Additional properties tab showing empty

Hi all,
I'm new to Design studio.I'm facing issue with additional properties tab(already Checked from View tab) which showing empty from the time of installation of software(v1.3). When im accessing the chart which was already developed by other with data source assigned and having some properties i was unable to see the additional properties with options enabled.
Please give ur suggestions for this issue.
Thanks in advance,
Rakesh.

Hi Venu,
Im using chart from analytical component which is default component provided by Design studio only.
Below is the screenshot.

Similar Messages

  • Additional Properties not available

    Hello,
    I have a problem with SAP Design Studio 1.3 SP1. Normally if you select a CHART component the ADDITIONAL PROPERTIES view appears where you can customize the CHART. But in my case the ADDITIONAL PROPERTIES view is empty there are no options available. How could this be? I hope somebody can help me.
    Best Regards
    Fabian

    Hi Fabian,
    I come across this issue often in Design Studio 1.3 SP1.
    Try this..
    - Click on the Chart component
    - Uncheck Additional properties in the View Menu
    - Now click on the chart or any other component
    - Re-check Additional properties again in the View Menu
    It might sound very silly, but this is what I do to get the issue resolved.
    Let me know if it works for you.
    Regards,
    Sruthi

  • I have an additional row that is empty under my tabs in Safari 5.1 that I can't get rid of.

    The bar right under the tabs is empty and just taking up screen real estate. It isn't so bad on my desktop monitor, but when I'm just using the laptop screen it is a lot of lost screen space. I have only noticed it over the past couple of days, and I don't remember installing anything. I can't find a setting that will let me get rid of the bar. When there is only one tab and the tab bar is hidden it looks like this:
    Please help. It's driving me nuts trying to figure it out.
    Thanks!

    Please enable guest logins and log in as Guest. Launch Safari and test. Same problem?
    After testing, log out of the guest account and disable it if you wish.
    Mac OS X 10.6 Help: Creating a guest user account

  • Addition of new field in VA02 and VA01 in additional data tab B

    Hi,
    I have added a new field called delivery date to additional data tab B in both tcodes va01 and va02. Now, while creating or changing a sales order, if the Sales group is I00 then this field should be filled up mandatorily. For va01 and va02 i have done all the required coding where all this is done on pressing the save button when we are in the additional data b tab.It would throw an error message if the date is wrong and a wrning if it is empty (provided sales group is I00). I did the coding in 4462 screen.
    My requirement now is that if somebody doesnt go to the 'additional data b' tab n try to save the Sales order then also it should throw a warning or error stating that delivery date field should be filled up. Where exactly should i place the coding now? if it is screen 4900 then can someone suggest me at what place should the coding be done.
    Regards,
    Puja

    Hi Puja,
    Seems you have added the fields at item level in sales order and for this you must have appended the additional fields
    in vbap table. So to validate these fields you can use USEREXIT_CHECK_VBAP available in MV45AFZB user exit include.
    The fields you appended will be available in vbap structure, add your validation here or even in USEREXIT_SAVE_DOCUMENT_PREPARE  available in MV45AFZZ which is called before saving the sales order.
    Regards,
    Pawan

  • When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

    When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • How to get rid of the properties tab popping out when I create a new shape?

    Hi! I am having a bit of trouble getting rid of the properties tab that pops out everytime I create a new shape in Photoshop CC.
    Are there some settings to stop this from happening? I have my space strictly organized, as most of you probably, and I need to close it each time I create new shape... so it's frustrating.
    Thank you!

    After you draw out a shape, then go to the Properties panel fly-out menu and uncheck Show on Shape Creation

  • Inbox emails downloaded in Outlook 2013 but not my others folders emails they r showing empty in outlook

    Inbox emails downloaded in Outlook 2013 but not my others folders emails they r showing empty in outlook

    Hi,
    What’s your account type using in Outlook? IMAP account or Exchange account?
    Please make sure your Outlook 2013 is updated to the latest version. Then click Send/Receive > Send/Receive All Folders to manually download mailbox data files from mail server to Outlook data file. If it fails, please recreate the IMAP account in Outlook
    to have a try:
    http://support.microsoft.com/kb/829918
    Additionally, if you are using IMAP account, we can also refer to the following article for more IMAP Syncing issue troubleshooting:
    http://www.msoutlook.info/question/840
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
    make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Property missing in Node Properties tab

    Hi,
    I have created a Boolean Local Node property 'DoNotModify' with default value 'FALSE' and assigned it to a Property Category 'Accounts', but when i open the hierarchy and check the node properties in the 'Accounts' category the property is not showing up. I then wrote a property query on the same property and this is returning all the nodes in the hierarchy. So this means that the property has been created correctly, but why am i not able to see it in the Node Properties tab?? Please help. I am working in version 11.1.2.1.
    Thanks,
    Krishna
    Edited by: 903463 on Jun 24, 2012 11:45 PM

    Krishna,
    You need to assign the new property to an appropriate node type of the hierarchy else you will not be able to view the properties.
    If you still want to validate, click "Show all properties". This will available in later patches of 11.1.2.1. Not sure whih patch are you in of 11.1.2.1

  • Add fields in Additional Data Tab

    Hi
    I want to show some additional characteristic fields which are not showing in Additional Data Tab. Can anyone tell me how can i show the additional fields. Which transaction should i use to show the addtional fields.
    Regards
    Harshini

    Hi Harshini,
    Goto CL02 transaction and type class type 017 and create ur own class or the particular class type. Now u will get the basic data screen fill the description and maintian the status as "released".
    Now click on "Char" in this screen add ur characteristics and press enter, the system will ask for create press yes. Now ur basic data screen will appear give the description and mark status as "released" down u can see the format where u can choose "Character format" now click urscreen shows number of characters enter 10.
    Now move to Value tab page enter character value as 01 and description as Name of the vendor (or what u want to search) same as 02 as Vendor number.Now u save.
    Assign the class and class type to ur document type finally,
    Now u go to cv01n and see the Addl data u can find the characteristics u have created.
    Regards
    Kannan

  • UD Datasource Proposal Tab Shows Incorrect Column Names

    I created a UD datasource in BW and the "Proposal" tab showed me the correct column names for the table I had selected.  A couple of column names were then changed for this table in the source system but they are not showing up in the "Proposal" tab (the old column names are still there).  I refreshed and reactivated the source system in BW but it didn't work.  Any ideas on how to get the new column names to show up in the "Proposal" tab?  Thanks for any help on this.

    hi,
    check with the following steps you carried out in the ud data source creation.
    You are in the DataSource tree in the Data Warehousing Workbench.
           1.      Select the application components in which the DataSource is to be created and choose Create DataSource.
           2.      In the next screen, enter a technical name for the DataSource, select the type of the DataSource and choose Copy.
    The DataSource maintenance screen appears.
           3.      Go to the General tab page.
                                a.      Enter descriptions for the DataSource (short, medium, long).
                                b.      If necessary, specify if the DataSource builds an initial non-cumulative and supplies potentially duplicate data records within a request.
           4.      Go to the Extraction tab page.
                                a.      Define the delta method for the DataSource.
                                b.      Specify whether you want the DataSource to support direct access to data.
                                c.      UD Connect does not support real-time data acquisition.
                                d.      The system displays Universal Data Connect (Binary Transfer) as the adapter for the DataSource.
    Choose Properties if you want to display the general adapter properties.
                                e.      Select the UD Connect source object.
    The connection to the UD Connect source is established. All source objects that are available in the selected UD Connect source can be selected using input help. Source objects can be multi-dimensional storage or relational objects.
           5.      Go to the Proposal tab page.
    The system displays the elements of the source object (for JDBC for example fields, or for XMLA and ODBO characteristics and key figures) and creates a mapping proposal for DataSource fields. The mapping proposal is based on the similarity of the names of the source object element and DataSource field and the compatibility of the respective data types.
    Note that source object elements can have a maximum of 90 characters. Both upper and lower case are supported.
                                a.      Check the mapping and change the proposed mapping as required. Assign the non-assigned source object elements to free DataSource fields.
    You cannot map elements to fields if the types are incompatible. The system produces an error message in this case.
                                b.      Under Copy to Field List, select the fields that you want to transfer to the field list for the DataSource. All fields are selected by default.
           6.      Maintain the Fields tab page.
    Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page.
                                a.      Under Transfer, specify the decision-relevant DataSource fields that should be available for extraction and transferred to BI.
                                b.      If required, change the values for the key fields of the source.
    These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                                c.      If required, change the data type for a field.
                                d.      Specify whether the source provides the data in the internal or external format.
                                e.      If you choose an External Format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                                  f.      If required, specify a conversion routine that converts data from an external format into an internal format.
                                g.      Select the fields for which you want to be able to set selection criteria when you schedule a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                                h.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                                  i.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
    Note
    If you did not transfer the field list from a proposal, you can define the fields of the DataSource directly. Choose Insert Row and enter a field name. You can specify InfoObjects in order to define the DataSource fields. Under Template InfoObject, specify InfoObjects for the fields of the DataSource. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
    Entering InfoObjects here does not equate to assigning them to DataSource fields.  Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
           7.      Check, save and activate the DataSource.
           8.      Go to the Preview tab page.
    If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
    This function allows you to check whether the data formats and data are correct.
    Result
    The DataSource is created and added to the DataSource overview for the UD Connect source system in the application component in the Data Warehousing Workbench. When you activate the DataSource, the system generates a PSA table and a transfer program.
    You can now create an InfoPackage. You define the selections for the data request in the InfoPackage. The data can be loaded into the entry layer of the BI system, the PSA. Alternatively you can access the data directly if the DataSource allows direct access and you have a VirtualProvider in the definition of the data flow.
    http://help.sap.com/saphelp_nw70/helpdata/en/bc/ed1640b7b6dd5fe10000000a155106/frameset.htm
    hope this give you an idea
    regards
    harikrishna N

  • SVN properties tabs not updated

    Hello,
    I am using SQL Developer version 3.2.20.09 with SVN version 1.6.20.
    In SQL Developer I have two plsql modules opened, each in its own tab. I want to view the svn properties of the modules. After selecting Versioning>View subversion properties in the edit window, a tab opens with header 'Subversion properties' and the svn propererties of the module.
    Switching to the second plsql module, and executing the same menu option, nothing happens in the 'Subversion properties' tab. The properties of the first plsql module is still shown. The only way to show the properties of the second module is closing the 'Subversion properties' tab, and execute the menu option again.
    Is this a known problem?
    Joop

    Hi Ranjith,
    According to me theare woyld be two reason for your problem.
    1)you would be not haveing proper permission for those file which your are faceing problem.
    2)Your IE Ver would be 7.0 sometime this happens that EP not work fine with IE7.0 but no probs with IE Ver 6.0.
    hope this helps if so please reward points .
    Regards .
    Vinit Soni

  • Properties Tab in Adobe 10 vis-a-vis in Adobe 9

    How can i input additional details in the properties tab in Adobe reader 10 like i used to input in adobe reader 9

    You can edit the property tabs in Acrobat, but not Reader.

  • General tab is empty!!!!

    I was trying to ad usage stat to my ipad and i think i did a mistake and now my general tab is empty.
    Can anyone please send me the general.plist for ipad 5.0.1 wifi and if you have the usage stat file too.

    Hi,
    We are able to solve additional comma (,) problem in start of SOAPAction. Thanks for your inputs.
    But now we are facing another problem which contains 2 SOAPActions in HTTP Headers as shown below.
    POST /MyService/MyService.svc HTTP/1.0
    Accept: */*
    Host: training.com:8080
    User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
    content-id: <soap-001CC4FC74A51EE18DF87E8066A44800.sap.com>
    Content-Type: text/xml; charset=utf-8
    Content-Length: 277
    SOAPACTION:
    SOAPACTION: http://abc.com/acon/service/1.0/IServiceOut/AddNote
    <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
    <SOAP:Header/>
    <SOAP:Body>
    some body message
    </SOAP:Body>
    </SOAP:Envelope>
    Please provide inputs to remove empty SOAP Action from HTTP Headers.
    Do i need to set any parameter in receiver channel to suppress it?
    - Gopi

  • Address Leases shows empty

    Hi,
     I am using Windows 2008 R2, In my DHCP server address lease box shows empty and filters,Rservations also not working.

    Hi,
    If it is a newly created DHCP scope and can’t assign IP address to client, serval suggestions for you:
    1. If it is a domain joined DHCP server, make sure that DHCP server is authorized in Active Directory.
    2. Click IPv4 in DHCP console, make sure the State of the scope is Active.
    3. On DHCP client, type “ipconfig /release” and “ipconfig /renew”, force the client to renew IP address.
    4. Ping the IP address of DHCP server from client, check the network connection between them.
    Here are basic troubleshooting steps of DHCP server, just for your reference:
    http://technet.microsoft.com/en-us/library/cc779112(v=ws.10).aspx
    If the problem still exits, Are the DHCP server and client on the same subnet?  what is the properties of the scope? It would be helpful if you may post the TCP/IP properties of your DHCP server here.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Blank tabs show up on startup

    In Firefox 14, when I start Firefox, two tabs show up: the home page, and a blank tab that can never close (even if I navigate to a different page in that tab, I can never close it). My homepage settings are set to only show the home page, not two tabs.
    Now that I've upgraded to Firefox 15, starting Firefox now brings up TWO blank tabs--no homepage--though only the second one is still uncloseable.
    I have two profiles, one protected by a master password, and one not. These problems only manifest in my password-protected profile; the other profile works perfectly.
    I've coped with a workaround: After the first window opens, I open a new window, which works perfectly, and then close the original one. But I'd rather not have to deal with a workaround. Could anyone please help?

    Very odd. Since you have so many extensions, I wonder whether you would test with those disabled. A standard diagnostic for interference by add-ons is to try Firefox's Safe Mode.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, click "Start in Safe Mode." Does that still have the blank tabs?
    Note that Safe Mode makes other possibly relevant changes in addition to disabling extensions, and you can try those manually if you like before trying to figure out which extension it might be:
    '''(1) Disable hardware graphics acceleration'''
    ''Your "More system details" shows that this already is disabled for your graphics adapter, so you can skip this.''
    You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    orange Firefox button ''or'' classic Tools menu > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    '''(2) Clear toolbar customizations'''
    (i) Open your personal settings (AKA Firefox profile) folder
    Help > Troubleshooting Information > "Show Folder" button
    (ii) Switch back to Firefox and exit the program (e.g., Firefox > Exit or File > Exit)
    (iii) Wait a few moments for Firefox to finish updating files in your settings folder, then rename '''localstore.rdf''' to something else, like localstore-bad.rdf or localstore.old.
    (iv) You can restart Firefox now. If that didn't help and you want your customizations back, you can delete the newly created localstore.rdf and rename the old one back.

Maybe you are looking for