Additional files with source file

Hi Experts,
I have a source xml file, one tage has a link from where the additional file has to be downloaded and transferred to the target folder.
Such as the one shown below...
<name>file1</name>
<link>http://xyz</link>
Can u help me on how I can acheive this requirement??

Hi Teja,
This is not possible by using the standard adapters. for this you have to write the separate java module.
FYI
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?quicklink=index&overridelayout=true
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
/people/gowtham.kuchipudi2/blog/2006/01/04/testing-sample-adapter
Regards
Ramesh

Similar Messages

HTTP to File with source XML validation

Hey guys
i have a HTTP to File scenario wherein i m getting XML over HTTP from an external system.i need to perform a validation check on this payload and if the check fails then i need to send this payload as a mail attachment to a certain address,if check is successful then i need to post this XML to the File server.
i have done simple scenario without any validation but now i need to upgrade and perform validations,do i need to do that in Message mappin?
some links will be really helpful
thanx
ahmad

Hi,
I hope the following two ways are possible.
1)
Maintain one message as source and two messages as target.One is actual message and second one message structure should containt the structure with error details with source details.
Validate the message in MM with UDF.
If the source is valid then assign the msg to correct target messages.and ResultList.SUPPRESS to suppress the second message
Else then assign the error details with source details to second message.and ResultList.SUPPRESS to suppress the first message
Be sure that the target messages occurrences are 0..unbound or 0..1
then use the IM in interface determination.
and maitain two CCs one for actual receiver, second for MAIL receiver with HTTP attatchment.
2) You can raise an alert from payload. in alert you should maitain the mail, su01 mail id , designated reciept.
See the below links
Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
Regards
Chilla

Time Machine: External Hard Drive with Additional Files + Back-up

Hi-
I am hoping someone can clarify something for me. I use a 500GB external drive (WD-My Book) to back-up my macbook periodically (2x month). I also use this same external drive to store additional files from an old computer.
I just spoke with some folks at Apple and they confused me and made me think that I might have inadvertently deleted some of the original non-back-up files. However, I have scoured the drive and everything seems to be there IN Addition to the backups.backupdb folder.
Can someone reassure me that I have not somehow corrupted/lost either the original files or the back-up files?
I have read the tutorials posted in 2009 - and realize that I should have partitioned the drive, but I didn't. Moving forward I will purchase a dedicated drive just for back-ups - but want to be able to sleep tonight and not worry . . .
Thanks!

claisb wrote:
Wow-Thanks again.
Apple Support was marginally helpful. After the rep told me I probably lost data, my anxiety rose . . .
My original Time Machine question to Apple Support =
My MacBook cannot handle all the media I have. So, I bought a Seagate 1TB to hold movies, photos, and music. If I have the 1TB Seagate plugged in to my MacBook at my designated back-up time, will Time Machine back both the HD and Seagate 1TB to a new (yet-to-be-purchased) 2TB External drive (which will be purchased solely for Time Machine files)?
Yes, as long as both are formatted for a Mac (see #1 in Formatting, Partitioning, Verifying, and Repairing Disks).
The Seagate might have been automatically excluded from backups; if so, it's easily removed, via Time Machine Preferences > Options. If it's listed in the exclusion box +*in black,+* (while it's connected) just select it and click the minus sign at the bottom. If it's listed in gray, it's not formatted properly -- Time Machine can't back it up, and you can't remove it from the exclusion list.
I'm having a difficult time knowing if I'm utilizing Time Machine properly. Since I have a MacBook it doesn't make sense for me to have Time Machine continuously running in the background. So, I only back-up 2 or 3 times a month. And, each time - I seem to get nervous that I'm not doing something correctly.
Time Machine was designed to back up hourly. On a desktop Mac, it's best to let it do just that.
On a laptop, of course, that's rarely practical. But you probably should back up more often -- when your internal HD fails (they all do, sooner or later), or something else awful happens to your Mac, you risk losing everything you've done since the last backup. Think of your Address book, browser bookmarks & history, documents, and especially your media files.
You might want to consider backing-up over your network. It doesn't sound like you also have a desktop Mac, but if you do, you can back up to a "shared" drive on it.
It's a lot more money, but Apple designed the Time Capsule as a combination wireless router and hard drive specifically for Time Machine backups. Most folks do the initial backup while connected via an Ethernet cable, but subsequently Time Machine can do those hourly backups wirelessly, as long as your Mac is awake and in range of the Time Capsule. See http://store.apple.com/us/product/MC344LL/A/Time-Capsule-2TB?fnode=MTY1NDA0Mg&mc o=MTMzNzU2MjI
But as long as you're diligent about doing your backups regularly via an external drive, a TC may not be worth the big bucks, especially if you already have a wireless router.

After signing with e-signature acrobat creates an additional file starting with aa

I open a file and place a signature on the document. After placing the signature, and locking the file on save, it overwrites the existing file fine, however it creates an additional file in the folder and the files start with aa. example: aab03284 (No file extension is attached)

I have also had this issue - and it just randomly started happening, along the same time the request to do EchoSign disappeared (not sure if they are related). I'll save as over top the existing file, and it asks if I want to do that, I hit 'yes' and it then creates a temporary file instead of saving it over the existing. I have to then go back in, 'save as' again, say that I want to do that again, and then it finally saves over it correctly.

Problems working with source files

Just downloaded the new 1343 release. Really like the product. But ... working with source files in SQL Developer is my worst nightmare. When I open a source file either from SQL Worksheet or from File/Open menu my PC freezes for an extended period of time. CPU utilization shots up to 100% and stays this high until the tab is open. I am on Windows XPSP2. Help!!!.

We have reproduced your issue. If I open a large plsql program from the main SQL developer window (File Open) option it opens in a second or less. If from within the SQL worksheet, i right click and do a file / open on a small file it open in a second or less. If I right click in the SQL worksheet and do a file/open of a larger plsql program it appears to hang SQL developer.
We are looking into the issue.
Thanks,
Mike

LoadExternalModule throws error (-7 Unknown file extension) when working with source-code.

Utility library function LoadExternalModule (admittedly marked as obsolete - but key to one of our older software)
fails with error code (-7 Unknown file extension.) in CVI 2012SP1 and 2013 Version 13.0.0(647) on Win7
The suggested alternative Win32 API GetProcAddress doesn't work with source or obj files (so isn't an alternative at all)
The Target-Settings to "Enable LoadExternalModule" are already checked.
Any suggestions ?
This code-snipped shows the behavior :
// File "Main.c"
#include <utility.h>
int main(void)
void (*funcPtr) (void);
int moduleID;
int status;
// Library-Function-Error : -7 Unknown file extension.
moduleID = LoadExternalModule ("Test.c");
funcPtr = GetExternalModuleAddr (moduleID, "test_function", &status);
(*funcPtr) ();
return 0;
// File "Test.c"
void test_function(void)

Hi,
Thanks for teh inf regarding the LoadExternal Module,
Using the LoadExternalmodule as you mentionned requires using a .obj file but this lead me to an issue getting a Control value from an .obj file called from a dll
When using the LoadExternalModule function in CVI 2013, we can no longer use a .c file. Instead we have to use an .obj file.
My issue is that' impossible for me to get a control value from an .iur managed by the .obj witchi is called by a dll.
Otherwise it's impossible for me to get the control vale when calling the .obj from a dll.
Any suggestions Amigos
Thanks

ZIP FileName (Additional Files)

Hi, My sender FTP channel picks two files Main& Additional file suing adavanced options and zips it using Payloadzipbean and writes to the target without any mapping,however the name inside the zipped file is "MainDocument & File"
How can i get the original file name as in the source directory inside my zipped file? I think I need a module for this but not sure how to access the source filenames inside the module any help would be greatly appreciated.
Thanks,

Thanks Ryan, as i cannot attach the screenshot here is how the soap header looks..
<Inbound Message>
<Soap Header>
<Soap Body>
<Payloads>
MainDocument (application/xml)
<File> (application/xml)
<Receiver Identification >
The two payloads when doubleclicked opens up the pdf documents, The dynamic Configuration contains the name of the Main Document i.e..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">601070461-601070461-WB.pdf</SAP:Record>
</SAP:DynamicConfiguration>
Now when I use PayloadZipBean in my reciever File adapter the zip file is written as
Output.zip->when Unzipped>MainDocument &_File_ , with no extensions.
I have tried to include a custom module before PayloadZipBean to set the ContentType of the MainDocument and gave the parameter zip.filenameKey = contentType ,but still the Archive filename in the zip file does not change.
Kindly let me know if you need further info..struggling wid this ) i could send the screenshots to ur mail(if u ok to provide)
Many Thanks,

File adapter: Additional files option and Archive option

Hi all!
I configure file adapter to take file with two additional files. Additional files is optional. Also I configure to processing mode to archive.
So when I put all three files in folder everything works fine - all files are archived.
Problems begins when I put not all additional files for example:
1) when I put one main file and the FIRST additional file, files are archived, in communication channel monitoring i see error in message java.lang.NullPointerException, but message with payload transfers to IE successful.
2) when I put one main file and the SECOND additional file, the main file archived, the SECOND file NOT archived and stayed in source directory. In CC monitoring I see error message java.lang.NullPointerException, but message with payload transfers to IE successful.
Please provide me with some solution, because I need to archive all files.
Maxim.

in file sender CC, thr is option to archive and error file store also..
1)under processing mode - archive.. give the path thr..
2) To archive source files where a permanent error occurred during processing, select Archive Faulty Source Files
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/658abd344a4de0e10000000a1553f7/frameset.htm

Have an additional file

Hi,
In my scenario, I would like split a message with key fields.
     -> File 1
File    -> File 2
     -> File n
but with each files, I would like attach a referential file:
     -> File 1
             (Ref)
File    -> File 2
(Ref)          (Ref)
     -> File n
          (Ref)
This referential file is no map or convert, a simple forwarding.
I try to use the option "additional files" in the file adapter on the directory with parameter:
File List : ref
ref.namePart : ".csv" = "txt"
ref.type : BIN
The name of source file is "Ewad.csv" and the name of source referential file is "Ewad.txt". There are in the same
directory on my outbound NFS system.
In the transaction SXMB_MONI on my XI system, I could see my attached referential file in the Payload on the
inbound message, on the receiver grouping but not on my target NFS system.
I try a simplier scenario (a no mapped source file and a referential source file) and I can see the referential
file on the monitoring transaction on the inbound message, the receiver grouping and the response (on payload) but
not on my NFS target system.
I know I say all.
How can I have my referential additional file on my target directory with the mapped splitted files ?
Anybody have an idea ?

See Camera Raw plug-in | Supported cameras
You need Lightroom 5.2 or later. Which version of Lightroom are you running?

Additional Files in Sender File Adapter

Hi
I have to collect 2 files (IN.txt, IS.txt) and attach 2 files as an attachment to mail.
So I opted Additional Files in Sender File Adapter
Source Directory = D:\usr\sap\pitest\LoadTest\Output\Invoice
File Name = IN.TXT
Additional Files
File List <IS.TXT>
<IS.TXT>.namePart ".TXT"=".TXT"
<IS.TXT>.optional NO
<IS.TXT>.type TXT
But I am able to Pick only one file (IN.TXT) from the Source Directory.
IS.TXT file is not at all picking.
Please give me your suggestion.

I reply just want to close this issue.
if file Name = Item.TXT and additional file name is ItemText.csv then configuration as following.
File List <Item.TXT>
<IS.TXT>.namePart ".TXT"="Text.csv"
<IS.TXT>.optional NO
<IS.TXT>.type TXT
for namePart parameter, we should give the str which need to be replaced. for your example, we could give as <IS.TXT>.namePart "IS.TXT"="IN.TXT"
replace all the file name.

How to handle additional files.

Hi,
In PI we can pick up additional files in the Sender File Adapter.
My scenario would require to pick up invoice1.txt and and invoice1.jpg (the .jpg is the additional file)
I need to get FCC for .txt file, map it, and send it out to R3 with a proxy.
The additional file should go to a share (also on the R3, and then be accessible via a link)
Is this possible?
What configuration is needed to separate the .txt from the .jpg? Would it require BPM?
Any useful pointers/documents on the subject would be appreciated
kr
Robert

Hi,
I know how to configure the sender file adapter to pick up the additional file.
What i am looking for is how to handle it inside the integration engine, because i need to split the message from the additional file.
As mentioned above i need to send the .txt file via proxy to R3 and the .jpg file as is to R3, but it needs to go a share on the R3 directory.
file.txt + file.jpg --> Sender File Adapter --> PI / --> Proxy --> records form the file.txt
\ --> Receiver File Adapter --> .jpg
Thx
Robert

Additional file usage

Hi all,
When we create a orginal application file in a DIR , we can create an additional file with original application file. Such additional file can be template or layout or picture.
I am able to create an addtional file with original application file. How to view this addtional file in DMS?
Also for what purpose we can use this application ?
Thanks,
Hemant

Hi Sham,
i just have the same requirement to make use of Additional file option in CV01N,
the senario is we have Word files *.doc, and inside these Word files have attachment of Excel files,
the Word file is checked in to Server, and the excel file is maintained as Additional File.
but when i open the Word file in SAP i could not open up the Attached Excel file in it.
i have maintained the proper workstation Setting for both *.doc and *.xls file. but still unable to open up the Excel file stored inside Word file.
where am i missing any configuration or any specific note is to applied.
thanks and regards
Kumar

Adobe X Pro - requires additional files to be installed by system administrator...

Error message:
Additional files will need to be installed to create PDF from this file. You must have Administrator privileges to install these files. Please contact your local system administrator.
1) just an 'ole lady here - on a pc - not a system administrator (though I think have admin rights in windows 7).
The details:
a) had a lenovo small format pc running XP - Acrobat X Pro worked fine on this pc, could create pdfs and fillable forms etc.
b) Just bought a used pc with Windows 7 Enterprise - after a week of issues - duh - I realized X Pro was not working on the new(used) pc, except to let me open a pdf, and even add a text box, or sign or line out a change in a pdf. - that is all it will let me do..
c) I had a purchased CD of Adobe Pro Standard. In 2012, I was able to upgrade it to Adobe X Pro 10, while still on XP, with a digital download, for which I have the registration key.
The X Pro version showing this morning was 10.1.12 (before I uninstalled it, and I assume after various updates).
I've also tried repairing the installation - and selecting the function I need PDFMaker (to work with MS Word) -
I have uninstalled Adobe, and re-installed it, from my old downloaded file the version is 10.0.0
Finally read that I should have deactivated it on the old pc.
Called Support, and they gave me an all new, full version (download) of Adobe X Pro at 5 pm est, and a NEW S/N.
I uninstalled, the old version, ran ccleaner, restarted the pc, installed the new X Pro 10.0.0, used the new s/n and still cannot use Adobe.
Still can't, create a pdf, combine files from word or create a form from a word doc - nada. Also, do not seem to have Adobe Reader anywhere on this pc, either (a good thing from what I've read).
When I was on XP I did not have this problem. Now that I am on Windows 7 Enterprise, I have the problem.
(I am using MS Office 2003 and do plan to update to 2010. Using Google Apps for Work, small business working from home, did not like Office 365 since I am on a MiFi hotspot for internet (country living))
Maybe all of this was more information than you'd want or need... just was not sure what is is causing the conflict/problem.
Feeling out of my depth with this and really need some guidance / help / specific steps to take - Thanks in advance for your help!
Linda

Hi Linda,
Please try the steps mentioned below:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

Abobe X Pro needs "additional files to create a pdf..."

Error message:
Additional files will need to be installed to create PDF from this file. You must have Administrator privileges to install these files. Please contact your local system administrator.
1) just an 'ole lady here - on a pc - not a system administrator (though I think have admin rights in windows 7).
The details:
a) had a lenovo small format pc running XP - Acrobat X Pro worked fine on this pc, could create pdfs and fillable forms etc.
b) Just bought a used pc with Windows 7 Enterprise - after a week of issues - duh - I realized X Pro was not working on the new(used) pc, except to let me open a pdf, and even add a text box, or sign or line out a change in a pdf. - that is all it will let me do..
c) I had a purchased CD of Adobe Pro Standard. In 2012, I was able to upgrade it to Adobe X Pro 10, while still on XP, with a digital download, for which I have the registration key.
The X Pro version showing this morning was 10.1.12 (before I uninstalled it, and I assume after various updates).
I've also tried repairing the installation - and selecting the function I need PDFMaker (to work with MS Word) -
I have uninstalled Adobe, and re-installed it, from my old downloaded file the version is 10.0.0
Finally read that I should have deactivated it on the old pc.
Called Support, and they gave me an all new, full version (download) of Adobe X Pro at 5 pm est, and a NEW S/N.
I uninstalled, the old version, ran ccleaner, restarted the pc, installed the new X Pro 10.0.0, used the new s/n and still cannot use Adobe.
Still can't, create a pdf, combine files from word or create a form from a word doc - nada. Also, do not seem to have Adobe Reader anywhere on this pc, either (a good thing from what I've read).
When I was on XP I did not have this problem. Now that I am on Windows 7 Enterprise, I have the problem.
(I am using MS Office 2003 and do plan to update to 2010. Using Google Apps for Work, small business working from home, did not like Office 365 since I am on a MiFi hotspot for internet (country living))
Maybe all of this was more information than you'd want or need... just was not sure what is is causing the conflict/problem.
Feeling out of my depth with this and really need some guidance / help / specific steps to take - Thanks in advance for your help!
Linda

llmaxwell wrote:
Maybe all of this was more information than you'd want or need... just was not sure what is is causing the conflict/problem.
Linda
Actually, it's a breath of fresh air getting all of the info needed to help.
But now the bad news. You're in the forum for Adobe Reader, but you want to post in the Acrobat forum from the sounds of it (many more pro's there for your product).
Here's a link and good luck. Acrobat

Deletting the file that has been used in 'Additional Files' in FILE SENDER

Hi people.
I've developed an interface that has to send a ZIP file to an email address.
I pick that file using a dummy file. This file is picked as an attachment and has been defined in 'additional parameters' of SENDER FILE.
My problem is that i want to delete that 'additional file' once it has been procesed. I think that this could be done running an operating system command.
My problem is that i don't know how to do this in UNIX systems.
Can anyone tell me how to delete (in UNIX) a file with name dummy.zip located in folder /usr/sap.../ ?
Regards,
Inigo

You can probably do this by executing a shell script on the server!
You can only run commands on the PI Server
See here for details and help on writing shell scripts!
http://www.injunea.demon.co.uk/pages/page205.htm

Additional files with source file

Similar Messages

Maybe you are looking for