Additional fields to be displayed in calibration order

Hi Experts,
Following fields are required to be displayed for Calibration Order ---
1) Completion Date (mandatory) - Somewhere in header
2) Person Responsible (Mandatory) -Somewhere in header
3) Department (Mandatory) - Somewhere in header
4) Frequency - Somewhere in header
5) Due Date - Somewhere in header
Is there any setting in img where i can make these fields also visible and set them as mandatory.
Looking for a quick response.
Thanks in advance
regards,
Abhi

Thanks Bala,
But i don't want to do any unnecessary customization.
So the 2nd option seems to be better...
Completion date i can see under the Planning Tab but its not mandatory. My ques is 1) is it the same field am looking for? 2) If yes then how to make it mandatory?
For Person Responsible i can see a field at the Order - header but again it is not mandatory. How to make it mandatory? or else as suggested by you if i go for PDP how to use it? and do i need to have Hr integrated to see the values under Person Responsible?
Same applies for Department -- how to use the parner function. and there is no separate field to display it. so whre will it be displayed. Do i need to customize it?
Frequency - No doubt i cn see it in the report, but is there any way i can display it at the header? I guess the only way is the customization?
Thanks
Abhi

Similar Messages

Additional Fields in VBAP ( Line Item Sales Order )

H i
To Add New Fields in Additional Data B Screen of VA01 Screen , Line Items VBAP Table
1.Create an append structure for VBAP containing the new fields*......( Plz tell me how to Append and create new field with ZZ)*
2. modify user exit screen SAPMV45A 8459 to map the new fields...( When i go to VBAK screen -Systemstatus--Screen Program ---*Screen No 4002 instead of 8459 ....... WHAT I NEED TO MODIFY)*
2. modify user Include MV45AFZZ to add ABAP logic*....... LOGIC PLZ
Regards
Rohit

Hi,
1.Create an append structure for VBAP containing the new fields*......( Plz tell me how to Append and create new field with ZZ)*
>>>> Go to table VBAP, click on the button append structure enter a zzname create structure add fields to the strucutre.
2. modify user exit screen SAPMV45A 8459 to map the new fields...( When i go to VBAK screen -Systemstatus--Screen
Program ---*Screen No 4002 instead of 8459 ....... WHAT I NEED TO MODIFY)*
8459 is the subscreen that you cna edit to add your custom fields
2. modify user Include MV45AFZZ to add ABAP logic*....... LOGIC PLZ
MVMV45AFZZ you can add logic to populate the fields
Regards,
Himanshu

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

Multiple Value in additional fields using SAP Query

HI All,
I have a question related additional field in SAP Query. I tried to create report about PR and PO using SAP Query. Since one PR can be converted to multiple PO, I decided to create additional field
po_1
to display the value of PO that related to the PR. But I meet problem when I want to show several PO number in additional field
po_1
, I couldn't look the way to solve this problem. Can anybody help me? Just for info, I assign value to additional field
po_1
in record processing part.
Thanks....

HI,
IN SQ02, IF table is already in JOIN, just click on the PLUS sign to expand the strcture.
All the field showing Plus sign in the strcture are selected in your query and with MINUS sing are no selected.
So you have to just click on the MINUS sign for the field you want to use through table field.
Generate the query and execute thriugh SQ01.
If you want to add some other field which is not a part of JOIN,
then click on EXTRAS Button shown in the MENU option.
Click on Create button and system will ask abt the additional field.
Regds,
Anil

I need to add fields in additional fields B the sales order line item

i need to add fields in additional fields B beside the field (icon_val_quantity_ structure) in the sales order line item, How to achicve this? please help me..

Please fined the below solution for achieving your requirement.
1. Add new filed "B" in table VBAP.
a) T.code SE11 --> Enter structure name VBAP --> display
b) Goto --> Append Structure --> Enter Structure name and new field "B"
2. request your basis team and take the access key for modification of stabdard program SAPMV45A & Screen: 8459
   a) After receiving access key for standard program then got o SE51 --> enter program name SAPMV45A & Screen: 8459
   b) click change Button
   c) click layout button
   d) add new field "B" below of the screen (F6 -> enter table name : VBAP --> get from dictionary --> selet new field and past in screen )
3) write below code in flow logic
PROCESS BEFORE OUTPUT.
                           Verarbeitung vor der Ausgabe
MODULE ZZPB_INITIALIZE_8459.
MODULE ZZPB_OUTPUT_8459.
PROCESS AFTER INPUT.
CHAIN.
    FIELD VBAP-New field name "B".
    FIELD ZVC_SALES_EXPORT-ZZAPLHENKO.
ENDCHAIN.
MODULE ZZPA_OUTPUT_8459.
4. functin Module code
module ZZPB_OUTPUT_8459 output.
Data: l_v_actve type ale_active,
        l_v_ttyp type c.
Data: l_v_tragr type tragr.
l_v_ttyp = t180-trtyp.
if l_v_actve is initial.
    l_v_ttyp = 'A'.
endif.
LOOP AT SCREEN.
    CASE l_v_ttyp.
      WHEN 'A' OR 'C'.
        SCREEN-INPUT = 0.
    ENDCASE.
ENDLOOP.

How to create the additional field on Maintenace order

Hi,
For adding additional field on order -
I am aware about the facility in SAP, in which we can create the view profile, which contains the various tab pages and the sub tab pages(Which are subscreens). When we assign this view profile the order type then we can view the various fields selected in the view profile in the order screen in IW31 T code.
Now if i want to add some additional field then i can create the additional screen using the user exit and then assign it in customisation to the view profile and then to the order type.
But is it possible to add the field by using any other way?
If yes, request to let me know in detail alongwith the user exist if any.
Thanks

Hi all,
Thanks for the quick reply. As per as the field key is concerned, i dont want to use that.
I can add field by designing the new screen and adding it in the view profile but the main problem is that whenever i add the view profile to the order type, the standard tab pages are not appearing as a default and i have to add the screens as per the standard (to the view profile).
Pete
About IWO10018 -
I have gone through the documention of the user exit it says that to add the additional fields on the order header, one has to append the structure CI_AUFK with the custom fields/additional fields and then use the function EXIT_SAPLCOIH_018 and 19 to transfer the data to and from the screen area to the SAP but the one point i am not sure about is how the custom fields updated in the structure will get displayed on the main screen(to input the value into them into screen) .
Thanks
Edited by: Raghunandan Iyer on Jul 29, 2008 2:11 AM

Additional field(company code) in purchase order screen layout

Hi All experts,
I have a requirement to set the company code in Purchase order as display field during PO creation or change.
I have checked in IMG under screen layout for purchase order but there is no company code field available.
How can I add the additional field into the screen layout.
Any inout will be highly appreciated.
Thank you in advance
Lost.

Hi Chee Wan Ng,
<b>Where</b> exactly you want to set the Company Code field in the Purchase order? Actually this field is already available under <b>Org.data</b> tab in the Purchase Order Creation transaction (ME21N), so you may not require to set the Company Code again.
Which version of SAP R/3 you are using?
Hope this helps you, if not, then give us more details to help you better.
Good luck.

Additional Field in Production Order

Hi,
I need to add a new field in the production order in the seperate Tab. Can anybody tell me the userexit for this. I need the same field to save some data from that sales order. To save the data i know the Exit but for additional field need ur help.
Thanks
SISL

Hi,
The exit you're using (PPCO0007) should meet your need.
The exit - PPCO0006 is called during creation of order, so there could be an option where a user might delete these values.
Another alternative which you can think of is BADi - WORKORDER_UPDATE.
Good luck.
Regards,
Vivek

Additional Field in Planned Order

Dear Experts,
Is there any additional field can be used to store additional informaton like shift?
For an example:
Shift Y appear in upload planned order program, then Y will be shown in Planned order.
Is there any addinitional field or user exist can be used in planned order?
Thank you.

dear friend,
there is NO any field you can use for your particular purpose.
I suggest you can't use any user exist.
Ask your abaper to extend the standrd table PLAF
or
to create a new custom table and write a program which uses it.
good luck!

Additional field in the sales order header Purchase Order Data tab

Hi,
I want to add an additional field in the below screen:
VAO1 > Go to > Header > Purchase Order Data >
Under Sold to party section i want to add an additional field.
Is this possible through configuration?
Please let me know.
Thanks in advance
Edited by: Kase on Dec 20, 2011 7:06 AM

Hi Kase,
Check this below link it might be helpful for your issue
sales order - Additional data B
new fields in sales order
Regards
Pradeep

Additional field in the sales order screen

I need some additional field in the sales order screen. There is
also no screen exit available for VA01. Can I use this
additional data B tab in header details by creating additional
field in it. Please tell me how to use this tab or how to get
different field in the sales order (header or item level).

Hi,
Yes. You can use this screen. For this either can modify the table VBAP with additional fields and put them on this screen.
You have to code your logic to save these values in the include MV45AFZZ. The subscreens you have to use for this are 4462 or 8459.
refer Screen exits - Urgent.
with regards,
Vamsi

Additional fields for line item display for Vendor Accounts

Hi,
The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
Could you help me to know how the same will be displayed in ECC 6.0 system.
Thanks

In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
Thanks

Work Order field define and display in Operation TAB

I have a question about the user field define in work order's operation:
I define the user field in the standard IMG for operation's Enhancemen use. but the field can only display in the operation's details' Enhancemen Screen.
What I want is the User field can display in the Operation list screen.
BTW:what does the Equipment numnber in Operation TAB 's meaning
thanks a lot

Duplicated [here|Work Order field define and display in Operation TAB;

Define Additional Fields for Line Item Display

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Paresh Jivani
Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

Hii,
When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
Dhara D.

Additional fields in MAM order

Is there a way to add additional fields to the M/AM order screen without changing the SAP standard screens?
I need a field to capture the contact person for the order.

Hi,
Please use the screen exits provided by SAP. Exits are available for screen modifications at header level, item level and billing dataset level. Refer to the documentation in SPRO -> SAP Media -> Tools-> User Exits.
Regards
Mahendra

Additional fields to be displayed in calibration order

Similar Messages

Maybe you are looking for