Addl planning field in ME21N

dear sirs,
please let me know the importance of the field ADDL PLANNING which is appearing in the bottom part of the PO creation screen(ME21N)
just in between item tabs and po line items.
what is the importance of the same,

Hello ,
may be somewhere in the exit/badi ...its getting cleared , you need to see if any active enhancements.
regards
Prabhu

Similar Messages

  • How to add additional tab or fields in ME21n

    Hi all.
    I included some fields in EKKO table.
    I want to add these fields in ME21n, ME22n, ME23n Header screens.
    How to add?
    I can't find screen exit and user exit.
    Plz, let me know how to do in detail.
    Regards,
    nam
    Message was edited by:
            Kil Nam Kim

    Hi
    It is very much possible. Please discuss with your development team with the exact requirements. They should be able to do it with screen exits.
    Reward if this helps.

  • To get f4 help for salesperson field ,transaction me21n & me22n

    Hi Super-Techies,
    I am a new-bie in the world of enhancement.
    The reuirement here is I need to create a custom table with 1 field (prep_name). (This is done)
    Now the reuirement is that whenever user goes to transaction ME21N/ME22N, he wants me to add a f4 help for salesperson field (navigation : ME21N/ME22N -> CLICK ON COMMUNICATION TAB -> SALESPERSON). The f4 help should display the field from my custom table.
    As far as my knowledge is cond=cerned, I can use the function module 'F4IF_INT_TABLE_VALUE_REQUEST' to achieve this requirement.
    But the issue I am facing is where to write this logic and how to proceed. Can anyone help me in this case?
    Any help in this regard would be appreciated.
    Thanks & Regards,
    Vinit
    Edited by: vinit005 on Nov 1, 2010 12:43 PM

    Hi Vinit,
    I also had that requirement. There is no customer exit/BADI by which we can achieve that(as far as my knowledge), we have to use access key to achieve that. So we have gone for customer exit "MM06E005" to add Customer data tab in header and added our own fields, like Sales Person, Buyer Details etc.
    Thanks & Regards,
    Faheem.

  • Add new item field in ME21N

    Hi all,
      I want to add a new field in ME21N transaction, please tell me how to add new field in table control in ME21n tcode. I tried by using variant but according to my requirement invisible fields are not useful. I want to add a new field called MAKE with length 25 and i want to populate some text in that and need to display in related form also.
    Please guide me any enhancement technique.
    Thanks in advance,
    Mahi

    max bianchi ,
      I already seen that BADI definitions but i don't know how to achieve my requirement by using both of that.
    Please guide me the approach.
    Thanks...

  • Adding field in ME21N po header

    Hi All,
    I have added field on ME21N on header level.
    I used below screen exit
    SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
    and added fields to structure CI_EKKODB. Field is created on ME21N but table is not updating.
    can you please let me know what and where should I write the code to update the table.

    Hi Atul,
    I have added below code as adviced by you.
    EXIT_SAPMM06E_008  ( include ZXM06U37)
      e_ci_ekko = ekko_ci.
    EXIT_SAPMM06E_006 (   INCLUDE ZXM06U36)
    ekko_ci      = i_ci_ekko.
    it still not updating ekko table for these fields.
    How can I put logic in PBO even of screen 101 for enabling this.
    Please help.

  • Custom fields in me21n

    Dear Gurus  ,
    I have added some custom fields in me21n in header & item level through badi . some fields are in standard table (CI_EKPODB )
    and other are in Ztable . Every thing is working fine .
    Problam is that when i am making a new purchase order through me21n by Copying another purchase order . Custom fields are not copying .
    Example: i have a po no : 101 .
    two custom field  zabc = 123 .
                                 zdef = 345 .
    when i am making a new po by adopt(Through Document overview on) this po 101 these custom fields are not coping  .
    is there any Customizing , exit  , Enhaancement  . That can Resolve this issue ?
    Thanks in advance .
    Hemant Gulati(A1).

    Hi
    In BADI 'ME_PROCESS_PO_CUST', try with method PROCESS_ITEM to populate them with the right filters. Check if in MEPOITEM for fields REFBS and REFPS is the PO that you are copying.
    I hope this helps you
    Regards
    Eduardo

  • Add customized fields in ME21N item overview.

    Hi experts,
    Can we insert our own customized fields into ME21N item overview section.
    Pls advise.
    Thanks and regards,
    Simonksh.

    hi,
    Yes, you can do it with the help of ABAP consultant...
    Pls check whether you are providing all links to the tables for that customised field...For this all coding is required to be done...
    Also check:
    MM06E005 - Customer fields in purchasing documents
    Its an intensive work...
    Hope it helps..
    Regards
    Priyanka.P

  • Addind field in ME21n

    Hi friends ,
    I m adding field in me21n using the enhancement MM06E005  in this i m adding field in screen 0111.
    when i m going to check in me22n custom add is coming but when i m clicking custom tab a dump is coming.
    error is 'THE ATTRIBUTE SCREEN TYPE WITH THE VALUES NORMAL SCREEN AND SUBSCREEN DETERMINES THE USE OF THE SCREEN .IF A NORMAL SCREEN IS USED AS SUBSCREEN OR VICE-VERSA AN ERROR OCCURS.
    THE SCREEN SAPLXM06 011 HAS, IN THIS RESPECT AN INAPPROPRIATE SCREEN TYPE.
    PLEASE GIVE THE STEPS..N HELP ME..
    REGARDS
    YOGESH

    Hi Yogesh,
    Check the screen type of 0111 in the attribute tab. It should be Subscreen.
    Regards
    Dillip Sahoo

  • Modify fields in ME21n

    Hello All,
    I have a requirement where in I need to modify fields of me21n based on a condition:
    if the user enters a value in the field: MEPO1211-KONNR (Contract no./Number of principal purchase agreement) , then all the conditions (From KOMV table) fileds & all the Pricing terms should be disabled for change/input i.e. should be in display mode.
    I tried to search for an exit for this but could not find an appropriate one to modify screen fields however, the alternae to this requirement is :
    If the user enters a value in the field: MEPO1211-KONNR (Contract no./Number of principal purchase agreement) , then on entry of the conditions(TABLE KOMV) fields and pricing terms user should get an error message so that he cannot proceed.
    Please suggest me a solution for any of the above two requirements.
    Any help on this would be highly appreciated.
    BR
    Ankur

    Hi,
    Why dont you check with the enhancement project LO020 in CMOD.
    Hope this would help you.
    Or use the class CL_EXITHANDLER to find out the BADI used in ME21N for your requirement.
    Regards,
    Ranjith Nambiar

  • IW32  control data tab cost varaiant actaul and cost varaiant planned field

    Hi Team,
    In my preventive maintenance order , in control data tab cost varaiant actaul and cost varaiant planned field is not avialble it is hidden , but comming in PM01 order tye.
    Tcode OIAN for preventive maint. order type
    Cstg variant actual CAUFVD-KLVARI             
    Cstg variant planned CAUFVD-KLVARP
    Input indicator is selected.
    What may be the reason.
    Thanks in advance.

    Hello,
    I already ran the report Z_FILL_COSTING_VARIANTS and after that I will go to calculate costs in the order but nothing. I this order I already had confirmations but when running the cost calculation the system doesn't made the calculation.
    Can you help me?

  • Material planning field in Activity

    Hello All
    When we select activity and go in detail screen, go to assignments tab - there will be a material planning field.
    I am not able to see that field, is that a configuration , if yes where is the setting.
    Thanks,
    Karthik
    Edited by: SG_Karthik on Aug 3, 2010 1:46 PM
    Edited by: SG_Karthik on Aug 3, 2010 1:46 PM

    I have modified our network profile to include a material cost element for internal processed activities, but the material planning field does not show up.
    I checked field selections, but it's not an available field to choose, which I presume is dependent on the network profile config described above.
    Does the cost element used in the network profile have to be a specific type of cost element?
    Is there anything else I could check?
    Thanks.

  • Is it possible to change the values of fields In Me21n tansaction?

    I Have to put in some logic to change the values of already existing Shipping condition field in the SHIPPING subscreen at the Line item level in ME21n transaction.
    I searched for the user exit to do soo. Did not find anything to do this. I would like to know if it is possible through some other way.
    thanks
    shubha

    Hi Shubha!
    You might use BAPI_PO_CHANGE. Even if there would be a user exit / BADI, then execution is not sure.
    You said: 'already existing shipping field' -> exits of a transaction are only executed during maintenance, not afterwards.
    So maybe you have to make your changes completely outside of PO.
    Still have a look at BADI ME_PROCESS_PO_CUST, there are a lot of methods and one might help you.
    Regards,
    Christian

  • BADI for Disabling NetPrice field in ME21N & ME22N based of Material Type.

    Hi.
    I had a requirement to disable "net price" field while creating or changing a PO (ME21N & ME22N) based on the type of material entered.
    Please asssit me in finding the BADI or exit name which can meet my requirement. Thanks.

    Hi Ranga nadh,
       The BAdi what you have mentioned is correct.
    ME_PROCESS_PO_CUST - In this BAdi, we are having a method PROCESS_ITEM. These method is used to process all the Item data. As the field Netprice is at the level. You can use this method.
    Here inside this method we are having a parameter IM_ITEM
    So, You create a implementation and inside this method you can code here to appear the field in disable mode.
    Cheers,
    Swamy Kunche

  • Adding new field in ME21N items level NO ADDITIONAL TAB or SUBSCREEN

    Hello Gurus!!
    I have a requirement where I am just trying to add a new field ZZ*** at Item level in ME21N (and no new tabs please)
    I got the modification key and now wat i see is that in screen 1211 SAP has some field mappings with metadata.
    Refer to Include LMEMFSF0T.
    Can you please help me how sud i proceed or  wat can be an alternate way out to solve.
    regards,
    Prasenjit Singh Bist

    Hi,
         Another way of doing the same is to use screen-exits for the transaction. You can use the standard enhancement MM06E005 in SMOD for the Purchasing related custom fields. You can add the fields in the screens 0101, 0111 of program SAPLXM06 to get the fields in the tab 'Customer Data' at header level and item level for ME* transactions.
    EXIT_SAPMM06E_006 
    EXIT_SAPMM06E_007 
    EXIT_SAPMM06E_008 
                        are the function modules where u need to do the coding.
    and the fields u have added need to be included in the  includes
    CI_EKKODB
    CI_EKPODB
    of EKKO and EKPO for header level and item level respectively.
    Regards,
    Vishnu Priya
    Message was edited by:
            Vishnu priya
    Message was edited by:
            Vishnu priya

  • Grayout of  component screen  fields in ME21N transaction

    Hi experts,
       I have a problem while creating subcontracting PO i want to gray out the fields of component screen...in ME21N transaction...is it possible through the screen varient or else should i go for exit  ??...could u please help me in finding  the right procedure...........
    Best Regards,
    shanker

    Go to the screen where u want to make the changes.
    Click on System -> Status. Double click on the screen Number (like 1121).
    Then on the PBO module screen click on 'Layout'. You will go to graphical screen painter.
    Then DOUBLE CLICK on the column/field you want to gray out and on Attribute part, Program Input -> Not possible .(save + activate)
    You will need an Access Key to change the standard SAP Screen...
    Fawaz

Maybe you are looking for