Additional Node License for existing cluster

Hi,
I am having two MCS servers having call manager version 8.5 installed in a single cluster. Now I have bought one new MCS server with the same version call manager and I want to add this node in the same cluster but I am having only two node license installed in my call manager cluster and that is already being used.
Please help me how can I can get the license to add this additional node in the cluster. If I have to order something then please share the part code which I have to order.
Thanks,
Shaheen Sidana

Nodes are free with version 8.5, however you need to order the free part number and receive a PAK, contact your Cisco reseller to submit the order or you can try sending and email to [email protected] to see if they can assist.
HTH,
Chris

Similar Messages

  • Cannot perform add node procedure for non-cluster Oracle homes

    After deleting one of nodes,tried to reinstall the node by addNode.sh.
    Got this error in Installer Window "*Cannot perform add node procedure for non-cluster Oracle homes*"
    Any idea?

    what is your oracle version and operating system name and version?
    check the output of cluvfy.sh
    runcluvfy.sh stage -pre crsinst -n node1,node2,.... -verbose
    refer the link:-
    http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/adddelunix.htm#CEGBACAH

  • Addon 9.x licenses for existing deployment

    Can anyone please throw some light on Addon licenses that we need to pick for existing deployment.
    Scenario: I want to migrate 1000 DLU's to 9.x for which i will pick 'LIC-CUCM-9X-ENH-B' under R-UCL-UCM-LIC-K9 bundle and I need additional 300 enhanced plus users. Do I need to pick the same bundle twice - since Cisco does not allow me to select both migration skus and addon skus under the bundle 'R-UCL-UCM-LIC-K9' at one instance.
    I remember earlier we had 'CUCM-USR-LIC-ADD' bundle for 8.5/8.6 where we can select addon users - do we have any such bundle for 9.x.

    Hiya,
    You should indeed use the R-UCL-UCM-LIC-K9 code again for the add-on users. Below BoM for 10 addtional users based on UCL enhanced.
    1         R-UCL-UCM-LIC-K9                        1
              Top Level SKU For 9.x/10.x User License - eDelivery
    2         LIC-CUCM-9X-ENH-A                       10
              UC Manager-9.x Enhanced Single User-Under 1K
    3         CON-ESW-LICCENHA                        10
              ESSENTIAL SW UC Manager-9.x Enhanced Single User-Unde
    4         UCSS-U-UCM-A-3-1                        10
              UC Manager UCSS - 1 ENH User 3 Year Sub Tier A
    5         CUCM-VERS-9.X                           1
              CUCM  Software Version 9.X
    6         PC-10X-STANDARD-K9                      1
              Prime Collaboration Standard 10.x
    7         LIC-CUCM-9X-ENH                         10
              UC Manager Enhanced 9.x License
    8         UCM-PAK                                 1
              UCM 9X PAK
    9         CON-ESW-RUCLUCK9                        1
              ESSENTIAL SW Top Level SKU For 9.

  • Licensing for NT Cluster Server

    I need to know what the licensing method is for a NT Cluster Server? One server is connected to the database and the other is in hot standby. Only the active server can connect to the database, unless it goes down, then the standby server will take over and connect. I would like to use Oracle standard edition, because the active server has only 4 processors. The standby server has 2 processors. There seems to be some confusion as to the number of processors for this system. Some in our group say that the total number of processors is 6, thus we must use Oracle Enterprise Edition. I say we have two separate computers, one with 4 processors one with 2 processors, and we need Oracle Standard Edition for both computers. Can anyone help me settle this arguement, with documentation?

    Thanks for the responses.
    The most I've been able to find out is that there is no licensing charge for the NW J2EE AS if you use it to  support Bobj.
    Not sure though if the same applies for an application other than Bobj.
    Regards,
    Peter

  • Install additional application server for existing CE7.11 system

    Hello Gurus,
    We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
    Now, we need to install an additional application server (dialog instance) for the same system.
    I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
    Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
    Basically, what else should I do after the installation of the app server is completed?
    Thanks and Regards,
    Shitij

    Question got repeated by mistake.

  • Install additional application server for existing CE 7.11 system

    Hello Gurus,
    We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
    Now, we need to install an additional application server (dialog instance) for the same system.
    I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
    Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
    Basically, what else should I do after the installation of the app server is completed?
    Thanks and Regards,
    Shitij

    Question got repeated by mistake.

  • Need CUBE license for Existing 3945 GW Router ?

    Hi
    I already have a 3945 Router that have purchased long back
    Now we are planning for a SIP TRUNK to Service provider ( PSTN).
    We have UC License.
    As we have not purchased CUBE license earlier with router , I would like to know
    if its available to Purchase CUBE License and Session License
    as spare ? if its Right to Use license..how to purchase and inegrate it with existing 3945 Router ?
    ==============================================================

    It is a paper license. You need to contact you cisco reseller to purchase it.

  • Licensing For SQL Cluster

    Hi,
    I would like to setup a SQL server failover Cluster as described as URL below.
    http://msdn.microsoft.com/en-us/library/hh231721.aspx
    Understand that there will be 2 servers and shared storage are required.My question is do I need to 2 SQL Server license with CALs or just 1 SQL server license and CALs is enough for my condition? Because I heard that if the SQL is setting up as  failover
    cluster for any kind of SQL Server database work,there's no need to license the redundant hardware,So would like to confirm for it.
    Thank you and looking forward for reply. ^^

    Hello,
    This is a community forum for technical questions & issues.
    For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
    Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
    http://www.microsoft.com/en-us/server-cloud/products/sql-server/buy.aspx
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • CUCM 9.0 nod license

    Hi,
    Since some of 8.x versions there is no need to buy nod license for each additional node in cluster. But it's still need to be ordered even with 0$ price. Is there same trouble in 9 version or that trouble was definately solved with it's new ELM?
    Thank you

    Hi ,
    Not clear on this , do we need to order node licenses for CUCM 9.0  as well ?
    how many nodes are by default supported by CUCM 9.0 with out a specific node licenses ?
    regards
    PW

  • Independent developer needs dev license for BW

    Hello.  What are the steps for an independent developer to get a non-trial license of BW for development purposes?
    Thanks,
    Tim

    Here is the "License FAQ" for the Connector. The PDK might have a different license.
    1. Do I need a developer license for the SAP connector for Microsoft .NET?
    Developer licenses are always required when SAP development tools and functionality are being used for development.
    2. We already use ABAP for development. Do we need additional licenses to use the SAP connector for Microsoft .NET?
    If you have existing developer licenses these named persons already have the required license to develop solutions based on the SAP connector for Microsoft .NET. If additional persons want to develop based on the SAP connector for Microsoft .NET, you will have to acquire additional developers licenses for them. In any case, all customers can download the SAP connector for Microsoft .NET from the SAP Service Marketplace under the Quick Link “Connectors”.
    3. How can I purchase developer licenses for the SAP connector for Microsoft .NET?
    To obtain the necessary license please contact your local SAP office.
    4. Do I need a runtime license for running an application that uses the SAP connector for Microsoft .NET?
    The runtime does not require any immediate license fees. However, please note that each user accessing application functionality through the SAP connector for Microsoft .NET is required to be licensed under a respective solution or component license.

  • License for Oracle business intelligence EE

    Hi,
    I'd like to know how many OBIEE user licenses(NUP) do I have to get following our server environment. We'll have 50 real OBIEE users on this system.
    We're gonna have three web servers(IIS) and one new server for OBIEE. Actually I'd like to run OBIEE with http server on a server, but our web system security policy point of view, I have to separate http server functions from an OBIEE server physically. I understand if OBIEE program will be working on a server with http server functions, it enough to get minimum OBIEE user licenses(50NUP) for using it.
    My question is if I'll separate some http server functions from the OBIEE server, do I have to purchase additional OBIEE licenses for the http servers? I know that if I'll separate the functions from the OBIEE server, I have to put some ISAPI components for OBIEE on the IIS servers for connecting to the OBIEE server.
    Thanks

    Hi
    As far as I know, if you separate the HTTP server away from the BI Server you do not need additional licenses. I believe this is only a configuration issue. However, you should ask your Oracle sales rep as they will have the most up to date information.
    I have a feeling that the named user minimum is per processor so you'll have to work out how many processors there will be in the final environment and multiply 50 by $1500 (the cost of a single user) by the number of CPUs.
    Thus, if you end up with a 4 CPU machine, or 2 x 2 CPU machines, the cost will be 4 x 1500 x 50 = $300,000. The same on a processor based license would be $900,000 (4 x $225,000), so until you have 150 users or more you will be better off going down the NUP route..
    I hope you have plenty of money.
    Best wishes
    Michael

  • DB licensing for OrPOS

    Do you need to acquire separate DB licenses for the database used in the store or is this already covered in the per-POS license? If you are using Data-Guard to replicate the DB to a cold-standby machine, do you need additional DB license for the standby DB server?

    Yes, you need to buy license separately for Oracle DB and it is not covered in the POS license. Not sure about the licensing of db replication. You need to check with the Oracle support.

  • Need for an aditional enterprise oracle license in a cluster

    Hello,
    I would like to know about the oracle licensing (*enterprise 11g*) of the following structure:
    # Cluster of an active-passive operating system with only one active server. The secondary node will take over the services only in case of failure of the primary.
    # A secondary data center with one more node of the cluster and with data replication from the primary storage.
    I know that for the cluster will require the licensing of only one server.
    I wonder about the need for one more Oracle license for the second mentioned structure, where the passive server would only be used in case of failure of the cluster.
    Thanks in advance!

    You really, really, really want to have this conversation with Oracle Sales. Nothing anyone says here is in any way authoritative-- if there is ever an audit, you really don't want to explain that some guy on the internet with a playing card logo next to his name said it was OK. The answer may depend on the country you're in, your existing license agreements, your ability to negotiate with Oracle, your desire to buy other Oracle products, how much your sales rep likes you, the phase of the moon, how close your rep is to making their quota, your astrological symbol, and dozens of other factors. In other words, any answer would need to be taken with a few hundred grains of salt.
    You'll want to refer to the Software Investment Guide, specifically the Backup/Failover/Standby/Remote Mirroring section. In general, you can have one failover node so long as you do not fail over for more than 10 calendar days per year and immediately go back to the primary once it is repaired. In general, you would need to fully license the failover data center. But, as I said, this is all subject to negotiation.
    Justin

  • Can I change which nic is used for a cluster network when more than one nic on the node is on same subnet?

    This cluster has been up and working for maybe a year and a half the way it is.  There are two nodes, running Server 2012.  In addition to a couple network interfaces devoted to VM traffic each node has:
    Management Interface: 192.168.1.0/24
    iSCSI Interface: 192.168.1.0/24
    Internal Cluster Interface: 192.168.99.0/24
    The iSCSI interfaces have to be on same subnet as management interfaces due to limitations in the shared storage.  Basically if I segregate it I wouldn't be able access the shared storage itself for any kind of management or maintenance tasks. 
    I have restricted the iSCSI traffic to only use the one interface on each cluster node but I noticed that one of the cluster networks is connecting the management interface on one cluster node member with the iSCSI interface on the other cluster node member. 
    I would like for the cluster network to be using the management interface on both cluster node members so as not to interfere with iSCSI traffic.  Can I change this?
    Binding order of interfaces is the same on both boxes but maybe I did that after I created the cluster, not sure. 

    Hi MnM Show,
    Tim is correct, if you are using ISCSI Storage and using the network to get to it, it is recommended that the iSCSI Storage fabric have a dedicated and isolated network. This
    network should be disabled for Cluster communications so that the network is dedicated to only storage related traffic.
    This prevents intra-cluster communication as well as CSV traffic from flowing over same network. During the creation of the Cluster, ISCSI traffic will be detected and the network
    will be disabled from Cluster use. This network should set to lowest in the binding order.
    The related article:
    Configuring Windows Failover Cluster Networks
    http://blogs.technet.com/b/askcore/archive/2014/02/20/configuring-windows-failover-cluster-networks.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Activation of Additional actions for existing Pers. Nos

    Hi Frdz,
    We have a scenario on additional actions that is; activation of additional actions for existing personnel numbers.
    1. Actually we uploaded personnel actions data without activating the additional actions in T529A. Then we came to know that can activate existing personnel numbers by maintain activation of additional actions T code OG00.
    I tried to activate per above procedure but SYS thrown error Pers.no XXXX X Error while creating additional actions.
    2. As well as I’m facing one more issue in Ad hoc query. When ever I transport query form DEV server to other servers I can’t execute query using assigned T code directly but once we execute query through SQ01, can execute with T code but this procedure can’t follow because in PRD I don’t have any access.
    Hence, kindly let me know the solutions to overcome these issues.

    Hi,
    1. While activating Additional Personnel Actions u vl find the node where in for already created personnel numbers u can activate. So maintain that node.
    2. Usally Adhoc Query authorization vl not be given to one particular user as its related with All The Users authorization as its related with client Administration.
    So Check vth ur basis guy
    Regards
    Pavani

Maybe you are looking for