Addon 9.x licenses for existing deployment

Can anyone please throw some light on Addon licenses that we need to pick for existing deployment.
Scenario: I want to migrate 1000 DLU's to 9.x for which i will pick 'LIC-CUCM-9X-ENH-B' under R-UCL-UCM-LIC-K9 bundle and I need additional 300 enhanced plus users. Do I need to pick the same bundle twice - since Cisco does not allow me to select both migration skus and addon skus under the bundle 'R-UCL-UCM-LIC-K9' at one instance.
I remember earlier we had 'CUCM-USR-LIC-ADD' bundle for 8.5/8.6 where we can select addon users - do we have any such bundle for 9.x.

Hiya,
You should indeed use the R-UCL-UCM-LIC-K9 code again for the add-on users. Below BoM for 10 addtional users based on UCL enhanced.
1         R-UCL-UCM-LIC-K9                        1
          Top Level SKU For 9.x/10.x User License - eDelivery
2         LIC-CUCM-9X-ENH-A                       10
          UC Manager-9.x Enhanced Single User-Under 1K
3         CON-ESW-LICCENHA                        10
          ESSENTIAL SW UC Manager-9.x Enhanced Single User-Unde
4         UCSS-U-UCM-A-3-1                        10
          UC Manager UCSS - 1 ENH User 3 Year Sub Tier A
5         CUCM-VERS-9.X                           1
          CUCM Software Version 9.X
6         PC-10X-STANDARD-K9                      1
          Prime Collaboration Standard 10.x
7         LIC-CUCM-9X-ENH                         10
          UC Manager Enhanced 9.x License
8         UCM-PAK                                 1
          UCM 9X PAK
9         CON-ESW-RUCLUCK9                        1
          ESSENTIAL SW Top Level SKU For 9.

Similar Messages

Installing CS3 (Volume License) for mass deployment via NetInstall (via OS X Server)

Hello.
I'm wondering if anyone has any experience using CS3 (volume license) for mass deployment? We used to manually install on machines, but as the size of the organization has grown, this has become more and more inconvenient. This summer we're planning on a complete upgrade to all systems and during this process we're doing HD formatting and clean installations of all systems and software. To make this process more efficient (as all systems are set up the same way) we're now looking into using OS X 10.5 Server, NetInstall and a cloned system image for deployment to all machines.My question is, is there anything relating to CS3 that may cause issues with this process? Does CS3 installation bind itself to the hardware it was installed on? Since we are using a volume license, I don't have to worry about individual serial numbers and activating the system with Adobe, but again, I'm unsure if installations are somehow tied into the hardware they were installed on? Ideally, I'd install CS3 onto the "master" system and run all updates prior to making the final system image. Has anyone that's done this using CS3 provide any information that may help me out?
Thanks,
Kristin.

kristin,
No one is withholding a reply from you because you're using CS3. It is just that no one who may know the answer has wandered by. The folks who help here are Adobe product users, like you.
>This summer we're planning on a complete upgrade to all systems and during this process we're doing HD formatting and clean installations of all systems and software.
My only point was that you will be spending a lot of time and effort on a setup that is centered around older, discontinued software. And my thinking is that if you are going to the time and expense of revamping your office, why not do it right and include CS4? If you install CS3 now, when you do decide to upgrade to CS4, you will be giving yourself a lot of extra work. From my point of view, the added software cost would be a good investment
during the current systems overhaul. Otherwise, it just isn't a "complete upgrade". You're installing '07 parts on the '09 Mercedes.
Neil

Licensing for mass deployment

I'm using a number of Mac minis to run kiosks and would like to have just one monolithic disk image that I distribute to all of them, for ease of administration. But how do I manage the OS-X licensing in this situation? I shouldn't have to buy any additional volume licenses since each machine came with it's own licensed copy of OS-X, but what will happen if I put the same copy on all the machines?

Hi
The Disk you use is specific to the hardware amongst other things. As long as you have disks for the rest (which you clearly will) then any one of those Installer disks can be used to create a NetInstall and/or NetBoot nbi. Assuming you're using OSX Server's NetBoot Services?
Alternatively and again if you're using NetBoot Services, you can build one workstation with all desired settings and applications, 'sys prep' it by removing the workstations local computer name and again create a NetRestore and or NetBoot nbi.
I've built a number of 'Kiosk' type environments this way (Primary Schools, Libraries etc) with no issues regarding OS licensing. You're only problem if you decide to go the NetBoot route is if the network bandwidth is capable of handling the workstations you're planning to deploy? If you don't already have it Gigabit IMO should be standard to desktop.
My 2p
Tony

Need CUBE license for Existing 3945 GW Router ?

Hi
I already have a 3945 Router that have purchased long back
Now we are planning for a SIP TRUNK to Service provider ( PSTN).
We have UC License.
As we have not purchased CUBE license earlier with router , I would like to know
if its available to Purchase CUBE License and Session License
as spare ? if its Right to Use license..how to purchase and inegrate it with existing 3945 Router ?
==============================================================

It is a paper license. You need to contact you cisco reseller to purchase it.

Additional Node License for existing cluster

Hi,
I am having two MCS servers having call manager version 8.5 installed in a single cluster. Now I have bought one new MCS server with the same version call manager and I want to add this node in the same cluster but I am having only two node license installed in my call manager cluster and that is already being used.
Please help me how can I can get the license to add this additional node in the cluster. If I have to order something then please share the part code which I have to order.
Thanks,
Shaheen Sidana

Nodes are free with version 8.5, however you need to order the free part number and receive a PAK, contact your Cisco reseller to submit the order or you can try sending and email to [email protected] to see if they can assist.
HTH,
Chris

Run-time License for Vision builder

HI
I have created a VBAI file for my inspection in, but now I want to transfer the inspection LabVIEW and build an exe to run the application.
Now for running that application do I require a NI Vision Builder for Automated Inspection Run-Time License or a NI Vision Development Module Run-Time License.
Thanks,
Ninad Regundwar
Junior Engineer | ARAV Technologies | www.aravtech.com

Instead of migrating to LabVIEW, you might want to consider automating Vision Builder from LabVIEW and running your inspection by using the VBAI API.
Check out the examples located here: C:\Program Files (x86)\National Instruments\Vision Builder AI 2013\API Examples\LabVIEW Examples.
The VBAI API allows to start a VBAI engine, open and run an inspection and retrieve images and results for each step.
When using this method, if you're running the LabVIEW program on the same machine VBAI is installed, you do not need to purchase the VBAI runtime, neither the Vision Development Module Runtime (unless you wish to process further the image returned by VBAI.
If you need to deploy that LabVIEW application on a different machine, then you'll need to purchase a VBAI Runtime license.
If you choose instead to migrate the inspection to LabVIEW, then you will need to purchase a full license of Vision Development module for your development machine (the code generated uses Vision Development Module VIs).
If you choose to build the resulting code into a LabVIEW application and deploy it on a different machine, you will need a Vision Development Module Runtime License for the deployment machine (but not a VBAI license).
Migrating the code to LabVIEW is recommended only in cases where you need to modify the code generated by VBAI. The code generated is indeed a lot more complex than using the VBAI API that I described in the first option.
Hope this helps.
Best regards,
Christophe

Does there exists a network license for photoshop elements?

Does there exists a network license for photoshop elements?

See if this helps:
https://helpx.adobe.com/x-productkb/multi/elements-13-silent-install-deployment-ccp.html

Addon Licenses for CCX 10.5

hi,
i am using CCW but i am not seeing any type of ADD-ON licenses for UCCX 10.5. Did some research and couldn't come across any either.
i need to add on 10 additional licenses to and existing deployment, but i cant seem to find add-on licenses.
all i am seeing are 5-seat bundles and 25 set bundles and i am unable to up the quantity of the 5-seat bundles to two.
i hope there is a way for add-ons
thanks,
Surendra

I noticed there aren't any E licenses though.. do you know if there is for CCX-10-A-P-LIC

RDC and Crystal 11.5 license for deployment

Post Author: Matt_au
CA Forum: Deployment
Hi,
Advised my boss that i would be able to embed the designer into a vs2005 win form and use the wizard to create reports.
runs fine on the local dev machine.
it displays a message "This system does not have a valid license, or the evaluation copy of the license has expired. Please contact Business Objects to obtain a Report Design Control License." on a test virtual machine when the wizard has completed after launching the "
Application.RunReportWizard(NewReport,Nothing)
I deployed a setup with the following modules in it.
CrystalReports11_5_NET_2005.msn, CrystalReports11_5_RDC_DesignTime.msn, CrystalReports11_5_RCR_License.msn,
CrystalReports11_5_RCR_Reportengine.msn, CrystalReports11_5_RCR_Runtime.msn
with our keycode entered where required.
My boss just purchased a dev license for the crystal 11.5 product. But has left interstate so i cant get registration help .
Any help would be usefull, can i somehow check the registry of the client machine if it has accepted the product key?
do i need a different license to use the RDC?
really need a hand with this, getting very frustrated
thanks in advance

Post Author: Matt_au
CA Forum: Deployment
Hope to get this working, will never again try integrate crystal into a software product.
support and product no different to the crystal 7 days, waste of time

The Compatibility License for AddOns

How to stop error message "The Compatibility License for AddOns will expire on January xxxxx" ?
Thank You

Billy,
Every SAP Business One client will get this message unless they download a new licence file from the SAP Portal. Your partner should be able to provide you with this. I'm afraid the new licence is the only way to stop the message.
The licence is very easy to add, you just log in to SBO, then select Admin | Licence Admin | Import Licence file and browse to the file the partner will give you.
Regards,
Adrian

Compatibility License for AddOns expired on 20080115

Hi Guys,
Just what to ask regarding this Warning Message that was encountered by one of our clients. They encounter this Warning Message. As I look at the Components Tab on the License Administration, I indeed saw that the Compatibility License for AddOns will expire on January 15, 2008.
Is there a way to correct this?
Regards,
Llowen

Hi Llowen,
I strongly recommend you go through the [Compatibility License landing page|https://websmp102.sap-ag.de/~sapidb/011000358700000768952007E] on our [Channel Partner Portal|http://service.sap.com], which addresses this issue clearly.
i quoted some statements for your quick reference:
Partner Call to Action
We kindly ask all SAP Business One ISVs and resellers to contact their customers as soon as possible, before December 17, 2007, to offer them assistance in downloading and installing a new license file. By doing so the add-on will continue to function without interruption. Please start doing this as of September 20, 2007 as the new license files will not be ready before this date.
HIH,
Chris

Compatibility License for AddOns expires

Hello everyone !!!
I have a client with Sap Business One 2005 A, when a user user log-in to the application, they got this message "module <Compatibility License for AddOns> expired on <20080115>".
I read something about that "The license key for Compatibility License for Add-Ons is limited until January 17, 2006. After this date, you must recompile your add-on with a current version of SAP Business One SDK to continue running the add-on." How can I do this, do I need to get a new License file?
My client does not use any Addon but this message bothers each time they log-in to the application.
Thanks in advance,
sbonilla
ps: I take off the Sap AddOn check mark, in the License Administration

Thanks a lot ...
Which mean that the only way to resolve this problem is getting a new license file? The vendor of my customer is not a SAP partner anymore. What can I do in this case.
Regards,
sbonilla

Difference entre Deployment License for Standard PC's- ETS RTOS et LabVIEW Real-Time Debug Deployment License

Premier question j'ai develloper suite 2009 SP1.Avec a été fourni le Deployment License for Standard PC's- ETS RTOS sauf que c'est la version Labview Real Time 8.2 Pourquoi ce n'est pas 2009 SP1 ?
Et la deuxieme question est : qu'est ce que LabVIEW Real-Time Debug Deployment License ?
Merci

Bonjour Lunik,
Merci d'avoir posté sur le forum National Instruments.
Il n'est en effet pas normal que vous ayez la version 8.2 du module RT si vous possédez la version de Developper Suite 2010 (qui inclus LabVIEW 2009 SP1). Si vous parlez bien du module LabVIEW RT, vous ne pouvez avoir une version antérieure que celle fournie avec la suite.
Si vous aviez une ancienne version installé, je vous conseille, si ce n'est pas le cas, d'installer tous les modules dont vous avez besoin depuis les disques d'installation de la Developper Suite.
Pour votre deuxième question, je vous renvois à cette page : ici.
Ce logiciel permet de déployer une licence pour faire d'un PC une cible RT.
Cordialement,
Romain P.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> NIDays 2011, le mardi 8 février au CNIT de Paris La Défense

License for addon

Hi All,
How do i make my addon specific to particular client i need a license for this addon that i create?? .. i use the UI API ... for validate some information that register on the forms.. and if i need who give me that license ?
Best Regards
Christian Carrasco

Hi Christian,
Please have a look to the thread:
Re: Addon Identifier?
or
License for my addon.
<i>... To make your addon depend on a specific license you have to use the AddOnIdentifier property in the DI and UI connections. With this mechanism your customers will be able to use your addon only if they have asked for the specific license required to run your addon. Please search in this forum, there are lots of messages talking about AddOnIdentifier and LicenseKeyName...</i>
Hope it helps
Trinidad.

UCL addon license for CUCM 10.x

Hi,
I'm creating BOQ for CUCM 10.x
I have 500 CUWL users
And I need to add some essential and enhanced users for analog and conference phones
I'm trying to add them using R-UCL-UCM-LIC-K9
But I got the following error which states you should select at least 1000 !!!
A combined total of LIC-UCM-10X-ENHP-B,LIC-CUCM-10X-ENH-B,LIC-CUCM-10X-BAS-B and/or LIC-CUCM-10X-ESS-B should be between 1000 and 10000. Please adjust the quantity.
Is there any other PN for addon license for UCL CUCM 10.x. I think it is the above one
Or it isn't possible to include UCL with CUWL !!
Also from where I could add SWSS service that UCSS will be EOS sale
Thanks

Hi
Just use the 'phones-users' tab in BAT.
... though I generally do phones/users separately.
Aaron

Addon 9.x licenses for existing deployment

Similar Messages

Maybe you are looking for