Addon installer does not get installed when running BIDE setup

Hi all
i've download BIDE version 1.3.
After running setup the installer projects for VS2005 does not appear in the VS2005. any ideas what could be causing the problem?
appreciate the help
Yoav

I have the same problem,
pls visit the post:
Re: B1DE & B1TE for Visual Studio 2005 and .NET Framework 2.0

Similar Messages

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Names.exe does not get installed when installing oracle

Hello Group,
I have installe Oracle 9.2 server on a Windows 2000 SP 4 machine and am configuring this as an oracle names server. The configuration is succesfull, however the service cannot be started 'coz the service is configured to execute the files names.exe from the folder c:\oracle\ora92\bin\names.exe.
However, i have searched twice but this file does not exist on the server. I am not sure if i am missing something.
Any help would be appreciated.
Thanks and Regards,
Ashish

Hello Ashish,
I've got the same problem after installation Oracle 9.2.0.1 for Windows.The file names.exe was missed.
And what is more I installed twice this product and in both cases I could find names.exe in bin directory.
May be I have to set special option for Oracle Names before the installation.
Did you resolve this problem?
Thanks for help.
Andrey

OKI 5500n driver does not get installed......

I tried it on Macbook Pro intel and MacPro xenon.
in os 10.5.3 the printer just stopped working!!!
When I install the new driver from oki.com It appears that is is getting installed properly but I can not find the driver. I created a separate folder but still does not get installed!!!!
Please help!!!

I just got this working, after calling Okidata at 1-800-oki-data as someone suggested. I had tried installing all the drivers from the oki web site which apparently was not the best thing to do.
The final procedure that worked was:
1) Move Library/Printers/Okidata folder to trash and empty trash
2) Move all other folders in that Library/Printers directory, EXCEPT for PPDs) to a temporary directory on the desktop
3) Reboot
4) Install OSX5C5500E driver
5) Open System Preferences/Print&Fax
6) Click + to add a a printer
7) IGNORE THE OKI PRINTER THAT APPEARS THERE
8) Select "More Printers"
9) Under Oki USB, a printer driver will show up - choose that one.
10) Print - it works now!
11) Move other printer drivers back into Library/Printers
12) Enjoy using Okidata printer rather than buying lots of HP ink.

Tried syncing entire music library to ipod but some albums were skipped. tried click and drag album but device does not get highlighted when i drag album there. any suggestions?

I tried syncing entire music library to ipod. some albums were skipped. tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod? the album is imported and not purchased thru itunes store.

Does it play in iTunes on the computer? What is the format of the album?
Right click and select Get Info. Look under File in iTunes 12

Workflow initiator does not get workitems when PR Approve rejects.

Hi,
Workflow initiators does not get workitems when PR Approve rejects.Is there any thing missing in that .
Please let me know .
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Jan 28, 2009 8:38 AM

Hi GB,
In order that the WF initiator gets workitems on PR rejection, you need to assign method 'InfoReleaseRejected' (BO BUS2009) to a task in the PR rejection flow of your WF. If this is done, then check if you have assigned WF Initiator as the Agent in that task.
Hope this helps.
Thanks,
Ajay

Applet does not get loaded when viewed in a browser

Hi,
I have an applet,which works fine when I use appletviewer to see it. But from the browser, the applet does not get loaded.
An error appears at the bottom of the browser that load: class not found.
Any suggestions...please..
Thank you....
Pooja

If you are using Internet Explorer, you should check to see if your browser is set to use Sun's JRE that came with your download of the SDK. (If you didn't install the JRE, you need to go back and run that on your machine. You can check to see if you are using Java's runtime enviornment (JRE) in Internet Explorer by opening IE and going to Tools --> Internet Options... --> and then going to the Advanced tab. Scroll down and make sure the box next to Java Sun "use Java 2 for <applet>" is checked. If that option is not available, you need to install the JRE.
If that doesn't help, try using the HTML converter that comes with the SDK. It'll take your current HTML page, and you can customize it to force a download and/or usage of the JRE for applet viewing if for your particular browser.
Hope one of these helps!

Photoshop Elements installation failed: Installer does not support install on a 64-bit operating system

Purchased Photoshop Elements 13 from Adobe through Amazon as a download. It said one of the requirements was a 64-bit operating system. Okay. Downloaded fine. I have a Dell Inspiron 15 with a 64-bit processor. Initialized Adobe installer, put in serial #, pressed install. Installation failed: error msg - Installer does not support installation on a 64-bit operating system. Please download the 64-bit version of Photoshop Elements. Help.

download the 64 bit installer
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Recently I cannot view certain attached videos because I need the adobe flash player. It does not get installed and the system says it will do so once firefox is closed. pl.help

recently certain video or pictorial attachments to my e-mails be opened because the system requires the installation of the Adobe Flash player with Java plug-ins. The message also gives a link for installation. It appears to install but nothing really happens. Then the message advises that it will install automatically once security is uninstalled or when Firefox is off. Nothing seems to work. Please help. P.S. I recently also installed the Firefox 4.0 version also

1.Download the Flash setup file from here using Firefox: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Shutdown hook not getting called when running tomcat as a service

I have a shutdown hook as part of a lifecycle <Listener> tomcat6 class, which gets created and registered in the class's constructor (class is referenced in the server.xml). The hook gets called during shutdown when tomcat has been started from a shell, but not when tomcat has been installed as a service. The -Xrs flag doesn't make a difference either way. I am running java 6u12 server VM (haven't tried client) and prior versions. Does anyone have any ideas? This has been tested by starting/stopping from the Control Panel, and also with 'tomcat6 //TS/ServiceName' (i.e. in test mode)
One possibility is that tomcat internally calls Runtime.halt(), but the shutdown process appears to be normal and the same with either scenario. The other possibility is that the JVM has an issue. The tomcat user groups don't have anything to offer.
Thoughts?
tia

sanokistoka wrote:
jschell wrote:
sanokistoka wrote:
Let me ask the last question in a better way: Does anyone have any GOOD ideas?Get back to us when you have found your good solution.Stop wasting bandwidth. I didn't post here to be a smart ars like you and pretend that I have a solution to a rare problem... FYI - the workaround is to use the tomcat lifecycle events (AFTER_STOP_EVENT) to achieve the same - why do you think I mentioned it's a tomcat listener in the first place? Feel free to educate me.
So you are claiming that Runtime.getRuntime().addShutdownHook() that you posted in the above is not part of the java API?
Or perhaps that everything that is added via addShutdownHook() runs?
Surely you are not claiming that it isn't calling addShutdownHook() in the first place?
Get a life and a job.I have both but thanks for the concern.
sanokistoka wrote:
swamyv wrote:
There are free tools available to debug windows. I think gdb is one of them. If you search you can find some good tools.
If you find any good tools that you like share it with us.
Yes I will try gdb (have cygwin) and see where this takes us - not sure if the JVM or tomcat6.exe have the symbols to get a meaningful stack trace. As luck would have it, [https://issues.apache.org/bugzilla/show_bug.cgi?id=10565|https://issues.apache.org/bugzilla/show_bug.cgi?id=10565] claims that "shutdown hooks are not supported in a container environment" although there is no such restriction in the servlet spec, which would make this a tomcat issue (it does sound like that tomcat6.exe wrapper is somehow involved). Unfortunately, tomcat does NOT issue the AFTER_STOP_EVENT if killed before it has completed its start-up (it appears its own shutdown hook, which sends the event, is not registered until it has fully come up); thus the need for a shutdown hook (at least, up until it's fully up). A shutdown hook is still required in my case for clean-up after tomcat is completely out of the picture. It sounds like the proper architecture here is to really embed tomcat in an application, and create a shutdown hook at the outer level.
Educate me some more. The above description certainly seems like you are suggesting that both of the following are true.
1. It is not a bug in the VM.
2. The problem, for your implementation, is in how the wrapper terminates the windows service.
Perhaps what is actually happening it that addShutdownHook() is never being called at all? Thus of course any processing of the thread associated with that would never, ever run.
And that happens because you are banging on the stop service so fast that it doesn't actually have time to spin up?

BDC-Not getting inserted when run in 'Display errors- (E)' mode

Hi,
I am doing a BDC for FS00 transaction through Call transaction method. The data is getting inserted into the table when i run the BDC program screen by screen through 'Display all screens - (A)' mode and is not getting inserted into the table when i run the BDC program through 'Display errors- (E)' mode.
What could be the reason for it?

If you have defined a non-existing screen or field, and error will rise and the transaction will be stoped....
When your working on 'A' mode, you need to perform an extra "Enter" button press to get rid of that problem....So you better check your Batch catalog and add some "Enter's" when need it -;)
Greetings,
Blag.

Complete data not getting returned when running IIS (v7.5) commands remotely.

Hello All,
I searched quite a number of forums before posting and all that I have come to know is that some have mentioned it to be related to COM. I do not have experience dealing with COM and no idea how I can sort this out. I hope someone can provide guidance on
these:
Question 1: Server (2008 R2 Standard) is having 4 websites. Default - Running, WS2 - Stopped, WS3 - Running and WS4 - Running. When I run the command "invoke-command -computername Server1 -Credential domain\User -ScriptBlock
{import-module 'webAdministration'; get-website}"
I get this output and then an error:
name : Default Web Site
id : 1
serverAutoStart : False
state : Stopped
bindings : Microsoft.IIs.PowerShell.Framework.ConfigurationElement
PSComputerName : Server1
RunspaceId : ca8bbb00-4631-4c92-a7c7-3bec8039eaee
Attributes : {Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute,
Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute,
Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute,
Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute}
ChildElements : {Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement,
Microsoft.IIs.PowerShell.Framework.ConfigurationElement,
Microsoft.IIs.PowerShell.Framework.ConfigurationElement,
Microsoft.IIs.PowerShell.Framework.ConfigurationElement...}
ElementTagName : site
Methods : {Microsoft.IIs.PowerShell.Framework.ConfigurationMethod,
Microsoft.IIs.PowerShell.Framework.ConfigurationMethod}
Schema : Microsoft.IIs.PowerShell.Framework.ConfigurationElementSchema
The data is invalid. (Exception from HRESULT: 0x8007000D)
+ CategoryInfo : NotSpecified: (:) [Get-Website], COMException
+ FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.IIs.PowerShell.Provider.GetWebsite
Command
What I have been able to figure out is that it returns complete data for the Default Website and then throws the error. Tried the same command on another server running 2 websites (both in started state) and same results :(
Question 2: When the same command "Get-Website" is run locally on the server then only 5 columns show by default; Name, ID, State, Physical Path & Bindings. Why then the command when run remotely returns slightly
more data?
PS: I have Win7 x64 on my desktop. Tried the commands from x86 as well as x64 shells and same results.

Hi Yan,
When I use Enter-PSSession, it works in the same manner as if the command is run locally. Hence the same output as local.
I am not sure of the exact way to use [Reflection.Assembly]::LoadFile('C:\Windows\System32\inetsrv\Microsoft.Web.Administration.dll')
I tried this and get an error:
invoke-command -Session $session -ScriptBlock invoke-command -Session $session -ScriptBlock {[Reflection.Assembly]::LoadFile('C:\Windows\System32\inetsrv\Microsoft.Web.Administration.dll'); get-website}
Output:
GAC Version Location PSComputerName
True v2.0.50727 C:\Windows\assembly\GAC_MSIL\Microsoft.Web.Administrati... Server1
The term 'get-website' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the
name, or if a path was included, verify that the path is correct and try again.
+ CategoryInfo : ObjectNotFound: (get-website:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
+ PSComputerName : Server1
The version of the dll on the server is 6.1.7601.17514
Thanks

The field point 4.1 software does not get installed, how to install the software and work on field point 20xx

We want to know the basics of installation of field point s/w and where to start from after installation.
Then we also need the details of HOW TO WORK in it. what are the other hardware and software that are necessarily to be installed along with field point in the PC. How to connect the hardware fp2000, to the PC.
Actually we tried installing the field point s/w, but we did not get the field point explorer icon to continue working.

Hi.
You can find informations in the NI Developer Zone (Distributed I/O -Fieldpoint)
http://zone.ni.com/devzone/devzone.nsf/webcategories/67EFA8729F4A7741862567E1006EDA74
and here for the Basics:http://zone.ni.com/devzone/conceptd.nsf/webmain/2124F6BBD29663D886256CB80054DBD7
Configure your fieldpoint in MAX.

Sender File Adapter does not get files when there is a large number ( 300)

We are on XI 7.0 (SAPKB70015)
We have an issue picking up a large number of files from a particular server. We are trying to pickup the files based on a wildcard e.g. test
- we can retreive up to 200 files from the same server (using the same config) no problem
- we can pull lots of files (>3000) files from other servers (using the same config) no problem
- we can write an mget command (mget test) to reteive the files no problem
So the only issue is retrieving a large number of files from a parfticular server. We see no errors in the RWB.
To get this sorted out we need to find the exact commmands that XI executes to attempt to retrieve the files. Can anyone point me in the right direction on how to find this.
Thanks
Richard

It turned out that this was caused by a limitation on the ftp server.
The file adapter uses the dir command to get a listing of the files matching a specific mask. The dir command does not return any files if there are a large number (the ls command works fine but the file adapter uses dir instead of ls).
sap told me that 'According to this FTP server is no compliant with RFC 959 and that is
why DIR command returns an error.'
We were able to get this resolved by applying a patch on the ftp server.
Thanks
Richard

"Message Processor" does not get assigned when saving the document.

Hi folks!
When creating a support message (SLFN) and saving the document usually the BP of the current user got assigned to the partner funtion "message processor".
This used to work but does not anymore. Now I cannot find the reason why.
I think I could achieve this via customizing "Make Settings for Change Transaction Types" and using "Specify Copy of Current User" but I am pretty sure this was not customized before.
I could use partner determination procedure, too. Access sequence "User" but still I am not sure this was customized before.
I am using SLFN transaction type service provider scenario (SLFC0001)
Anyone got an idea?
Thanks in advance.
Regards
Edited by: Christian Kaunzner on Mar 25, 2009 5:15 PM

Hi Christian,
did you solve this issue on your own? can you share your experience?
thanks
Pedro Rodrigues

Addon installer does not get installed when running BIDE setup

Similar Messages

Maybe you are looking for