Additional technical usages

When installing an ERP 6.0 EHP4 system, you install an EHP4 Ready System and then install EHP4 with SAPehpi. For this you have to choose all the needed business functions and then map them with note 1165438 to the needed technical usages. So far, so good....
My question:
What's happening, if later (after EHP-installation) new business functions/technical usages for example Human Capital Management or HCM Self Services are required ? Is it possible to add additional technical usages to the system (even if the EHP4-level stays the same) and how will this be done ? I have looked into a lot of documentation of service.sap.com/erp-ehp, but this is not clear for me.

Hi,
After upgrade, if you need to install additional usage type then you can install it with SPAM/SAINT but you need to have stack xml file for this. You can get this information in Technical FAQ guide on http://service.sap.com/erp-ehp.
Thanks
Sunny

Similar Messages

SAINT or SAPEHPI to add additional technical usages?

I'm not sure whether to use SAINT or EHPI to add additional technical usages. I've seen comments recommending both ways but haven't found anything definitive from SAP. Note 1298878 "Installation of SAP Enhancement Package 5 on SAP ERP 6.0" says in section VII/...SAINT Passwords:
"These passwords are only required, if you install additional technical usages with SAINT. This is only possible for systems, which have the technical usage "Central Applications" already installed."
It then lists some components but it isn't really clear that all components should be installed with SAINT. Is there any definitive documentation I'm missing? Thank you,
David

I found it!
On page 30 of the document "How to Install SAP Enhancement Package 5 for SAP ERP 6.0. A Practical Guide" it says
Installation of Additional Technical Usages
ABAP
To install additional technical usages after you have already installed technical usages of enhancement package 5 with SAPehpi, use the following tools:
- If the technical usage Central Applications of enhancement package 5 is already present in your system, use transaction SAINT. Make sure you import the newest SPAM/SAINT update before installing additional technical usages with transaction SAINT. You also have to generate a stack configuration file with the SAP Solution Manager Maintenance Optimizer. If you want to use the parallel import feature of R3trans, follow the instructions of SAP Note 1309506.
- If the technical usage Central Applications is not yet installed in your system, use the SAP Enhancement Package Installer.
Good luck all,
David

Technical Usage for SAP ERP 6.0 EhP4

Hello gurus,
I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
But I dont know which technical usage to choose.
Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
SAP ERP 2005/SR2     XSS     XSS     Self Services
SAP ERP 2005/SR2     LSOCP     LSOCP     Learning Solution Content Player
SAP ERP 2005/SR2     BD     BD     Biller Direct
SAP ERP 2005/SR2     XECO     XECO     Extended E-Selling Components
SAP ERP 2005/SR2     ECC     ECC     Central Component
SAP ERP 2005/SR2     BP-ERP     BP ERP     Business Packages (Portal Content)
SAP NetWeaver 2004s/SR2     PI     PI     Process Integration
SAP NetWeaver 2004s/SR2     BI     BI Java     BI Java
SAP NetWeaver 2004s/SR2     AS     AS Java     Application Server Java
SAP NetWeaver 2004s/SR2     EPC     EP Core     Enterprise Portal Core Components
SAP NetWeaver 2004s/SR2     EP     EP     Enterprise Portal
SAP NetWeaver 2004s/SR2     AAS     AS ABAP     Application Server ABAP
There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
Please advise.
Thanks, Cha Cha

Hello,
You may check the attachments in note 1165438 for business function -> technical usage equivalence.
as for usage types, you seem to have listed product instances instead. Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note 1165438
Anyway, the technical usagesI can see right away are:
- SAP Learning Sol-Frontend CP
- XSS Self Services
- SAP FSCM - Biller Direct
- Central applications
- SAP XECO
Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
Best regards,
Miguel Ariñ

Cannot select Technical Usage "Learning Solution - ABAP only" on ECC Server

Dear Gurus,
        My environment are
        a SAP ERP System(ABAP only) in SMSY with
               Product Version = "SAP ERP 6.0"
               Main Instance = "SAP ECC Server" (as Relevant)
                       Note When I select another Relevant for "SAP Learning Sol-Frontend"
                                   Use in logical components; action not possible (see long text)
                                   Message no. SMSY_EDIT_LANDSCAPE413
                                   ... There can only be one relevant ABAP-based main instance. ...
        Select Product Version = "EHP4 FOR SAP ERP 6.0 / NW7.01"
        and Target Stack = "SAP ERP Enhancement Package 4 on NW7.01 - SP Stack 04"
        Existing Technical Usages are
                 - Central Applications
                 - ERecruiting on ECC Server
                 - Financial Supply Chain Mgmt
                 - Human Capital Management
       But I can't add Technical Usage for "Learning Solution - ABAP only" or "HCM - Learning Solution" (The checkbox is in gray color so I can't check it)
       What am I wrong? Please advice.
Best regards,
Choosak

Hi Choosak,
Try this ,
Go to SMSY transaction then select your system .
In right side you will get the screen where all usage types are defined for your system.
Select learning solution and HCM and save it.
Go back to your solution and see whether you can see Learning solution after that.
Thanks,
Gerard

Selection of EHP4 technical usages are all greyed out

Good day
We are currently on ERP6.o SPS 6 and would like to upgrade to ERP 6.0 EHP4. Our system has been defined in SMSY in Solman as an ERP 6.0 system. In selection of Main Instances, ECC Server has been selected as relevant.
In mopz, we create a new maintenance transaction, choose the product version as ERP 6.0 and select our systems. On the next screen we choose "Enhancement Package Installation" and then "find download files".
In the next screen we select the product version and target stack. However, all technical usages are greyed out. When I scroll over it it states that Required Main Instances are SAP ECC Server. Why is it not recognizing the ECC Server as main instance as per smsy?
Please assist.
Thanks
Wilhelm

Hello,
Make sure that following things are OK :
- Solution Manager should be patched to the latest release
- The ERP 6.0 system must have the product version SAP ERP 6.0. Make sure that it is not accidentally maintained as SAP ECC 6.0.
Also have a look at these OSS-notes:
SAP Note 1122966 Maintenance Optimizer: Notes for Enhancement Packages
SAP Note 1287216 Maintenance Optimizer: pre-select technical usages
SAP Note 1139602 Several enhancement package releases on one system
SAP Note 1134872 Maintenance Optimizer: FAQ for Stack Delta Files
SAP Note 1233954 Maintenance Optimizer: No XML Generated in EPS Inbox
SAP Note 1172948 SAP Solution Manager - Basic functions
Wim

Technical Usages for EhP4 upgrade for CP/WSD BP activation

Dear All,
I have installed EhP4 ready system. Now in the process of upgrading it to EhP4 system.
This system is mainly for activation V1.604 Best Practices of Consumer Products/Wholesale Distribution.
Please let me know which technical usages I can use for EhP4 upgrade.
Thank you in advance
Regards,
Yuvaraj

Hi Sunny,
I have referred this note 1500688 SAP Best Practices CP/WSD US V1.604 (Consumer Products/Whole Sale Distribution).
There it is mentioned to activate
LOG_PP_LMAN
LOG_PP_MIS
LOG_PP_PRSP
LOG_PP_SRN_CONF
FIN_LOC_CI_1
OPS_ADVRETURNS_1
This business functions comes under the technical usage 'Central Applications'
So does it mean that, selecting only the Central Application as the usage type, enough for BP activation
Thank you
Yuvaraj.

MOPZ selecting technical usages with JAVA pre-requisite

Hello all,
Upgrading from 46C to EHP5. Some of the desired technical usage require both ABAP and JAVA system. For example, HCM_Learning Solution has the following pre-requisites
- SAP Learning Sol-Client (Lern, Auth, CP) - all JAVA
- Learning Solution (ABAP)
- SAP Learning Sol-Frontend ABAP
- Portal Content (Java)
So cannot select it in MOPZ since the 46C is not connected to a JAVA instance.
It means the ABAP side reqires two-step upgrade (1) upgrade to EHP5 without the HCM_Learning Solution, then (2) connect to a JAVA instance, select it it in MOPZ, then another ABAP upgrade with HCM_Learning Solution.
Any suggestion how to do the ABAP side in single step - i.e. include the Learning Solution (ABAP and the SAP Learning Sol-Frontend ABAP, then just create the JAVA instance after the ABAP upgrade? Is this a valid scenario?
Regards,
Terry

Hi,
Workaround of this situation is:
Add As Java usage type as well in system definition in SMSY. As a result you will be able to select these usage type as well in MOPZ. But it will give you Java packages as well. You can ignore those packages. And then you can carry out upgrade in a single step.
Thanks
Sunny

Wrong technical usages in xml file

Solution Manager MOPZ is generating XML files with technical usages different from those I selected.
I am attempting to upgrade to EHP4 for ERP with three Techical Usages.
In my maintenane optimizer transaction I selected financials but in the resulting xml and text files I see Leasing/Contract A/R & A/P.
As a result of this and other unseen problems with the xml file generation my upgrade fails on the execution of PREPARE/INIT/PREPARE_JSPM_QUEUE.
Has anyone else seen similar behavior and if so how did you get around it.

Hi,
This is might be because of wrong configuration of system in solution manger. Please follow verify system configuration in solution manager with the help of below guide:
https://websmp203.sap-ag.de/~sapidb/011000358700000293582009E.PDF
Hope it will resolve your problem..
Thanks
Sunny

EHP4 on ERP 6.0 - Missing technical usages

Hello all,
we have been asked by our functional people to make a copy of our Production HR system and try the EHP4 on this copy from PRD system.
I have made the copy and now I am trying through the maintenance optimizer to select the EHP4.
When I am reaching the option to select the Technical Usages, I cannot see 2 of the 3 required TUs from our functional people.
They would like to have:
Human Capital Management, Travel Management and Cross
ERP SAP
but from these 3 I can find only the Human Capital Management. In particular, under the Human Capital Management tree, there are 2 option "grey" (cannot be selected) HCM-Services & HCM Self Services and one which is "selectable": Human Capital Management.
Could you please give me some info how could I add the missing Technical Usages?
Best Regards,
Loukas

Hi ,
ok this is clear. However there is no HCM-Services in my production instances list in SMSY.
I go then and expand the tree of HCM-Services in MOPZ and I see a small table with the required instances and product versions.
For the HCM-Services I have:
Human Capital Management (the row of the table is white/grey = activated for my system)
SAP XSS (the row is red and no system is assigned)
Portal Content Common (the row is red and no system is assigned)
Portal Content Self Service (the row is red and no system is assigned)
The required Instances are:
SAP ECC Server
SAP XSS (Self Service)
SAP NW - EP Core
SAP NW - EP Core
All of them are selected as relevant in my SMSY but as you can see they are not activated in MOPZ.
It is wise to mention though that we have no Portal system installed in our landscape.So I guess , I am trying to "cheat" the SolMan to allow me to donwload EHP4 for a system which doesn't exist?
Kind Regards,
Loukas
Edited by: Loukas Rougkalas on Jan 3, 2011 11:33 AM

MOPZ - EhP 3 -- EhP 4 - technical usages - ambiguities

http://service.sap.com/solutionmanager
--> FAQ
<...>
What are the benefits of Maintenance Optimizer?
Maintenance Optimizer simplifies the management of patches for the customer's SAP support staff and helps to reduce maintenance costs.
<...>
vs.
Note 1287216 - MOPZ: pre-select technical usages
<...>
The detection process implies some unavoidable ambiguities. It's a requirement to check manually, whether all of the highlighted technical usages have to be installed!
<...>
Although MOPZ has pre-selected the technical usages, user need to be careful of the selection. It's based on guess and not exactly correct.
<...>
- From where and how do I get the dependencies between the packages (e. g. the example that CWM needs FINBASIS, SEM-BEW and SAP_APPL)
- Why does MOPZ not resolved those dependencies automatically? If I need to do that manually, what is then the use of having MOPZ?
Markus

no answer - closing thread.

Installing a new technical usage

Hello,
We have already installed EHP4 on our ERP system. Now we would like to install a new Technical usage. Should I do it again using EHPi tool, and go through all the roadmap steps? Or is there any other way to import them?
Thanks,
Ajay

Hi Ajay,
You can do it via SAINT.
Thanks
Sunny

Technical Usage Selection

Hello All,
We are upgrading our 4.7 to ECC 6 Ehp4 . Once Upgrade is complete, our next Project is Implementation of ESS, MSS.
So 2 separate landscapes,
1) Portal with EP and EP Core -for ESS, MSS :- Separate Hardware is Procured. Installation will start after Upgrade Project is over.
2) ECC6 EHP4 - AS ABAP
Now my question is,
when I am doing the Upgrade, I created 4.7 System in SMSY, went ahead for creating STACK XML file in MOPZ, I need to select Tech Usage Types.
I have selected all relevant Usage Types including HCM.
Do I need to select HCM Self Services also here? I cannot select it- it is disabled (makes sense) because it needs Portal, and my System is defined as 4.7 System.
Am I fine to go ahead without selecting HCM Self Services in the 4.7 System to be Upgraded to ECC?

Hi,
SMSY recognizes the 4.7 system as ABAP and hence the Self Services usage is disabled.
You can continue with the upgrade (stack generation) without Self service usage type as it is applicable only to the Portal system.
Later if you need the portal also to be referenced in the Solution Manager - create a system for Portal in SMSY with product version as ERP and then technical usage Self Service should be activated.
Regards,
Srikishan

Query while selecting Technical usages

Hello All,
We are in the process of implementing EHP4 SP04. The customer has provided us some Technical usages that needs to be implement.The customer wants to know the possibilities that if in future there require some more Technical usgaes which were not selected while installing EHP4 , how we can implement that new Technical Usages .
Regards
Anthony

Dear Anthony,
please have a look at the technical FAQ, chapter 4.5 and 4.6:
http://service.sap.com/~sapidb/011000358700000931872009E
Best regards,
Christian.

Additional icloud usage

How do I activate icloud for additional usage given that my ipod touch indicates that my current plan is for 15g for which I've paid AUST $21.00? Also, how do I check payment details for the same?

Try calling the Apple online store for your country. They process iCloud storage refunds and may be able to tell you. Their number should be shown at the bottom of this page.

Been charged for additional broadband usage & don'...

I have 2 broadband connections into my house. One is a BT infinity line with 40gb included & The other is an unlimited business line through another company.
We've had the infinity line for just over a year & originally the only devices connected to it were the BT Vision box, my sons ipad & my sons iphone. Mine and my husbands devices are all connected to the business broadband. We connected my sons to BT as a way of monitoring his usage but he's only 9 so we weren't anticipating huge usagev through it. Since Christmas my parents smart phones have been connected to it but they are only in our house for 2 hours every 2 weeks or so and as they are in their late 70's they're not playing games or downloading on them
On January 13th I had an email saying I was at 28gb and then on the 19th one to say i was at 36gb. I didn't think too much about it. Then on 18th Feb I had an email to say I'd used 72gb in January. I should probably have looked into it more closely at the time but I've been battling cancer so it really didn't rate high on my priorities at the time. However when I got an email on 12th April saying usage for the April was already at 28gb I told my husband to disconnect my sons devices from the BT Internet and connect them to our unlimited broadband. Despite him doing thisI got another email on 14th April saying we were at 36gb and then yesterday I got an email to say we had used 58gb in April. Struggling to understand how we can have used 22gb with no devices connected to it apart from the BT vision box and maybe one or two phones for a handful of hours.
I've spent 2 hours on live chat tonight with a very nice person in what I presume was India from his name & he sent me a day by day breakdown of my usage for the past 30 days. Interestingly it showed 3.5 gb of usage on a day that my son and I were staying in a hotel & my husband was out at work all day. This also shows usage this month so far of over 16gb with virtually nothing other than BT vision connected to it all month. The gentleman on livechat suggested someone else might be using our broadband but I'm not sure how this can happen. Other than that he couldn't suggest anything to help me resolve this issue. I am obviously disputing the additional charges I have incurred.
Can anyone help me as I'm at a total loss what to do next

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they cannot deal with service issues that way.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail, when its your turn in the queue.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Additional technical usages

Similar Messages

Maybe you are looking for