Additional Data ta fields

Hello Gurus,
I am working on version ECC 6.0. The Additional data tab on the header level of the PO does not contain any fields. The fields are missing on this tab eg. Validity start date, end date , warranty etc. I require these fields on my PO as it is in the earlier versions. Any help will be greatly appreciated.
Thanks in advance
MV

Hi,
please check the field selection for PO in SPRO make it optional for additional data
SPROMaterial Management Purchasingdefine screen layoutat document level
Select ME21N and click on details you will get all the field selection group then double click on administrative data, header here you can make the required field as optional/required or display
regards
Vikrama

Similar Messages

  • Adding new fields to additional data B screen in sales transaction

    Hi All,
    I have a requirement like this I need to add 3 input fields and 1 push button(select oppurtunity) in additional data B screen of sales order transaction.If I click on this button I want geneate one pop up dialog box just like as search help box and I should be able to search data for these 3 fields data based on some 4 input fields data?How can I acheive this?I can add button and what I have to write the code in PBO and PAI of this screen?Please some body help me in this regard.
    Regards
    Mahesh

    Hi friend,
    In SAP we can add few fields from maintain reserve fields. Please go through it;
    Maintain Reserve Fields In Customer Master
    There are reserve fields in the customer master record which are not used in the standard system. They are available for use and are as follows:
    Customer group 1 (View: V_TVV1 Field:KVGR1)
    Customer group 2 (View: V_TVV2 Field:KVGR2)
    Customer group 3 (View: V_TVV3 Field:KVGR3)
    Customer group 4 (View: V_TVV4 Field:KVGR4)
    Customer group 5 (View: V_TVV5 Field:KVGR5)
    You can find the fields in the customer master record under the sales and distribution data in Sales. Choose additional data under Environment.
    It is advisable to change the field description (Data elements KVGR1 to KVGR5).
    This is described in the system modifications in the Reserve fields unit of the customer master record:
    Reserve Fields in Customer Master
    Record
    In this step you maintain the valid entries for the individual views.

  • Mandatory field in sales order additional data tab

    Hi,
    I have added an extra field in additional data tab of sales order. 
    How can i make this field as mandatory for certain sales organisations ?
    TIA

    since it's conditional, I think I would add code in SAVE_DOCUMENT_PREPARE subroutine in MV45AFZZ, based on transaction code, prior values (YVBAP) and current values (XVBAP), and issue an error message, allowing user to return to the screens displaying Item table control, when the field is not properly populated.

  • Addition of new field in VA02 and VA01 in additional data tab B

    Hi,
    I have added a new field called delivery date to additional data tab B in both tcodes va01 and va02. Now, while creating or changing a sales order, if the Sales group is I00 then this field should be filled up mandatorily. For va01 and va02 i have done all the required coding where all this is done on pressing the save button when we are in the additional data b tab.It would throw an error message if the date is wrong and a wrning if it is empty (provided sales group is I00). I did the coding in 4462 screen.
    My requirement now is that if somebody doesnt go to the 'additional data b' tab n try to save the Sales order then also it should throw a warning or error stating that delivery date field should be filled up. Where exactly should i place the coding now? if it is screen 4900 then can someone suggest me at what place should the coding be done.
    Regards,
    Puja

    Hi Puja,
    Seems you have added the fields at item level in sales order and for this you must have appended the additional fields
    in vbap table. So to validate these fields you can use USEREXIT_CHECK_VBAP available in MV45AFZB user exit include.
    The fields you appended will be available in vbap structure, add your validation here or even in USEREXIT_SAVE_DOCUMENT_PREPARE  available in MV45AFZZ which is called before saving the sales order.
    Regards,
    Pawan

  • Custom field in VA01 at item level in Additional Data B Tab

    Hi ,
    I have a requirement to add a custom field at item level in Additional Data B tab of VA01/VA02. We have to store the data in that field in the VBAP table also have to validate the data entered in the field when user hit save.
    Can any body tell me step by step procedure to do that.
    Appreciate your response.
    Thanks,
    Rohit

    Add append structure  ZAVBAP  in table VBAP in Tcode: SE11.
    In this structure include the new fields to be added to the screen.
    Then in Tcode : SE80
    take program: SAPMV45A
    take screen 8459  and add the new field.
    Also add the validation in the flow logic.

  • How to add Fields in Additional Data B in VA01/VA02.PLease help me out.

    HI All,
    My requirement to add a Custom Screen in Va01/VA02 .Kindly suggest if any screen exists are there.
    How to Add extra fields in Additional Data B in header of VA01/VA02.is access key is neccessary for that.
    Thanks in  Advance.

    Hi
    Check the link
    http://techbays.com/2008/04/17/implicit-enhancement-in-sap-ecc-60/
    There is a BADI BADI_SD_V46H0001 and Method EXIT_SAPLV46H_003.
    You should be able to it without access keys.Consult your SD Functional Guy also
    Regards
    Sanil Bhandari

  • Adding Field in Additional Data B in VA02-Please help me out this

    Kindly help me out , I have a requirement to add a custom field at Header level in Additional Data B tab of VA01/VA02.
    Program: SAPMV45A
    screen 8459
    Can any body tell me procedure to do that.
    Appreciate your response.Thanks in advance

    Hi
    Check the link
    http://techbays.com/2008/04/17/implicit-enhancement-in-sap-ecc-60/
    There is a BADI BADI_SD_V46H0001 and Method EXIT_SAPLV46H_003.
    You should be able to it without access keys.Consult your SD Functional Guy also
    Regards
    Sanil Bhandari

  • Custom field at Header level in Additional Data B tab of VA01/VA02

    Kindly help me out , I have a requirement to add a custom field at Header level in Additional Data B tab of VA01/VA02.
    Program: SAPMV45A
    screen 8459
    This can be done only through access key or not. Can any body tell me procedure to do that.
    Appreciate your response.Thanks in advance

    Please help me out this

  • Add new fields to additional data tab in customs declaration

    Hello friends,
    My requirement is to add Z fields in the additional data tab in transaction /SAPSLL/CL_CUS_02 of GTS. I would also like to know If its possible to create a new tab all together in /SAPSLL/CL_CUS_02 where in we can add fields from a custom table.
    Thanks a lot in advance. Your help will be highly appreciated.
    Regards,
    Koustubh

    Hi Koustubh,
    As Dave pointed out, there is a BadI for extra tab on declaration Item and Header.
    There is an example implementation already available in the System. I believe that 1 BadI will no be enough for what you need.
    UI enhancement BadI uses standard CUHD and CUIT tables to store the extended data ( via table APPEND ), in order to save content to Z* table you will need a separate BaDI.
    Also, If you intend to use this extra data in outbound message / declaration Idoc, extra BadI has to be used and also the basic IDoc type will need to be extended with your Z* segment. Thats probably 2-3 BadIs working in tandem.
    Can you tell what is the purpose of the extra data / extra tab ?
    Best Regards,
    Branislav Petricek

  • Grouping field value in the additional data tab is saved with capital lette

    Hi,
    Whenever I change the value in the 'Grouping field' in the additional data tab, it gets saved with all letter caps.
    For e.g, if i enter 'Manager'.. it gets saved as 'MANAGER'.
    what could be the reason for this? Is there any configuration for this?
    Regards,
    Simmi

    Hi Simmi,
    For Grouping and Search Field, this seems to be the standard system behaviour in cProjects and as per my knowledge there are no settings for the same.
    Probably you can raise an OSS message regarding the same.
    Regards,
    Vivek Pandey

  • Long text for a field in Additional Data tab of DMS

    i have a field in additional data tab called Name , how can a long text be assigned to that field

    Hello Mr. Vijay,
    Classification Configuration master data which we need in Additional Data tab. Presently In our SAP system we have limitation for just 30 character for each characteristic if i correct just confirm me please
    Regards
    Arun kaul

  • Additional data in Customer master  to be mandatory field

    Hi SAP Gurus,
      I've a requiremnt of setting the additional data fields as mandatory in Customer master "Sales area" data.
    I have checked in the standard config were there is no settings related to additional data  in the Std configuration
    (account group)
    Finaly, I found an include program - LV02ZOKV for this requirement to do the changes through ABAP programe.
    (to activate  field us  Mandatory)
    May I know is this the correct approach for this requirement or in case if you have better requirement could 
    you please share with me to avoid the unnecessary impacts.
    Thanks in Advance.
    Thanks & Regards
    Pugal

    Hi Thomas,
        Thank you!!
    I have recently got a programe - SAPLV02Z, I think this will help me out..
    Thanks & Regards,
    Pugal

  • Adding custom fields to VA01 additional data tab without access key

    I have to add custom fields at item level in transaction VA01/VA02.
    Is  access key required to add fields to additional data screen i.e 8459 ?
    Is there any way to do this without using access key ?

    Hi ,
    Try for any User Exit or BADI available for the tcodes.
    Here are exits for VA01 and VA02.
    Exit Name           Description
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    Regards,
    Lakshman.

  • Screen Exit for adding custom fields in Additional Data tab in ME21N

    I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
    I also need a similar exit for adding a filed at item level.
    Thanks in advance
    Martin

    Hello,
    1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
    please check it for VA02
    SPRO u2013 SAP Reference IMG ---  Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
    1)Screen group                                  description
            zs                                           creating badi      --- (save)
           click on (label tab pages) u2013 new entries
           number u2013 10 , function code u2013 zs10 ,  description u2013 func ---(save) u2013(back)
    2)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS
         (desc u2013 impl for cust) u2013 (save)
        interfaceu2014(check_add_on_active) double click on it
    3)the above screen appear --  write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
         -- (activate) u2013 (back)
       Business adds in customer sub screens
    4)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS1
         (description -- cust) u2013 in attribute u2013 (give screen group name)
    5)go to interfaces (GET_TAXI_SCREEN)  double click on it
       (save)  --- (activate) 
    6)(SAVE)  -- 
        Goto SE38  -- CREATE PROGRAM WITH NAME (ZQW) type module pool
         Goto SE51  -- Prog : ZQW
           Screen : 200 (Create)
          Goto layout u2013 design the screen
    7)save u2013 activate
       then goto transaction : va02
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    u can check the table MODACT
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u ,
    santhosh

  • Calendar in F4 help of additional data field

    Hi Experts,
    my query is regarding calendar to appear as an f4 help for the additional data field in DIR. is any function module need to be specified at the time of creating characteristics (if yes please guide)?
    thanks and regards,
    Shikha Gupta.

    hi,
    Logic is like this.
    Here u are defining perticular character to DIR  which belongs to your document type.
    when u assign this value to DIR which is help full in search DIR in CV04N.
    Note: i don't think u need calander in defining Characteristics. u could check format, for Data type only DATE is given insted of calander in CT04.
    If u want include Calander in Data type, then u ask abaper[development].
    i think this is very tedious job.
    Benakaraj
    ??P

Maybe you are looking for