Additional Field Availability in MIGO Screen

Dear Sir,
In the MIGO screen , we want to see that is there any extra Field available which has not been made enabled/displayed .
Pl guide us as how can we see the availability of such fields pl .
Regards
B Mittal

Hi,
Follow the path:
SPRO->MM->Inventory Management and Physical Inventory->Setting for Enjoy Transactions-> Setting for Goods Movement (MIGO)-> Field Selection for MIGO
Here make document header text as u201CInput,enabled,displayed u201D entry as u required and save.
Regards,
Biju K

Similar Messages

Additional Fields in F-28 Screen

Dear Friends
Our client needs additional fields in F-28 screen to capture some business information like the cheque is from which bank and branch, town, challan number etc..... For this we need to go for Field exits. Can I know
1. Is it possible to add fields for F-28 screen for my requirement.
2. If Yes, how is it going to be done with minimal effort.
Request your help.
Brahma

Hi Brahmam,
Feild exit is put on a particular feild not to create additional feilds for a screen. For eg if you want a validation for assignment feild say you are capturing cheque # and you want it to be ony 6 digits then you can go for feild exit.
If you are using F-26 you can capture all the above feilds mentioned by you by way of IMG configuration. Let me know if you can use F-26 instead of F-28.
Regards
Santosh Hegde

E-recruiting: Additional field on cover letter screen

Hi!
I want to add a checkbox input field on the application screen in
e-recruiting above the cover letter. I found the actual BSP
(coverletter_v.bsp of HRRCF_REG_APPLN) and added the field.
I am not sure where the best place to put the new database checkbox field
but I am biased towards an append on table HRP5136 (Correspondence)
associated with the registration of an application(OTYPE = 'ND' and
ACT_TYPE= '1020', '1030' and '1035').
Could someone advise me what kind of objects and methods I
should/need to change in order to implement this completely and also why
don't external breakpoints take effect(I tried several places in the controller methods associated with a cover letter)? Is there a customizing that have to be set in order to get the effect of setting breakpoints?
In my case, as far as I understand there is no possibility to add an extra field in
a predefined user-exit, but rather one has to change SAP standard. Is
that right?
The reason why we need an additional field is that an
applicant may choose to appear as anonymous in the list of all
applicants and in that case (s)he needs to tick off the new checkbox
field. I did not find a suitable solution for this in SAP standard
e-recruiting system.
In advance, thanks for any guidance and help on this issue!

Hi,
As of now, the custom fields automatically being displayed on screen is available only with BSP.
The WDA screens are available for extrenal & internal candidates. You can craete your Z fields in cutomer include in the respective infotypes. The WDA developer will ahve to explicitly put the UI elements on the relevant screens & map them to these Z fields. We had a similar requirement & we have done this in this way.
Regards,
Sowmya

Adding additional field 1 to selection screen of CATSSHOW (CADO)

Hello all,
We recently added one of the additional field's to show up on the data entry section when using
transaction CAT2...This is working fine and the data is entered into CATSDB.
When using CADO, one can display the addtional field 1 and sort by this field.
However, the users now want this additional field1 to be one of the selections when they
use report CATSSHOW (CADO).
Is there some type of way to configure SAP to have one of these additional fields show up
as a selection field on program CATSSHOW (CADO)? My searches in this forum and the web
have not shown me a solution yet.
Or do I have to create a 'Z' version of CATSSHOW like ZCATSSHOW and do this myself?
Thank-you,
Rick Crawford

Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better .

How to add new additional field in my selection screen?

Hi,
In the BEx ,I have key and name in my report.While seeing the report, heading for customer number is coming and heading not coming for customer description.I need to have it in my report.
I.e
Customer     !     (This heading is missing)
   7     GABRIEL CHEMIE GMBH - AUSTRIA
   9     BERGER PAINTS BANGLADESH LTD.
Any tips? Points will be given.
Regards,Jaheer

Hi Jaheer ,
                 If you talking Abuot heading in out put screen then use TOP-OF-PAGE
or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
What I understand from your Question....
Souman

How to use OMJX transaction? Need to add an additional field on MIGO item

hi guys
we need to add a new field on the MIGO screen at the item level. We are trying to explore OMJX to add custom fields.
We have used append structutre to enhance the GOITEM structure but are not clear on how to use OMJX.
ANy idea how to use the transaction OMJX.
Thanks in advance

With the Business Add-In (BAdI) MB_MIGO_BADI, you can extend the
interface of the goods movements transaction (MIGO) with additional
tabstrip controls for the detailed information (detail tabstrips) and
header information (header tabstrips). It is possible for an external
application
o to display an additional detail tabstrip with own subscreen (max. 10
   lines) in MIGO
o to display an additional header tabstrip with own subscreen (max. 3
   lines) in MIGO
The program name, screen number and tab page text can be determined
dynamically. Different screens can therefore be controlled according to
the mode (for example, change mode, display mode, goods receipt, goods
issue).
Pushbuttons
It is not possible to implement pushbuttons in the MIGO menu, but you
can, however, implement pushbuttons directly on the external subscreen.
The OK code from MIGO is forwarded to the external application so it can
react.
Cursor Control
So that the cursor stays on the same subscreen after you press Continue,
if it was positioned there before, the external application in the own
PAI must hold the cursor positioning (on the same screen 'yes'/'no'; if
'yes', on which field), to set the cursor in PBO again.
Requirements
If you use the BAdI MB_MIGO_BADI in MIGO to update customer-own data, in
addition to the material document, to the database, you should note the
following:
o The BAdI MB_MIGO_BADI is only active in transaction MIGO.
o If you post goods movements with other transactions (for example, with
   MB01, MB1C, VL02N), you must ensure that customer data is also
   updated, if necessary.
   You can do this by using the BAdI MB_DOCUMENT_BADI (Creating a
   material document) to post the goods movements with the transactions
   mentioned above.
o Note that otherwise, posting the goods movements will lead to
   inconsistencies between SAP system data (for example, in stocks,
   material documents, FI documents) and customer data.

Additional field in selection screen of a abap query

Hi,
I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO.
The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting reflected in the code.Kindly advice me on what needs to be done to capture the selection screen value in the code.
Regards,
S.Subasree

Hi
You can add new field in VFX3 selection screen as follow. In the report code we can see various explicit enahcement points provided by SAP.One of them is ENHANCEMENT-POINT sdblbddl_01 SPOTS es_sdblbddl STATIC. Here you can declare your selection screen parameters. Then in the processing i can see a call customer fucntion happening in VBSK_DISPALY which you can implement to add your logic.
Thanks
Nabheet

Add a additional field in tcode XK02 - control screen

Hi,
I have to add an additional field in Tcode XK02 ie., in Control Screen, I couldn't find any screen exits. I hvae found one BADI VENDOR_ADD_DATA_CS .I have added a New field in Table LFA1 (the new field is T5UNT-NAICS ) through Append Structure but the append strcture is Partial Active. Also, how to add an additional field in the control screen of tcode XK02 using this BADI.
1. How to make theAppend structure Active
2. How to add a screen field using this BADI
Regards,
Deeephi.

1. My table was partial active...so go to se11,Enter LFA1 in display mode, Go to Path Utilities-database utility.now click on Activate and Adjust database.it will activated fully.
2.
a) create a module programme with the the screenfield(LFA1-NAICS) that you want.
b) In pbo of module pool,enter following code
data : l_zfield type lfa1-NAICS.
constants: c_zfield(10) value '(SAPMF02D)LFA1-NAICS'.
field-symbols: <fse>.
assign (c_zfield) to <fse>.
if sy-subrc = 0.
 l_zfield = <fse>.
endif.
If sy-tcode = 'XK02'.
 Loop at screen.
 If screen-group1 = 'Z1'.
 Screen-input = 0.
 Modify screen.
 Endif.
 Endloop.
Endif.
c)create a Screen group(Z1) as sushipal reddy showed int he atatched link.
d)go to Method IF_EX_VENDOR_ADD_DATA~CHECK_ADD_ON_ACTIVE and add following code
if i_screen_group = 'Z1'.
e_add_on_active = 'X'.
endif.
e)Go to method IF_EX_VENDOR_ADD_DATA_CS~GET_TAXI_SCREEN and type following code
IF sy-tcode EQ 'XK02'.
 e_screen = '0101'.
 e_program = 'Z_ADD_FIELD_XK02'.
 e_headerscreen_layout = 'E'.
ENDIF.
f)thast it...go to xk02 u willl see an al push button and click on it..u can view the screen field...

Infotype Screen Control (T588M) not working for additional fields to contro

Hi,
I have a requirement to enhance IT 0002 with fields LNAMR, FNAMR and CNAME. Also field preferred language.
I have included LNAMR, FNAMR & CNAME as additional fields in the Include Screen 2040 elements, lay editor and maintained table T582c where i have assigned enhancement to the standard screen. These fields are getting displayed in infotype 0002
But the issue is Infotype Screen Control (T588M) is not working for these fields to control the display or hide.
Has any of you come across this issue? what could be the reason for this issue? Please suggest ASAP.
Thanks in advance.
Regards

Hi Experts,
Please help with your inputs and suggestions.
Regards

How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN

i am facing problem in Report RMclobjvn , TCODE is CL6BN
i have to add some additional fields on the result screen.
but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
Exit name
CLCLRS01 Additional Fields on the Result Screen
CLCLRS02 Fill the Additional Fields on the Result Screen
i activated the these exits and have tried putting in break point in side the include.
But the problem is this that
[b]that CL6BN Tcode is not triggering anyhow these userexits.
does anyone has any solution for adding the additional fields.

Hai Manish
Check the following Links
You can do it in two ways using append structure or include structure of that standard table.
once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
check this SAP help..
for append structure
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
for include structure.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
Regards
Sreeni

Additional field in the sales order header Purchase Order Data tab

Hi,
I want to add an additional field in the below screen:
VAO1 > Go to > Header > Purchase Order Data >
Under Sold to party section i want to add an additional field.
Is this possible through configuration?
Please let me know.
Thanks in advance
Edited by: Kase on Dec 20, 2011 7:06 AM

Hi Kase,
Check this below link it might be helpful for your issue
sales order - Additional data B
new fields in sales order
Regards
Pradeep

Adding code to additional fields in Ad Hoc Query

Hello,
I am trying to add code to existing additional fields available in IT0001 - Field SYHR_A_P0001_AF_PL_CTRY.
I have added code in the field code section, but the field does not get populated.
I also tried to add code to Start of selection / Record processing sections, but the values are not populated.
What am I doing wrong?
Thanks,
Vaishali

Hi Vaishali,,
   Your question is not clear, no probs. you plz check this code !!
FUNCTION zhrintf_om_pernr_info_adhocqry .
""Local Interface:
*" IMPORTING
*"     VALUE(FI_PERNR) TYPE PA0001-PERNR
*"     VALUE(FI_BEGDA) TYPE PA0001-BEGDA
*" EXPORTING
*"     VALUE(L_MC_STEXT) TYPE HRP1000-MC_STEXT
DATA: dep_text(40) TYPE c,
        l_plans TYPE pa0001-plans,
        l_sobid TYPE hrp1001-sobid,
        l_mc_short TYPE hrp1000-mc_short.
Get Employee Position ID
SELECT SINGLE plans
    FROM pa0001
    INTO l_plans
    WHERE pernr = fi_pernr
          AND begda LE fi_begda
          AND endda GE fi_begda.
l_sobid = l_plans.
Check if OU is Department
IF ( l_sobid NE '00000000' ) AND ( l_sobid NE '99999999' ). " Terminated Employee
    WHILE NOT ( ( l_mc_short(1) EQ '2' ) OR ( l_mc_short(1) EQ '1' ) OR ( l_mc_short(1) EQ 'X' ) ).
      SELECT SINGLE sobid FROM hrp1001
             INTO l_sobid
             WHERE objid = l_sobid
             AND    rsign = 'A'
             AND    sclas = 'O'
             AND    begda LE fi_begda
             AND    endda GE fi_begda.
      SELECT SINGLE mc_short mc_stext FROM hrp1000
             INTO (l_mc_short, l_mc_stext)
             WHERE otype = 'O'
             AND    objid = l_sobid
             AND    begda LE fi_begda
             AND    endda GE fi_begda.
Empty l_mc_stext if OU is not Department
      IF NOT ( ( l_mc_short(1) EQ '2' ) OR ( l_mc_short(1) EQ 'X' ) ).
        l_mc_stext = ''.
      ENDIF.
    ENDWHILE.
ENDIF.
ENDFUNCTION.
Regards
Zulfikhar Ali

Additional field added in Infoset unable to use as a selectable field

I added 2 fields as additional fields to the Organizational Assignment infotype in a PNP Infoset that I created via SQ02. When I select the infoset to build a query via adhoc query the fields are listed in the Org Assignment infotype and available for output but are not available as a selection field. There is no check box under the Selection column, only a checkbox under the output column.
How do I make the added additional fields available as a section field as well as an output field.

Solution: in ad hoc query select Extras > Switch off object selection

SAP Query Documentation - Defining additional fields

Hi,
I need to create a new SAP Query defining a new Functional Area. My problem is that I have created the area and defined the tables I want to use and how to join them, but I want to add additional fields with ABAP coding. I have looked up for documentation on how to do it, and all I find is that I shoud access the menu GOTO/Additional Field, but in my screen I find no such option (I'm using 46B).
Could anyone explain how to add additional fields and coding, or send me any documentation please??
Also, is it possible that I can create functional areas and queries, but not edit ABAP coding from functional areas in my productive system? Do I have to create the query in my test system and transport it, or how does that work? I's my first time creating queries.
Thanks so much in advance!

Try
http://www.sappoint.com/abap/ab4query.pdf
http://www.sap-img.com/basis/transport-of-abap-query.htm
Pl. award the points if it helps you ...
Thanks
Message was edited by: Saquib Khan

Additional field for Material Master of SRM

Hi,
We want to add 3 additional fields to the product master table of SRM. We do not want to use these additional fields on any documents (neither SC nor PO nor contracts etc). We do not want to display these additional fields on Enterprise Buyer screens.
What we want is, after adding these fields to the products table we want to edit the values on COMMPR01. Is it possible to see and edit these additional fields with txn COMMPR01? If not how can we edit these fields?
Thanks
PS: the fields that we want add are: New category name (other than the EBP category), New material code (other than the regular material number), Country Name (we have 2 backend systems, we want to keep the name of the country of the backend).

Hi,
How can I do that?
I have 2 fields to reply to COMMPR01:
MARA-ZZCOD_CORP (Customer Field)
MARC-EKGRP
Any ideia to reply this with standard process?
Thanks,
Pedro

Additional Field Availability in MIGO Screen

Similar Messages

Maybe you are looking for