Additional values for further F4 help

Hello all,
In the current IAC WSSA_ENTRY (sales order) the parameter ~sources contains all values for the F4help; i need additional values for further F4helps;unfortunatly the parameter is fully occupied; setting a second parameter ~sources in the service is not possible.
Is there any possibility the add addionally values to the parameter ~sources? Can I add the values in the handler (ICF) to any enhancement, exit?
Thanks & regards,
Kurt

Hello Kurt,
Sorry, my suggestion is to add your customizations to a copy of the one of the existing ~sources.  Use an include or something like that.  It looks like the maximum length is 132 for the value of ~sources.
Edgar
Edited by: Edgar Chuang on Nov 25, 2008 12:38 PM

Similar Messages

  • Additional value for "Priority"  input box

    Hi Gurus,
    In the Create support message on the satellite system the defaults for priority entry only have 4 value in it. How do I add in more values for example u201C5 emergencyu201D
    Please guide
    Thank you
    Br
    Saravanan Ramasamy

    Hi,
    Iu2019m not so sure in which system I should perform the steps you mention so I have followed you steps in both SOLMAN system and also in the satellite system and the result as follows
    In both systems the new entry for the priority does not appear when I try to create a message using the path u201CHelp-->Create Support Messageu201D
    In SOLMAN system the new entry appears when I use the TCODE u201CNOTIF_CREATEu201D to create the support message. But this TCODE is not available in the satellite system.
    Please guide me on this.
    Thanks

  • Using cumulated values for further calculation in a bex report

    Hi ya'll,
    I have a problem with using cumulated values in a bex report.
    the report has three lines:
    Values 1:    100    200  300
    Values 2:    10      5     40
    Values 3:    1000  500  4000
    The values of row 3 is a formula multiplying the values from row 1 and 2... My problem is that the values of row 3 are wrong - for example 200*5 isn't supposed to result in 500 !!
    I figure the reason is that the values of row 1 is a cumulated result, meaning the <i>actual</i> value of the second column of the first row i 100 (and not 200).
    How can I ensure that my formula for row 3 uses the <b>cumulated</b> result from row 1, instead of the underlying result ?.

    Create a column structure with Actual Value columns as well as cumulated value columns. Hide Actual Value Columns from display.
    Example :
    Actual1 | Actual 2 | Actual 3 | *** 1 | *** 2 | *** 3 |
    100 | 100 | 100 | 100 | 200 | 300 |
    You can create a forumla to calculate Value 3 : (Actual 1 * Value 2 ).
    I guess you are using Cell Referencing to achieve this.

  • Predefine values for search-help of GL-Account

    Hello,
    we're using SRM on an ERP-backend. Within the shopping-site you can define the GL-Account (SAKTO) which also has a search help. In ERP i predefined the values used in the search-help (KTOPL, PLANT etc) by using a search-help exit. Now i need todo the same in SRM but i cant find the right place todo that.
    I dont even find a search-help that might be used for that. Does this work differently in SRM ? Does that all goes over the backend ?
    Could someone lease help me by telling how can i set these values for the search-parameters of the search-help and maybe also whats the name of the search-help of GL-Account in SRM ?
    Thanks alot...any help will get rewarded.
    oliver

    Hi Oliver,
    Check the Search Help BADIs below:
    a. You can use this Business Add-In (BAdI) BBP_F4_READ_ON_ENTRY to influence the display of input and search helps and to control the favorites for display fields. The processing is only available for data elements for which input helps exist on HTML templates. In this way, you can define field values for an input help and define the number of field values too.
    b. You can use the Business Add-In (BAdI) BBP_F4_READ_ON_EXIT to restrict (or augment) the list of values and favorites that are output in the input and search helps. You can only process data elements for which input helps exist on HTML templates. The following three BAdIs are also available:
    Navigate through SRM Server> Technical Basic Settings> Business Add-Ins (BAdIs)> Interface Configuration> Input Helps and Search Helps...
    Cheers.

  • Tax codes - can you set up default value for rows and freight? HELP!

    Hello - I have two issues with tax codes:
    1. When adding  a sales order if any of the rows do not have a value for "Tax Code"  I will get an error "Row without tax was found".
    - How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
    2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
    - How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
    Any suggestions?

    Hi Jhon,
    this is the simplest and best way to make a Tax Code default is Go to
    Answer for Question 1
    Administration -> Setup -> Financial ->  Tax -> Tax Code Determination (Click on this)
    in that screen you can set a default tax code for both sales as well as Purchase.
    If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
    Answer for Question 2
    Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
    Hope this helps you out
    regards,
    Shreyas

  • How to add Value Table or Search Help for a field which is on Standard SAP?

    Hi All,
        I have a field HERST (tcode IE01) which doesnt have any value table or search Help. I have the same field in a Z table which I should display for the standard screen field in tcode IE01. So Pls suggest me on this.
        Thanks in advance.
    Regards
    Jaker.

    Hi, Tamas,
    I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    The correct code is like:
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
    Xin

  • Vendor Wire Payment Including "For Further Credit" Value

    We process a decent amount of wire payments to our vendors.  We execute the automatic payment program (F110) and the wire instructions are transmitted via EDI to our bank who pays on our behalf.  More and more of our vendors are requiring we pay a bank account with instructions for a alternate/for further credit bank account and I can't find a standard way in SAP to accomodate this.
    This isn't an issue of maintaining multiple banks in the vendor master and then using the partner bank pick one bank over another but rather when we transmit the wire to the specific routing# and bank account # it also needs to have some text that states "For Further Credit To XXXXXXX" (or Interim Bank XXXXXXX) where XXXXXXX is the name the vendor gives us to put in (usually some alpha numeric value but I suppose it could differ depending on the bank we pay).
    I don't know why they can't just give us the account # they want the funds deposited in to but this is becoming more and more common place.  Currently these For Further Credit (FFC) payments are done manually through the bank's manual wire submission webpage (completely out of SAP) where we put in the bank details and populate the XXXXXXX value in the FFC field but are trying to automate it so we can initiate the wire payments out of SAP so they won't have to be manually submitted on the banks website and then subsequently clear the open vendor items against the payment.
    We thought about creating a new Text ID and assign it to the vendor so that a line stating "For Further Credit XXXXXX" could be maintained and have it passed in the IDoc but that seems a bit convoluted and hoped someone has had experience in this area they'd be willing to share.
    Thanks in advance!

    The reason why I started looking for another solution was because I couldn't figure out how to get it to work.  Admittedly didn't put a ton of time in to it but in FIBPU I did the following.
    Put in the vendor # in question for an outgoing payment.
    It lists the payment details maintained in the vendor master record.  I then double click the line shown. 
    We are paying a vendor in Taiwan USD so tried a couple things on the "Bank Chains for Creditors/Debtors" screen where on the left is the Dialog Structure and on the Right is the Recipient Bank Data with the selection section. It said this was the sender info but wasn't sure if this was the initial sender (our bank account) or the intermediary bank (the bank we pay in Taiwan who forwards it on). I entered the following records.
    Currency     BankCtryS     Bank Key S                
    USD     TW     ABNATWTP                 - This would be the bank if they didn't use a bank chain we would pay and it's in the vendor master
    USD     US     071923285 -         This is the bank key of our bank in the US that we send the IDoc to to initiate the whole payment
    I didn't maintain a Payment Method Supplement in either scenario which I believe to be ok. Initially I thought the TW bank needed to be the record entered but just tried putting in the US record and all of a sudden I'm seeing the records in REGUH I need in the fields below. So I guess the bank needing to be entered here is our bank that initiates the payment, not the intermediary bank that will forward it on.
    BNKS1                             Bank Country
    BNKL1                             Bank Key
    BNKN1                             Bank Account
    I went in to the Bank Chain Assignment and maintained the following entry.  This isn't the actual one but just for testing
    No              Type             Corr Ctry         Corr Bank Key  Bank Account
    1     3     TW     CITITWTX     00000-5135300
    Afterwards I checked our IDoc (thankfully we use the standard RFFOEDI1 program and PEXR2002 type) and see that two new data records (E1IDB02 I3 and E1IDBL2 I3) are shown and contain the CITITWTX and 00000-5135300 value.
    I am not 100% sure if the bank type is an intermediary bank (2) or a correspondent bank (3) as the vendor has requested we set them up as a "interim" bank but  in trying both options everything seems to work with the difference being the qualifier on the IDoc I2 vs I3.
    Is that it?  Again, thanks for the insight!

  • How to restrict the values for selection in the search help..

    hi,
    i have a requirement regarding screen programming. i have added a i/o field in a screen and i linked a search help for that field.
    i used the standard search help it holds some 15 values for selection...
    when i click on the  search help i m getting some 15 values for selection. but i dont need all the 15 values. i need only 4 values for selection..can any one help me regarding this...
    waiting for ur reply...
    Uday.
    Edited by: uday13 on May 31, 2010 9:17 AM

    Hello,
    Refer the below code and you can provide your own search help to a parameter depending on the value in another parameter:-
    PARAMETERS : p_belnr TYPE belnr,
                 p_bukrs TYPE bukrs.
    DATA : BEGIN OF itab OCCURS 0,
             bukrs TYPE bukrs,
           END OF itab.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
      PERFORM f4_bukrs_help USING p_bukrs.
    *&      Form  f4_bukrs_help
    FORM f4_bukrs_help USING p_bukrs.
      DATA : itab TYPE STANDARD TABLE OF it WITH HEADER LINE,
             tb_dynpfields LIKE dynpread OCCURS 0 WITH HEADER LINE,
             v_belnr TYPE belnr.
      CLEAR:   tb_dynpfields.
      REFRESH: tb_dynpfields.
      MOVE 'P_BELNR' TO tb_dynpfields-fieldname.
      APPEND tb_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname                               = 'Z_F4' "program name
          dynumb                               = '1000' "screen number
        TABLES
          dynpfields                           = tb_dynpfields
      IF sy-subrc NE 0.
      ENDIF.
    READ TABLE tb_dynpfields INDEX 1.
      IF sy-subrc EQ 0.
        v_belnr = tb_dynpfields-fieldvalue.
      ENDIF.
      SELECT bukrs from <db_table> INTO TABLE itab WHERE belnr = v_belnr.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield               = 'BURKS' "internal table field
          dynpprog               = 'Z_F4' "program name
          dynpnr                 = '1000' "screen number
          dynprofield            = 'P_BUKRS' "screen field name
          value_org              = 'S'
        TABLES
          value_tab              = itab "internal table
      IF sy-subrc NE 0.
      ENDIF.
    ENDFORM.                    " f4_bukrs_help
    Hope this helps you.
    Regards,
    Tarun

  • Search help: default value for 'Maximum no of hits'

    Hello,
    I have a request from a user to change the default value for maximum number of hits in the search help.
    Any quick hint?
    Regards,
    Michal

    Not sure if this is possible and don't have a SAP system available at the moment ...
    But check this out...
    Is there anything in user profile ..
    or check if the number of hits field has a PARAMETER ID associated with it...
    Then in that case you might default a value other than 500 in your user profile.
    Cheers,
    Ram

  • Separating values for two fields which is have same search help

    Hi Folks,
    I have one requirement like this. i have 2 fields in MM02 t-code. if i see F4 for those 2 fields it is showing 7 values in that search help. both fields are having same search help so that it is showing same 7 values for these 2 fields. but i want to separate this. if i click on the first fields then it has to show first 3 fields and if i click 2 field it has to show rest 4 fields. can any one suggest what to do for this. these 2 fields are not having search help exit and this one im doing in ECC 6.0.
    Regards..
    kanna

    Hi Rajesh,
    Your are mention related to MM02 which is standard t-code. I am not sure it is possible for that. It can be restrict through code level only..
    Regards,
    Kumar

  • Set Parameter ID Value for Search-Help S_MAT1

    Hi Experts,
    How can I set the parameter id value of Sales Organization (VKO) as default to a user that will also appear on search-help S_MAT1 (material search-help)?
    I have already set the Parameter default in SU3/SU03, used tcde SU56 and relogged-in but still not defaulting to a specific VKO in the Material Search-Help Field.
    Thanks a lot for your help!

    Dear,
    not 100% the same question. Is it also possible to exclude specific values for specific users in the standard search help? Is that possible?
    Or other / second question is it possibel in the S_MAT1 to exclude values?
    I only know how to include / select on a value but there's nothing mentioned how to exclude values or how to do a multiple selection. Is that possible?
    (Out of standard SAP desc.)
    a) Constants enclosed in apostrophes ('). The constant must be specified in internal representation for parameters whose data type has an editing mask (e.g. date and time). For example the date 01.03.1998 must be defined as '19980301'.
    Many thanks,
    Michael

  • How to get Help Values (F4 Values) for HR Infotype 22 and Infotype 337?

    Hi,
    Currently I am retrieving help values (F4 values) for different HR Infotypes using BAPI_HELPVALUES_GET bapi.
    I am able to provide parameters for HR infotype 0002(Personal Data), 0006(Address).
    The problem I am facing is, I don't know what to provide in OBJECT TYPE or in OBJECTNAME for HR infotype 22 (Education) and Infotype 337(Professional classification).
    I know, in which database help values are stored, but don't know what to provide in OBJECTTYPE, OBJECTNAME, METHOD and PARAMETER.
    Thanks for your help.
    Thanks,
    Ketan

    Does anyone have answer of this question?

  • F4 help values for currency key field in table

    Hi all,
    I have added currency and currency key fields in my Z table. For the curreny key field, i have assigned the standard data element WAERS. I have implemented Table Maintenance Generator for my table. But the F4 help values for the currency key field is not appearing when i tried to maintain table entry.
    Should i need to check the Foreign key check box for the field attribute? But this check box is in disable field in screen layout.
    Could someone tell me how to solve this issue?

    Hi,
    Make the check table of the currency field of your Ztable as TCURC,which is the master table of Currency.Inside the domain of the field you write the TCURC as a value table.and make foriegn key relationship with the TCURC table.
    Regards,
    Suvajit.

  • Purchase can be made from the app store yet I couldn't make any purchase from the game app (candy crush) directly, please kindly your help for further direction

    Purchase can be made from the app store yet I couldn't make any purchase from the game app (candy crush) directly, please kindly your help for further direction

    Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?
    No. Only apps purchased from the App Store can be re downloaded for free including updates.

  • Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Thanks rhoydotp,
    The download was actually the successful part!  I had no issues with it timing out or anything.  My problem was the actual install, after the download was complete.  The installer just stopped about a quarter of the way up on "Alternative Kits" and never made it to any of the other kits.  I think I'll try installing them one at a time like you said, and see what happens.  Hopefully it works!
    -marth3

Maybe you are looking for