Additional excise pass on for Past depot sales

Dear Gurus,
We need to pass on the additional excise duty captured at depots using J1IGA to the sales which was made in the past.
Normally, we pass on the excise using J1IJ for the corresponding Depot delivery. But in this scenario, the Delivery document already has been taken reference for excise pass on. I request you to provide a solution to pass on the additional excise duty to the past sales and the same should be reflected in RG23D register as the additional excise duty input entry is also shown in RG23D.
Thanks in advance,
BVS.

Thanks Riaz for your reply. I don't think table entry is the feasible approach. We may create a supple invoice to the customer. Passing on the ED and hit the RG23D register is the question. I think we can create the entry in J1IGA it-self for the corresponding internal document/folio number combination. But the problem in J1IGA is, once the Qty for the folio number gets completed, system is not allowing to create entry against that folio number. Is there any note or customization setting to enable the J1IGA additional excise entry even the qty for the folio number is totally sold from the depot???
Awaiting for the replies from the SD-CIN gurus.
Regards,
Kotesh.

Similar Messages

Cancel excise invoices created for a Depot

Hi
How to cancel excise invoices created for a Depot ?
regards
N Banu

yes, that is the reason SAP has provided only one option to enter only one billing document no when creating excise invoice through J1iin.
Regards,
Sudhir

Utilization of Additional Excise duty using J1IJ at Depots

Dear SAP Gurus,
Our manufacturing Plant has created a supplementary invoice for the differential excise rates to the Depots and the same had been captured at depots against the original plant excise internal document numbers using the transaction J1IGA. This additional duty should be passed on to the customer. So we attempted to pass it on to the customer using J1IJ. We could able to pass the same for the 1st sales. But for the next consecutive sales, system is not listing the additional excise list where as it is showing the list for the 1st immediate sales after capturing the additional excise using J1IGA.
My questions are:
1. Is there any other way than using J1IGA to capture the Additional excise value raised by the Manufacuturing plant using A certificate at Depots?
2. How to pass on the addtional excise to the customers from Depots? If J1IJ is the only way,Then, it is not listing the additional excise details from the second sales onwards.
I would be thankful for your replies.
Thanks in Advance,
Kotesh.

Hi,
Config required to get this field from MM/FI area.Also there is one Snote related this.Pls check.
Regards

Stock Transfer Process for CIN Depot Sales

Hi,
Could u pls explain me how to carry out the stock transfer process . I am using CIn version and pricing procedure will be that of Depot Sales.
Thanx and Regards,
Binayak

Hi,
In Addition to the above Reply,
Stock transfer invoice:-
Stock transfer PO-->ME27
DELIVERY-->VL04
PICKING PACKING GOODS ISSUE -->VL02N
BILLING-->VF01
EXCISE INVOICE --> J1IIN
GOODS RECEIPT-->MIGO
INCOMING EXCISE INVOICE--> J1IG
Cheers..
Santosh.
P.S. Mark All usefull Answers...

Business Area for Depot Sales

One of our clients who has implemented SAP thru us 3 months back has now acquired a depot for trading in excisable goods. He has acquired a dealers registration for the depot and will be shortly starting his trading activity from the depot.
I have been asked to do the necessary config for that depot. What config is required to be done from the FI-CO angle.
Full points shall be assigned

Hi Nikhilesh
Initially as you said that you have acquired a seperate Registration for Traded Goods you need to suggest the MM Consultant to Configure a seperate PLANT marked as Depot. Once it is marked as depot regular excise activities as ment for manufacturing goods cannot be executed here.
In the process all the activities pertaing to Traded Goods should trigger the Register RG23D and not RG23A/C.
Detailed analysis will be given later,
Hope you will be able to sort out the issue based on the above information
Also need to create a seperate Business Area for Traded/Depot Sales.
regards
Murali Kanth Natti

Excise invoice creation for Debit Memo or Credit Memo

Dear All,
I have to create Excise Invoice J1IIN with reference to Debit Memo in Differential Invoice Senario.
When i goto J1IIN it shows Customization for Document is missing in table Billing Reference type.
How to create Excise invoice for Order related billing.Plz solve my problem.
Award Pts for useful answers.
Thx & Regards,
Pankaj

CIN Configuration for Excise Invoices in case of RETURNs
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure ofData ScreenMaterial Master Configuring the Material master Screen Sequence.for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps

Utilization - Additional Excise in Depot Sales

Hi SD Gurus
Could u plz throw some light on, how the Additional Excise Duty is settled from Manufacturing Plant, in Depot Sales Process.
Please be specific in your response as I have already completed the whole process till J1IJ and RG23D updation.
Also clarify that if the goods are sold at less price, from Depot, what will be the procedure to handle the corresponding effect
Eagerly waiting for the Expert's comment on this.
Best Regards
K. Sachin
Edited by: K.sachin on Sep 8, 2008 12:27 PM

hi Antima
Thanx for the reply.
U used J1IS for Plant for the difference amount.before Depot sale to take place. fine.
If I use J1IS , after Depot sale is complete, then also it is ok.
But my question is this the only solution because my client is using very different process to accomplish this, which is some sort of adjustment for simplifying the end user task.
Again what about other question, that if material is sold at less price , then what will be the implications. Do you have some idea about it.
Thanx again
K. Sachin

Excise invoice for depot sale

Friends,
While creating excise invoice using J1IJ for depot sale we are getting error as "you are not authorised to create".
Ple guide.
Edited by: shiv on Jan 9, 2009 10:42 AM

Dear Shiv
Do the following once you see the message at the bottom.
In white top box, input /nsu53.
Now from top menu bar, click on System -- List -- Send. Sometimes, this Send tab will be in grey mode. In that case, at left corner, you can see a tab "Text View". Click that. Again click from top "System -- List -- Send and send a mail to your basis team.
thanks
G. Lakshmipathi

Price for excise invoice in depot sale

Hi Friends
Actually i am doing stock transfer order from manufaturing plant to depot plant. we know that generally pricing wont be applied in stock transport order, so from where pricing triggers in the billing & excise invoice in depot sale.
Please advice and reply as soon as possible.
Thanks in advance.

Dear,
in pricing procedure determination select sales area through which u r doing STO, Document pricing prosedure as I and customer pricing procedure as 1 assign your pricing procedure ande pricing condition.
Make sure that In VOFA for Billing type IV document pricing procedure should be I.
create conditon record.
At the time of Billing for STO choose billing type as IV system will aumatically copy all the value in billing.
Hope it will solve your problem
thanks,
Rahul

Pricing procedure for Depot Sales(CIN Version)

HI,
Can anyone explain me TAXINJ and
The Pricing procedure for Depot Sales(CIN Version)
alongwith the Condition Types like JMOD,JECS,JECX etc.
Points will be given
Regrds,
Binayak

Hi Binayak.
JMOD is a FI Tax condition which gets the Basic Excise duty from calculation formula 352. JEX2 is a copy of JMOD and is a Sales pricing condition. The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly. In cases where commercial invoice is created after utilization the condition value formula 353 ensures that the actual MODVAT utilized is accounted as excise.
Similarly JAED is a FI Tax condition which gets the Additional Excise duty from calculation formula 352. JEXA is a copy of JAED and is a Sales pricing condition. The accounting is done for the value of JEXA.
JSED is a FI Tax condition which gets the Special Excise duty from calculation formula 352. JEXS is a copy of JSED and is a Sales pricing condition. The accounting is done for the value of JEXS.
JCES is a FI Tax condition which gets the CESS from calculation formula 352. JCED is a copy of JCES and is a Sales pricing condition. The accounting is done for the value of JCED.
So, Conclusion :---->
JMOD -- > Basic Excise duty condition for FI side.
corresponding to it,
JEX2 is the Basic Excise duty condition for SD side.
That's why
account key to JMOD is linkes in TAXINJ.
and
account key to JEX2 is linkes in JDEPOT.
Hope this certainly helps you.
Please reward points if found useful to you.
Let me know if you have any other doubt.
Regards,
Gaurav Raghav.

Depot Sales Excise

Dear All,
I am doing sales from depot. In Depot Sales order I have 10 line item. I create Delivery for 10 line item but i want to pass excise on first 4 line item only.But when i am creating excise invoice in J1IJ system showing error that excise selection for 6 line item is pending.In Short system ask me to load exicse on each line item.
what is the way out for this solution.
I am on implementation and my go live is after 15 days.So immediate reply will be appriciated
Regards
SD Consultant

Not Possible.
In fact, Not logical.
You cant do Partial PGI ( You cant do PGI for 4 line items from the delivery which has 10 line items in it, until unless you delete the remaining 6 line items)
similarly, you cant capture excise for 4 line items of the delivery which has 10 line items.
First, I would like to know, what makes you to do this? What is your actual requirement.
When you are issuing goods for 10 items, why you want to capture excise only for 4 line items.
Could be helpful to suggest any inputs.

Depot sales excise to billing problem

Hi,
We was into the depot sales project.We have done till excise duty.
That means,first we are created a sales order and then outbound delivery for that.So based on the outbound delivery number normally we do billing.
But here after outbound delivery we are in to assigning excise duty tothe delivery.In j1ij we have given and done all the things its working fine by FIFO method.It will first show the first procurement.We will select and this process got over.RG23D table is filled up with the values.
But after this i gone for doing billing in VF01.But when i give the delivery number,it shows the condition typea and values but it didnt show any thing about excise duty which we are giving,So can anyone plz help me in this issue.
Whether any configuration we want to do,or any thing we want to do internally.
Routine 356, which transfer this from j1ij to billing is not happening, Since it is direct procurement of traded items , excise duties need to be passed on to customer directly, Here I hope there is no point of calcualting the excise duty, Since the excise duty would have inventorised.
UTXJ condition record are maintained.

Hi Mahesh,
First check the J1ID and check the pricing procedure and condition records.To reduce the master data we will use UTXJ condition.
Regards
RV

Depot Sales -J1IJ while choosing excise invoice going to dump

Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference.
we are facing issue in J1IJ, when we click on the Choose button (first button below select Excise invoice for delivery statement), we need to get the Excise Invoice number reference which is captured at Plant. When we tried to click on that Choose button, we are not getting any excise invoice numbers and instead itu2019s going to dump .
Dump analysis says:
Runtime Errors         SYNTAX_ERROR
Date and Time          14.09.2009 16:43:01
     Short text
          Syntax error in program "SAPMJ1IK ".
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
          The following syntax error occurred in program "SAPMJ1IK " in include "MJ1IKF01
           " in
          line 38:
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
          The include has been created and last changed by:
          Created by: "SAP "
          Last changed by: "SAP "
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          The following syntax error was found in the program SAPMJ1IK :
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
     Trigger Location of Runtime Error
         Program     ????????????????????????????????????????
Could any body help me out to come out of this issue.
Thanks&Regards
Sreekanth

Hi Sreekanth,
If this is first time you are doing look for OSS notes, Please escalate this issue to your basic and apap consultants.
R u following the following flow in case of stock transfer from mfg plant to depot plant.
PlantA:
ME21N
VL10B
VL02N
VF01
J1IIN
Plant B:
MIGO - (Goods Reciept & Excise Capture)
VA01
VL01N
J1IJ
VF01
Here at goods reciept you need to capture excise inviove same will populate when you make a sales from plant B using J1IJ transaction.
Thanks,
Swamy H P

For depot sales entries

Hi all,
now i am testing in depot sales process, in that when i created excise invoices for delivary at depot, the invoice update the RG 23D and one invoice generated.
where we see this generated invoice and is there any fi posting is there??
now i am using 4.6C, with cin 4.0.
if possible kindly give the total gl entries for the whol process.
Raghav

Hi all,
now i am testing in depot sales process, in that when i created excise invoices for delivary at depot, the invoice update the RG 23D and one invoice generated.
where we see this generated invoice and is there any fi posting is there??
now i am using 4.6C, with cin 4.0.
if possible kindly give the total gl entries for the whol process.
Raghav

Depot Sales - Goods issue not done for the delivery

Hello Experts,
I am trying to capture a Excise Invoice in the Depot Sales Process TCode - J1IJ.
I am getting the follwoing message - GI not done for the Delivery.
Process which we are following here is
Depot
SO - Delivery - Picking - Packing - J1IJ - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end (Will create invoice & Excise Invoice).
Excise invoice is captured during MIGO at Depot.
Can you please suggest..
Thanks & regards
Mahesh

Hi mahesh
Change the process to following manner
Depot
SO - Delivery - Picking - Packing - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end -J1IJ(Will create invoice & Excise Invoice).
u r problem will be solved.
Regards
kedasu.a

Additional excise pass on for Past depot sales

Similar Messages

Maybe you are looking for