattes from the previous on, with the same key of sales order item; do you have schedule line kf's? if so you these KF's should be additive in DS update; But if you may have more one scheduled line for 1 item then you have to decide what to do with the GI data (keep the last one posted, use code..) and other characteristics.
2.2) update the shedule line datasource to the sales order item DS; same comments apply.
2.3) maintain the missing data in the cube update rules from sheduled lines DS. Using code, refer to the respective item in the order item ODS. You would have to make sure that DS's data are correctly activated before updating the infocube.
What solutions to choose?
2.1 is better in terms of flexibility and architecture...because you could re-arrange the new DS to answer future needs, without loosing the 1st line DS's data;
2.2 choose if data volumes and disk space are a concern...
or
2.3 it's OK, but i do not like it because of what explained in point 1...
Message was edited by:
Miguel Costa

Need to modify Sales order Item additional tab B

Hello all,
I need to modify Sales order item additional tab B ...by removing the exisitng fields and should add some new fields ....does it have any impact on this screen could be used in any of the other transaction .......i just wanted if we remove the fields and some new details will have some impact
Regards,
KK

Additional data B is used to add your own fields also known as custom fields in sales order.
Custom fields can be added to tables VBAK & VBAP (depending on header or item). Similarly you can remove fields if you don't require it anymore.
In short, your requirement can be met but you have to take help of ABAP consultant since it requires maintenance of user exits and modification of screens.

Unable to change requested delivery date in the sales order at item level.

The issue is when I create order with one material (linked to network and project is created automatically in the background), I am able to change (in change mode) req delivery date for an item, but when I create order with 2 materials (linked to network and project is created automatically in the background), I can not change (in change mode) the req delivery date of any item. Req delivery date is then copied from the header req delivery date.
Is this a standard SAP functionality or a defect?

Req del date is the date requested by customer and can be changed at item level. Probably the confirmed date in the schedule line is derived from the network scheduling after ATP check. (ATP check is not activated in this case)
I am able to change the req del date at item level if there is only one item (Linked to network) and not when there are two line items (Both are linked to 2 diff networks belonging to same project)
I tried to change the date in the network, scheduled and saved but that didnt change the date in the sales order. On the contrary, if I run ATP check, netowrk dates get back to original dates derived from sales order.

Find Sales Order Item Basic Data by Elements query fails

I am trying to consume Find Sales Order Item Basic Data by Elements in .NET 3.0.
Every thing appears to be working fine -- I could query by PO number, Creation time, SalesOrganisationID etc.
However, the most basic query is mysteriously failing. I just want to query by Sales order number, and have given a valid sales order number 6718 that exists in SAP.
It fails giving the following errors:
(in Log.LogItem.Note variable):
"Conversion failed: Invalid input format"
(in Log.LogItem.TypeID variable):
"701(SFB)"
Code is pretty simple, and I am just trying to query Saler Order number 6718. Of course there is nothing wrong with its format.
From the ESOA site, all I could get was:
----
QUOTE -
The following values are optional selection criteria for restricting the search result:
SelectionByID Document number range
INCLUSION_EXCLUSION_CODE
INTERVAL_BOUNDARY_TYPE_CODE
LOWER_BOUNDARY_ID
Value
UPPER_BOUNDARY_ID Value
Value
UNQUOTE -

I could not even have any documentation on what to put in InclusionExclusionCode, and IntervalBoundaryTypeCode. They apper to be some Global Data Types for which I couldn't find any documentation. By sifting through Wiki, I just guessed a couple of values praying that it may work. I am a bit new to ESOA, but have expertise in .NET 3.0. Would someone guide me where to find the documentation for that, where are the error codes listed, so that I make the queries with little better preparation.
 querydata.SelectionByID = new SalesOrderERPItemBasicDataByElementsQueryMessage_syncSalesOrderERPItemBasicDataSelectionByElementsSelectionByID[1];//Single element array is good enough
 querydata.SelectionByID[0] = new SalesOrderERPItemBasicDataByElementsQueryMessage_syncSalesOrderERPItemBasicDataSelectionByElementsSelectionByID();
 querydata.SelectionByID[0].InclusionExclusionCode = "E";
 querydata.SelectionByID[0].IntervalBoundaryTypeCode = "6";
 querydata.SelectionByID[0].LowerBoundaryID = new SalesOrderID();
 querydata.SelectionByID[0].LowerBoundaryID.Value = "6718";
 querydata.SelectionByID[0].UpperBoundaryID = new SalesOrderID();
 querydata.SelectionByID[0].UpperBoundaryID.Value = "6718";

How do you test with a SOAP Client - I am trying to use same dataset as provided?
I did with WSDL Test - SAP, SOAP Client and got the following error:
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
 <soap-env:Body>
 <nr1:SalesOrderERPBasicDataByElementsResponse_sync xmlns:nr1="http://sap.com/xi/APPL/Global2">
 <Log>
 <MaximumLogItemSeverityCode>1</MaximumLogItemSeverityCode>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 <Item>
 <TypeID>701(SFB)</TypeID>
 <SeverityCode>1</SeverityCode>
 <Note>Conversion failed: Invalid input format</Note>
 </Item>
 </Log>
 </nr1:SalesOrderERPBasicDataByElementsResponse_sync>
 </soap-env:Body>
</soap-env:Envelope>
Thanks..
Vikas

Sales Order Item Data & Sales Order Schedule Lines

Hello,
I have a Sales Orders cube which is pulling data from two DSOs (one for sales order item data and the other for sales order schedule data). The common fields between these two DSOs is the Sales Order number but in my cube I have dual entries for each Sales Order document (item and schedule info).
Example of how the data looks now:
Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . 01/02/2000
How do I merge the data on the Sales Order number in the cube so it looks like below?
Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10 . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15 . . . . . . . . . .2 . . . . . . . . 01/02/2000
Many thanks,
Matt

Hi Matt,
 Its no possible If you are maintaining data at Order Level.
Try to introduce one more ODS/DSO in between ODS's and CUBE by keeping Sales Order only key field. Load data from both DSO's in required fields only. Then PUSH delta to CUBE. In this why you can maintain 1 record. Try to compress cube(with delete Zero Record Rows) to delete unnessasary records.
Hope it Helps
Srini

How to do INIT for Sales order Itema Data (DS 2LIS_11_VAITM)

Hi all
I have a report on sales order item data, I have to reload it. DS 2LIS_11_VAITM
Can any of you pls explain me the steps to do the INIT? Refill set up tables etc
Many Thanks in advance
Ishi

Hi Hari
Many Thanks for the explanation and steps. I deleted set up tables and executed to fill it.
It says in R/3 Start of Processing, I ticked to continue and its still running.
In the mean time I checked RSA3 and it says 1007 records selected. I am refreshing it and the no. of records are still the same.
Can you tell me how long it takes to fill the table?
And the R/3 system is still running (Start of Processing)
Thanks again
Ishi

Modify Sales order Item additional tab B

I need to modify Sales order item additional tab B ...by removing the exisitng fields and should add some new fields ....which is ok. But does it have any impact becoz the same screen fields coulbe used in any of the other transaction .......i just wanted to know if we remove the fields from sale orde item additional tab B and some new details will have some impact

Hi,
Before making any modifications check "Where-used". If it is in some other program other than the VA01/02/03, then better consult your lead before modifying.
If you do not find, go ahead and make the changes confidently.
Regards,
Subramanian

Change End date of billing plan/invoice plan in sales order item(fpla-erdat

Hi Experts,
Could you please help to me regarding this issue.
I need to change End date of billing plan/invoice plan in sales order item of "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
Thanks
jaya

Hi ramki,
I tried with using MASS T.code ( bus2032 Object type).
There are no field related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
now what i can do. or explain
Thanks
jaya

Change End date of billing plan/invoice plan in sales order item

Hi Experts,
Tell me what are tables to be updated,when i changed end date of billing plan/invoice plan ( "billing plan" Tab in sales order item).?
Thanks
jaya

vbrk and vbrp

Additional Data A in Sales order Item....

Similar Messages

Maybe you are looking for