Addon connection and SAP Client running slow

The configuration of the server
IBM SERVER X3400 M3 7379-1VS
IBM 300 GB SAS HDD
IBM 4 GB RAM KIT
IBM RPS FOR SERVER
IBM CPU X3400
IBM MS ROK KIT
MS WIN 2008 SERVER R2 64 BIT
But still when my client system starts the SAP application runs very slow.
can anyone help us in the issue.

Hi,
Please try the following:
1. Try to set the Add-on loading to Manual, lets try running the program without the Add-on and
lets try to compare the slowness of both scenario and observe if the add-on is the cause of the problem.
2. Is your Application and Database Server are same machine?
Much better if you separate them.
3. Running add-on requires more RAM 4Gig is not enough.
4. What is your SBO version and patch?
5. Try to view in the resource monitor which process takes big consumption of your resources.
Thanks.
Clint

Similar Messages

Im using a Macbook Pro, running a Mac OS 10.6.8, with 400GB free of space and it is running slow. It takes 10 minutes to start up and things like that. What should I do?

Im using a Macbook Pro, running a Mac OS 10.6.8, with 400GB free of space and it is running slow. It takes more than 15 minutes to start up and things like that. I cant seem to do anything as it is so slow. The 'beachball of death' is also present during start up. What should I do? Please help

Try these two steps first.
Get the Original Installation disk and boot the MBP holding down the C key. When you get to the point where you see a menu bar on the top of the display, select UTILITIES. From the drop down menu select DISK UTILITY>FIRST AID. Run verify and repair.
See if there is any improvement.
Try a Safe Boot:
http://support.apple.com/kb/HT1455
This might indicate that third party applications are an issue.
Ciao.

What is SAP Bank Analyser, SAP Limits Monitoring and SAP Client Hierarchy

Hi Experts,
Could you please breifly explain functionality of
SAP Bank Analyser,
SAP Limits Monitoring and
SAP Client Hierarchy in BI 7.0

http://help.sap.com/saphelp_bankanalyzer50/helpdata/en/f9/cdc23b95c8cb6fe10000000a114084/content.htm
http://www.sap.com/industries/banking/pdf/BWP_SB_Limit_Management_REV.pdf

What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

What's the go with this latest update. Half my apps don't work and the iPad runs slower? How do I go back to the old operating system?

Make sure your apps are updated. You might try Settings > iTunes & App Store > Automatic Downloads - Updates = "On".
You cannot go back to an old operating system.

I have a mac book 10.5.8 and it is running slow any ideals?

i have a mac book 10.5.8 and it is running slow any ideals?

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.

I have reset firefox earlier today and its still running slow what do I do.

Firefox is running slow and I can't get it to improve any. So what can I do.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Downloaded the new Lion software and now Mac runs slow. What went wrong?

I downloaded the new Lion software and now my Mac runs slow. What did I do wrong?

That didn' t fix it for me. and I also repaired and verified disk permissions that didn't help. So how do I do the next steps? Can you lay it out slowly for me please?
if that doesn't fix your slow down open disk utilities
-repair and varify disk permissions
-reboot and hold comman-R
-open disk utilities once your on your recovery partition
-repair disk and verify disk
-reboot and you imac should be running at tip top shape
if that doesn't fix your slow down open disk utilities
-repair and varify disk permissions
-reboot and hold comman-R
-open disk utilities once your on your recovery partition
-repair disk and verify disk
-reboot and you imac should be running at tip top shape

Upgraded to Firefox 14 today and immediatly was running slow like I was wiht 12. On the other hand 13 betsa ran like a champ. Any ideads?

Firefox runs painfully slow. I upgraded from 12 to 13 beta recently and the problem went way. With 14 its just like before

I had the problem with FF 14 develop when I went from XP to Windows 7 Pro. I tried every fix in the forum plus uninstalled it using Revo Uninstaller and did a clean install, nothing worked. Then I said to myself "duh" and right clicked on the FF desktop icon and ran a compatibility check. Windows said FF 14 was not compatible with Windows 7 and is now running FF14 in the XP mode (a feature of Windows 7 Pro). It works fine now.
What is odd is that I have 2 other computers running Windows 7 Pro but FF 14 runs fine in Windows 7 on them.

Integration of Adobe Connect and SAP Enterprise Portal

Hi All,
Is it possible to integrate Adobe Connect with SAP Enterprise Portal?
If so , how it can be done? Provide me with some details , links and materials.
Regards,
Eben.

HI,
Yes, this is Possible. You can use AppIntegrator Iview and Pass the URL for your Adobe Connect.
Thanks and Regards
Puneet

To kill a connection (and the thread running it)

As a last resort to deal with potential hanging in the DB (Sybase), I'd like to
find a way to stop the processing. I'm willing to violate some rule, such as calling
Thread.stop. But that doesn't seem to drop the connection. Any suggestion how
I can drop that connection? Thanks. /Bill

Joe, as you know I also posted at Sybase/jdbc. I'm reposting the last post here
for the benefits of anyone else might be interested in the thread.
I tried out cancel and it essentially did the same thing as set timeout, except
the time is more precise since the application controls it. Set timeout is more
economical to operate though. I'll probably take one of these, which do solve
half of the problem, for the time being until something better comes along. Unfortunately,
though, the other half causes more problems because when that happens, other executions
will pile on and get blocked as well.
Joseph Weinstein <[email protected]> wrote:
>
>
Bill wrote:
As a last resort to deal with potential hanging in the DB (Sybase),I'd like to
find a way to stop the processing. I'm willing to violate some rule,such as calling
Thread.stop. But that doesn't seem to drop the connection. Any suggestionhow
I can drop that connection? Thanks. /BillKilling the thread is bad for the server, because it only creates a fixed
number of
execute-threads to do user work... The things you should try are:
1 - Call cancel() on the jdbc statement that is hanging. Call connection.close()
on the connection. This requires having access to those objects from
another
thread.
2 - Find out the spid of the hung DBMS session (either record it ahead
of time or
query the DBMS with another connection) and use T-SQL to kill that DBMS
session.
3 - Try resetting the pool.
Joe

Addon connection to SAP B1 8.81 PL 9 error

Dear all,
I can not connect my add On from VB6 to SAP B1 8.81 PL9. The error message in SAP B1 is
Connection Error -131 connection to license server failed; if license server address is invalid,correct it; if Tao NT Naming Service stopped,active it and restart license manager.
I check the service and already running. This happen only in PL 9 after i upgrade from PL 4 to PL 9. i also run the add on in PL 4 and it runs well. Did i miss something in PL 9 ? or is there bug in PL 9.
Thanks in advance
Regards
KK.

Hi,
I already follow the step in this thread.
But does not work.
I also already close the firewall, antivirus that i use.
At the same time if my add-on is running using vb.net it works fine.
But when the add-on is running in VB6 ,it can not run from VB6.
Fyi , the VB6 source code is running well from SAP B1 2007 to 8.81 PL4.
Now i still consider if i must upgrade to PL9 or not. Because most of my old add-on is still write in VB6 for the compiler.
Thanks in advance

Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.

I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

Safari and Google Chrome running slow on my MacBook

Hi there!
Over the last couple of weeks Safari (and Google Chrome) have started running very, very slow on my MacBook(I own a MacBook white, OS X version 10.6.8). I didn't install anything new over the last few months, so I don't think that is the problem. My Wi-Fi has been checked and that's not the problem either. Also, I emptied my cache and reset Safari, yet nothing seems to help.. Sometimes I even have to Force Quit Safari because it just stops working all of a sudden and it blocks my whole computer for over a minute. Anyone out there that can help me?

Except for Facebook?
Try the following:
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

AddOn, DI and SAP Patch

Hello,
I'm still in development mode for an Add On, but I have a question when it will be released.
Each time there is a new SAP Patch (now it's PL18), you have to install the new version of the DI.
If I make a released version of teh add-on, it will have the DI version of the current patch on my computer.
If the customer has a earlier, or older version, it won't work.
Does this mean I'll have to create a new release version of my add on for each PL of SAP ?

It's what I thought too, but there is the problem
I'm on PL18, I use VB .Net.
I generated my solution and give the "bin" folder to somebody whith PL14.
This bin folder contains my .exe, and both dll UI and DI
The solution can't be started on it's computer, there is a COM error.
Is there something to do when I add the referene of the DI and UI to tells the program not to use the interop dll of the solution but the one installed on the client ?

Sys number and SAP client diff

Hello,
I have basic doubt regarding XI client and System Number. Actually when i installed XI, i have given I remember CI instance number as 01.
So, i can access 001 client for XI using SAP GUI. And also, my j2ee engine i can access with http://host:50100/
When i see my customer's landscape, SAP gui access is same as 001 client.
But, system number is 15.
Where do we specify system number in order to access my j2ee engine with 51500.
Thanks,
Srinivas

I'm sorry about the misunderstanding. Are you saying that you are about <b>install</b> XI and you want to know where you supposed enter the system # so that you can access the J2EE engine or Where do you enter the system # during <b>J2EE configuration</b>?
regards
tamilboy

Addon connection and SAP Client running slow

Similar Messages

Maybe you are looking for