AddOn installer with InstallAware

Hi all!
I want to know if it´s possible to generate the ard file with the InstallAware Studio 7 program.
Thanks.

Hi Alvaro,
The ARD file cannot be created from such 3rd Party softwares, So when working with 3rd party install creation software We need to create the .EXE alone and then use this EXE in creating the ARD using the AddOnRegDataGen.exe
Hope it helps,
Vasu Natari.

Similar Messages

  • SAP Business one 9.0 AddOn installer error

    Hi Experts,
    I have upgrade my SAP B1 from 8.82 to 9.0 PL 5. I have an addon also which is I compile with 9.0 DLLs. it is working fine if I direct connect by visual studio 2010 to any client 32-bit or 64 bit. But When I make an .ard file using B1DE 2.2.6 . it gives me error '"BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)". I use the following steps for make an addon.
    1. Run Addon Installer Wizard and follow all steps.
    2. Change Compile -Advance Compile option -Any CPU.
    3  Rebuild again project.
    4. Rebuild ard file by clicking on batch file
    Please suggest where is the gap. It tried to install on both client 32 bit or 64 bit, but it gives me above error.
    Thanks
    Regards
    Jitender

    hi Kerremans,
    Thanks for you quick reply.
    I try to compile my installer with 86x .Now it gives a new error EndInstallEx return -2. Please what is this new error.
    Thanks
    Regards

  • B1DE (AddOn Installer) for 64 bit server

    Hi All,
    I have a problem. One of my client has a 64 bit server. AddOn installation created with B1DE for SAP 2007 doesn't work on that server. After running SAP AddOn is trying to install, and then there is an error. Is there any way to create AddOn installation files that work on 64 bit server?
    Regards
    Hmg

    Both Robin and Owen are right... You need to run your code as forced 32 bit.
    The reason is the following:
    - A default project in Visual Studio is compiled as "Any CPU"
       - Any CPU means that you code will be executed as 32bit on a 32bit machine, and 64bit on a 64bit machine.
       - The Any CPU option is great for pure .NET (since all parts of it can run 32bit and 64bit)
       - In case of the SAP SDK and the AddonInstaller.dll, these are COM-based unmanaged code
          - If such unmanage code is not written to work with 64 bit, problems like yours can occur (this happens not only for SAP SDK... Tons of API out there have the same problems)
    - If you change the Any CPU option to the x86 option, you will force 64 bit mashines to run your code in "simulated" 32bit (Don't worry.. it is quite fast and gives no problems)
    We are you this with our 64 bit customers and without any problems...
    Lastly, if you wish to know more about this please hear the following podcast that describes the issue in detail (A good listen): http://www.dotnetrocks.com/default.aspx?showNum=341
    /Rasmus

  • UI addon installation

    Hello,
    I would like to install sap fiori on our ECC6 EHP6 system, but I'm stuck with installation of UI addon.
    Tx SAINT requires stack.xml for addon installation, but I cannot get it.
    I tried to follow this note 1666368 - Installing UI add-on 1.0 for SAP NetWeaver
    ,but there is no more MOPZ transaction in solman 7.1, this is what is written in note:
    In the "Select Add-Ons" section of transaction MOPZ, select the product version "UI add-on 1.0 for SAP NetWeaver".
    I don't know where I can find Select Add-Ons section, all I can do is maintenance (SPS installation) or EHP7 installation...
    Could you help me out?
    Regards,
    Martin

    Hello,
    my system is on NW 7.31:
    I found this KB article: 1834030 - Targeted instance ... is incompatible with NW 7.3!
    ...which should solve my issue, but it did not help.
    My CR/CIM versions are latest (updated last friday):
    Landscape verification was done few minutes ago with no error:
    So I withdraw-ed old maintenance transaction, created new one, but it ended with exactly same list of error messages...
    Have no clue how to proceed...

  • Error : "Wrong Digital Signature for Addon Installer"

    I'm having some problems at the time of installing any kind of addon in sap B1
    Everytime I'm having an error -
    "Wrong Digital Signature for Addon Installer"
    even when I'm adding SCREEN PAINTER

    Hi
    This error could be cause by a versioning or corrupted installation:
    1. For the version please check if you have another add-on installed with the same version like 2.1.2 (try to change it add-on file and try again)
    You can also try to change the add-on installation order (in case of you have another add-ons installed).
    2. If checking the version does not help please check those notes on How to clean client after corrupt installation of addon and also Re-registering the UI.                                                                               
    808354 UI Server is not loaded with SAP Business One client        
    819501 How to clean client after corrupt installation of addon     
    Paulo Calado
    SAP Business One Forums Team

  • Restrict Customised Addon Installation (Usage)

    Hi All,
    I have done the development for our one of the clients requirements. We are going to install the same in the client location. Actually we want to restrict the addon installation to only one server i.e., subsequently that addon shouldnt be used by some other company, it could be even their sister concern.
    Is there any way to restrict the addon installation? Is there any way to do through coding without getting SAP Licencing?
    Please clarify.
    Regards,
    SAPB1Use.

    Hi János,
    I feel your solution will work well. And one more clarification. I thought of giving the same Addon to other companys who are in Same Industry. But I want to restrict their use for 15 days only. I can capture the Addon Installation Date & I can compare the same with the Current date. By this logic, I could control.
    But actually, I want to restrict 2nd installation of Addon in the same server. How I can go ahead with that. I have one logic in mind, please tell me that will work or not.
    I will capture the System name in any of the system table while installing the Addon for the first time. In the 2nd installation, I will cross check the System Name. If it exists, I want to restrict the installation.
    My query is that, where can I restrict whether in installation of Addon or while opening the Customised screen.
    Please clarify.
    Regards,
    SAPB1Use

  • Oracle 10g R2 installation with ASM+RAC

    Gurus,
    Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
    We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
    ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
    The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
    1) Install CRS
    2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
    3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
    4) Create ASM database using DBCA -
    5) Use dbca to create database.

    Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
    They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
    I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
    http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

  • Multiple independent devices on Single installation with independent monthly rental charges

    Hi Experts,
    4 Independent single register based devices installed (Tech+ Billing) in a single installation with same time slice. There is only monthly rental charges for each independent meter. No meter reading required and NO consumption charges. I believe we can do this scenario. Can anybody advise for any consequences?
    Note: number of devices can change from 2/3/4.

    Hi,
    How are you going to satisfy the meter read orders to make it billable without entering the meter reads? If you do not need any meter read, can't you use any flat rate / time dependent prices? The amount output will be same but you will not be using any settle* variant program. You may use any Lumsum* variant program. If you do not use the devices for entering meter read, do you have any requirement of installing the devices with the utility installation?
    Thanks.
    Nirmalya

  • How can i change alternative apple id to my apple id to update software that installation with alternative apple id?

    hi, my software for example games , installation with another apple id and i want to update software but i cant , how can do this change ? i should go to itunes store to do this change or i cant at all?

    you can change your apple id or password etc here http://www.apple.com/support/appleid/
    Good Luck
    Matthew

  • Error in installation with NW04S

    Hi,
    error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
    i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
    Thanks & Regards
        kiran.B

    Hi,
    Assign the Role  <b>SAP_BC_JSF_COMMUNICATION_RO</b> to the profile of SAPJSF user in production client and restart the installation.
    Regards,
    Siddhesh

  • SAP R-3 IDES 4.71 installation with Oracle9i

    Hello
    I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
    INFO 2008-05-14 22:50:30
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-05-14 22:53:59
    See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
    TRACE
    ProgramReturnCode='-1' means error.
    ERROR 2030-05-14 22:53:59
    MOS-01012  PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
    Windows 2003 Server
    AMD 2GH Dual core
    2GB Ram
    250GB HDD
    Computer name: bw2003
    Central instance: DEV
    I checked the host file system32/drivers/etc the IP adress and the host name is there.
    I am hoping  that someone could help me with the installation  thanks in advance.
    waiting .....

    ok here you go
    dev_disp
    trc file: "dev_disp", trc level: 1, release: "620"
    Sat May 18 00:27:08 2030
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        2276
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          9776     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 042F0040, size: 1974816)
    DpShMCreate: allocated sys_adm at 042F0040
    DpShMCreate: allocated wp_adm at 042F0560
    DpShMCreate: allocated tm_adm_list at 042F2B90
    DpShMCreate: allocated tm_adm at 042F2BB8
    DpShMCreate: allocated wp_ca_adm at 0448F878
    DpShMCreate: allocated appc_ca_adm at 04493EC8
    DpShMCreate: allocated comm_adm_list at 04495638
    DpShMCreate: allocated comm_adm at 04495650
    DpShMCreate: allocated ca_info at 044C4450
    DpShMCreate: allocated wall_adm at 044C4458
    MBUF state OFF
    Sat May 18 00:27:09 2030
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
    <ES> 306 blocks reserved for free list.
    ES initialized.
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c      2599]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1451]
    Sat May 18 00:27:18 2030
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    Sat May 18 00:27:32 2030
    CCMS: start to initalize 3.X shared alert area (first segment).
    Sat May 18 00:27:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    Sat May 18 00:27:50 2030
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:29:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W0 (pid 2328) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 2416) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    my types changed after wp death/restart 0xbf --> 0xaf
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:30 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W5 (pid 2368) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W6 (pid 2376) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W7 (pid 2384) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    my types changed after wp death/restart 0xaf --> 0xad
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W2 (pid 2344) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    ERROR => W8 (pid 2392) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W10 (pid 2408) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    ERROR => W12 (pid 2424) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    my types changed after wp death/restart 0xad --> 0x89
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:30:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W1 (pid 2336) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    Sat May 18 00:30:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:30:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W3 (pid 2352) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W4 (pid 2360) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W9 (pid 2400) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    Sat May 18 00:32:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:51 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:33:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:11 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:13 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:33 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:37:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:30 2030
    caught signal 2
    Sat May 18 00:40:42 2030
    ***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c   7883]
    dev_w0
    trc file: "dev_w0", trc level: 1, release: "620"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Sat May 18 00:27:19 2030
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
    B  Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
    B  New connection 0 created
    M  systemid   560 (PC with Windows NT)
    M  relno      6200
    M  patchlevel 0
    M  patchno    674
    M  intno      20020600
    M  pid        2328
    M 
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c   1028]
    I  MtxInit: -2 0 0
    M 
    M Sat May 18 00:27:24 2030
    M  DpShMCreate: sizeof(wp_adm)          9776     (752)
    M  DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    M  DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpShMCreate: sizeof(comm_adm)     192000     (384)
    M  DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 04AF0040, size: 1974816)
    M  DpShMCreate: allocated sys_adm at 04AF0040
    M  DpShMCreate: allocated wp_adm at 04AF0560
    M  DpShMCreate: allocated tm_adm_list at 04AF2B90
    M  DpShMCreate: allocated tm_adm at 04AF2BB8
    M  DpShMCreate: allocated wp_ca_adm at 04C8F878
    M  DpShMCreate: allocated appc_ca_adm at 04C93EC8
    M  DpShMCreate: allocated comm_adm_list at 04C95638
    M  DpShMCreate: allocated comm_adm at 04C95650
    M  DpShMCreate: allocated ca_info at 04CC4450
    M  DpShMCreate: allocated wall_adm at 04CC4458
    X 
    X Sat May 18 00:27:28 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <EsNT> Memory Reset enabled as NT default
    X  ES initialized.
    M 
    M Sat May 18 00:27:33 2030
    M  calling db_connect ...
    C  Got ORACLE_HOME=C:\oracle\ora92 from environment
    C 
    C Sat May 18 00:28:05 2030
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C 
    C Sat May 18 00:28:06 2030
    C  Logon as OPS$-user to get SAPDEV's password
    C  Connecting as /@DEV on connection 0 ...
    C  Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
    C 
    C Sat May 18 00:28:17 2030
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C 
    C Sat May 18 00:28:33 2030
    C  Now I'm connected to ORACLE
    C  Got SAPDEV's password from table SAPUSER
    C  Got SAPDEV's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C 
    C Sat May 18 00:28:34 2030
    C  Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C  Now I'm connected to ORACLE
    C  Database NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
    B 
    B Sat May 18 00:28:35 2030
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT Date     Time   DBHost
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  20300518 002733 BW2003
    M 
    M Sat May 18 00:28:36 2030
    M  db_connect o.k.
    I 
    I Sat May 18 00:29:01 2030
    I  MtxInit: 0 0 0
    X 
    X Sat May 18 00:29:02 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13
    B  dbtbxbuf: Buffer TABL  (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
    B  dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 276 = 276
    B  2: 13 * 20 = 260
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 128 = 256000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 100 = 100
    B  7: 65 * 4 = 260
    B  8: 29385 * 128 = 3761280
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    I  *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
                  ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete.  [shmnt.c      2055]
    I  *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c      469]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Intel unknown
    Processor-Count           : 1
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 1
    NT Pagefile Informations
    Config. minimum size      : 589824 K
    Config. maximum size      : 1179648 K
    Avail.  maximum size      : 1179648 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    C:\pagefile.sys
    589824 K
    1179648 K
    1179648 K
    1178900 K
    NT Task Manager Informations
    Total Handles             :        0
    Total Threads             :        0
    Total Processes           :        0
    Commit Charge Total       :  1670224 K
    Commit Charge Limit       :  1676596 K
    Commit Charge Peak        :  1670376 K
    Phys.Memory Total         :        0 K
    Phys.Memory Available     :        0 K
    File Cache                :        0 K
    Kernel Memory Total       :        0 K
    Kernel Memory Paged       :        0 K
    Kernel Memory Nonpaged    :        0 K
    Memory usage of current process
    Total virt.address space  :  2097024 K
    Avail.virt.address space  :  1133576 K
    Private Pages             :        0 K
    Total heap size           :    10729 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :     4108 K
    Allocated heap memory     :     4406 K
    Moveable heap memory      :       24 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    4
    72 K
    2100 K
    0 K
    0 K
    3
    352
    smss.exe
    212 K
    448 K
    144 K
    160 K
    0
    424
    winlogon.exe
    996 K
    9048 K
    6188 K
    6580 K
    3
    468
    services.exe
    1276 K
    3136 K
    1436 K
    1564 K
    0
    480
    lsass.exe
    2148 K
    6544 K
    7048 K
    7048 K
    1
    676
    svchost.exe
    552 K
    2508 K
    832 K
    832 K
    0
    848
    svchost.exe
    4840 K
    22520 K
    13348 K
    19208 K
    9
    972
    spoolsv.exe
    712 K
    4060 K
    3220 K
    3228 K
    1
    1124
    svchost.exe
    392 K
    1956 K
    476 K
    476 K
    0
    1176
    agntsrvc.exe
    948 K
    7720 K
    9128 K
    9128 K
    1
    1196
    TNSLSNR.exe
    2432 K
    5720 K
    5764 K
    5776 K
    1
    1212
    cmd.exe
    384 K
    1572 K
    1488 K
    1488 K
    0
    1228
    ORACLE.EXE
    122564 K
    135924 K
    203080 K
    205256 K
    38
    1324
    SAPSTARTSRV.EXE
    2520 K
    13364 K
    14828 K
    14828 K
    3
    1420
    VMwareService.exe
    928 K
    2164 K
    604 K
    604 K
    0
    1528
    dbsnmp.exe
    2240 K
    11312 K
    13608 K
    39264 K
    3
    1816
    Explorer.EXE
    2928 K
    15120 K
    10200 K
    10332 K
    13
    1864
    jusched.exe
    252 K
    1764 K
    432 K
    432 K
    0
    1872
    VMwareTray.exe
    724 K
    3144 K
    852 K
    888 K
    0
    1880
    VMwareUser.exe
    1376 K
    3284 K
    1032 K
    1048 K
    0
    1996
    svchost.exe
    488 K
    3740 K
    1440 K
    21664 K
    1
    216
    svchost.exe
    800 K
    3708 K
    2788 K
    2788 K
    0
    2080
    sapinst.exe
    82868 K
    105272 K
    84324 K
    105292 K
    41
    2088
    javaw.exe
    6944 K
    21272 K
    20396 K
    20896 K
    6
    2200
    startsap.exe
    460 K
    1772 K
    748 K
    748 K
    0
    2212
    sapstart.exe
    1244 K
    3176 K
    1188 K
    1188 K
    0
    2276
    disp+work.exe
    [DP] DEV_00
    26740 K
    42464 K
    30176 K
    30176 K
    10
    2312
    gwrd.EXE
    [GW] DEV_00
    1852 K
    6116 K
    3936 K
    8208 K
    1
    2320
    icman.EXE
    56440 K
    60192 K
    75880 K
    75880 K
    17
    2328
    disp+work.EXE
    [WP] DEV_00
    10700 K
    11516 K
    43684 K
    43788 K
    7
    2336
    disp+work.EXE
    [WP] DEV_00
    6696 K
    13084 K
    42180 K
    42180 K
    6
    2344
    disp+work.EXE
    [WP] DEV_00
    10896 K
    14092 K
    42180 K
    42180 K
    6
    2352
    disp+work.EXE
    [WP] DEV_00
    10088 K
    14588 K
    42176 K
    42176 K
    6
    2360
    disp+work.EXE
    [WP] DEV_00
    9320 K
    12960 K
    42184 K
    42184 K
    6
    2368
    disp+work.EXE
    [WP] DEV_00
    9480 K
    13076 K
    42184 K
    42184 K
    6
    2376
    disp+work.EXE
    [WP] DEV_00
    10060 K
    13220 K
    42180 K
    42180 K
    6
    2384
    disp+work.EXE
    [WP] DEV_00
    10024 K
    15128 K
    42184 K
    42184 K
    6
    2392
    disp+work.EXE
    [WP] DEV_00
    6576 K
    14752 K
    42180 K
    42180 K
    6
    2400
    disp+work.EXE
    [WP] DEV_00
    8812 K
    13436 K
    42184 K
    42184 K
    6
    2408
    disp+work.EXE
    [WP] DEV_00
    8552 K
    16140 K
    42180 K
    42180 K
    6
    2416
    disp+work.EXE
    25744 K
    25972 K
    41644 K
    43788 K
    10
    2424
    disp+work.EXE
    [WP] DEV_00
    6848 K
    11060 K
    42180 K
    42180 K
    6
    Sum
    460128 K
    1063904 K
    B  dbexpbuf[0]: Shm 54: create failed
    B  ***LOG BBF=> internal error in export/import buffer: object buf init fail   [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
    B  dbexpbuf: return code (sap_rc): 4
    B  Buffer 0 will not be available
    B  Unexpected returncode from db_exp_init(EXP_ATP) : 4
    B  db_objinit failed
    M  *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c  237]
    M  *** ERROR => ThIPCInit: hook failed [thxxhead.c   1656]
    M  ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1159]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   8437]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = -1
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    rfc_req = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
    M  *  ERROR       tskh_init: ThIPCInit
    M  *
    M  *  TIME        Sat May 18 00:29:02 2030
    M  *  RELEASE     620
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          17
    M  *  MODULE      thxxhead.c
    M  *  LINE        8569
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  237]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c   346]
    M  SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
    Thanks buddy
    waiting...

  • [Solved]Can't finish The Hobbit installation with virtual drive

    Is there any way that I could combine two iso files into one so that I could finish The Hobbit installation process.  I always get stuck at the point where it asks for the second disk and gnome-disk-utility won't unmount the first ISO because it's still in use by the installation process.
    I tried doing this
    $ sudo mount -t iso9660 -o loop disc1-mountpoint
    $ sudo mount -t iso9660 -o loop disc2-mountpoint
    $ sudo mkisofs -l -J -R -o dvd.iso disc1-mountpoint disc2-mountpoint
    and here's what I got
    I: -input-charset not specified, using utf-8 (detected in locale settings)
    Using BILBO000.ICO;1 for /bilbo.ico (bilbo.ico)
    Using AUTORUN000.INF;1 for /Autorun.inf (Autorun.inf)
    genisoimage: Error: '/media/dc/bilbo.ico' and '/media/live/bilbo.ico' have the same Rock Ridge name 'bilbo.ico'.
    genisoimage: Error: '/media/dc/Autorun.inf' and '/media/live/Autorun.inf' have the same Rock Ridge name 'Autorun.inf'.
    Unable to sort directory
    NOTE: multiple source directories have been specified and merged into the root
    of the filesystem. Check your program arguments. genisoimage is not tar.
    So here's what I'm currently trying right now.
    $ cat HobbitCD1.iso > The_Hobbit.iso
    $ cat HobbitCD2.iso >> The_Hobbit.iso
    Okay, so doing that didn't return any errors, now to see if I can finish the installation with the new ISO file.
    Nope it still asks for disk 2.  So the real question is how can I force the first disk to unmount so that I can replace it with the second disk?
    Last edited by lspci (2012-08-23 22:40:14)

    progandy wrote:Why don't you try this?
    Manually mount the first iso image, begin installation, forcibly unmount old iso, mount new iso, continue installation.
    Oh, you can forcibly unmount something?! 
    (read the manpage for umount)
    Oh, whaddaya know, you can. 
    from umount's manpage
    -f Force umount (in case of an unreachable NFS system). (Requires kernel 2.1.116 or later.)
    I dunno why I didn't think to check the manpage for umount.  Sorry, my bad.
    EDIT: Okay, so forcibly unmounting the iso didn't work.  I was able to force umount, but I couldn't disassociate the /dev/loop2 from the HobbitCD1.iso file.  losetup doesn't seem to support forcing.  I think that I better just install this under Windows and then copy and paste the installed files to my external hard drive and then move them onto my laptop from there.  =/ Not really what I was looking for, though.
    Last edited by lspci (2012-07-30 11:53:58)

  • Can Packagemaker create installer with content files outside the bundle?

    I'm trying to create an installer with Packagemaker, but the content files need to be outside the final bundle because they're shared with a Windows installer.
    I thought I could create a symbolic link to the external folder, but instead of linking from the installer, it copied the files into the bundle. Any idea how to do this, or if it's even possible? I need to be able to do this on 10.3+, if that's relevant.
    (I can give a more specific scenario if this isn't clear enough)
    Thanks!

    zekel wrote:
    The main issue I'd be worried about is that the external files (which are quite large) won't have the appropriate progress bar. The external files are around 1GB, while the internal files are in the 30MB range.
    How about installing a secondary installer with progress bar that copies these files from the correct location. Your postflight script can just kick off the newly installed file copier.
    How's this sound for a hack...
    Have a launcher script copy the installer to /tmp, then modify the package to point my files. (I'm installing from read-only media.) It would then open the modified installer which would pull my files from the DVD. This would probably work better (read: at all) if the files aren't compressed inside the package. Do you know if that's an option?
    No, sorry. The internals of a package are quite specific. You need PackageMaker itself to build them.
    Things like the receipts are non-essential at this point, only because if I can't get this to work then we will continue to use our terrible installer which leaves none of those things. Those shouldn't be too much trouble if I can get the rest to work.
    There are some 3rd party installers like Installer VISE. The sad part is that they tend to make the MacOS X Installer look good.
    If the guy responsible for that is interested I'll show him Inno Setup, but we have a working Windows installer, so he probably won't want to mess with it.
    I agree, but tell him about it anyway. The next time you have to build a Windows installer, he could use Inno Setup and get it done in a couple of hours and then have time to help with the mess that is software deployment on MacOS X.

  • Oracle 11gR2 RAC installation with DNS

    Dear Guru's,
    I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
    O.S: RHEL5.4(64 bit)
    Oracle Version: 11gR2(11.2.0.2)
    Note: Am creating nodes in VMware ESXi server.
    Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
    Bala :)

    Hi Bala,
    I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
    There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
    And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
    - http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
    - http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
    - http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
    Very good videos:
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
    Hope it helps,
    Best regards,
    Gena

  • AddOn installer for C# in SAP 2004

    Hi,
    I have a question. Is there an AddOn Installer for C# in SAP 2004? Or do I have to write it by myself?
    Regards,
    Hmg

    Hi Szymon,
    You can use B1DE package you can donwload for free from SDN. It will create an installer in Vb.NET but it is very easy to adapt the code to C#.
    Regards
    Trinidad.

Maybe you are looking for