Additional rows in a table - again

I used the attached file to add-delete-insert rows within a table. It worked wonderfully until it got to about four pages. Then it began to repeat the header row. First just one repeat....but as the table grew, so did the number of headers, particularly on page two. I had a whole page full of headers as the table grew. First I thought it might be the additions I had made, but it does it on the basic file with which I started. Just click on "ADD" a few hundred times and watch the header row on page two. Weird problem. Anyone know why?

Hi,
It is on Object palette - Binding tab.

Similar Messages

How do you add additional rows to a table

...on Word of Mac?

If you just want to add an extra row at the end of the table all you have to do is hit tab while in the last cell, shroudlupe.
If you want to add a row in the middle or top of a table, highlight the row above or below where you want the new one to be and then go to the "Table" menu. Go down to the "insert" option and choose whichever is appropriate from "Rows below" or Rows above".
(If you want to insert more than one row ,then select multiple rows at the first step above, rather than just one , and it will insert the same number of rows that you have selected).
Another way of doing it, after selecting a row in a table, is to simply access the contextual menu by holding down the control key and clicking, or by "right clicking", and then select "insert rows" from the options presented.
Cheers
Rod

CLIENT_OLE2 - Attempting to insert additional rows into a table in MS Word

I cannot find the commands to perform the above. I have looked at the Microsoft site but it only gives the VB equivalent and I cannot work out the syntax for CLIENT_OLE2 commands. Does anyone know where I can find a list of Word.Application commands that directly correspond to the old Word.Basic commands?

Jeff·Þ·Bohrer wrote:
2) Why is it that after every other iteration the row values are erased?
Classic race condition. dump the for loop and p-node and just wire the 2D array to the table terminal.!
I'm not seeing the race condition. What I am seeing is the table emptying after the last element was written to it on every other run. I saw watched this with highlight execution on.
But I'm in full agreement with just writing to the terminal. It is a 1D array, so you will need to use a build array and transpose 2D array in order for it to write properly.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Adding Additional Rows to a table in subform

I am fairly new to Adobe LiveCycle and would really appreciate some help. I have simple table and would like for the user to click "+" or "-" to manage the number of row. I can't figure out now to complete this...then arrive at a SubTotal.

Hi,
I made your form dynamic, also i added some subforms to make your flowed stuff look good and i added sum script to Totla field.
Form attached.
BR,
Paul Butenko

Adding one additional row to table control of VA01

HI all,
I am working on free goods N:N senario which is not supported by sap standard.
so we have decided to club all the material on the basis of material group and PSTYV = 'tann' in the table control of va01 and at the end of tann we have to display the free goods .The user exit is USEREXIT_MOVE_FIELD_TO_KOMP.
Please help in in adding the additional row in table control of va01 (TCTRL_U_ERF_AUFTRAG).
Even i have gone through all the thread in sdn and tried all the solution but none of the solution is working .
plz quote solutions....
thanks..
Kundal.

The user exit is USEREXIT_MOVE_FIELD_TO_KOMP
Are you adding condition records, or adding free materials to VBAP? If free materials to VBAP, you're in the wrong exit, I think....look for routines that allow you to add to internal table XVBAP in includes named like MV45AFZ*, and remember to set you UPDKZ to 'I'-insert if you're adding new rows.
Not sure what you mean by not supported by SAP standard; SAP does support free goods, via config!
Edited by: BreakPoint on Mar 14, 2011 4:11 PM

Remove a row from multiple tables

Hello,
I have a form that has what appears to be one table. Since I needed 30 columns (29 of them are single character fields) I had to use 2 table objects. Then I needed the ability to add and remove rows. Adding a row at the end is easy enough. Deleting a specific row is the problem. At the moment, I added a third table which has a header row and a item body row. the body row is a button with the intention of removing that entire row from the large table. This means it needs to remove the row from all 3 tables.
My structure is:
form1
(Some other flowed subform that doesn't matter for us)
SubformPersonnel (a flowed subform)
SubformHeader (a positioned subform)
TextOverallHeader (text to label the oeverall 3 tables)
ButtonAddRow (adds a row to the end of all 3 tables)
SubformPersonnelTable (a positioned subform)
ContractorTableRemove (a table with 1 column for the Remove button)
HeaderRow (A hidden row to align the table with the other 2)
Item (A row with the Remove button)CellRemoveButton (the cell with the remove button and associated JavaScript)
ContractorTableLeft (a table with the left 15 printed columns)
HeaderRow
Contractor (A row of data to be removed when CellButton above is clicked)
ContractorTableRight (a table with the right 15 printed columns)
HeaderRow
Contractor (A row of data to be removed when CellButton above is clicked)
(Some other flowed subforms that I am not worried about at the moment)
The 3 tables are aligned so the headers all line up, with no spaces between them. The body rows then line up and this looks like one large table. From left to right, they are:
ContractorTableRemove, ContractorTableLeft, ContractorTableRight
So Item and Contractor rows are added when ButtonAddRow is clicked in the overall header. The intial count is set to 8 for each table, so I get 8 rows at startup. The minimum count is set to 1 for each. I know that each row of each table has the same index number because I filled those into a cell in each table durig the cell's initialize. This line, in the CellRemoveButton's click event deletes that cell's row in that table:
this.parent.parent._Item.removeInstance(this.parent.index);
I have tried all sorts of ways to delete the same row (using same index #) in the other 2 tables: ContractorTableLeft and ContractorTableRight, but don't seem to be getting the correct syntax correct. I have tried hard coding the references, using .parent as shown below, and also tried using an index of 1 just to try deleting a row with no results.
     this.parent.parent.parent.ContractorTableLeft._Contractor.removeInstance(this.parent.inde x);
Can someone get me the correct syntax here?
I have seen examples of putting a hidden delete button on each table and clicking that, but I am concerned that it will get in the way of the tables on either side of the table it is in. I reeally want to just reference the row and remove it so I can avoid any problems these additional delete problems may cause.
I have copied the form to https://acrobat.com/#d=7M8R50rEHf4AaVXppwyKLw

Thank you, Niall. Much appreciated!
The Delete button was more to make sure one could delete these outside a button in the actual row and I see I had the index wrong such that I was deleting the second row and not the first. I had toyed with using this as a hidden button if I could pass the index to the event's function.
I had not thought of adding the reference to each row as a variable. It seems to work very well.
For future reference to others, here is the code from the cellRemoveButton click event:
     // Declare some variables
     var i = this.parent.index;
     var oContractorLeft = ContractorTableLeft.Contractor;
     var oContractorRight = ContractorTableRight.Contractor;
     // Remove this row by accessing its index within the set of 'Item' row instances of the parent table
     _Item.removeInstance(i);
      // Since this table is actually 3 tables, we need to remove the other two table's instances as well.
     // Their index should be the same, so we just need to get their names correct.
     oContractorLeft.instanceManager.removeInstance(i);
     oContractorRight.instanceManager.removeInstance(i);
      // removing the row doesn't trigger calculations in tables in the form's current target (fixed in later versions of Acrobat)
     // force calculations to fire so the ItemIndex field's value is updated according to the remaining row's indexes
     // see http://forms.stefcameron.com/2006/05/20/add-recalculate/
     xfa.form.recalculate(1);
Again, thank you!
Karl

Save the additional row

hi,
I have a form.it was designed by adobe livecycle. but when it is opened by reader and add new row in the trable and insert data in the row of the table I am only able to save the form with data only 3 default raw. but the additional raw is not saved. if I save it and open it again it willshow only the 3 rows and additional rows are vanished. how can I save the additional raw with inserted data?

Make sure you activated "Automatically" to preserve the changes to your form when it's saved.

Creation of new Row in Tree Table

We are creating a new row using CreateListener which is written in Bean, after creating the row, we are adding it to the iterator and the new row is not getting highlighted and focus is not in new row in the table by default. It takes an click to make it editable. 'setActiveRowKey()' method didnot help here which is used in the af:table component to achieve the same.
Any pointers regarding this issue would be helpful..
Thanks,
Shruthi

Hi Max:
According to what you described, it's really wierd. An ADF table is Surrounded by a panelCollection or not doesn't matter in terms of CreateInsert operations, I think. Also each step you said OK doesn't mean that step is 100% problem free towards your final goal. For example, when you drag and drop and ADF table onto a JSF page, you forget to turn on 'row selection', it will be OK, you won't get any error message, but later on when you find that you need to turn it back on, you have to go back to JSF page source, to manually added codes to do so.
The simpliest solution and quickest one is to reinitiate a clean ADF project and do it all over again. It's simple straightforward in my view. Probably don't use PanelCollection first, just drop your ADF table on a form, or af:panelForm, but make sure your table and 'CreateInsert' button is surrounded by a form, otherwise, when you click on 'CreateInsert', nothing will happen. When everything works, then probably back it up and replace your form or af:panelForm with panelCollection. See how it goes.
Thanks,
Alex

Need to add new row in my table

Hi all,
1. i am developing new OAF page in which i have call stored procedure in my AM but when add code for create additional row only single row is creating.when i click for another row nonew is created.
please help..
this is the code i have used in AM
package EmployeeDetail.oracle.apps.fnd.EmployeeDetail.server;
import java.sql.CallableStatement;
import java.sql.SQLException;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.server.OADBTransaction;
import oracle.apps.jtf.gantt.javaui.events.TaskIdEvent;
import oracle.jbo.Row;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class EmployeeDetailAMImpl extends OAApplicationModuleImpl {
/**This is the default constructor (do not remove)
public EmployeeDetailAMImpl() {
/**Sample main for debugging Business Components code using the tester.
public static void main(String[] args) {
launchTester("EmployeeDetail.oracle.apps.fnd.EmployeeDetail.server", /* package name */
"EmployeeDetailAMLocal" /* Configuration Name */);
/**Container's getter for EmployeeDetailWIPVO1
public EmployeeDetailWIPVOImpl getEmployeeDetailWIPVO1() {
return (EmployeeDetailWIPVOImpl)findViewObject("EmployeeDetailWIPVO1");
public void task(String Name)
OADBTransaction txn=getOADBTransaction();
CallableStatement cst=null;
OAViewObject vo=(OAViewObject)getEmployeeDetailWIPVO1();
try{
String CallProc="begin emp_task(:1);commit; end;";
cst=txn.createCallableStatement(CallProc,0);
cst.setString(1,Name);
cst.execute();
cst.close();
catch (SQLException sqle) {
throw OAException.wrapperException(sqle);
public void initDetail(String Name)
OAViewObject vo=(OAViewObject)getEmployeeDetailWIPVO1();
vo.setWhereClause(null);
vo.setWhereClauseParams(null);
vo.setWhereClause("TASK_ID=:1");
vo.setWhereClauseParam(0,Name);
vo.executeQuery();
public void createtask()
OAViewObject vo=(OAViewObject)getEmployeeDetailWIPVO1();
if(!vo.isPreparedForExecution())
vo.executeQuery();
Row row=vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void rowadd() {
OAViewObject vo = (OAViewObject)getEmployeeDetailWIPVO1();
OADBTransaction txn = getOADBTransaction();
if (!vo.isPreparedForExecution()) {
vo.setWhereClause("1=0");
vo.executeQuery();
Row row = vo.last();
row = vo.createRow();
vo.setCurrentRow(row);
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void commit()
OADBTransaction txn=(OADBTransaction)getTransaction();
txn.commit();
public void rollback()
OADBTransaction txn=(OADBTransaction)getTransaction();
txn.rollback();
this on COntroller
package EmployeeDetail.oracle.apps.fnd.EmployeeDetail.webui;
import java.io.Serializable;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
* Controller for ...
public class EmpTaskDetailCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OATableBean tableBean =
(OATableBean)webBean.findChildRecursive("EmployeeDetailWIPVO11");
if (tableBean != null)
tableBean.setInsertable(true);
tableBean.setAutoInsertion(false);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am=pageContext.getApplicationModule(webBean);
String Name=pageContext.getParameter("SRNO");
Serializable[] Nam={Name};
am.invokeMethod("createtask");
am.invokeMethod("task",Nam);
am.invokeMethod("initDetail",Nam);
/**if(pageContext.getParameter("CreateRow")!=null)
am.invokeMethod("rowadd");
OATableBean tableBean = (OATableBean)webBean.findChildRecursive("EmployeeDetailWIPVO11");
if (tableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM)) &&
ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM))) {
am.invokeMethod("rowadd");
else if (pageContext.getParameter("Apply")!=null)
am.invokeMethod("commit");
else if (pageContext.getParameter("Cancel")!=null)
am.invokeMethod("rollback");
}

Hi ,
Modify the the methods as given below
public void rowadd() {
OAViewObject vo = (OAViewObject)getEmployeeDetailWIPVO1();
OADBTransaction txn = getOADBTransaction();
if (!vo.isPreparedForExecution()) {
vo.setWhereClause("1=0");
vo.executeQuery();
vo.next();
vo.last();row = vo.createRow();
vo.setCurrentRow(row);
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Thanks
Pratap

How do I add remove Multiple rows in a table

Guys,
Can somebody tell me How do I add and remove Multiple rows between two tables.
Also, I want the row or rows to disappear from the source table as soon as it is moved or added to the second table and appear again once its been removed from the second table.
The data is being fed by a BI query not a BAPI..
thanks,
Naseer

Hi Jarrod,
Thanks for replying. Even though it seemed like it might not be possible. But we figured it out.
We are using signals to basically LOOP and do an ADD and REMOVE.
Thanks again,
Naseer

Adobe form from webdynpro : Getting a single row in the table

Hello,
I have a scenario in which I have to create a adobeform from webdynpro application.
I have created the form and have the context designed in place.
I am facing a problem in the table I have in my adobeform.
I am adding rows to this table dynamically using a button using "addInstance"
Now on the webdynpro side , when I try to read this table I get a single row from this table.
This row is always the first row of that table.
I checked the following things from blog   /people/juergen.hauser2/blog/2006/09/12/avoiding-common-mistakes-when-using-tables-on-sap-interactive-forms , i.e. :
Cardinality of the node.
Tick on the option "Repeat Row for Each Data Item".
But still no success.
With deadlines to catch I had to post this question after trying a lot.Please help.

Hello Otto,
I had found this link before and used the same solution , but unfortunately is taking a long time.
Now what I am doing is :
1. I append 10 rows into the table then bind it to the node
2. Then on the adobe form I have removed the check on "Add row for each line item" because of which it shows only 1 row
     on the form.
     Now I add rows dynamically, but this puts a limit on the number of rows can be added to the table i.e. 10.
But this again has added problems like while displaying the form or modifying I hav to handle it seperately and cannot use the same form as it is.( as I have removed the tick for "Add row for each line item" ).
Thanks,
Omkar Mirvankar

How to get current row of Advanced table with no submit

I have an advanced table with an 'Add another button'. When an empty row is created by clicking this button, LOV is used on the first column to populate other fields of the row. The rows of the table carry a button called "Add dependencies" whose functionality is to take the user to a different table to add rows to a different VO. This button is just a button and not a submitButton. I am passing the row's primary key as part of the URI as Vo attribute FdTaskId={@FdTaskId}
The button works perfectly fine for database fetched rows (rows already present in the database), but, for the rows created using 'Add Another button', though LOV populates all fields including the primary key, the URI parameter passes null to the next page. That means, the VO attribute is not set. This works fine only when a 'submit' happens in the first page. For example, if I click Add another row again, then the previously inserted row passes the primary key fine as part of {@FdTaskId}.
Could you please help me how I can resolve this issue?
Thanks,
Datta

I am doing exactly that. My issues is that, VO attribute is passed correct for the table rows which are fetched from the database. For the table rows which got created through 'Add Another button', the VO attribute passed through URI as {@FdTaskId} is returning null. The VO attribute sets only when a form submit happens. For example, after adding a row through 'Add another row' button, click the same button again to add one more row and now go back to previously added row and now you can see that its VO attribute is set ({@FdTaskId} carries value )

How to Update Particular row in a table from OAF page

Hi Can anyone please help me on the following requirement:
In my oaf page i am displaying table values(supplier site details from base tables) with update and delete icons . When i click on update button a new page opens in which we used to update the values and click on apply button which again comes back to the original page.
So when i click on apply button on update page i have to first search for the site in the site table whether it exists or not, if not exists i have to create a new row and save the data, if site exists in the table i have to update the row of a table for that particular site. I have written code for this but unable to achive the requirement, it is not updating the existing row of the table. And i am doing all this on the Temp tables.
So now when i save, previous transaction is also updating along with the current transaction. That means when i m trying to save 2nd transaction values , 1st transactions values are getting updated with the 2nd transaction values(2 rows are getting updated)
Can anyone help me with the code used for updating the current row of the table. Please correct me if i m doing anyting wrong in code.
following is the current code i m using and which is failing :
Controller Code
if(pcontactaction.equals("createECdetailsEvent")) {
String currentSiteName=pageContext.getParameter("SiteName");
System.out.println("Selected Site Name is : " + currentSiteName);
Serializable x[]={reqNum,suppId,currentSiteName,pnotifMethod,pfaxNum};
System.out.println("Invoking AM Method.........");
am.invokeMethod("initCreateECDetails",x);
System.out.println("initCreateECDetails Method Executed. ");
//am.invokeMethod("save");
localOAApplicationModule.getTransaction().commit();
pageContext.setForwardURL(
"OA.jsp?page=/oracle/apps/floaf/flpos/supregister/webui/ECDetailsPG"
, null //not needed as we are retaining menu context
,OAWebBeanConstants.KEEP_MENU_CONTEXT
, null //not needed as we are retaining menu context
,null // no parameters are needed
,true //retain AM
,OAWebBeanConstants.ADD_BREAD_CRUMB_NO
,OAWebBeanConstants.IGNORE_MESSAGES);
AM Code
public void initUpdateECDetails(String request_number,String supplier_id,String site_name,String site_id,String notification_method,String fax_number)
OADBTransaction localOADBTransaction = getOADBTransaction();
String siteToUpdate;
siteToUpdate=site_name;
String siteidToUpdate;
siteidToUpdate=site_id;
System.out.println("Site Name to Update or Create is : " + siteToUpdate);
System.out.println("Site Id to Update or Create is : " + siteidToUpdate);
System.out.println("Inside Update EC Details MEthod.");
OAViewObject suppSiteDetVO = getFLPOSSuppSiteDetailsVO1();
FLPOSSuppSiteDetailsVORowImpl sro=null;
String existingWhereClause = suppSiteDetVO.getWhereClause();
suppSiteDetVO.setWhereClause(null);
suppSiteDetVO.setWhereClauseParams(null);
suppSiteDetVO.setWhereClause("SUPPLIER_ID = :1 AND REQUEST_NUMBER = :2 AND SITE_ID = :3 ");
suppSiteDetVO.setWhereClauseParam(0, supplier_id);
suppSiteDetVO.setWhereClauseParam(1, request_number);
suppSiteDetVO.setWhereClauseParam(2, site_id);
suppSiteDetVO.executeQuery();
suppSiteDetVO.setWhereClauseParams(null);
suppSiteDetVO.setWhereClause(existingWhereClause);
int rowcount = suppSiteDetVO.getRowCount();
System.out.println("Fetched Rows : " + rowcount);
if (rowcount == 0) {
Row row = suppSiteDetVO.createRow();
System.out.println("Row is : " +row);
suppSiteDetVO.insertRow(row);
String siteId = getOADBTransaction().getSequenceValue("FLPOS_SITE_ID_SEQ").toString();
System.out.println("New Site ID : " + siteId);
row.setNewRowState(Row.STATUS_INITIALIZED);
row.setAttribute("RequestNumber", request_number);
row.setAttribute("SupplierId", supplier_id);
row.setAttribute("SiteName", site_name);
row.setAttribute("SiteId", siteId);
row.setAttribute("FaxNo",fax_number);
row.setAttribute("NotificationMethod",notification_method);
System.out.println("New Row Created for Supplier Site.");
System.out.println("Data Saved to table.");
else{
System.out.println("Inside Else Block ");
try {
System.out.println("Inside Try Block ");
Row[] row = suppSiteDetVO.getAllRowsInRange();
for (int i = 0; i < rowcount; i++) {
sro = (FLPOSSuppSiteDetailsVORowImpl)row;
String psiteName=sro.getSiteName();
Number psiteid=sro.getSiteId();
System.out.println(" p Site Name is : " +psiteName);
System.out.println(" p site id is " +psiteid);
if(psiteid.equals(siteidToUpdate) ) {
sro.setAttribute("FaxNo",fax_number);
sro.setAttribute("NotificationMethod",notification_method);
//getOADBTransaction().commit();
break;
catch (Exception e) {
System.out.println("Exception in update : " + e);
}

Please answer following:
1. Are you using EO based VOs or ReadOnly VO?
2. What is your VO Query for the search and update?
3. Why have you based your logic on site_name; you should have used site_id?
4.Are you getting correct site name in handling createECdetailsEvent event in CO?
5. In case of update are you getting correct values on the Update Site Details?
6. On coming back from Update page to Supplier Site Search page, do you see old values of the site or the new values in the results table?
Please share the screenshot if possible.
-Prince
[email protected]
http://princekapoor82.blogspot.com

How to retrieve the number of "free" rows in a table?

Hi,
if in a client only environment (no sync to mobile server) rows are inserted and deleted into a table,
is there a way to retrieve the number of "free" rows in a table? Number of "Free" rows stands for
number of rows that can be inserted again, before the table extents in size.
Is there a way in OLite 10.3.0.2.0 to retrieve the size of tables and indexes? ALL_TABLES is not
a place that really works.
Best regards and many thanks,
Gerd

Hi Gary,
many thanks, the partner uses a Lite client db without sync. The db runs inside an laboratory device and collects measures. There must be a way to estimate the the number of "measures" rows, that stil can be stored in the db.
Than we need to make the deleted space available for new rows. The partner tested defrag.exe and found that it
needs very long time to run, especially if the db is bigger than 2GB. ... and that this run sometimes fails.
Is there any recommendation the partner can follow on?
Thanks,
Gerd

Count of rows of a table in header

Hi Experts,
I am stuck in a tricky scenario.
I need to get the count of rows of a table in a webi report in the header of the report.
And the count should change dynamically according to the filtering done on the table.
For eg.
If I have 10 countries in a table, so table has 10 rows.
Now the count on header should show 10.
Now if we filter the column to 5 countries, the count on the header should change to 5.
Any Idea's.
Regards,
Gaurav

Nops
It doesn't work.
Let me reframe my issue again:
I dragged country object on my report.
UK
US
JAPAN
CANADA
Now lets say in the report title, I write the formula as =Count(country)
It will give me 4.
Now I clicked on the column country and applied filter i.e. country = US ; UK
Now the block shows
UK
US
In the header the cell still shows 4, which I want to see as 2.
Any ideas....?
Thanks
Gaurav

Additional rows in a table - again

Similar Messages

Maybe you are looking for