Additional Tab in Contract Header for SRM 7

Hello,
I have a requirement to add custom tabs into the Contract in SRM 7 (latest version)
So I added custom fields in the header structure via config, the fields are visible in BBP_PDHSC. Also I did add additional tab into the contract using FPM configuration where I have attached the custom webdynpro component to it.
Now the issue is the custom field values doesn't get updated into the system. The CLL layer class /SAPSRM/CL_CH_WD_BOM_CTR method submit_update doesn't get triggered for the custom fields whereas it gets triggered for standard fields. Also I noticed that the mt_mapper table has the /SAPSRM/WDC_CTR_DODC_H_BD as deactive..
I think I am missing something in my custom component but cannot figure it. Could anyone please help me out with the update of custom fields into teh system..
Thank you..

Hi Arif,
Please follow the steps mentioned in the below link.
Create Additional data tab in Rfx/Response/Contract
Thanks and Regards,
Shakeer Hussain

Similar Messages

Additional Tab in Billing header

Friends,
We have a business requirement to display/edit custom fields in the sales order and the biilling document. For the sale order, we are planning to use additional tab B and for the billing document also we also need to implement as sales order additional tab.
Firstly is it possible to implement additional tab in billing header & item, could you please guide how we can implement the new tabs.
Thanks in advance
Best Regards,
Goutham

Hi
SAP Note Number 302497 Additional cust. fields not displayed in 'Additional data B' and related notes tells you how to do it.
Other useful notes:
SAP Note 386694 - Additional data not displayed in screen 8459 and 8309
SAP Note 420546 - Additional data B and transaction variants in sales order
SAP Note 209278 - Display of customer-specific fields in sales doc
Regards
Eduardo
Edited by: E_Hinojosa on Feb 17, 2011 3:48 PM

When I click on the + sign, I do not get another tab even though an additional tab WILL open if, for example, I click on a link in an e-mail or on a site.

Before the latest upgrade, I could open a new tab by clicking on the + to the right of any open tabs. No more. Nothing happens. If I click on a link in an e-mail or on a website, however, a new tab will open. For example, if I get an e-mail from Facebook that says someone has posted and I click the link, I will get a new tab opened and Facebook will be there. Then I have both tabs open and can navigate on either with no problem. If I then click on the + sign, nothing at all happens. I am perfectly able to open Safari with Firefox running, and I can get multiple tabs going there with no effect on Firefox. That is, I can go back and forth.
I am grateful for any help! Thank you.

Extensions
Produtools Manuals 2.1 Community Toolbar 3.21.0.1 ({b2bf7b3f-bf0b-4c48-aec6-f92c51be63e1})
Open the Add-ons Manager by
Pressing the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by; '''Tools > Add-ons.'''
Hot key; '''<Control> ''(Mac: <Command>)'' <Shift> A)'''
On the left side of the page, select Extensions.

Additional Tab Screen EXIT Name for VA42, VA43

Hi All,
Anyone can suggest me Additional tab screen exit, so i can display some fields in particular tab. It's Urgent.
Thanks
Amit

Modification is required. You should consider looking at these Notes:
[Note 386694|https://service.sap.com/sap/support/notes/386694]
[Note 209278|https://service.sap.com/sap/support/notes/209278]
[Note 398418|https://service.sap.com/sap/support/notes/398418]
[Note 302497|https://service.sap.com/sap/support/notes/302497]
[Note 170183|https://service.sap.com/sap/support/notes/170183]
Regards,
Jamie

SRM -- MDM -- ECC integration for central contract management for SRM 7.0

Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu Joshi

Hello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin

Additional tab will not open for links

previously i have been able to click on a link, and the link would open in a new window or tab. but now whenever i try to open a link through a website, it will not open the link in a new window or new tab. how can i fix this?

Hi ArletteGH, I'm not sure which one of these is the better description of your issue:
If you Ctrl+click or middle-click a link:
* Firefox creates a new tab, loads the link in that tab, but the tab stays in the background rather than being made active (default behavior)
* Firefox creates a new tab, but doesn't actually fetch the page until you make the tab active
* Firefox creates a new tab, but the tab and address bar stay blank, as though the address never got transferred to the page
Are any of those close to describing your problem?

Additional tab in ME21N

Hi gurús,
In NB document type (PO), the condition type appears but not in UB documenty type.
I would like to know, how to add an additional tab at PO header, for example, condition tab.
Regards
Enzo

Jurgen is right. You can do it by assigning the pricing procedure here:
IMG > MM > purchasing > conditions > Define Price Determination Process > Define Schema Determination - Determine Schema for Stock Transport Orders.
Amit

Adding Custom fields to PO Additional TAB in Header

Hello Experts.
We have a requirement to add 2 additional fields in the PO header - ADDITIONAL TAB. I have included the fields in CL_EKKO include and activated it. Can you please let me know the exit or BADI or sample to have this in Additonal TAB.
I understand that we can create a custom TAB in header and bring in those fields. But i would like to bring these custom fields in ADDITIONAL TAB of PO header only....not creating any new customer tab.
Please share your thoughts.
Edited by: Ganeshkumaran Gopalakrishnan on Oct 6, 2011 3:57 PM

Hi Max,
Using SAPLXM06 0101 is adding new Custom TAB in PO Header. As i mentioned i dont want new custom tab in Header. All I want is to add the new custom fields in the existing Additional DATA TAB of the PO header.
There is already existing TAB called Additional DATA, i need my custom fields to be available in that TAB, rather than creating a new tab for those fields.
Please let me know how to add it to existing Additional data tab in PO header. thx

Userexit or BADI for adding additional tab in MIGO screen.

Hi all ,
Kindly tell me as to which exit or BADI is used to add additional tab in MIGO header.
Regards

Hi,
Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
Declare the custom fields in a Z**TOP include.
Under the PBO method declare the program name and screen number
Under PAI method declare the field to u2018Xu2019.
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item (In this case production order number, material, u2026u2026.). For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY.
In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
In order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value and the production order number details in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZZGBAGS'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.

Adding 3 new tabs in MIGO header

Hey folks ,
I have implemented BADI : MB_MIGO_BADI for addition of an additional TAB at the header level for a single TAB .
but now i want to add two more tabs in the header but it says """""" The content of global field GNO_INPUT (set in method MODE_SET) will   influence the number of external subsreen:'''''''''._ As using the BADI it shows as :
IF g_no_input IS INITIAL.
    e_cprog   = 'Screen name '.
    e_dynnr   = 'screen Number '.                     "External fields: Display
    e_heading = 'TAB heading ' (004).
endif .
but the problemis that where i should handel the screen name and number for another two tabs .

Hi ,
I solved this problem , using only one implementation.
I used GF_CLASS_ID type Migo_class_id   default value ' MIGO_BADI_EXAMPLE1'and
          GF_CLASS_ID1 type migo_class_id default value ' MIGO_BADI_EXAMPLE2' .
Then Under INIT_Method
APPEND gf_class_id TO ct_init.
   APPEND gf_class_id1 TO ct_init.
Then Pbo_header methos
IF I_CLASS_ID = GF_CLASS_ID .
" Ur code
Endif .
IF I_CLASS_ID = GF_CLASS_ID1 .
" Ur code
Endif .
Regards:
Atanu

Additional tab in outbound delivery

Good day,
I'm looking for the way of creating an additional tab in header details of outbound delivery.
Could you let me konw any porper solution?
Thanks for your quick response in advance.

Dear Eun-Cheol Han,
If you want create an additional tab in delivery header you have to go for a screen exit.
Please consult your technical team .
Please find below threads to get more exploration.
http://sapsdforum.com/category/sd-user-exits/
http://sap.niraj.tripod.com/id21.html
Please let me know if you have any further clarifications
Thanks&Regards
Raghu.k

VA11 - Additional Tab in the screen

Hi All,
I want to have an additional 'Tab' in the screen for VA11. Is there any screen exit available for this ?
I wasn't able to find any and would like you guys to help me in letting know if there is any available. Also if not a screen exit, is there any other way to get this done?
Remember, the addtional tab will have some user defined fields which will be filled in and stored in some custom table.
Thanks in advance!
Anand

Hi,
You can make use of the following code to search for the screen exit,
REPORT ZEXIT_HELP no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
     write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
Hope this helps,
Rgds,

Adding tabs at the header

Hi Experts,
I have added some tabs at the header for Order,Order from Template and Order Template. Problem I am facing is when I am clicking on those tabs it is working fine everywhere except when I am in catalog page.
Has anybody faced the similar issue. Please advice on this.
Thanks in anticipation.
Regards
Harshmeet Singh

Hi,
I have added tabs for Order,Order from template and OrderTemplate in header.jsp which are in the form of links in welcome.jsp. I am not able to go back to any of the pages from catalog page. It is giving an error at the bottom of the page saying location is null or not an object.But the same links are working if I am in any other part of the web shop.
@Arshi
Thanks for your input. Will work on it and will let you know if I still face any issues.

Add a custom field in output tab of po header SRM 7.0

Hello All,
Please let me know How to add a custom field in output tab of po header SRM 7.0.
Regards,
Neelima

Hello Neelima,
Have you already check the note 458591, which help to custom fields creation? I think this note can be relevant for you.
Best regards,
Denise Zanuz

Trranslation of Additional Tab Header in cProjects

Hi guys,
does anybody know how to translate the header of an additional tab, added by customizing (Add Additional Tab Page in cProjects)?
I tried it by switching the system language to it/en etc. but the header is always global and I have no chance to translate it.
In se63 I´m also not able to translate, there is no text...
THX for advice,
Tobias
Edited by: Tobias Hämmerle on Jan 18, 2010 11:11 AM

Hi Zhenbo,
a few month ago I found the solution. You can link the the table header in customizing to an OTR-Text alias, the same way you do in the workbench.
$OTR:<package>/<alias>
Regards,
Tobias

Additional Tab in Contract Header for SRM 7

Similar Messages

Maybe you are looking for