Additional fields not getting copied from change req to change doc

Hi,
I created some addtional customer fields which I added both in change req and change doc.But the entries given to those fields are not getting copied from change req to the change doc as like standard SAP fields are getting copied.
Please let me know if someone worked on the similar issue.
Regards,
M.R

Hi,
We have done a similar requirement of adding additional fields in Quotation doc type  at header and item level .
Also we have got the Reference data of the order being created to flow in to Additional Data B .
This is purely Abaper's Coding .when you add Additional Fields there is screen logic also to be coded for these screens .
to get the Reference order data logic has to be written in PBO of the screen which u have added additional fields .
the reference data will be validated with "VGBEL" field in VBAK table .If VGBEL is not initial then Query the VBAK table for this data in VGBEL into Internal table or work area and update the screen fields in additional data with these fields .
I have done the same and it is Working Wonderful .
Try this and Let me know Further. All the Best.
Thanks,
DevendraP.

Similar Messages

  • Billing Plan Data not getting copied from Contract to SO

    Hi ,
    I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
    Please guide me on how can this be done.
    Regards,
    Madhav

    Hi,
    plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
    you can either use routine-401 or 402

  • Item Number not getting copied from Delivery to Invoice

    Dear Experts
    I am having a problem where Item Number in Delivery is 10 and in Invoice it is 11. The item number is  not getting copied from Delivery to Invoice. I have checked the copy control option and copy item number is checked.
    Please advise

    Hi,
    In VOFA Item no. increment has already been maintained as "0" but the problem is still there.
    Regs

  • SPED inbound delivery creation, serial num not getting copied from out delv

    We enabled SPED to create inbound delivery against outbound delivery
    We observed Serial numbers are not getting copied from outbound delivery to inbound deliver
    can some one help
    Moderator message:
    Locked. Reason: duplicate.
    The new post: STO GR against outbound delivery/inbound delivery
    Edited by: Csaba Szommer on Jan 9, 2012 4:16 PM

    Hello Mohammed,
    Go through these SAP Help Pages for Delivery Creation from SAP TM. It will help you to check where have you gone wrong is the setup.
    Creation of ERP Deliveries from SAP TM:
    ERP Logistics Integration - SAP Library
    Creation of Delivery Proposals:
    Creation of Delivery Proposals - ERP Logistics Integration - SAP Library
    Monitoring of Delivery Creation:
    Monitoring of Delivery Creation - ERP Logistics Integration - SAP Library
    Kindly let me know if it works, or else give me some more detail regarding your steps you are doing and your scenario. It might be helpful to understand and then I can provide you a solution.
    Thanks and best regards,
    Navin

  • Validity end date is not getting copied from inquiry to quotation.

    Hi Friends,
    While creating quotation the validity end date is not getting copied from inquiry to quotation.
    What setting needs to be done, pl suggest.
    Regards,
    Hari.

    Sreehari,
    i dont find any logic of having Same validity date for Quotation and Inquiry....
    the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
    There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
    Thanks,
    raja

  • Partner roles not getting copied from customer.

    Hi ,
    Partner Roles not getting copied from customer to delivery Document .
    we have created one delivery document from a purchase order and when trying to create billing document from that delivery document it is giving log "payer" and ' Bill to party " not maintained.
    when checked in partner tab in delivery document these partner roles are not present there . so what can be the probable reason . These partner functions are maintained in customer.
    thanks!!!!!!
    which customizing seeting to check for this

    Hello Payal,
    Please go to T.code VOPA i.e. Maintain Partner Determination and select Delivery from the list and then click Partner Procedurers and select the relevant delivery type and double click you will get mandatory Partner Functions like Sold To, ship To, Bill to are ticked or not.
    Reward if useful

  • Profit Center not getting copied from WBS master data to settlement rule

    Hello,
    I am facing issues during settlement to G/L. From FI side we have set up some validations that the  FI postings shld always carry a Profit Ctr. Now when I am doing settlement to B/S account, the profit ctr from WBS master data gets copied to settlement details and hence on FI posting (Credit line).
    However when I am trying to settle to Expenxse/P&L account this is not happening. The profit Ctr is not getting copied from WBS master data to Settlement details and hence the settlement is not going thru. The profit derived is a dummy profit ctr and not the one on WBS master data.
    I have posted this query on FI forum too but no satisfactory answers.
    Pls let me know, what is the system behaviour....will the prof ctr on WBS master data gets copied on settlement rule details automatically ?
    Sarang

    Which exit do I use in OPSN? any thts or some exit in FI?
    I am on ECC-6.0...
    One thing to mention, the prof ctr is getting copied to settlement rules for Balance sheet account but not for P&L.This is more confusing...
    Sarang

  • Weights are not getting copied from quote to order

    Hi All,
    While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in  quote has weight.
    Why are the weights not getting properly from quote to order .

    hi
    goto VTAA and select the target document
    click on Magnifying glass symbol
    here check whether you have selected complete Reference or not
    But if you select this then the system copies the source document completely.
    Procedure
    If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
    Regards

  • Gross weight and net weight not getting copied from Inquiry to quotation

    Hai Gurus
    Could anyone tell me why gross weight & net weight for the particular quantity of goods are not getting copied to quotation and order from an inquiry. All other details that I maintain in an inquiry (shipping type, receiving point etc) are getting copied  to quotation.
    regards
    John
    Edited by: Gino12 on Nov 11, 2010 12:49 PM

    Dear
    Did you maintain in MM02-MMR-Sales/Plant  view Gross weight and Net wirght ??
    System calculates the net weight based on the order quantity for the item and the net weight proposed from the material master record. If the item has more than one schedule line, the system uses the total order quantity of all schedule lines to calculate the net weight. In sales documents where schedule lines are not allowed (contracts, for example), the system calculates the net weight using the target quantity.
    Regards
    JH

  • Scheduling Agreement - Conditions not getting copied from Contracts

    Hi All,
    Requirement: Global outline agreements with scale prices will be created in SRM which will be into ECC as Contracts. Scheduling agreements will be created referecing the Contracts and the conditions with the scale prices needs to be copied into the scheduling agreement.
    Issue: We could create Global outline agreements in SRM and are getting replicated into ECC as contracts successfully. Conditions and the scale prices are not getting copied into the Scheduling agreement from the Contracts.
    Please guide.
    With regards
    Krishna

    Hi,
    I couldnt reach out a solution for this problem.
    SRM Version: SRM 5.0
    Yes. We create Scheduling agreements referencing the contracts.
    With regards
    Krishna

  • Manual discounts are not getting copied from Quote to Sales order

    Hello All,
    If I assign a manual discount to any item in Quotation document, this condition type with its discount amount is not getting
    copied over to Sales order document, I have selected the drop down "D Copy all conditions" in the copy control for item categories,
    and both quote & Sales order use the same pricing procedure, i am i missing something here?
    I appreciate your help
    thanks
    Chandu

    Hi Chandu,
    Please try to adopt the standard pricing type in the copy control between QT and OR which is "A - Copy Pricing components Unchanged and redetermine Scales".
    Please share the outcome.
    Regards

  • PO Custom Field not getting filled from Shopping Cart

    Hi Gurus,
    I am new to SRM. The requirement I had was to add a new field to the SC. I read several posts and articles on this but couldn't find the solution to it. I managed to do this modifying the corresponding structures in SRM and making the necessary changes in R/3 so the new filed can be seen in ME21/22/23N.
    I checked Andreas Milbredt document to achieve it as mentioned:
    Document: How to transfer custom fields from SRM to Backend.
    http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27
    After that, when I create a Shopping Cart, the value in the New field is not transferred to the Back end.
    I coded the following BADIs and User Exits:
    In SRM:
    BBP_CUF_BADI_2 (MODIFY_SCREEN) ->To enable or disable the field depending on conditions. Works fine.
    BBP_DOC_CHECK_BADI (BBP_DOC_CHECK) -> To do some checks. Works Fine
    BBP_CREATE_BE_PO_NEW (FILL_PO_INTERFACE1) ->Here I fill structures BAPI_TE_MEPOITEM and BAPI_TE_MEPOITEMX. I added another u2018Xu2019 to indicate the new field to BAPI_TE_MEPOITEMX. But I think I am not doing it right. This structure BAPI_TE_MEPOITEM/X, does the order of the fields correspond to the order of the fields in any of these 3 structures (which I am using)?
    INCL_EEW_PD_HISTORY_CSF
    INCL_EEW_PD_ITEM_CSF
    INCL_EEW_PD_ITEM_CSF_SC
    I also checked the following link:
    Map a custom SRM field to a standard field in R/3
    In R/3 I populated the Exits Andreau2019s mentions on his article. Am I missing anything else?
    Thanks & Regards,
    Ernesto.

    Hi Ernesto,
    You can find out how your BAPI structure is being populated (by generating the test data ) using FBGENDAT program and activating the BAPI_PO_CREATE1 (and you will need to set the parameter for the specified user id)... This will provide you ability to execute the BAPI offline and figure out what is happening...
    Note 517767 - Generate test data for function modules
    Things to look for, Is any of your custom fields quantity fields or integer?
    Check out the following OSS note
    Note 509898 - BAPI enhancement concept and Unicode
    Also check out the following SDN Thread,
    problem using  BAPI_BUS2001_CREATE to create project definition
    Check out a similar thread that we are discussing (for PR)
    Custom Fileds Data Was Not Getting Updated In BAPI_PR_CREATE

  • Contract item customer fields not getting saved from ITS side??

    Hi there,
    I have had to add "account assignment" details to a contract item (3 fields: account assignment, G/L account and cost center)...
    All is going fine....in fact the 3 fields have been added on the contract item level in function group BBP_CTR_UI_ITS screen 4100. I followed the instructions in SAP note number 458591 "user defined fields: preparation and use"...
    The 3 fields I added where "generated" down to SAP table level and now appear in table BBP_PDIGP...
    Also when I create a contract from transaction BBP_CTR_MAIN and fill my 3 new fields in on the item level all works fine when I release the contract...the contract item gets created and the 3 new fields appear nicely in table BBP_PDIGP....so from the GUI side all is PERFECT...
    I have worked on the ITS side of things quite a bit but now I clearly don't understand something...
    I go to "internet service" BBP_CTR_MAIN - template SAPLBBP_CTR_UI_ITS 4100.....I have added my code and my 3 fields display perfectly on the web page....for each contract item.....
    As I said I can make the contract with the 3 new fields filled perfectly via the GUI (transaction BBP_CTR_MAIN)....and if I VIEW that contract on the web it also displays perfect with the 3 filled in fields....
    If I COPY that contract.....and save the new one, the 3 fields are still fine, all saved.
    NOW COMES THE PROBLEM:-)
    If I create a new contract from the web, fill in my 3 fields on the contract item level THE 3 FIELD VALUES SEEM TO NOT GET POSTED BACK AND SAVED IN THE SRM DATABASE...
    I have tried everything from using FIELD-GET, FIELD-SET...the note I mentioned above mentions some BADI's that I could possibly use:
    BBP_CUF_BADI_2 (modify screen methods etc)
    BBP_DOC_SAVE_BADI
    All I really want to try understand is how interaction between the user clicking on the web page and the SAP GUI screen flow is really happening.....I mean I see in function group BBP_CTR_UI_ITS there are a number of function modules with ITS in them, are those function modules just called when the user is clicking on the web (via ITS etc) - I would assume so...
    Bottomline is I need what is happening in the SAP GUI to happen on the web as well.....it is almost there, I just need a push in the right direction so that I can grab the fields from the web page, in the most standard way possible.
    Thanks for the help, I am very curious to see how this sort of solved.
    Regards
    Lynton

    He Yann,
    We are running SRM 3.0, EBP 4.0 - support pack 8
    Thanks for the help
    Lynton

  • Supplier Note gets copied from Catalog Item to Non-Catalog Item

    Hi All,
    The basic issue is that when we create a mixed shopping cart, cart with Catalog and Non-Catalog Items (Made using Describe Requirement link), the Supplier Note (in the Documents and Attachments part ) from the Catalog Item gets copied to the Non-Catalog Item directly when we create the Non-Catalog Item.
    We face the issue only when the first Item is a Catalog Item. ...
    There are no custom developments for the Supplier Note and we do not modify it directly in any other way. Any Ideas .. ?
    Thanks and Best Regards,
    Sagar Ogale

    Hi Bharath,
    The issue is that for the Non-catalog ( Item created using Describe Requirement ) in SRM 5.0, the supplier note field is getting populated by default. This is the issue.
    The Supplier's Note should remain blank. But, its not... This is the issue. Do you have any ideas what may be causing the issue..?
    Thanks and Best Regards,
    Sagar Ogale

  • Package not getting Copied from One Team Folder to Other.

    Hello Experts,
    I am working on SAP BPC MS 7.5 Ver. and while trying to Copy Package from one Team Folder to other ( i.e. Copy Import package from Company Folder to any other Team Folder) via Organize package List,but I am not able to do so.
    The package is getting copied successfully but not getting saved in the respective team folder.
    I have aasigned the destination Team folder, the Execute Access of Data Manager.
    Can anyone pelase help on the same?
    Regards,
    Apoorva

    Hi Apoorva,
    you have to set the destination team and group, click on ok this will copy the package and at the end the save button to apply the changes.
    You can also copy manually from one folder to the other the dtsx file and after you can made it visible via Organize package List by adding the package.
    Regards
         Roberto

Maybe you are looking for