Additional extrinsics in the PunchOutSetupRequest

Hello,
First off I'm new to Oracle. Here is my question: We are using iProcurement 11, and we are trying to get a punchout catalog work for a supplier that requires some additional extrinsics to be passed in the PunchOutSetupRequest cXML document such as:
*<Extrinsic name="CustomFilterQuery">myValueHere</Extrinsic>*
I'm trying to figure out where I can configure these extra settings but I have no clue where they are. When setting up a new punchout catalog in the setup screen I select "Supplier" as Source, then "Direct Punchout (cXML)" as method, and then I enter all the required parameters according to the supplier's specifications, but then he told us that needs 4 additional Extrinsics.
Does anyone have experience with this? Could you please tell me where I can set these Extrinsics up in iProcurement?
Thanks in advance.

Hi Pradeep,
Thanks a lot for your help. Do you know if there are also documents for additional Extrinsics in the PunchOutOrderMessage? The supplier also explained that he's going to sent back to Oracle some additional Extrinsics with the Shopping Cart content, and I'd like to know how I can do the mapping in order to catch those Extrinsics.
Thanks so much.

Similar Messages

  • Hi Guys,  I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

    Hi Guys,
    I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
    Alex

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • How to get additional field from the second list base on lookup information column ?

    Hi everyone,
    Currently I created a SharePoint hosted Apps project and I need to know how can I get additional field from the second list base on lookup information column. example List1 Have 2 columns column1 and column2(Lookup Information from list2 (category)),
    List2 have 3 columns title, and category, and color.  so how can get the title and color from list2 base on this lookup information column (SharePoint Hosted apps and Javascript code)? that is possible?
    Best regards,
    ------------------------------------------------------------ ---Tola---

    You can build one custom lookup control. Refer to the following post
    http://www.stuartroberts.net/index.php/2012/10/03/enhanced-lookup-field-part-1/
    Alternatively, try the following solution from codeplex
    http://sp2010filteredlookup.codeplex.com/
    http://filteredlookup.codeplex.com/
    --Cheers

  • How to  show additional items in the same window using stacked canvas

    How to show additional items in the same window using stacked canvas.
    My content canvas has 14 items, and I have to include more.
    I want to know how I can use a stacked canvas to show these additional items in the same window, so that I can scroll through horzontally , as if all the items are on one canvas.

    Well, I intially navigate into my content canvas. At this stage the stacked canvas is not visible, then how should I navigate to an item on the stacked canvas to make it visible?

  • Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over.  Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

    Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over.  Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

    mpr130 wrote:
    Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?
    How did you attemp to transfer Office?
    OS X Lion: Set up a guest account

  • Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!

    Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!  Any one have any suggestions not being offerd by tech support or Apple?  Anything at all?

    mdjb wrote:
    I just lost a big opportunity to get a new client because of this!!   almost 24 hours now without any email service. I was one of the original.mac customers.  I am over this time to move on. It is an inferior product.
    My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
    APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
    And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

  • How can I save the settings of my iPhone 4 before resetting the phone in addition to saving the apps etc. by synchronisation with i-tunes

    How can I save the settings of my iPhone 4 before resetting the phone in addition to saving the apps etc. by synchronisation with i-tunes

    All the phone settings are save in the backup which is automatically created when you sync the phone.
    http://support.apple.com/kb/HT1766
    Please clarify what you mean by "resetting" the phone. When you reset the phone, no data is deleted.  Do you actually mean Restore the phone?  See the User Guide, Appendix B for the correct terminology,
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded.

    When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded. I tried everything from reseting Firefox ,completely new installation of firefox to about.config and nothing worked it's been two days now since the problem started and i am pretty frustrated and desperate as i try to fix the issue so please help me with some solutions????
    Big thanks in advance

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Preferences_not_saved

  • Additional field in the 'Add document' subscreen while creating a Solar doc

    Hi Forum members,
    I need to add additional fields in the 'Add Document' sub-screen that appears when I create documents in SOLAR01.
    The subscreen currently has 'Title', 'Documentation Type', 'Status' and 5 radio buttons for 'Object type'.
    Please advise.

    Hi,
    I doubt if we have any option to add additional fields in that screen.
    What additional fields are you planning to add?

  • Additional field in the sales order header Purchase Order Data tab

    Hi,
    I want to add an additional field in the below screen:
    VAO1 > Go to > Header > Purchase Order Data >
    Under Sold to party section i want to add an additional field.
    Is this possible through configuration?
    Please let me know.
    Thanks in advance
    Edited by: Kase on Dec 20, 2011 7:06 AM

    Hi Kase,
    Check this below link it might be helpful for your issue
    sales order - Additional data B
    new fields in sales order
    Regards
    Pradeep

  • Additional field in the sales order screen

    I need some additional field in the sales order screen. There is
      also no screen exit available for VA01. Can I use this
      additional data B tab in header details by creating additional
      field in it. Please tell me how to use this tab or how to get
      different field in the sales order (header or item level).

    Hi,
       Yes. You can use this screen. For this either can modify the table VBAP with additional fields and put them on this screen.
      You have to code your logic to save these values in the include MV45AFZZ. The subscreens you have to use for this are 4462 or 8459.
    refer Screen exits - Urgent.
    with regards,
    Vamsi

  • How can I attach an additional action to the "reset" button in the drag and drop interaction?

    Hello,
    I would like to know how to attach an additional behavior to the "reset" button in my drag and drop exercise.
    Here is the background:
    In my drag and drop exercise, when the user drops the source on a target of his choice, certain elements appear and certain elements disappear
    This means that depending on where he dropped the sources, certain elements will be visible and certain elements invisible when he is finished the activity
    Because the sources are not re-draggable once he drops them, he will have the option to reset the exercise and start again from the beginning using the reset button
    My challenge:
    I would like exercise to return to its original state when the user selects the rest button .  this means:
    the dragged objects return to their orginal starting location (this is what naturally occurs when you hit the reset button)
    any objects that had disappeared during the course of the activity reappear
    objects that were not visible in the beginning , but had appeared during the course of the activity, again become invisible
    So how can I add this action to the reset button?

    Allowing the user to redrag the souce after it has been dropped would work for my particular problem  if I could bind an action to the event redragging, namely making the elements reappear that had disappeared and the elements disappear that had appeared when the user dropped it the first time.

  • I've Downloaded twice ''Additional Contents'' but the issue is still unresolved  ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)

    I've Downloaded twice ''Additional Contents'' but the issue is still unresolved  ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)
    Please Help

    "Additional Contents" I don't even know what that is? What app is it for?

  • How to display additional fields in the results a 'search user'?

    This may be a newb question but how can I display additional user attributes in the results of a user search in the admin console?
    i.e. more than just the standard fields of: User ID, First Name, Last Name, Status, Enable, Disable, Unlock and Delete.
    I would like to include some UDFs that I have defined for the create user form e.g. personnel number.
    Thanks,
    Bernie

    Thats not gonna work for sure. Thats to include additional attributes in the search input parameters drop-down. There is another procedure to do that, but not very sure if it works or not because once I was decompiling the code and found that it doesn't have an implementation. You can anyway try it out, the worst would be that you would not be able to see the column headings, but try atleast:
    And thats through the use of properties file. Open up ** and search for the following section-
    *#global.request.users.selectedListDisplayFields=*
    *#global.request.users.selectedListDisplayFields.lables=*
    Remove the comments and update it to below-
    global.request.users.selectedListDisplayFields=USR_UDF_EMPID
    global.request.users.selectedListDisplayFields.lables=global.xmlmetadata.users.USR_UDF_EMPID
    where USR_UDF_EMPID is the UDF and global.xmlmetadata.users.USR_UDF_EMPID is its associated translation.
    Thanks
    Sunny

  • Add WHERE criterias in addition to what the user enters on search page

    Hi,
    This may be a simple problem, but I have not been able to solve it.....Is there a way for me to code another search criteria in addition to what the user enters?
    I'm trying to create a simple search page. Basically, user logs on, i get his acoount number and save it in a variable. Then whatever the user's search criterias are , I want to add "AND ACCOUNT = ???."
    I've tried:
    In the processRequest, retrieve his account number using a VO, stored account number in variavle x and then call a initQuery(x) for the VO to get only the rows that he should be able to see. Problem A: I get 'SQLStmtException' when I test the page by trying to do a Simple Search. So to fix that, in the VOImpl, I added these two calls -- setWhereClauseParams(null); setWhereClause(null); -- after the executeQuery(). After I did this, ran into Problem B: the user could search any record that wasn't associated with his account.
    I also tried to dynamically create the vo using createViewObjectFromQueryStmt("Select * from table where account = " + x) but was not successful. The page didn't render and I received a ClassCastException similar to this thread -- Re: How to Create OAViewObject programatically
    I'm new to OAF and would appreciate any pointers on how to implement this.
    Thanks,
    LL

    Hi,
    I assume that you haven't tried the following steps..if you have and still get an error, give us the SQL statement error that is coming up. If I misunderstood your requirement, could you elaborate.
    I assume that when the user logs in you get the account number automatically.
    You could define the VO to have the following where condition 'WHERE ACCOUNT=:1'.
    Then you set the account id from the user using setWhereClauseParams(0,accountid) and call executeQuery. This would limit the result to that user.
    This will work in addition to any other search fields that might have been used in the query.
    For e.g with just the account id the sql that will be fired is
    Select attribute1, attribute2....from Tablexxx where account = :1
    Any other user search criteria given in the page will result in a ssql query like the following
    select * from (Select attribute1, attribute2 ...from Tablexx where accoount = :1) where newattribute like `%xx`
    Hope this helps. Let us know if you still have issues.
    Thank you,
    Arun

Maybe you are looking for