Additoinal fields in Company Code Global Data

Hi
In "OBY6"- company code global data-Additional details tab is there. In this tab is there any possibility or how the fileds will be appeared here.
I need "EID number" for some of the company codes. How is it possible to add new fileds here.
with regards
Siva

Hi Daniel / Venkat
Thank you for the hint
my observtions are
1) if you use V_T001I, it will affect the country wise (SM30)
This will insert a row in the additional details of OBY6
2) if you use T001Z, it will affect the company code wise (SE16)
This will create a value in the table, but row will not be visible or created in oby6
with regards
Siva
Edited by: Siva Rama Krishna Yanamandra on Jul 7, 2010 6:44 PM

Similar Messages

  • How to make changes in company code global data

    Hi folks,
    Can some one suggest me how to make changes in company code global data (t code oby6). I want to assign 1 to co code > co Area which is blank.
    Thanks in advance

    Hi,
      actually if you want to change co code > co Area , it is under controlling (maintain controlling area), transaction code  OX06 .You change the assignment control and save it. It is automatic update you COmpany code global data.
    *give me a point if my answer solve your problem.
    Thank You.
    -akma-

  • VAT registration No. in Company Code Global Parameters

    Hi All,
    I have tried to enter the Vat registration No. for a New Zealand Company Code and i have faced the error as "Entry of a VAT reg.no.is only possible for co.codes in EC countries"
    Pls let me know config step to enter the VAT reg no irrespective of the above mentioned error.
    Thank you
    Gopi

    Dear Gopi,
    The VAT Registration No. field is reserved for only European countries, with an exception to Canada and few others.
    By system design, the VAT registration number cannot be entered via transaction code OBY6 for non-EU countries. However, the following workaround can be used to accomplish this:
    1. Turn ON the EU country switch (T005-XEGLD) in the Country Global Parameters via trans OY01.
    2. Enter the VAT registration no. in the Company Code Global Data via transaction code OBY6.
    3. Turn OFF the EU country switch (T005-XEGLD) in the Country Global Parameters via transaction code OY01. This switch should be turned OFF.
    Regards,
    Vinod

  • How to copy Company Code Account data from a client to another client

    Hi.
    In prod system, unfortunately, we have deleted all Company Code (CC) data from the system - including accounting payable data, and we need to restore data from backup. So far we have created an new 'spare' client with all restored information.
    Next step is to copy CC-related records in related tables from 'spare' client back to prod client and append them into tables were all the records referring this particular CC has been removed.
    For instance we see that the prod system is missing all CC-related records for accounting tabels such as BKPF BSEG and others.
    The questions are:
    1) How can we do this copy?
    2) If we need to do this for each single tabel manually, how can we know which tables that needs to be appended in prod system? As far as I have notised, i see this will affect table BKPF, BSEG, BSAK, BSAS, BSIK, BSIP, BSIS. Any others?
    We have allready triyed transaction EC01 for this purpose. But, unfortunately, this copy function, regarding Company Code organizational object does not seem to take into account the above-mentioned tabels which I need to restore into prod.
    I suppose this must have been an issue before for sombody...?
    So can anybody help with a strategy to solve this issue?
    Thanks.

    Just to be mentioned. This is regarding a particular CC, not all have been removed from the prod system. And I only need to restore accounting information for a spesific CC.

  • Customer-based BP role, Company Code level data

    System ECC 5.0.
    May be somebody can help me in a problem with Company code level data for BP.
    I'm trying to create new BP in custom Z role (created by me), on company code data screen I cannot set "Company Code Is Valid for Customer" indicator on company code selection dialog box.
    I use custom Z role with assigned custom Z rolecategory (with active BP-customer syncronizaton), It seems that there is a missing setting in SPRO for rolecategory that activate possibility to enter company code data.....

    After some investigation.... the problem was not in customising, but in some requirements from code: BP role should have the same name as s BP rolecategory. After renaming it goes.

  • Error while entering address details in company code master data.

    Hi Experts,
    I am getting error while i am entering address details in company code master data that is while i am creating new company code.
    ERROR: message No. AM216
                  Incomplete Address : Enter Country.
    Here eventhough i am entering country as "IN" then still i am getting error.
    Thanx,

    Yes that is right what is mentioned above, first you give the company code and name then give the currency then select address (Shift+F5) and in that if you select country as IN then it will automatically come to master data.
    Edited by: venkata986 on Aug 31, 2010 12:31 PM

  • Company code global settings

    Hi
    In the company code global settings (OBY6) when i enter the VAT registration number and try to save it throws an error as "VAT can be given only for EC_country"
    Can somebody please explain me what is this??
    Regards
    Roger

    Hi Roger,
    VAT number is only applicable to EU nations.
    Check your Company code settings, company code which you are working on may not be in EU.
    Regards,
    Kalyan
    Assign Points if helpful

  • Company Code Global Parameters

    Hi Sap Experts,
    I want to delete company code global parameters (OBY6) Whether it is possible or not.
    If Possible , Please give me the advise.
    Thanks & Regards,
    Prabhakar

    Hi,
    Yes you can change the Global Parameters only if you like nightmare....global parameters contains assignment of various objects to company code which will stop your process..
    Regards,
    Chintan Joshi

  • Variation of name field in company codes

    Hi,
       By using the script they r printing the cheques.In the cheque the the name2 field is not getting printed which consists the last name of the vendor.In some of the company codes the name2 is used for different purpose(in this case the name1 should alone be used).How to solve this issue.Please suggest some ideas.
    Edited by: saranya srithar on Jul 14, 2008 8:59 AM
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Jul 15, 2008 4:41 PM

    saranya,
    You have to write a sub routine in the SAP Script form which you are using for check printing for getting any additional data you want to print apart from the data the standard print program provides.
    Regards..

  • Company code specific data

    Hi Experts,
    In the customer master record, what data would be specific to company code.
    Thank you

    HI
    The data is categorised into General data, Company code data and sales area data. Each area have different tab pages with all the related information.
    All the tabs and fields in the 'Company Code Data' Area of customer master holds the information related/specific  to a particular company code.
    Thanks,
    Ravi/specific

  • Company Code Master Data

    Hi Experts,
    I have to implement one SD Report, in which i am loading Sales Organization Master Data into BW.
    My question is that, as Company Code is one of the attribute of Sales Organization infoobject,
    Do i have to load master data for Company Code also, even though i am not using the Company Code in my report?
    And if i have to load, is it ok if i load the CC Master Data after loading SO Master Data?
    Thanks.....

    Hi,
    In my opinion, you don't have to load CC master data before SO data load (if you don't use CC data).
    Even if you load SO data with company codes (and in the infopackage you choose an option to create master data even if they don't exist), then when the system encounters comp code it will check whether it already exists in CC master data. If not - a new record with just this code will be created in CC master data. It will work if you don't need attributes of CC.
    And when you load CC master data after loading of SO data, the existing already records with key field of CC will be populated with attributes/texts.
    So, it will work. As a side-effect - loading performance will suffer.
    Best regards,
    Eugene

  • Deletion of obsolete company codes including data

    Dears,
    we need to remove from our ECC 60 some obsolete Company Codes, as they have been moved on different systems.
    These Company Codes have been Live for some month, so we have both master data and transactional data.
    For these obsolete companies we implemented the modules FI, CO, and for one of them also MM and SD.
    We need to know if the transaction SARA is able to archive and then remove the data according the Company Code, and then to clarify if we are forced do a SLO project with Sap or not.
    In Sap BW we know there is some procedure able to delete in consistent way the data belonging to a specified company; maybe there is also for My Sap ERP 60 ?
    regards

    Carlos
    As far as I know, the standard way to delete products in APO is to flag it for deletion in ECC, the deletion flag is CIF'ed to APO and then run program /SAPAPO/DELETE_PRODUCTS.
    I dont think this would work if you have dependent data such as Transportation Lanes, PPM's etc.
    Rishi Menon

  • Mandatory field - Header text and Reference field  for company code

    Hi
    In transaction code FB60, I want to make header text and reference field mandatory at the company code level.
    For one company code , the header text and the reference field should be made mandatory but for the other 8 company codes , those fields should not be mandatory.
    if I make the fields mandatory via the document type , then it will be applicable for all the company codes using the document type.
    thanks in advance
    Kind regards
    sap student

    Hi Chintan
    I have written the validation rule and it is working fine.
    Thanks
    kind regards
    sap student

  • Hi, I want to update BSEG_XREF1 field with company code

    PLease suggest is there any FM aur BAPI.
    Thanks,
    Gaurav

    Hi,
         Write a bdc for TCODE FB02.
    Regards,
    Prashant
    Message was edited by:
            Prashant Patil

  • Creation of new company code in existing set up

    Dear All,
    we are on ECC6 having 5 company codes. Our management asked me to configure one new company code which is a dummy company means it will be having only financial entries and no other transactions will going to happen of MM/PP/SD module.
    But balance sheet should be come up from SAP only for this new company code.
    As this there is only VAT applicable to my companies , no issue of other taxes.
    Intercomapany transaction will also be there for this new comapany.
    By considering above factors , so can anybody tell me the path or way to move forward?
    your quick help will be appriciated.
    Regards
    parag

    Hi
    Configuration:
    1.     Create company ID
    2.     Create company code (copy )-(EC01)
    3.     Assign company ID to company code
    4.     Company code global data(1.posting period variant 2.assign to global data)
    5.     Assign company code to controlling area(OKKP)
    6.     Cross-company transaction(OBYA)
    7.     F110 & electronic bank statement if any
    8.     Setting default cost center &profit center(OKB9)
    9.     FA date specification
    10.     FA number range(AO11)
    11.     Allocate company code to Non-taxable transactions(OBCL)
    Then set OCA and number range:
    1.     COA
    2.     FA number range: AS08
    3.     PCA number range:GB02 if you use profit center accounting
    4.     GL number range:FBN1

Maybe you are looking for

  • Now getting runtime error when trying to get on usairways site.  Help

    This is a new occurrence in last week. Syncs iPad with no help error message still remains.  No issue with other sites. 

  • Car totalled in accident Friday, not yet discharged, will I be able to get financing?

    Hi all!  Long story short, Friday I was rear ended on highway, flipped my car a couple of times.  Car is totaled, luckily walked away sore but uninjured.  I owned car outright, no collision coverage had planned to hold onto for a while until I was di

  • Zen Micro . . a few quer

    Hello all, I'm glad to have found the forum. I've been reading through pages and pages . . . my eyes are pretty sore, but most of my issues are resolved, except a few (which I probably overlooked the solutions)By the way, I own a red zen micro, purch

  • Can't find my podcasts.

    IOS 7.1 here.  I supposedly successfully put a bunch of podcasts on my phone using iTunes on my desktop, but I can't actually find them on my phone.  They aren't in the Music app.  Where should I be looking?

  • Slackware 10.2 Zen Image

    Hi, We use Zenworks 4.01 ir7. I made myself a linux box using Slackware 10.2 because it uses the kernel 2.4.31 by default which is also the kernel for Zenworks 4.01 ir7. I use this box for compiling new drivers. I want to make a zen image of this com