Additional License attracts 20% MSSQL server license. How authentic is this from SAP

Hi,
Can anyone give details of the process of getting new licenses for a running SAP B1 client? We are trying to get new licenses but our local partner demands that we need to pay additional cost for the 3 new licenses aside the license cost for limited user which is 937.50 euros.
Please I have been saddled with the responsibility to see the genuity of the cost for MSSQL server which the partner claimed is additional 20% of license cost. If this is so my company may turn down the purchase as it took me alot to get them to signoff the additional license cost,
Please I need this information to enable me advise them or to interact with the partner as I would not want them to loose interest on the application.
Thank you.

Hi,
The forum is not a space to discuss non-technical issue. Please understand SAP can not give the same discount rate without condition. You may only get packaged price by certain quantity.
Please close your thread.
Thanks,
Gordon

Similar Messages

  • HT4929 I have (or had?) 2 alias  I followed the instructions to go from MobileMe to iCloud. But the alias stayed on MobileMe server (?) How to get this to iCloud?

    I have (or had?) 2 alias My main account is on iCloud. I followed the instructions to go from MobileMe to iCloud. But the alias stayed on MobileMe server (?) How to get this to iCloud? Not possible to put them into icloud as alias. How to keep  it working?HELP HELP because people sending me things to this email and since today no excess any more to the mobile me server? And how to move this?????
    <Emails Edited by Host>

    Firstly, I note that your profile states that you are using OS X 10.5.8, in order to use iCloud on your computer you need OS X 10.7.2 or better.
    Secondly, I have asked for your email address to be edited out. Post your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.
    Finally, are you sure that these additional addresses are aliases and not sub accounts on a family pack, aliases from MobileMe should transfer to an iCloud when you migrate.

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to Pull data from sap r/3 tables to oracle tables

    how to fetch data from sap r/3 tables & data pulled to oracle table .
    GIVE THE APPROPRITE ANSWER FOR THIS.
    THANKS IN ADVANCE.
    If it is useful for me , i am giving point.
    regards ,
    Navita
    Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
    Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

    You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
    Basis team will help you to have connection.
    Check the connection name in the table DBCON.
    Check the below code to handle native SQL.
      SELECT SINGLE  DBMS
               FROM  DBCON
               INTO  DBTYPE
               WHERE CON_NAME = DBS.
      IF DBTYPE = 'ORA'.
        TRY.
          EXEC SQL.
            CONNECT TO :dbs
          ENDEXEC.
    ERROR Handling for Native SQL *************
          IF SY-SUBRC <> 0.
            MESSAGE `Docusphere connection failed.` TYPE 'I'.
            EXIT.
          ENDIF.
      EXEC SQL PERFORMING loop_output.
        OPEN C1 FOR
        SELECT  UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
        FROM IIS_DOCS_AP10D
        WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
        UK19 = 'E'                                           AND
        UK20 IS NULL
      ENDEXEC.
          DO.
            CLEAR W_OUTPUT.
            EXEC SQL.
              FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
            ENDEXEC.
    enddo.
    Reward points if helpful.................

  • How to do this in SAP SD

    Companies
    1. TATA
    2. Godrej
    A customer went to godrej web site or called and ordered a refrigirator. wat godrej do here is send that order to TATA .
    TATA going to deliver the order to customer. and also TATA going to invoice the customer on behalf of Godrej. means invoice shows godrej logo and customer name and payment information.
    when customer see the invoice he feels like the invoice and order(refrigirator) camefrom directly from Godrej.
    But Invoice and order delivering done by TATA. and TATA also collects the Payments.
    TATA and Godrej look their books quarterly basis.
    TATA giving services like this.
    This is only example.this is happening in real time in other companies.
    Please find me a solution
    How to do this in SAP SD.

    HI,
    You can use Third Party process as pointed out by Srinivas.
    Blewo are the links that will help you in 3rd party process...
    http://help.sap.com/saphelp_46c/helpdata/en/e6/4a78e39e0311d189b70000e829fbbd/content.htm
    http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
    let us know.
    Regards,
    SB

  • HOW to retrive data from SAP Tabel

    Hi Friends,
       1)Can you please explain how to retrive data from SAP table(example AFRU).
       2) we had requriment based on the qunatity , Product name and date we need to display KPI's .KPI is based no products manfactured per day with some conditions
    Regards
    Srikanth

    Hi Udayan,
        I want to retrive SAP Table data from xMII.can you please explain elabarately how to call "RFC_READ_TABLE" from xMII.
    please do the needful
    Thanks
    Srikanth

  • Using SQL Server 2012 SSIS to Extract Data From SAP

    Hi
    What is the current best practice for using SQL Server 2012 SSIS to extract data from SAP R3? Please note we are looking for a solution that does not use SAP BW or SAP OHS.
    Ideally we would like to build our ETL SSIS process to make a .NET call to an SAP RFC procedure and avoid using web services.
    With SS2012 can we use any of these without using SAP BW:
    - SAP .NET Connector
    - MS ADO .NET
    - BizTalk .NET 3.0 Adapter
    Thanks and take care,
    Shayne

    Hi Shayne,
    You can use the .NET Framework Data Provider for mySAP Business Suite along with SQL Server Integration Service (SSIS) to import data from an SAP system into SQL Server database tables, flat files, or other compatible destination types. You can create an SSIS
    package that can be executed to import data from an SAP system.
    You must use the SQL Server Import and Export wizard to import data into the SQL Server database. You must provide a select query to specify data to be imported. The query must confirm to the semantics supported by the Data Provider for SAP. You can start the
    SQL Server Import Export Wizard either from the SQL Server Management Studio or from an Integration Service project in Visual Studio. Detail steps please see:
    Importing SAP Data Using SQL Server Management Studio:
    http://msdn.microsoft.com/en-us/library/cc185161(v=bts.10).aspx
    Importing SAP Data Using Visual Studio:
    http://msdn.microsoft.com/en-us/library/cc185254(v=bts.10).aspx
    Please feel free to ask if you have any question.
    Thanks,
    Eileen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

  • How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

    Hi,
        How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

    hi
    good
    both works not possible simultaneously.
    If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
    thanks
    mrutyun^

  • Anyone having the letter n pop up in Address Book Notes?  Anyone able to tell me how to keep this from happening?

    Anyone having the letter n pop up in Address Book Notes?  Anyone able to tell me how to keep this from happening?

    You can upgrade to Mavericks free, just run the App Store program and search for Mavericks. But before you do upgrade I recommend the following:
    1) make sure you have a recent backup. TimeMachine is fine.
    2) Mavericks is somewhat more memory hungry than 10.7 was. You will need 4 GB of RAM and I strongly recommend 8 GB.
    Go back to the Apple menu and select About this Mac - look under the OS info you just looked at. You'll see how much RAM your computer has now. Then click on the More Info button. There you will see your computer info listed as in: iMac, 21.5" mid 2010, for example. Return back with that information and we can tell you how far the computer can be upgraded.
    If you decide to procede and you have enough RAM upgrading to Mavericks is quite simple. Click on the download button and let it do its job.

  • When send email with emoticons to a pc user, emoticons show as an empty box. Also, email content has a symbol on every line. How to stop this from happening?

    When send email with emoticons to a pc user, emoticons show as an empty box. Also, email content has a > symbol on every line. How to stop this from happening?

    Dear Mr. Toad (my all-time favorite ride at Disneyland ;-) ..
    Thanks so much for your detailed reply.. my netbook is in the bedroom, turned off.. I (so far) only use it in the evening, in the bedroom.. I've saved your response, and will try your suggestions, and let you know if they solve the problem I described. I really appreciate you taking the time to post such a detailed reply..
    I can't answer your Thunderbird "configuration" questions, because I'm in the living room, using the crap Vista laptop, on which I plan to install Thunderbird, and then take Windoze Mail out in the street and drive over it a few times.. I'll get back to you one way or the other, and let you know if your instructions solved the problem, or not..
    I don't understand why Thunderbird "out of the box", so to speak, simply doesn't forward HTML emails with embedded graphics, (like Outlook Excess, and Winblows Mail do).. without having to go through those steps. I personally HATE HTML email, but over the years, it's become more and more prevelant.. so it's a problem I must fix..
    Thanks again..
    Harv..

  • How to send SMS from SAP to Any mobile

    Hi Friends,
    I have a requrement. How to send SMS from SAP to Any mobile?? For Example: If i created PO in SAP then i want to send a SMS to Concerned Vendor and HOD.
    Please provide the pre-requisites?
    Naveen

    Hi Naveen,
    there is a standard webservice globally available called Send SMS and you can consume that webservice with the help of CAF and you can send PO number as SMS, If the standard webservice do not work then you have to create your own webservice to fulfill the functionality.
    Regards
    Manohar

  • Server.policy how to solve this problem of permission

    I had deployed a adf faces application.
    I think adf framework build images, and javascritps at cache....
    then my page appear like this:
    http://img113.imageshack.us/img113/7519/adferror9lb.jpg
    the erros at log of SunApplicationServer of this issue is this:
    http://img115.imageshack.us/img115/3169/imagem1lm.jpg
    my server.policy is equal this:
    server.policy
    // Copyright 2004-2005 Sun Microsystems, Inc.  All rights reserved.
    // Use is subject to license terms.
    /* Copyright 2004 Sun Microsystems, Inc. All rights reserved.     */
    /* SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms. */
    // Core server classes get all permissions by default
    grant codeBase "file:${com.sun.aas.installRoot}/lib/-" {
         permission java.security.AllPermission;
    // lockhart classes get all permissions by default
    grant codeBase "file:${com.sun.aas.webconsoleLib}/cc.jar" {
            permission java.security.AllPermission;
    // jato classes get all permissions by default
    grant codeBase "file:${com.sun.aas.jatoRoot}/jato.jar" {
            permission java.security.AllPermission;
    // iMQ classes get all permissions by default
    grant codeBase "file:${com.sun.aas.imqLib}/-" {
         permission java.security.AllPermission;
    // ANT classes get all permissions by default
    grant codeBase "file:${com.sun.aas.antLib}/-" {
         permission java.security.AllPermission;
    // Pointbase embedded server classes get all permissions by default
    grant codeBase "file:${com.sun.aas.pointbaseRoot}/lib/-" {
         permission java.security.AllPermission;
    // Web Services classes get all permissions by default
    grant codeBase "file:${com.sun.aas.webServicesLib}/-" {
         permission java.security.AllPermission;
    // permissions for avkit classes
    grant codeBase "file:${j2ee.appverification.home}/lib/-" {
        permission java.security.AllPermission;
    // Basic set of required permissions granted to all remaining code
    grant {
         permission java.lang.RuntimePermission  "loadLibrary.*";
         permission java.lang.RuntimePermission  "queuePrintJob";
         permission java.net.SocketPermission    "*", "connect";
         permission java.io.FilePermission       "<<ALL FILES>>", "read, write, delete";
            // work-around for pointbase bug 4864405     
            permission java.io.FilePermission "${com.sun.aas.instanceRoot}${/}lib${/}databases${/}-", "delete";
            permission java.io.FilePermission "${java.io.tmpdir}${/}-", "delete";
         permission java.util.PropertyPermission "*", "read";
         permission java.lang.RuntimePermission     "modifyThreadGroup";
    // Following grant block is only required by Connectors. If Connectors
    // are not in use the recommendation is to remove this grant.
    grant {
            permission javax.security.auth.PrivateCredentialPermission "javax.resource.spi.security.PasswordCredential * \"*\"","read";
    // Following grant block is only required for Reflection. If Reflection
    // is not in use the recommendation is to remove this section.
    grant {
         permission java.lang.RuntimePermission "accessDeclaredMembers";
    // Permissions to invoke CORBA objects in server
    grant {
        permission com.sun.enterprise.security.CORBAObjectPermission "*", "*";
    };

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

  • How to transfer file from sap server to PDM server using open FT??

    Hello Sap Guru's
    I want to Trasfer a file with all supplier information from SAP server to PDM server(Thirdparty) system Using Open FT ..How can I transfer ???
    Please let me know the answer??
    Thanks In Advance
    Preethi

    Hi Preethi,
    I think it is not possible to transfer a file from SAP to PDM using open FT.
    Using RFCs, we can do the transfer.
    Other option is the file can be downloaded into UNIX. And from there using a shellscript we can transfer the file from UNIX to PDM or if your PDM has the option to grab the file from UNIX that will also work.
    Hope this helps.
    Please reward if helpful.
    Thanks,
    Srinivas

  • How to file data from sap server to third party-tibco using EDI-Idoc?

    Hi all,
    I need to send data from sap server to third party system in th form of file.
    Please guide me how to send data file from sap server to third party-tibco using edi-idoc?
    Also guide the configuration ti be done for EDI.
    Thank you.

    1)create file port
    2)TCP-IP RFC destination with a program RFCEXEC to be executed on application server
    3)Dummy distribution model
    4)Partner pofile of type other han LS

  • How to Access data from SAP Content Server through SAP Portal

    Hi Experts,
    I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
    I am trying to use this URL into the CMS address but it is not working
    http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
    Is there any other procedure for acceesing the DATA  from SAP content server. ?
    Thanks,
    Ahmad

    If your Content Server is being used by DMS, then you can use the DMS Connector for KM.  This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM.  For more info see this:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
    Andrew

Maybe you are looking for