Additional Internal SDD Drive Possible for X201?

I have an X201 with the 500GB HDD. Is it possible to add an SDD drive internally, in addition to the 500GB HDD?
I don't want to replace to 500GB HDD drive and definitely don't want to reinstall Windows 7 on a SDD.
I do want a faster drive for processing, as in opening and saving, large (500MB-2GB) Photoshop files.  The 8GB of memory is plenty, but the drive access is slow. I'm hoping I can put my Photoshop files on an internal SDD.
btw, I've rejected the option of adding a USB 3.0 Express Card to connect to an external SDD. I think I'll lose too much time going through the USB.
Thanks in advance.

you can plug in a ssd drive into the expresscard, but that is not a bootable device. Other than that not really.
X220 is capable of accepting mSATA SSD and normal SSD, so you can get two drive running.
For X201, you would need a ultrabase x200 if you want to put another drive to the laptop. i.e. put the platter hdd into ultrabay slim slot, and put the ssd into the main hdd slot.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

    After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

    I have a TB internal drive, but this is what it shows for memory slots:
    Memory Slots:
      ECC:    Enabled
    DIMM Riser B/DIMM 1:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser B/DIMM 2:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser A/DIMM 1:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x42076007
    DIMM Riser A/DIMM 2:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x4207631E
    DIMM Riser B/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser B/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

  • T410s with Windows 7 and additional internal Hard Drive with Windows XP. How do I make them work?

    Hi Everybody,
    I have had my T410s for 9 months and I love it. No problems at all. I was a contractor so I could use whatever laptop I wanted. Now I work for a big company that issued me a Thinkpad T410 with Windows XP. Now the T410 model has a huge heavy battery compared to the T410s. An ex-colleague of mine used to have a T60p with 2 internal Hard Drives one with Windows XP and one with Windows 7, and he could boot the computer with the Hard Drive of choice.
    Does anybody know how to do that? I already got the bay and the Windows XP Hard Drive inside the T410s.
    Thank you in advance
    Nicky

    Spoiler (Highlight to read)
    I tried that and I get an error message that says that it detected a possible virus.
    I tried that and I get an error message that says that it detected a possible virus.
    Spoiler (Highlight to read)
    Any other idea?
    Any other idea?

  • Additional Internal Hard Drive

    I'd like to install a second hard drive to a G5, 2 Ghz dual process. The one I'm looking at is a Western Digital Caviar SE 250 GB. The drive will be mainly used for storing video. I haven't purchased an internal hard drive before, so I'm just looking for some reassurance that this drive will work with the computer.

    Check to make sure it is a SATA (Serial ATA) drive.

  • Extra internal hard drive use for all programs in stalled

    who to use internal hard drive for programs install?

    Kind of hard to figure out what you are asking... Let's assume it's, "How do I install applications on my Mac's second internal hard drive?"
    There are two ways applications are installed: Manually and automatically. When you install an application manually, you can just drag it to whatever location you like on whatever volume you like. When an application is installed automatically by an "installer" of some kind, it's going to go, by default, somewhere on the boot volume; most likely in the Applications folder at the root level of the boot volume.
    If you're using a late-2012 Mini, there is the extra complication that if you have both a HDD and an SSD installed internally that the OS will attempt to link them into a single Fusion Drive volume. If that's the case, the two drives are treated as a single volume and the OS handles on which physical drive any particular bit (including applications) is actually stored. So if your two physical drives are a single Fusion Drive volume, just don't worry about it.
    If your two drives are separate volumes, you can boot from either (assuming you have the OS installed on both volumes) and install applications wherever you like. In many cases, it's a simple matter of dragging-and-dropping to copy an application from one volume to another. Some applications will be happy to run from any location on any volume. Others will run from any location on any volume but will need their various supporting files to be present in the proper places on the boot volume; such supporting files are usually installed by an "installer" but sometimes when the application runs for the first time.
    If you need more, or more specific, information, try to form your question in complete sentences and be as clear as you can. Read it back to yourself before pressing the ADD REPLY or SUBMIT buttons to be sure it's something another person will understand.

  • Internal hard drive upgrade for 15" MacBook Pro (2.4 GHz Core 2 Duo) late 2008.

    I need to upgrade my internal hard drive to something larger (it is currently 250 gb). What hard drive will be compatabile? I will really appreciate any help with this.  Thank you!
    Specifications:
    Model Name:
    MacBook Pro
      Model Identifier:
    MacBookPro5,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.4 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    2 GB
      Bus Speed:
    1.07 GHz

    The largest HDD that can be installed in a MBP has a 1 Tb capacity.  I suggest you go to the OWC website and examine the choices available there.  Any of the 2.5" HDDs will work.  They cater specifically to the Mac market and and have an excellent reputation.
    Ciao.

  • How do I add additional internal hard drives to Pavilion h8-1217c running Windows 7 Home Premium

    I am stymied in my effort to utilize two recently wiped and formatted Hitachi Deskstar 500 GB SATA drives I inherited from my previous HP desktop. I have installed them in my aforementioned unit, and find that the BIOS apparently accurately identifies them, but I cannot see them in Windows. Instead, in Disk Management, a disk with twice the capacity is listed, and the system does not allow me to initialize the drives, an apparent step necessary before they can be assigned a drive letter and utilized. Upon selecting to initialize, the Disk Management program of Windows presents an Virtual Disk Manager error message saying "The system cannot find the file specified," a message the specificity of which is slightly wanting. Huh? What system? Windows? The drive? Help? BTW, this particular frustration is well documented among a number of users on the internet. Why has no answer been provided yet?

    Don't know what you mean about a link indicating this is an issue with the HP Pavilion h8-1217c...I posted that it is a general issue with a number of computers, many of them HP, wherein the error message I earlier cited came up. To answer your particular subsequent query, in Storage Options in my BIOS, it states that the SATA Emulation is AHCPI, not IDE...a setting I believe is appropriate in this case, since, as I had stated previously (I often find that I have stated, and clearly, previously) that the two additional drives I have installed in this box are Hitachi Deskstar 500GB SATA drives from a previous HP system. Both drives were wiped and reformatted by a local computer shop that was delighted to charge me $60 for that particular piece of heavy lifting, defending their bill by suggesting they woudl have to update the firmware as a matter of course. Upon getting the drives, they freely confessed that, of course, it was NOT necessary to upgrade firmware. I di-grease! To reiterate, both drives are recognized by the BIOS, with their appropriate ser no listed. It is in Windows 7 where the problem seems to crop up. Of course, as a Windows 7 issue, HP is supposed to support it. An earlier post in this forum...a reply to me...gave me a link to instructions on how to disengage the cage that holds the drives. I have, indicated by my posts, moved WELL beyond that point. Is anyone familiar with my issue...again, it is this...with the above stated conditions, when in Disk Management in Windows, with the drives recognized in Device Manager as one drive listed as "Volume_000," I am faced with an immediate pop up box telling me to initialize the drive, either as MBR or GPT. I chose MBR, though it matters not which I choose, since upon clicking OK, another popup box identified as "Virtual Disk Manager" tells me that "The system cannot find the file specified."
    This delightful cul de sac is frequently cited on the internet, with no clear answer as to a resolution anywhere that I could find. Can someone help with this. This ought not to be so difficult, nor should HP be sending me around the bend, making ludicrous statements like "you should not be adding internal drives to your computer" or "we cannot cover this issue unless you pay a fee!" A FEE!! I just bought this system within the last three months. I have purchased several desktop and laptop systems and their accessories from this computer giant in the last 7 years! Do they give a flying-you-know-what about their customers?

  • Best Internal Hard Drive Update for Macbook Pro 13" early 2011?

    Hey everyone,
    I was just wondering if anyone could give me their opinon as to what might be the best hard drive to update on for a Macbook Pro 13" early 2011 model. My budget is about $100, and i'm looking to increase the size of my current hard drive (which is a 320gb hard drive). I know that SSD are out of my budget range as anything even reasonably priced only gives me about 200+ gb of memory. I'm wondering if anyone has had any particular experience with the Seagate 1TB solid state hybrid drive (found here: http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ). It boasts SSD-like speeds at a fraction of the cost, and its right around my budget, but perhaps its too good to be true? I saw the other thread about this hard drive question, but it didn't seem like anyone had any personal experience with it.
    Anyways, just wondering if this one here is a truly a good deal, or if anyone has any better suggestions? Thanks in advance!!!
    ********P.S. Just as a side note, I'm wanting to increase the storage on my computer because i'm wanting to use bootcamp to install windows, and I want an ample amount of space to store movies, games, pictures and music. Not sure if this is even relevant, but i'm wanting to start doing a little bit of beginners programming stuff, so i want to make sure that i'll have enough empty space on my hard drive to do whatever it is i need to do. As it is, I've got about 62gb in movies, 81gb in photos, 41gb in music and 14gb in apps.....I'm really pushing the limits of my storage......*****************

    rchu89 wrote:
    I'm wondering if anyone has had any particular experience with the Seagate 1TB solid state hybrid drive (found here: http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ). It boasts SSD-like speeds at a fraction of the cost, and its right around my budget, but perhaps its too good to be true?
    I have two of those Seagate SSHDs, using one as the internal drive in my primary MBP.  Boot and shutoff times are dramatically less than before (using 7200 rpm HGST HDDs).  In other respects, I have no complaints regarding the drive performance.  I can recommend them based on my limited experience (~3 months).  The $99 price does look very attractive.
    Note that when you install a HDD of larger capacity in a MBP, it should be reflected in your backup strategy.  Do you have a backup drive to accommodate the additional data that you will be able to store on the new internal HDD?
    Ciao.

  • Best additional internal ata drive Hitachi or Seagate

    Hi,
    Can anyone recommend a good 250gb ATA internal drive for 1.25ghz powermac (mirror door)? An important fact is it needs to be quiet, as my mac is noisy enough as it is!! Have looked at the Hitachi Deskstar T7K500 and T7K250 anyone got these?
    Thanks in advance

    My MDD has two Western Digital Caviar 250G drives and I like them very much. Can't hear them at all over the rest of the MDD racket. Watch the Sunday ads--Staples puts these on sale rather often, and sometimes you can get the 320G version for the same price as the 250. I paid US$80/ea for mine a year ago but I've seen the 320G for less than that lately.
    Remember to get the PATA version unless you've added an SATA controller card.
    A

  • Add additional internal hard drive to thinkpad z61m

    does anyone know if it is possible to add an additonal hard drive to the thinkpad z61m?
    if so, can you give me the link to the hard drive and whatever else i would need?
    thank you
    cg

    The cd drive you have resides in a ultrabay enhanced bay, which is also compatible with the ultrabay slim devices, you would need the ultrabay slim caddy to install the hdd. 
    http://shopap.lenovo.com/SEUILibrary/controller/e/auweb/LenovoPortal/en_AU/catalog.workflow:item.det...
    this is the part you need.
    Yes it will work in your machine.  
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • What internal hard drive should I get for a 2007 Mac Pro?

    Hello, I have a 2007 Mac Pro in which I would like to install two additional internal hard drives. I want to use one to run Time Machine and I want to use the other as an archive for my photos. What is the best internal hard drive to get for these purposes? Thanks for any help.

    System:
    SSD: Samsung 840 128GB
    http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
    Icy Dock $15
    http://www.amazon.com/2-5-3-5-Ssd-sata-Convert/dp/B002Z2QDNE/
    Sonnet Tempo Pro
    http://www.sonnettech.com/product/tempossdpro.html
    http://eshop.macsales.com/item/Sonnet%20Technologies/TSATA6SSDE/
    WD Black 1TB $85
    http://www.amazon.com/Western-Digital-Caviar-Internal-Desktop/dp/B0036Q7MV0/
    WD 3TB  $225
    Western Digital 3TB WD Black SATA III 7200 RPM 64 MB Cache Desktop Hard Drive WD3001FAEX
    http://www.amazon.com/gp/product/B00B2UWTHE/

  • Installing internal hard drive on an old iMac

    I am an absolute novice when it comes to taking apart a computer and know nothing about any technical terms or parts. I was able to install a new battery when the original died, so when the "genius" at the Apple Store said I could install an additional internal hard drive, I gave it a whirl. Before I try to return the hard drive, I thought I would give this a shot.
    My iMac is a 400 MHz PowerPC G3, one of the early generations, if the not the first (see-through cobalt blue exterier). I am running with 256 MB of memory and the CPU type is PowerPC 750 (83.0). I have Mac OS X Tiger, version 10.4.6 and this machine had been working great until we recently purchased our first iPod. Now with all the music being loaded in iTunes, the iMac has slowed down and even frozen when trying to use a few applications at once.
    I figured I needed more hard drive space and/or memory and the people at the Apple store suggested I purchase a Seagate 80 GB Barracuda and install it myself.
    Well, I got the computer apart and found the old hard drive, but that is about as far as I can go. I read about making the new hard drive the "slave" hooking up the BLUE, BLACK and GRAY connectors on the new cable, but I don't know a motherboard from a jumpdrive and the new connectors do not match up with the old one (the Blue connector is not the same size as the old one that I think was going into the motherboard). There is also something about an unused power cable in the old computer for the new hard drive, (which I did not see) and a suggestion that I get a Y-shaped power cable from an electronics store, which even if I knew what it was, I would not know where to begin connecting it. Not only does the new connector not match up, it is about 10 times as long as the old one, which leads me to the final issue: if I could get this all hooked up and power-supplied, where in the world would I put the new, additional hard drive? There is no room I can see adjacent to the current hard drive. Do I have to take the thing further apart?
    I realize this may provide a great laugh for anyone who knows how all this works. If trying to walk someone through this process using Apple Discussions does not make sense, I completely understand. I had nothing to lose (except possibly the cost of the Seagate drive if they won't take it back).
    I was able to put everything back together after taking the old hard drive out, so I think I could do this if the parts were all there and matched up....but I would still need to know where to put the new drive!
    Any suggestions are appreciated. I have already resigned myself to the fact I may just need a more expensive external drive...I just have few available ports.
    Thanks,
    Conrad Farner

    "...when the "genius" at the Apple Store said I could install an additional internal hard drive, I gave it a whirl... if I could get this all hooked up and power-supplied, where in the world would I put the new, additional hard drive?"
    Your iMac has room for one hard drive and the optical drive (CD-ROM, DVD-ROM, CD-RW, etc.). Any ribbon cable supplied with the hard drive or a Y-splitter power cable is of no use in the iMac. The new drive must replace the original, because the two can't coexist internally. Additionally, you need to configure the new Seagate as "master," since the optical drive is "slave." Refer to Seagate's accompanying documentation, for instructions on setting the small jumper(s) to designate the drive as "master." The drive may have been factory-configured for "cable select," which isn't supported in your iMac. After you get that straightened out, you'll need to boot the computer from the Tiger installer CD and use "Disk Utility" to format the new drive as a Mac OS Extended (HFS+) volume. You may also want to partition it as well.
    Incidentally, you should post any future questions about your iMac in the Forum dedicated to the CRT-style iMacs. You'll receive informative answers to any questions that you might have, from those who are thoroughly familiar with your model iMac.

  • HT4718 Follow the instructions in "Installing Lion on an external storage device" also if you are REPLACING an internal hard drive.

    Even though you are using Internet "Recovery", the program will not format your hard disk for you. In fact, once you get to the recovery screen, it will show no hard drive is even available, which at first caused me to believe I had been delivered a dead on arrival hard drive. Instead, exit the Recovery program and enter the Disk Utility program and partition your new, uprade hard drive as apple instructed for an "external" hard driver. After that just proceed with the Recovery program.

    "...when the "genius" at the Apple Store said I could install an additional internal hard drive, I gave it a whirl... if I could get this all hooked up and power-supplied, where in the world would I put the new, additional hard drive?"
    Your iMac has room for one hard drive and the optical drive (CD-ROM, DVD-ROM, CD-RW, etc.). Any ribbon cable supplied with the hard drive or a Y-splitter power cable is of no use in the iMac. The new drive must replace the original, because the two can't coexist internally. Additionally, you need to configure the new Seagate as "master," since the optical drive is "slave." Refer to Seagate's accompanying documentation, for instructions on setting the small jumper(s) to designate the drive as "master." The drive may have been factory-configured for "cable select," which isn't supported in your iMac. After you get that straightened out, you'll need to boot the computer from the Tiger installer CD and use "Disk Utility" to format the new drive as a Mac OS Extended (HFS+) volume. You may also want to partition it as well.
    Incidentally, you should post any future questions about your iMac in the Forum dedicated to the CRT-style iMacs. You'll receive informative answers to any questions that you might have, from those who are thoroughly familiar with your model iMac.

  • What internal hard drive can I get with 2007 Mac Pro?

    Hello,
    I own a Mac Pro that I purchased sometime Early 2007 and I want to add an additional internal hard drive. I am a little confused as to what my options are after visiting the Apple online store. It seems they do not have a choice for 1 TB drives for my machine. I do know that my current drive is a Seagate Barracuda 7200.10 SATA 3.0Gb/s (SATA II) 500-GB (16 MB cache buffer) Hard Drive.
    I was wondering if I could add a 1 TB drive or do I need to stay with 500 GB size drive? Also, do I need to stick with 16 MB cache buffer or could I go with the 32 MB cache buffer size? If anyone has any recommendations, please let me know. Normally, I would just think I could get any drive that uses a SATA II standard.
    Thank you,
    Leapstepman
    Hardware Overview:
    Model Name: Mac Pro
    Model Identifier: MacPro2,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 8 MB
    Memory: 4 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP21.007F.B06
    SMC Version: 1.15f3
    System Version: Mac OS X 10.5.6 (9G55)

    I would still steer clear of Seagate, and WD drives are doing well across the board - Mac Pro and PCs.
    Any SATA drive today is fine. SSD, 10K VelociRaptor, WD Green 1TB, Black Caviar... choice is yours.
    http://www.xbitlabs.com/articles/storage/display/1tb-14hdd-roundup.html
    http://www.thetechlounge.com/article/597-2/1TB-Hard-Drive-Roundup-Update/
    http://www.barefeats.com/hard112.html

  • Can I install an internal hard drive in i-mac intel 17" ?

    Where can I get an internal hard drive compatible for intel i-mac? I need a larger hard drive, like 250gb or something. Can I install it myself?

    You can go to a apple service center like CompUSA and have them install one for you. If you buy the drive from them, they will install it for free, otherwise it is like a 40 dollar charge. DO NOT attempt to install it yourself, not only will you void your warranty, the intel iMac is very difficult to open and work on and you will probably break something.
    Glor

Maybe you are looking for

  • Missing Sounds in Logic 8

    Very peculiar happenings in the world of Logic today. Sounds which were there before have stopped working, or playing different sounds. e.g. Strings play piano. I haven't mucked with anything - it sounds to me like preferences or library issues? Is t

  • Removing filter for ALV grid

    Hi friends I am using an ALV grid to display my data. Once i used the filter in grid to filter some datas and go back to selection screen & executed the report again, the filter is still active and not showing all datas. How to avoid this. Regards Sa

  • Why oc4j allows to use File IOs and manage thread in EJB?

    I don't understand why Oc4j 9.0.2 allows to use File IO and create thread in EJBs? These things should be denied in its implemenation.

  • Unable to Post Depreciation AFAB

    Dear All, While posting depreciation for the current period am getting the following error: Last posting run terminated (Restart in period 2009 010)     Message no. AA730 Diagnosis     The last posting run in period 010 2009 was terminated by an erro

  • HT5935 Does any one have problem in FaceTime after updating to iOS 7

    Does any one have problem in FaceTime after updating to iOS 7