Additional plugins are required to display all the media on this page

I realize plugins are not part of Mozilla, but Mozilla is giving me a looping error message that something is missing when I don't see at all that anything is.
I receive this message when I am trying to play an audio file for transcription. "Additional plugins are required to display all the media on this page". I know the program uses QuickTime, and that is up-to-date, but not sure what other plugins it would need.
There is an "Install Missing Plugins" button. When I click that, a Plugin Finder Service window opens and the message "No suitable plugins were found".

Do you have the Windows Media Player plugin?
* https://support.mozilla.org/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download
* http://www.interoperabilitybridges.com/wmpff/wmpfirefoxplugin.exe
* http://windows.microsoft.com/en-US/windows/downloads/windows-media-player (see Firefox)

Similar Messages

How do I prevent the yellow bar from appearing across the top of Hotmail emails that says, "Additional plugins are required to display all the media on this page." I DO NOT want plugin. How do I get Firefox to stop sending message?

Note: I did try to install the plugin just to see what would happen. When I clicked on "Install Missing Plugin" the next page said plugin could not be found---install manually. I clicked on manual install button and was directed to Adobe Flash Player - I already have current version of AFP installed.

The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe PDF Plug-In For Firefox and Netscape "9.4.0"
**New Adobe ReaderX with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Shockwave Flash 10.0 r42 (included in case you do did not get the current version)
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe ReaderX (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file
#***Windows: choose the .exe version
#**'''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "Download..." page below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*Download and information: http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#Update the [[Java]] plugin to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
NOTE: Your VLC Player plug-ins is also way out of date; you have version Version 0.8.6f, copyright 1996-2007 The VideoLAN Team. Go to www.videolan.org , download and '''Save''' the VLC media player installer to your hard drive, close Firefox, run the installer.

I installed Firefox 4 on my new computer and am getting a banner on some web pages stating "Additional plug ins are required to display all the media on this page - I haven't had this problem until today; I have been using Firefox on my Macs for years.

I just bought a new MacBookPro to replace my 3 year old MBP. I was not receiving the banner when I was on my old Mac running Firefox 3.6.16.
The yellow banner seems to appear randomly. I got it when I went to https://artistsnetwork.tv/e-myvideos.aspx and https://bit.ly.com but not when I went to Hootsuite, Twitter or textbroker.com.
There is an "Install missing plugins" button on the right side, but I'm afraid to click on it since I don't understand what might happen to my new computer.

I just bought a new MacBookPro to replace my 3 year old MBP. I was not receiving the banner when I was on my old Mac running Firefox 3.6.16.
The yellow banner seems to appear randomly. I got it when I went to https://artistsnetwork.tv/e-myvideos.aspx and https://bit.ly.com but not when I went to Hootsuite, Twitter or textbroker.com.
There is an "Install missing plugins" button on the right side, but I'm afraid to click on it since I don't understand what might happen to my new computer.

It says "additional plugins are required to display all media.... " but when I click "Install Additional Plugins" they're not found ?? helppp

It says "additional plugins are required to display all media.... " but when I click "Install Additional Plugins" they're not found ??
All I'm trying to do is play a video but It won't let me.. any help??

Can you post a link to the page where you have that problem?

How do I disable the "additional plugins are required..." error message? I removed Quicktime because of an incredible annoying security beep and I don't want the plugin or a constant reminder.

I want to right click on the error message and choose "do not show again."
This also occurs in 4.0 beta 7.
I attempted to use the "Error Console" addon to block it but was not able to identify the message.

See http://kb.mozillazine.org/Disabling_yellow_plugin_bar_-_Firefox
http://kb.mozillazine.org/about%3Aconfig

Additional plugins are required to view this site

it's only veehd.com, and with DIVX player. the website is fine, but when I get to watch the movie, the aforementioned message appears. I promptly click on the install missing plugins box, which once the window opens it tells me no suitable plugins were found (video/x-msvideo). so I click on the manual install, which takes me to the divx player install, which is already present.

Hi cor-el,
Your type attribute worked. My only question is now.....will it work for everyone? Will they have to have WMP downloaded? Unfortunately, the site is not live yet so no way to tell except on knowledge.

How to display all the questions of a survey in a page?

How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
sindu

Hi,
To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
About how to add a hyperlink into a page:
http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
Feel free to reply if there is still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

What additional resources are required to do the TestStand training courses I and II?

I have the TestStand course manuals for courses I and II and am currently trying to refresh what I learned a couple of months ago when I took the courses. I'm at the point where almost every VI required comes up broken because additional libraries are required in LabVIEW. Why aren't the additional required libraries listed in the course documentation? What are the additional libraries and how do I get them?

Hi there!
If I had to guess I would say that you're missing the TS support API libraries for LabVIEW... Since those are the only 'special' libraries used by any of the examples in the TestStand 3.x or 4.x training manuals.
I'm going to assume that you have some recent version of LabVIEW (8.x?) and some recent version of TestStand (3.x) installed? Unless you took the NI training course more than a few years ago, in which case you might need earlier version of TS, LabVIEW version really shouldn't matter. Evaluation copies ought to be sufficient so I wouldn't blame those...
(If you don't have LabVIEW at all. Make sure you have the correct LabVIEW Run Time Engine version, as that's a pretty common source of TS errors... But without LabVIEW half of the exercises in the training manual are moot anyway...)
In your LabVIEW install path, (C:\ program files etc...\LabVIEW 8.x\) look for the folder path "vi.lib\addons\TestStand\", it ought to be full of a few *.llb files that TS would furnish to LabVIEW when the product is installed. Sometimes when you install things in an unexpected order, or if you have multiple LVs installed, these items don't get put where you expect.
If the folder is empty, copy what you need from... the TestStand install path (C:\ program files etc...\TestStand x.x\) folder "AdapterSupport\LabVIEW" and restart LV. This might get you up and running.
If the folder is not empty. Try running a MassCompile from your LabVIEW Tools ->Advanced menu, there might be a version incompatibility issue...
Feel free to send me an email if you're still stuck. But there aren't any external dependencies/hardware drivers needed for the TS training sequences...
Cheers!
--Elaine R.
www.bloomy.com
Cheers,
Elaine R.
www.bloomy.com

How can i display all the Coloumns (Key Figures) in the Report's same page

Hi All,
I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
Appreciates the Quick help/Response, please.
Regards
Ramana

In Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0. This will make all columns show instead of paginating as it is doing now.

BDC(to display all the errors)

Hi Experts,
I am uploading data from flat file to sap application by using bdc call transaction method. My flat file is in Txet format.
Now i want to display all the errors which are nor processed.
The error report should be line no.of error record,error message and the records which are uploading.
i am using bdcmsgcoll structure.but it is not having the fields which are required for me. will suggest me with coding how to do it.
Thanks in advance,
Mythily

Hi,
By using function module FORMAT_MESSAGE
Here is a sample code:
LOOP AT t_message INTO fs_bdcmsgcoll.(T_message is a type of bdcmsgcoll)
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = fs_bdcmsgcoll-msgid
 lang = sy-langu
 no = fs_bdcmsgcoll-msgnr
 v1 = fs_bdcmsgcoll-msgv1
 v2 = fs_bdcmsgcoll-msgv2
 v3 = fs_bdcmsgcoll-msgv3
 v4 = fs_bdcmsgcoll-msgv4
 IMPORTING
 msg = w_message
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ELSE.
 WRITE:/ w_message.
endif.
endloop.
Hope this solves the issue, let me know if any queries.
Regards,
Rajani

How to show regions markers in Google maps based on longitude and latitude. on-click of region marker i want to display all the country locations based on the region from share point list?

Hello every one,
In My requirement i am having some regions with longitude and latitude in one SharePoint list. in another SharePoint list i am having the country values with longitude and latitude and region as look up field. I want to display all the region
markers in Google maps. on click of any region marker i want to zoom in the map to region level and i need to display all the country markers in Google maps under the region. can any body help me on this requirement.
Thanks in advance,
Venu.

Not sure about Google Maps but this is fairly easy to do with Bing Maps. I've used Bing Maps with SharePoint lists fairly regularly. Here are some blog posts:
http://blogs.bing.com/maps/2013/03/26/connecting-a-sharepoint-list-to-bing-maps/
http://blogs.bing.com/maps/2013/03/07/geocoding-a-sharepoint-list-item/
Once you have your sharepoint list connected to Bing Maps you can easily filter the list data based on the selected country if you have a country column in your list. If you want to take things a bit further an create a much cooler user experience you can
also use the Bing Maps GeoData API to get the country boundaries and show them on the map as polygons. These could be color coded based on some metric, or set up as the clickable area on the map rather than a pushpin. Here is a blog post on how to use the
GeoData API with the JavaScript Bing Maps control:
http://blogs.bing.com/maps/2013/06/25/retrieving-boundaries-from-the-bing-spatial-data-services-preview/
http://rbrundritt.wordpress.com

I need to display all the previous months sales.

Hi Gurus,
I have a requirement were i need to display all the previous months sales.
i.e if a user enters sept 2011, then in report it should display from April 2011(which is the first month of fiscal year).h
and also it should display total sales in another column till that month.
Regards
Arun

Hi,
Part 2 and Part 3 of the document.
Link: [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f002c608-2533-2c10-25a1-d0e7f7b5b662?QuickLink=index&overridelayout=true]
Link: [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f?QuickLink=index&overridelayout=true]
Documents by 'Surendra Kumar Reddy Koduru' are always useful. Try to go through all of them.
All the best!!!

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
 <mx:DataGridColumn headerText="Type">
 <mx:itemRenderer>
 <mx:Component>
 <mx:HBox verticalGap="2">
 <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
 <mx:Label text="{data.type}"/>
 </mx:HBox>
 </mx:Component>
 </mx:itemRenderer>
 </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

How can I display all the columns on the screen without scrolling from side to side?

My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size? If you can't do any of these, I think you're out of luck!

Additional plugins are required to display all the media on this page

Similar Messages

Maybe you are looking for